A Cocatalytic Effect between Meldrum's Acid and Benzoxazine Compounds in Preparation of High Performance Thermosetting Resins.

In this work, a cocatalytic effect between Meldrum's acid (MA) and benzoxazine (Bz) compounds has been explored to build up a self-promoting curing system. Consequently, the MA/Bz reactive blend exhibits a relatively low reaction temperature compared to the required temperatures for the cross-linking reactions of the pure MA and Bz components. This feature is attractive for energy-saving processing issues. Moreover, the thermosetting resins based on the MA/Bz reactive blends have been prepared. The MA component can generate additional free volume in the resulting resins, so as to trap air in the resin matrix and consequently to bring low dielectric constants to the resins. The MA-containing agent is an effective modifier for benzoxazine resins to reduce their dielectric constants.

Quartz Crystal Microbalance Analysis of Diels-Alder Reactions of Alkene Gases to Functional Ionic Liquids on Chips.

We demonstrated here a successful development of the use of functional ionic liquids FIL 1 and FIL 3 for chemoselective detection of alkene gases measured by quartz crystal microbalance. This detection of gaseous alkenes was achieved by the Diels-Alder [4 + 2] cycloadditions with FIL 1 and FIL 3 thin-coated on quartz chips. Our functional ionic liquids could be prepared by straightforward synthetic chemistry in short steps and are superior in alkene gas detection. The QCM platform developed in this work is chemoselective with fast gas diffusion into ionic liquids, readily applicable to low molecular weight alkene gases and insensitive to moisture. To the best of our knowledge, this is the first report based upon the Diels-Alder reactions demonstrating sensitive alkene gas detection in ionic liquids on a QCM. This work is a proof-of-concept inspection of the promising use of a QCM-based sensor method for reaction-directed detection of gas samples, which is part of an ongoing program aimed at studying diseases.

Multiple release kinetics of targeted drug from gold nanorod embedded polyelectrolyte conjugates induced by near-infrared laser irradiation.

The conjugates of gold nanorods and the model drug, fluorescein isothiocyanate (FITC), embedded inside polyelectrolytes (GNRs/FITC@PLE) were synthesized to study the release kinetics of FITC under femtosecond near-infrared (NIR) laser irradiation. The optical and structural properties of GNRs/FITC@PLE conjugates before and after laser treatments were examined using UV-vis spectroscopy, confocal microscopy, and transmission electron microscopy (TEM). The release of FITC from the conjugates was induced by the heat generated from gold nanorods under laser irradiation. The concentration of released FITC was measured as the time of continuous and periodic laser irradiation was varied. Within 5 min of the laser exposure, the release rates of FITC exhibited zero-order and first-order kinetics under continuous and periodic irradiation, respectively. Furthermore, a drug release system was designed based on the conjugates of gold nanorods and the anticancer drug, paclitaxel (PTX), embedded inside polyelectrolytes (GNRs/PTX@PLE). The conjugates were applied for in vitro studies with breast cancer cells. The release of PTX from the conjugates was triggered by NIR laser irradiation, and the inhibition rates of the cells showed strong dependencies on the irradiation modes and time. The results suggested that the multiple releases of PTX from the conjugates can be controlled by laser irradiation within a long period of time. Our system holds great potential for future therapeutic applications on breast cancers.

Three-dimensional nucleus-to-cytoplasm ratios provide better discrimination of normal and lung adenocarcinoma cells than in two dimensions.

We acquired multiphoton images of normal and lung adenocarcinoma cell lines in three dimensions. Image stacks of the cells were then processed to obtain nucleus-to-cytoplasm (N/C) ratios in two and three dimensions. While N/C ratios in three dimensions can be unambiguously determined from the volumetric ratios of the nucleus and cytoplasm, two-dimensional (2-D) N/C can vary depending on the axial plane selected for N/C ratio determination. We determined 2-D N/C ratios from three criteria: (1) axial position at which the nuclear area is the largest; (2) the largest 2-D N/C ratio value; and (3) axial position at the midpoint of nuclear axial position. We found that different definitions of 2-D N/C ratio will significantly affect its value. Furthermore, in general, larger variance was found in 2-D rather than three-dimensional (3-D) N/C ratios. Lack of ambiguity in definition and reduced variance suggest that 3-D N/C ratio is a better parameter for characterizing tumor cells in the clinical setting.

Dynamic visualization of the recovery of mouse hepatobiliary metabolism to acetaminophen-overdose damage.

