Structural evolution and atomic dynamics in Ni-Nb metallic glasses: A molecular dynamics study.

The composition and temperature dependence of static and dynamic structures in NixNb1-x (x = 50-70 at. %) were systematically studied using molecular dynamics with a new-released semi-empirical embedded atom method potential by Mendelev. The calculated pair correlation functions and the structure factor match well with the experimental data, demonstrating the reliability of the potential within relatively wide composition and temperature ranges. The local atomic structures were then characterized by bond angle distributions and Voronoi tessellation methods, demonstrating that the icosahedral ⟨0,0,12,0⟩ is only a small fraction in the liquid state but increases significantly during cooling and becomes dominant at 300 K. The most abundant clusters are identified as ⟨0,0,12,0⟩ and distorted icosahedron ⟨0,2,8,2⟩. The large fraction of these two clusters hints that the relatively good glass forming ability is near the eutectic point. Unlike Cu-Zr alloys, both the self-diffusion coefficient and shear viscosity are insensitive to compositions upon cooling in Ni-Nb alloys. The breakdown of the Stokes-Einstein relation happens at around 1.6Tg (Tg: glass transition temperature). In the amorphous state, the solid and liquid-like atoms can be distinguished based on the Debye-Waller factor ⟨u2⟩. The insensitivity of the dynamic properties of Ni-Nb alloys to compositions may result from the relatively simple solidification process in the phase diagram, in which only one eutectic point exists in the studied composition range.

Structural Signature of ß-Relaxation in La-Based Metallic Glasses.

The secondary ß-relaxation is an intrinsic feature in glassy materials. However, its structural origin is still not well understood. Here we report that the ß-relaxations in La50Al15Ni35 and La50Al15Cu35 metallic glasses (MGs) mainly depend on the vibration of small Ni and Cu atoms in local cages. By using advanced synchrotron X-ray techniques and theoretical calculations, we elucidate that the tricapped-trigonal-prism-like polyhedra with more large La atoms in shells favor the local vibration of center Ni atoms, leading to the pronounced ß-relaxation event. In contrast, the in-cage vibration of Cu atoms is somehow suppressed by the appearance of more shell Cu atoms. Nevertheless, they could easily diffuse out of the cages compared with Ni, thus triggering the onset of α-relaxation. This work provides a pathway to understand the different structural relaxation behaviors in MGs and other disordered materials from their local atomic packing and dynamics points of view.

Structure and dynamical properties of liquid Ni64Zr36 and Ni65Hf35 alloys: an ab initio molecular dynamics study.

Ab initio molecular dynamics simulations are performed to investigate the atomic structures and dynamics of Ni64Zr36 and Ni65Hf35 metallic liquids in a temperature range of 1400-2500 K. Calculated results are in good agreement with recently reported high temperature experimental data. Local atomic structures are analyzed and compared for Ni64Zr36 and Ni65Hf35 metallic liquids in terms of average bond length, coordination number, Honey-Andersen index, Bond-orientation order, spatial correlation and Voronoi tessellation methods. It is found that Zr-Zr bonds have larger average length of 3.32 Å than 3.22 Å for Hf-Hf bonds, causing sluggish diffusion in Ni65Hf35 liquids. Zr and Hf atom-centered clusters with higher coordination numbers are inclined to aggregate with high-coordinated clusters, while Ni atom-centered clusters with lower coordination numbers prefer to avoiding to be the nearest neighbor with each other. Temperature dependent diffusion coefficients reveal the decoupled diffusion in both liquids, which are related with different spatial correlations for Ni- and Zr- (or Hf-) centered clusters.

Temperature dependent structural evolution in liquid Ag50Ga50 alloy.

The temperature dependence of atomic structural evolution in liquid Ag50Ga50 alloy has been studied using an in situ high energy x-ray diffraction (XRD) experiment combined with first-principles molecular dynamics (FPMD) simulations. The experimental data show a reversible structural crossover at the temperature of about 1050 K. Changes in both electrical resistivity and absolute thermoelectric power at about 1100 K strongly support the XRD results. Additionally, FPMD simulations reveal the abnormal temperature dependent behavior of partial coordination number and atomic diffusivity at about 1200 K, elucidating that the partition experimentally observed changes in structure and properties could be linked with the repartition between Ag and Ga atoms in the liquid at around 1050-1200 K. This finding will trigger more studies on the structural evolution of noble-polyvalent metals in particular and metallic liquids in general.

Second amorphous-to-crystalline phase transformation in Cu(60)Ti(20)Zr(20) bulk metallic glass.

