Improving the risk management process in quality management systems of higher education.

The purpose of this paper is to improve the risk management process in the quality management system of higher education, taking into account the hazardous factors that increase the probability of occurrence and severity of consequences of undesirable events, as well as favorable factors that reduce the probability of occurrence and severity of consequences of hazardous events. The basis of risk management in the quality management systems of higher education institutions is the "Bowtie" method, which involves six main steps of identifying inconsistency, determining the impact of hazardous and favorable factors according to the impact group, ranking hazardous and favorable factors, calculating risk, substantiating precautionary measures and checking calculations. To rank hazardous and favorable factors, the authors used the "Decision Making Trial and Evaluation" method (hereinafter-DE-MATEL), which is based on paired comparison and decision-making tools based on graph theory. An improved process is proposed for risk assessment, which differs from the known ones by the presence of the identification of the cause-and-effect relationship "hazard (inconsistency)-hazardous event-consequences", identification of hazardous and favorable factors of the internal and external environment that affect the probability and/or the degree of severity of a hazardous event-the appearance of an inconsistency, which is carried out after the inconsistency has been determined; determination of causal hazardous and favorable factors by an acceptable method. Registers of inconsistencies (hazards), hazardous and favorable factors have been developed and proposed based on the requirements for accreditation of educational programs and the international standard ISO 9001:2015, which will allow, based on a risk-oriented approach, to provide a basis for setting the goals of a higher education institution under martial law in order to guarantee effective implementation of the mission and strategy. They are proposed for decision-making in the quality management systems of educational organizations on the substantiation of precautionary or corrective measures based on ranking the risks from identified inconsistencies, which are determined taking into account the impact of the entire set of identified significant hazardous and favorable factors. The value of this paper is to improve the quality risk management process in educational organizations, taking into account the impact of hazardous and favorable factors, and to develop an appropriate step-by-step algorithm of actions and a risk assessment form.

Ergonomic risk management process for safety and health at work.

Purpose: The paper aims to provide the main principles and practical aspects of the model, to present the process of identifying, determining the level, as well as assessing and managing occupational and ergonomic risks. Methods: To conduct the research, as well as to identify the influence of various dangerous factors related to the working posture, pace, rhythm of work performance, equipment and individual characteristics of the employee's health condition, methods of complex analysis and synthesis, formal and dialectical logic are used to study the essence of the concept of occupational and ergonomic risks. Additionally, induction and deduction methods are used to examine the cause-and-effect relationships between dangers, dangerous factors, dangerous event, and the severity of consequences to determine the level of occupational and ergonomic risks based on the improved bow-tie model. The proposed approach effectiveness is tested based on the assessment of occupational and ergonomic risks of forest workers (loggers) with the participation of five experts to identify dangerous factors and develop precautionary measures. Results: An algorithm for managing occupational and ergonomic risks has been developed, consisting of eleven steps, which can be divided into three steps: preparatory, main and documented. It has been determined that occupational and ergonomic risk is the probability of a dangerous event occurring due to employee's physical overload and its impact on the severity of damage to the employee's physical health. The level of occupational and ergonomic risk management is determined taking into account the probability (frequency), intensity and duration of physical overload, as well as the employee's adaptation index to physical overload and his/her health index. Conclusion: The novelty is the substantiation of the principles of occupational and ergonomic risk management, which are based on the bow-tie model and predict the impact on the probability and severity of consequences of a dangerous event, taking into account dangerous factors. Forms for drawing up occupational and ergonomic risk maps have been developed, in which it is necessary to consider interaction of occupational hazards and occupational-ergonomic risk - physical overload.

Improvement of the occupational risk management process in the work safety system of the enterprise.

Purpose: The research purpose is to improve the management of occupational risks associated with hazards as well as the organization's capabilities to identify hazardous factors (HFs) using the "BOW-TIE" method in accordance with the provisions of the ISO 45001:2019 standard. Methods: To improve occupational risk management, the "BOW-TIE" method has been introduced into occupational health and safety management systems. This approach facilitates a comprehensive description and analysis of potential risk development from identifying hazardous factors to studying the consequences. It visually integrates fault and event trees to provide a holistic view of risk dynamics. Results: The improvement of the occupational hazard risk management process considers both internal and external factors affecting the organization, thereby increasing the probability and severity of potential hazardous events. The revised approach categorizes risk levels as acceptable, unacceptable, or verifiable. In addition, occupational risk management requires an in-depth analysis of the organization's external and internal environment to identify hazards that affect the probability and severity of potential hazardous events. Conclusion: This research proposes an innovative approach to occupational risk management by determining the magnitude of occupational risk as the cumulative result of assessing risks associated with all external and internal factors influencing the probability of hazardous event occurring. The introduction of the "BOW-TIE" method, combined with a comprehensive analysis of the organizational environments, facilitates a more effective and nuanced approach to occupational risk management.

Methodology for assessing the risk of incidents during passenger road transportation using the functional resonance analysis method.

Safety of passenger road transportation (PRT) is a global problem considered by scientists. The present study is aimed at PRT safety improvement by developing its advanced model with accident risk minimization. Functional Resonance Analysis Method is used to identify factors influencing PRT safety. Accident risk assessment of the combined action of several factors in PRT is based on a phenomenological model. Possible good and bad PRT scenarios were considered differing in the staff professional experience, work shift duration, speed, vehicle service lifetime, and driver's stress load. Method for quantitative assessment of five main functions in PRT with their variability caused by parameters changes was designed. The proposed criteria were used to assess the parameter's deviations from their normative values and determine the major characteristics of each function. The recommendations for monitoring the driver's psychophysiological state at all transportation stages were developed and the relationship of transportation functions characteristics and criteria affecting passenger safety was established. This methodology enables assessing the PRT reliability level at a certain time. The approach allows evaluating the criteria affecting traffic safety, identifying their potential functionally resonant effect for abnormal PRT due to conditional changes; developing mechanisms to reduce accident risks by improving technical and organizational management.

Development of a Dust Respirator by Improving the Half Mask Frame Design.

Protective efficiency of filtering dust respirators depends on the properties of filter materials from which filters are made and the structure of a half mask frame, which influences how tightly the respirator fits the face. The conducted studies on the "Lepestok 40" dust respirator revealed a large air leakage through the gaps occurring along the obturation strip. Therefore, the purpose of the study is to develop a dust respirator to provide high level of protection and usability by improving the half mask frame design. A scheme for designing a dust respirator: analysis of operating conditions for the dust respirator; facial anthropometric measurements of potential users; designing a 3D model of half mask frame; laboratory testing of the protective properties of the product. A distinctive feature of this approach is considering the facial anthropometric dimensions of employees of a particular enterprise, standard sizes formation of 3D facial models, which is the basis for designing a half mask frame for dust respirator. A new half mask frame design for dust respirator with a variable geometry of fitting to the face surface has been developed, due to special attachment points that allow changing its size according to the anthropometric dimensions of user's face.