Activation of endogenous cadmium from biochar under simulated acid rain enhances the accumulation risk of lettuce (Lactuca sativa L.).

Biochar has been widely applied to remediate heavy metal-contaminated soils, but the environmental risk of the endogenous pollutants in biochar remains unclear. Two biochars with different endogenous cadmium (Cd) concentrations were prepared from background soil (BCB) and contaminated soil (BCC), respectively. We studied the effects of simulated acid rain (SAR) on the activation mechanism of endogenous Cd in biochar and Cd uptake of Cd by lettuce from the biochar-amended soils. SAR aging significantly increased Cd bioavailability by 27.5 % and 53.9 % in BCB and BCC, respectively. The activation of Cd from biochar may be due to the decrease of biochar pH and persistent free radicals (PFRs) and the increase of specific surface area (SSA) and O-contained functional groups in biochars. Two biochars at dosages of 2 % and 5 % rates did not change soil pore water Cd, but BCB and BCC at 10 % increased pore water Cd by 17.3 % and 219 %, respectively after SAR aging. SAR aging significantly increased the bioavailability of Cd in BCB and BCC treated soils than those before SAR aging. BCB application enhanced the biomass of lettuce (Lactuca sativa L.) and decreased the uptake of Cd. However, BCC addition at 10 % decreased the biomass of lettuce and increased the accumulation of Cd. In summary, endogenous Cd in biochar from contaminated soils has a potential environmental risk to plants and human health and the negative effects of endogenous pollutants from the biochars should be further investigated.

Cortical surface registration using unsupervised learning.

Non-rigid cortical registration is an important and challenging task due to the geometric complexity of the human cortex and the high degree of inter-subject variability. A conventional solution is to use a spherical representation of surface properties and perform registration by aligning cortical folding patterns in that space. This strategy produces accurate spatial alignment, but often requires high computational cost. Recently, convolutional neural networks (CNNs) have demonstrated the potential to dramatically speed up volumetric registration. However, due to distortions introduced by projecting a sphere to a 2D plane, a direct application of recent learning-based methods to surfaces yields poor results. In this study, we present SphereMorph, a diffeomorphic registration framework for cortical surfaces using deep networks that addresses these issues. SphereMorph uses a UNet-style network associated with a spherical kernel to learn the displacement field and warps the sphere using a modified spatial transformer layer. We propose a resampling weight in computing the data fitting loss to account for distortions introduced by polar projection, and demonstrate the performance of our proposed method on two tasks, including cortical parcellation and group-wise functional area alignment. The experiments show that the proposed SphereMorph is capable of modeling the geometric registration problem in a CNN framework and demonstrate superior registration accuracy and computational efficiency. The source code of SphereMorph will be released to the public upon acceptance of this manuscript at https://github.com/voxelmorph/spheremorph.

Matrix completion by deep matrix factorization.

Conventional methods of matrix completion are linear methods that are not effective in handling data of nonlinear structures. Recently a few researchers attempted to incorporate nonlinear techniques into matrix completion but there still exists considerable limitations. In this paper, a novel method called deep matrix factorization (DMF) is proposed for nonlinear matrix completion. Different from conventional matrix completion methods that are based on linear latent variable models, DMF is on the basis of a nonlinear latent variable model. DMF is formulated as a deep-structure neural network, in which the inputs are the low-dimensional unknown latent variables and the outputs are the partially observed variables. In DMF, the inputs and the parameters of the multilayer neural network are simultaneously optimized to minimize the reconstruction errors for the observed entries. Then the missing entries can be readily recovered by propagating the latent variables to the output layer. DMF is compared with state-of-the-art methods of linear and nonlinear matrix completion in the tasks of toy matrix completion, image inpainting and collaborative filtering. The experimental results verify that DMF is able to provide higher matrix completion accuracy than existing methods do and DMF is applicable to large matrices.

Breast lesion classification based on supersonic shear-wave elastography and automated lesion segmentation from B-mode ultrasound images.