The second amorphous-to-crystalline phase transformation in Cu(60)Ti(20)Zr(20) bulk metallic glass was investigated by differential scanning calorimetry and x-ray diffractometry. The difference of the Gibbs free energies between the amorphous phase and the crystalline products during the transformation is estimated to be about 2.46 kJ mol(-1) at 753 K, much smaller than the 61 kJ mol(-1) obtained assuming that it is a polymorphic transformation. It was revealed that the phase transformation occurs through a eutectic crystallization of Cu(51)Zr(14) and Cu(2)TiZr, having an effective activation energy of the order of 400 kJ mol(-1). The average Avrami exponent n is about 2.0, indicating that the crystallization is diffusion controlled.

Comparative study of crystallization process in metallic melts using ab initio molecular dynamics simulations.

The crystallization process of liquid metals is studied using ab initio molecular dynamics simulations. The evolution of short-range order during quenching in Pb and Zn liquids is compared with body-centered cubic (bcc) Nb and V, and hexagonal closed-packed (hcp) Mg. We found that the fraction and type of the short-range order depends on the system under consideration, in which the icosahedral symmetry seems to dominate in the body-centered cubic metals. Although the local atomic structures in stable liquids are similar, liquid hcp-like Zn, bcc-like Nb and V can be deeply supercooled far below its melting point before crystallization while the supercooled temperature range in liquid Pb is limited. Further investigations into the nucleation process reveal the process of polymorph selection. In the body-centered cubic systems, the polymorph selection occurs in the supercooled state before the nucleation is initiated, while in the closed-packed systems it starts at the time of onset of crystallization. Atoms with bcc-like lattices in all studied supercooled liquids are always detected before the polymorph selection. It is also found that the bond orientational ordering is strongly correlated with the crystallization process in supercooled Zn and Pb liquids.

Size effect on atomic structure in low-dimensional Cu-Zr amorphous systems.

The size effect on atomic structure of a Cu64Zr36 amorphous system, including zero-dimensional small-size amorphous particles (SSAPs) and two-dimensional small-size amorphous films (SSAFs) together with bulk sample was investigated by molecular dynamics simulations. We revealed that sample size strongly affects local atomic structure in both Cu64Zr36 SSAPs and SSAFs, which are composed of core and shell (surface) components. Compared with core component, the shell component of SSAPs has lower average coordination number and average bond length, higher degree of ordering, and lower packing density due to the segregation of Cu atoms on the shell of Cu64Zr36 SSAPs. These atomic structure differences in SSAPs with various sizes result in different glass transition temperatures, in which the glass transition temperature for the shell component is found to be 577 K, which is much lower than 910 K for the core component. We further extended the size effect on the structure and glasses transition temperature to Cu64Zr36 SSAFs, and revealed that the T g decreases when SSAFs becomes thinner due to the following factors: different dynamic motion (mean square displacement), different density of core and surface and Cu segregation on the surface of SSAFs. The obtained results here are different from the results for the size effect on atomic structure of nanometer-sized crystalline metallic alloys.

Pressure-induced structural change in liquid GaIn eutectic alloy.

Synchrotron x-ray diffraction reveals a pressure induced crystallization at about 3.4 GPa and a polymorphic transition near 10.3 GPa when compressed a liquid GaIn eutectic alloy up to ~13 GPa at room temperature in a diamond anvil cell. Upon decompression, the high pressure crystalline phase remains almost unchanged until it transforms to the liquid state at around 2.3 GPa. The ab initio molecular dynamics calculations can reproduce the low pressure crystallization and give some hints on the understanding of the transition between the liquid and the crystalline phase on the atomic level. The calculated pair correlation function g(r) shows a non-uniform contraction reflected by the different compressibility between the short (1st shell) and the intermediate (2nd to 4th shells). It is concluded that the pressure-induced liquid-crystalline phase transformation likely arises from the changes in local atomic packing of the nearest neighbors as well as electronic structures at the transition pressure.

Composition- and temperature-dependent liquid structures in Al-Cu alloys: an ab initio molecular dynamics and x-ray diffraction study.

The composition- and temperature-dependent liquid structures in eight Alrich-Cu binary alloys (from hypoeutectic Al93Cu7 to hypereutectic Al70Cu30) have been experimentally and computationally studied by x-ray diffraction (XRD) experiments and ab initio molecular dynamics (AIMD) simulations. The remarkable agreements of structure factors for all liquid Alrich-Cu alloys obtained from high-temperature high-energy XRD measurements and AIMD simulations have been achieved, which consolidates the analyses of structural evolutions in Alrich-Cu liquids during the cooling processing by AIMD simulations. The heat capacity of liquid Alrich-Cu alloys continuously increases and presents no abnormal peak when reducing the temperature, which differs from the reported prediction for 55-atom Alrich-Cu nanoliquids. The diffusivities of Al and Cu undergo an increasing deviation from Arrhenius behavior by tuning Cu concentration from 7 to 30 atomic percentages, correlated to the local ordering in these liquids by means of coordination number, bond-angle distribution, Honeycutt-Andersen index, bond-orientational order and Voronoi tessellation analyses. Upon cooling, the microstructure of the liquid Alrich-Cu alloys inclines to form Al2Cu crystal-like local atomic ordering, especially in the hypereutectic liquids. The favorable short-range ordering between Cu and Al atoms could cause the non-Arrhenius diffusion behavior.