Acetaminophen (APAP) overdose is one of the world's leading causes of drug-induced hepatotoxicity. Although traditional methods such as histological imaging and biochemical assays have been successfully applied to evaluate the extent of APAP-induced liver damage, detailed effect of how APAP overdose affect the recovery of hepatobiliary metabolism and is not completely understood. In this work, we used intravital multiphoton microscopy to image and quantify hepatobiliary metabolism of the probe 6-carboxyfluorescein diacetate in APAP-overdose mice. We analyzed hepatobiliary metabolism for up to 7 days following the overdose and found that the excretion of the probe molecule was the most rapid on Day 1 following APAP overdose and slowed down on Days 2 and 3. On Day 7, probe excretion capability has exceeded that of the normal mice, suggesting that newly regenerated hepatocytes have higher metabolic capabilities. Our approach may be further developed applied to studying drug-induced hepatotoxicity in vivo.

Direct visualization of functional heterogeneity in hepatobiliary metabolism using 6-CFDA as model compound.

Hepatobiliary metabolism is one of the major functions of the liver. However, little is known of the relationship between the physiological location of the hepatocytes and their metabolic potential. By the combination of time-lapse multiphoton microscopy and first order kinetic constant image analysis, the hepatocellular metabolic rate of the model compound 6-carboxyfluorescein diacetate (6-CFDA) is quantified at the single cell level. We found that the mouse liver can be divided into three zones, each with distinct metabolic rate constants. The sinusoidal uptake coefficients k1 of Zones 1, 2, and 3 are respectively 0.239 ± 0.077, 0.295 ± 0.087, and 0.338 ± 0.133 min-1, the apical excreting coefficients k2 of Zones 1, 2, and 3 are 0.0117 ± 0.0052, 0.0175 ± 0.0052, and 0.0332 ± 0.0195 min-1, respectively. Our results show not only the existence of heterogeneities in hepatobiliary metabolism, but they also show that Zone 3 is the main area of metabolism.

In vitro differential diagnosis of clavus and verruca by a predictive model generated from electrical impedance.

BACKGROUND: Similar clinical appearances prevent accurate diagnosis of two common skin diseases, clavus and verruca. In this study, electrical impedance is employed as a novel tool to generate a predictive model for differentiating these two diseases. MATERIALS AND METHODS: We used 29 clavus and 28 verruca lesions. To obtain impedance parameters, a LCR-meter system was applied to measure capacitance (C), resistance (Re), impedance magnitude (Z), and phase angle (θ). These values were combined with lesion thickness (d) to characterize the tissue specimens. The results from clavus and verruca were then fitted to a univariate logistic regression model with the generalized estimating equations (GEE) method. In model generation, log ZSD and θSD were formulated as predictors by fitting a multiple logistic regression model with the same GEE method. The potential nonlinear effects of covariates were detected by fitting generalized additive models (GAM). Moreover, the model was validated by the goodness-of-fit (GOF) assessments. RESULTS: Significant mean differences of the index d, Re, Z, and θ are found between clavus and verruca (p<0.001). A final predictive model is established with Z and θ indices. The model fits the observed data quite well. In GOF evaluation, the area under the receiver operating characteristics (ROC) curve is 0.875 (>0.7), the adjusted generalized R2 is 0.512 (>0.3), and the p value of the Hosmer-Lemeshow GOF test is 0.350 (>0.05). CONCLUSIONS: This technique promises to provide an approved model for differential diagnosis of clavus and verruca. It could provide a rapid, relatively low-cost, safe and non-invasive screening tool in clinic use.

Engineering enzymes for improved catalytic efficiency: a computational study of site mutagenesis in epothilone-B hydroxylase.

Epothilone F, 21-hydroxyl-epothilone B, is an intermediate in the synthesis of BMS-310705, an antitumor compound that has been evaluated in Phase I clinical trials. A bioconversion process utilizing the Gram-positive bacterium Amycolatopsis orientalis was used to prepare epothilone F from epothilone B. In order to improve the yield of epothilone F, a mutagenesis program was performed with the goal of engineering the epothilone-B hydroxylase (EBH) enzyme to improve the yield of epothilone F through oxidative biotransformation. The mutations in EBH increased the yield of epothilone F from 21% in the recombinant expression system to higher than 80% utilizing the best EBH mutants. The studies described here show how a homology model of EBH was used to obtain an understanding of the possible mechanism that led to improved yield of epothilone F in the mutated enzymes. A novel aspect of this study is that it provides some insight into how mutations distant from the binding site can affect enzyme activity.