Supersonic shear-wave elastography (SWE) has emerged as a useful imaging modality for breast lesion assessment. Regions of interest (ROIs) were required to be specified for extracting features that characterize malignancy of lesions. Although analyses have been performed in small rectangular ROIs identified manually by expert observers, the results were subject to observer variability and the analysis of small ROIs would potentially miss out important features available in other parts of the lesion. Recent investigations extracted features from the entire lesion segmented by B-mode ultrasound images either manually or semi-automatically, but lesion delineation using existing techniques is time-consuming and prone to variability as intensive user interactions are required. In addition, rich diagnostic features were available along the rim surrounding the lesion. The width of the rim analyzed was subjectively and empirically determined by expert observers in previous studies after intensive visual study on the images, which is time-consuming and susceptible to observer variability. This paper describes an analysis pipeline to segment and classify lesions efficiently. The lesion boundary was first initialized and then deformed based on energy fields generated by the dyadic wavelet transform. Features of the SWE images were extracted from inside and outside of a lesion for different widths of the surrounding rim. Then, feature selection was performed followed by the Support Vector Machine (SVM) classification. This strategy obviates the empirical and time-consuming selection of the surrounding rim width before the analysis. The pipeline was evaluated on 137 lesions. Feature selection was performed 20 times using different sets of 14 lesions (7 malignant, 7 benign). Leave-one-out SVM classification was performed in each of the 20 experiments with a mean sensitivity, specificity and accuracy of 95.1%, 94.6% and 94.8% respectively. The pipeline took an average of 20 s to process a lesion. The fact that this efficient pipeline generated classification accuracy superior to that of existing algorithms suggests that improved efficiency did not compromise classification accuracy. The ability to streamline the quantitative assessment of SWE images will potentially accelerate the adoption of the combined use of ultrasound and elastography in clinical practice.

Carotid plaque segmentation from three-dimensional ultrasound images by direct three-dimensional sparse field level-set optimization.

Total plaque volume (TPV) measured from 3D carotid ultrasound has been shown to be able to predict cardiovascular events and is sensitive in detecting treatment effects. Manual plaque segmentation was performed in previous studies to quantify TPV, but is tedious, requires long training times and is prone to observer variability. This article introduces the first 3D direct volume-based level-set algorithm to segment plaques from 3D carotid ultrasound images. The plaque surfaces were first initialized based on the lumen and outer wall boundaries generated by a previously described semi-automatic algorithm and then deformed by a direct three-dimensional sparse field level-set algorithm, which enforced the longitudinal continuity of the segmented plaque surfaces. This is a marked advantage as compared to a previously proposed 2D slice-by-slice plaque segmentation method. In plaque boundary initialization, the previous technique performed a search on lines connecting corresponding point pairs of the outer wall and lumen boundaries. A limitation of this initialization strategy was that an inaccurate initial plaque boundary would be generated if the plaque was not enclosed entirely by the wall and lumen boundaries. A mechanism is proposed to extend the search range in order to capture the entire plaque if the outer wall boundary lies on a weak edge in the 3D ultrasound image. The proposed method was compared with the previously described 2D slice-by-slice plaque segmentation method in 26 three-dimensional carotid ultrasound images containing 27 plaques with volumes ranging from 12.5 to 450.0 mm3. The manually segmented plaque boundaries serve as the surrogate gold standard. Segmentation accuracy was quantified by volume-, area- and distance-based metrics, including absolute plaque volume difference (|ΔPV|), Dice similarity coefficient (DSC), mean and maximum absolute distance (MAD and MAXD). The proposed direct 3D plaque segmentation algorithm was associated with a significantly lower |ΔPV|, MAD and MAXD, and a significantly higher DSC compared to the previously described slice-by-slice algorithm (|ΔPV|:p=0.012, DSC: p=2.1×10-4, MAD: p=1.3×10-4, MAXD: p=5.2×10-4). The proposed 3D volume-based algorithm required 72±22 s to segment a plaque, which is 40% lower than the 2D slice-by-slice algorithm (114±18 s). The proposed automatic plaque segmentation method generates accurate and reproducible boundaries efficiently and will allow for streamlining plaque quantification based on 3D ultrasound images.