Deformation behavior of metallic glasses with shear band like atomic structure: a molecular dynamics study.

Molecular dynamics simulations were employed to investigate the plastic deformation within the shear bands in three different metallic glasses (MGs). To mimic shear bands, MG specimens were first deformed until flow localization occurs, and then the volume of the material within the localized regions was extracted and replicated. Homogeneous deformation that is independent of the size of the specimen was observed in specimens with shear band like structure, even at a temperature that is far below the glass transition temperature. Structural relaxation and rapid cooling were employed to examine the effect of free volume content on the deformation behavior. This was followed by detailed atomic structure analyses, employing the concepts of Voronoi polyhedra and "liquid-like" regions that contain high fraction of sub-atomic size open volumes. Results suggest that the total fraction of atoms in liquid-like regions is a key parameter that controls the plastic deformation in MGs. These are discussed in the context of reported experimental results and possible strategies for synthesizing monolithic amorphous materials that can accommodate large tensile plasticity are suggested.

Nucleotide sequence and growth hormone-regulated expression of salmon insulin-like growth factor I mRNA.

Protein and cDNA sequence analysis have revealed that the insulin-like growth factor (IGF-I) has been highly conserved among several mammalian species. Using the combined techniques of polymerase chain reaction and molecular cloning, we have now obtained the cDNA sequence encoding preproIGF-I from a teleost species, Oncorhynchus kisutch (coho salmon). The 2020 nucleotide (nt) cloned cDNA sequence contains a 528 nt open reading frame encoding 176 amino acids in preproIGF-I and 175 nt and 1317 nt of flanking 5'- and 3'-untranslated regions, respectively. The deduced amino acid sequence of salmon IGF-I is highly conserved relative to its mammalian homologues and there are only 14 amino acid differences out of 70 between salmon and human IGF-I. Interestingly, the C-terminal E domain of salmon proIGF-I, which is presumed to be proteolytically cleaved during biosynthesis, also shows striking amino acid sequence homology with its mammalian counterpart, except for an internal 27 residue segment that is unique to salmon proIGF-I. Northern analysis revealed that salmon preproIGF-I mRNA consists predominantly of a single 3900 nt sized band although minor bands were also observed after prolonged autoradiographic exposure. The RNA analysis also revealed that the level of preproIGF-I mRNA is increased 6-fold in liver RNA isolated from salmon injected with bovine GH, as compared to untreated controls. These results demonstrate that the primary structure and regulated expression of IGF-I by GH have been conserved in teleosts.

Familial hyperproinsulinemia associated with NIDDM. A case study.

OBJECTIVE: To report studies on an elderly patient with moderate NIDDM associated with marked fasting hyperinsulinemia. RESEARCH DESIGN AND METHODS: The propositus and several family members were studied by a combination of clinical, biochemical, and molecular genetic approaches to define the underlying genetic defect. RESULTS: Fasting levels of contrainsulin hormones were normal, and resistance to exogenous insulin was absent. Gel filtration and reverse-phase high-performance liquid chromatography revealed elevated amounts of a structurally abnormal proinsulin intermediate (AC proinsulin). A study of the family of the propositus showed the same abnormality in 4 of 5 members in 3 successive generations. Genetic analysis revealed a point mutation affecting residue 65 of human proinsulin (Arg-->His) in one allele of the insulin gene in the propositus, a defect similar to that described previously in 3 other apparently unrelated lineages. CONCLUSIONS: This family exhibits a clear-cut relationship between increasing age and metabolic decompensation in all the hyperproinsulinemic members, suggesting that (inherited) metabolic stress and age both contribute to development of diabetes mellitus.

Atomic picture of elastic deformation in a metallic glass.

The tensile behavior of a Ni60Nb40 metallic glass (MG) has been studied by using ab initio density functional theory (DFT) calculation with a large cell containing 1024 atoms (614 Ni and 410 Nb). We provide insight into how a super elastic limit can be achieved in a MG. Spatially inhomogeneous responses of single atoms and also major polyhedra are found to change greatly with increasing external stress when the strain is over 2%, causing the intrinsically viscoelastic behavior. We uncover the origin of the observed super elastic strain limit under tension (including linear and viscoelastic strains) in small-sized MG samples, mainly caused by inhomogeneous distribution of excess volumes in the form of newly formed subatomic cavities.