Chemical enhancer induced changes in the mechanisms of transdermal delivery of zinc oxide nanoparticles.

The overlapping wavelength of photoluminescence (PL) of zinc oxide nanoparticles (ZnO NPs) and autofluorescence (AF) from the stratum corneum (SC) has for a long time held back researchers from investigating the chemically enhanced penetration pathways of ZnO NPs into the SC lipids. However, the non-linear polarization effect of second harmonic generation (SHG) may be used for ZnO NPs to be distinguished from the AF of the SC. This study combined the SHG of ZnO NPs and the AF of the SC to image the transdermal delivery of ZnO NPs under the chemical enhancer conditions of oleic acid (OA), ethanol (EtOH) and oleic acid-ethanol (OA-EtOH). In addition to qualitative imaging, the microtransport properties of ZnO NPs were quantified to give the enhancements of the vehicle-to-skin partition coefficient (K), the SHG intensity gradient (G) and the effective diffusion path length (L). The results showed that OA, EtOH and OA-EtOH were all capable of enhancing the transdermal delivery of ZnO NPs by increasing the intercellular lipid fluidity or extracting lipids from the SC.

Cloning and expression of a cytochrome P450 hydroxylase gene from Amycolatopsis orientalis: hydroxylation of epothilone B for the production of epothilone F.

Degenerate PCR primers were used to amplify cytochrome P450 gene fragments from the high-GC gram-negative bacteria Amycolatopsis orientalis, which catalyzes the hydroxylation of epothilone B to produce epothilone F. The amplified fragments were used as hybridization probes to identify and clone two intact cytochrome P450 genes. The expression of one of the cloned genes in a Streptomyces lividans transformant resulted in the biotransformation of epothilone B to epothilone F. The conversion of epothilone B to epothilone F by the S. lividans transformant was confirmed by mass spectrometry and nuclear magnetic resonance spectroscopy.

Purification, cloning, and functional expression of phenylalanine aminomutase: the first committed step in Taxol side-chain biosynthesis.

The conversion of alpha-phenylalanine to beta-phenylalanine is the first committed step in the biosynthesis of the C-13 side chain of Taxol. Thus, the novel enzyme responsible for this step, phenylalanine aminomutase (PAM), is of considerable interest for studies of Taxol biosynthesis and represents a potential target for genetic engineering. A method is described for purifying PAM from Taxus chinensis cell cultures. The purified enzyme has a K(m) of 1.1mM, a V(max) of 110.1 microm/min/mg protein, a pH optimum of 7.5-8.0, and a denatured molecular weight of about 80 kDa. Peptide sequences derived from the purified protein were used to design and synthesize degenerate primers enabling the PCR synthesis of the PAM cDNA. The PAM cDNA encodes a protein of 687 amino acid residues with a deduced molecular weight of 75.3 kDa. The PAM cDNA was cloned and expressed in Escherichia coli, and PAM activity was demonstrated. As a gene symbol for the PAM enzyme, pam is proposed. Protein sequence alignments of PAM, phenylalanine ammonia-lyase (PAL), and histidine ammonia-lyase (HAL) sequences exhibit significant similarity providing insight into potential active site residues of PAM.

Strain improvement for fermentation and biocatalysis processes by genetic engineering technology.

Twenty years ago, the first complete gene cluster encoding the actinorhodin biosynthetic pathway was cloned and characterized. Subsequently, the gene clusters encoding the biosynthetic pathways for many antibiotics were isolated. In the past decade, breakthroughs in technology brought that generation of rationally designed or new hybrid metabolites to fruition. Now, the development of high-throughput DNA sequencing and DNA microarray techniques enables researchers to identify the regulatory mechanisms for the overproduction of secondary metabolites and to monitor gene expression during the fermentation cycle, accelerating the rational application of metabolic pathway engineering. How are the new tools of biotechnology currently being applied to improve the production of secondary metabolites? Where will this progress lead us tomorrow? The use of whole cells or partially purified enzymes as catalysts has been increased significantly for chemical synthesis in pharmaceutical and fine-chemical industries. The development of PCR technologies for protein engineering and DNA shuffling is leading to the generation of new enzymes with increased stability to a wide range of pHs, temperatures and solvents and with increased substrate specificity, reaction rate and enantioselectivity. Where will this emerging technology lead us in the twenty-first century?