Sensitive three-dimensional ultrasound assessment of carotid atherosclerosis by weighted average of local vessel wall and plaque thickness change.

PURPOSE: Vitamin B deficiency has been identified as a risk factor for vascular events. However, the reduction of vascular events was not shown in large randomized controlled trials evaluating B-Vitamin therapy. There is an important requirement to develop sensitive biomarkers to be used as efficacy targets for B-Vitamin therapy as well as other dietary treatments and lifestyle regimes that are being developed. Carotid vessel-wall-plus-plaque thickness change (VWT-Change) measured from 3D ultrasound has been shown to be sensitive to atorvastatin therapies in previous studies. However, B-Vitamin treatment is expected to confer a smaller beneficial effect in carotid atherosclerosis than the strong dose of atorvastatin. This paper introduces a sensitive atherosclerosis biomarker based on the weighted mean VWT-Change measurement from 3D ultrasound with a purpose to detect statistically significant effect of B-Vitamin therapy. METHODS: Of the 56 subjects analyzed in this study, 27 were randomized to receive a B-Vitamin tablet daily and 29 received a placebo tablet daily. Participants were scanned at baseline and 1.9 ± 0.8 yr later. The 3D VWT map at each scanning session was computed by matching the outer wall and lumen surfaces on a point-by-point basis. The 3D annual VWT-Change maps were obtained by first registering the 3D VWT maps obtained at the baseline and follow-up scanning sessions, and then taking the point-wise difference in VWT and dividing the result by the years elapsed from the baseline to the follow-up scanning session. The 3D VWT-Change maps constructed for all patients were mapped to a 2D carotid template to adjust for the anatomic variability of the arteries. A weight at each point of the carotid template was assigned based on the degree of correlation between the VWT-Change measurements exhibited at that point and the treatment received (i.e., B-Vitamin or placebo) quantified by mutual information. The weighted mean of VWT-Change for each patient, denoted by ΔVWT¯Weighted, was computed according to this weight. T-tests were performed to compare the sensitivity of ΔVWT¯Weighted with existing biomarkers in detecting treatment effects. These biomarkers included changes in intima-media thickness (IMT), total plaque area (TPA), vessel wall volume (VWV), unweighted average of VWT-Change (ΔVWT¯) and a previously described biomarker, denoted by ΔVWT¯S, that quantifies the mean VWT-Change specific to regions of interest identified by a feature selection algorithm. RESULTS: Among the six biomarkers evaluated, the effect of B Vitamins was detected only by ΔVWT¯Weighted in this cohort (P=4.4×10-3). The sample sizes per treatment group required to detect an effect as large as exhibited in this study were 139, 178, 41 for ΔVWV, ΔVWT¯ and ΔVWT¯Weighted respectively. CONCLUSION: The proposed weighted mean of VWT-Change is more sensitive than existing biomarkers in detecting treatment effects. This measurement tool will allow for many proof-of-principal studies to be performed for various novel treatments before a more costly study involving a larger population is held to validate the results.

Concise biomarker for spatial-temporal change in three-dimensional ultrasound measurement of carotid vessel wall and plaque thickness based on a graph-based random walk framework: Towards sensitive evaluation of response to therapy.