Evolution of atomic structure in Al75Cu25 liquid from experimental and ab initio molecular dynamics simulation studies.

X-ray diffraction and electrostatic levitation measurements, together with the ab initio molecular dynamics simulation of liquid Al(75)Cu(25) alloy have been performed from 800 to 1600 K. Experimental and ab initio molecular dynamics simulation results match well with each other. No abnormal changes were experimentally detected in the specific heat capacity over total hemispheric emissivity and density curves in the studied temperature range for a bulk liquid Al(75)Cu(25) alloy measured by the electrostatic levitation technique. The structure factors gained by the ab initio molecular dynamics simulation precisely coincide with the experimental data. The atomic structure analyzed by the Honeycutt-Andersen index and Voronoi tessellation methods shows that icosahedral-like atomic clusters prevail in the liquid Al(75)Cu(25) alloy and the atomic clusters evolve continuously. All results obtained here suggest that no liquid-liquid transition appears in the bulk liquid Al(75)Cu(25) alloy in the studied temperature range.

Preliminary crystallographic analysis of deshexapeptide (B25-B30) insulin.

Satisfactory single crystals of deshexapeptide (B25-B30) insulin for X-ray crystal structure analysis have been grown in citrate buffer by the method of hanging-drop gas phase diffusion. The crystal belongs to the monoclinic system with space group C2. The unit cell constants are a = 42.6 A, b = 37.9 A, c = 27.2 A, beta = 125.4 degrees and there is only one molecule of deshexapeptide insulin in an asymmetric unit.

The crystallization process of liquid vanadium studied by ab initio molecular dynamics.

We present a study of the crystallization process in liquid vanadium over a temperature range from 3000 K down to 1500 K using ab initio molecular dynamics simulations. Short-range order evolution during solidification is studied using various structural analysis methods. We show that the icosahedral-like short-range order is detected in the stable liquid phase and grows upon supercooling. The system undergoes a first-order phase transition (from a liquid to a solid state) at a temperature of about 1600 K. The crystal nucleation process is further studied using the time-temperature transformation mechanism by annealing the system at 1650 K. The nucleation is examined using bond-orientational order and density fluctuation analysis. Our finding is that various precursors appear in the region of high bond-orientational order with the majority having body-centered cubic (bcc)-like symmetry. This bcc-like region grows on annealing via thermal fluctuations. Our results reveal that the bond-orientational order precedes the density fluctuation, and is the main driving factor for nucleation.

Atomic structure evolution during solidification of liquid niobium from ab initio molecular dynamics simulations.

Atomic structure transitions of liquid niobium during solidification, at different temperatures from 3200 to 1500 K, were studied by using ab initio molecular dynamics simulations. The local atomic structure variations with temperature are investigated by using the pair-correlation function, the structure factor, the bond-angle distribution function, the Honeycutt-Anderson index, Voronoi tessellation and the cluster alignment methods. Our results clearly show that, upon quenching, the icosahedral short-range order dominates in the stable liquid and supercooled liquid states before the system transforms to crystalline body-center cubic phase at a temperature of about 1830 K.

Super elastic strain limit in metallic glass films.

On monolithic Ni-Nb metallic glass films, we experimentally revealed 6.6% elastic strain limit by in-situ transmission electron microscopy observations. The origin of high elastic strain limit may link with high free volume in the film, causing the rearrangement of loosely bonded atomic clusters (or atoms) upon elastic deformation. This high elastic limit of metallic glass films will shed light on new application fields for metallic glasses, and also trigger more studies for deformation mechanism of amorphous materials in general.

Pressure-induced amorphous-to-amorphous configuration change in Ca-Al metallic glasses.

Pressure-induced amorphous-to-amorphous configuration changes in Ca-Al metallic glasses (MGs) were studied by performing in-situ room-temperature high-pressure x-ray diffraction up to about 40 GPa. Changes in compressibility at about 18 GPa, 15.5 GPa and 7.5 GPa during compression are detected in Ca(80)Al(20), Ca(72.7)Al(27.3), and Ca(66.4)Al(33.6) MGs, respectively, whereas no clear change has been detected in the Ca(50)Al(50) MG. The transfer of s electrons into d orbitals under pressure, reported for the pressure-induced phase transformations in pure polycrystalline Ca, is suggested to explain the observation of an amorphous-to-amorphous configuration change in this Ca-Al MG system. Results presented here show that the pressure induced amorphous-to-amorphous configuration is not limited to f electron-containing MGs.