Rapid progression in total plaque area and volume measured from ultrasound images has been shown to be associated with an elevated risk of cardiovascular events. Since atherosclerosis is focal and predominantly occurring at the bifurcation, biomarkers that are able to quantify the spatial distribution of vessel-wall-plus-plaque thickness (VWT) change may allow for more sensitive detection of treatment effect. The goal of this paper is to develop simple and sensitive biomarkers to quantify the responsiveness to therapies based on the spatial distribution of VWT-Change on the entire 2D carotid standardized map previously described. Point-wise VWT-Changes computed for each patient were reordered lexicographically to a high-dimensional data node in a graph. A graph-based random walk framework was applied with the novel Weighted Cosine (WCos) similarity function introduced, which was tailored for quantification of responsiveness to therapy. The converging probability of each data node to the VWT regression template in the random walk process served as a scalar descriptor for VWT responsiveness to treatment. The WCos-based biomarker was 14 times more sensitive than the mean VWT-Change in discriminating responsive and unresponsive subjects based on the p-values obtained in T-tests. The proposed framework was extended to quantify where VWT-Change occurred by including multiple VWT-Change distribution templates representing focal changes at different regions. Experimental results show that the framework was effective in classifying carotid arteries with focal VWT-Change at different locations and may facilitate future investigations to correlate risk of cardiovascular events with the location where focal VWT-Change occurs.

Three-dimensional ultrasound measurements of carotid vessel wall and plaque thickness and their relationship with pulmonary abnormalities in ex-smokers without airflow limitation.

The relationship between carotid disease and modestly abnormal airflow in ex-smokers without chronic obstructive pulmonary disease (COPD) is not well-understood. We generated 3D ultrasound measurements of carotid vessel-wall-plus-plaque thickness (VWT) and vessel wall volume (VWV) to quantify and evaluate such carotid ultrasound measurements in ex- and never-smokers without airflow limitation. These patients did not fulfill the diagnostic criteria for COPD. We also investigated the relationship of carotid atherosclerosis with pulmonary phenotypes of COPD. We evaluated 61 subjects without a clinical diagnosis of pulmonary or vascular diseases including 34 never-smokers (72 ± 6 year) and 27 ex-smokers (73 ± 9 year). We measured mean VWT ([Formula: see text]) and mean VWT specific to carotid regions-of-interest ([Formula: see text]) and evaluated potential differences between ex- and never-smokers. Carotid ultrasound and pulmonary disease measurement relationships were also evaluated using correlation coefficients (r) and multivariate regression analyses. Ex-smokers had a significantly greater [Formula: see text] (p = 0.003) and [Formula: see text] (p < 0.00001) than never-smokers, whereas a significant difference between the two groups was not detected by VWV (p = 1.0). There were significant correlations between the ventilation defect percent (VDP) measured by MRI with [Formula: see text] (r = 0.42, p = 0.001) and [Formula: see text] (r = 0.56, p = 0.00001). Multivariate regression models showed that VDP significantly predicted [Formula: see text] (ß = 0.38, p = 0.004) and [Formula: see text] (ß = 0.50, p = 0.00001). VWT-based measurements detected differences in vessel-wall-plus-plaque burden in ex- and never-smokers, which were not revealed using VWV. There were significant correlations between cardiovascular and pulmonary disease biomarkers in these ex-smokers who did not have a clinical diagnosis of pulmonary or carotid disease.

Fully automatic plaque segmentation in 3-D carotid ultrasound images.

Automatic segmentation of the carotid plaques from ultrasound images has been shown to be an important task for monitoring progression and regression of carotid atherosclerosis. Considering the complex structure and heterogeneity of plaques, a fully automatic segmentation method based on media-adventitia and lumen-intima boundary priors is proposed. This method combines image intensity with structure information in both initialization and a level-set evolution process. Algorithm accuracy was examined on the common carotid artery part of 26 3-D carotid ultrasound images (34 plaques ranging in volume from 2.5 to 456 mm(3)) by comparing the results of our algorithm with manual segmentations of two experts. Evaluation results indicated that the algorithm yielded total plaque volume (TPV) differences of -5.3 ± 12.7 and -8.5 ± 13.8 mm(3) and absolute TPV differences of 9.9 ± 9.5 and 11.8 ± 11.1 mm(3). Moreover, high correlation coefficients in generating TPV (0.993 and 0.992) between algorithm results and both sets of manual results were obtained. The automatic method provides a reliable way to segment carotid plaque in 3-D ultrasound images and can be used in clinical practice to estimate plaque measurements for management of carotid atherosclerosis.