Predicting Concentration- and Ionic-Strength-Dependent Air-Water Interfacial Partitioning Parameters of PFASs Using Quantitative Structure-Property Relationships (QSPRs).

Air-water interfacial retention of poly- and perfluoroalkyl substances (PFASs) is increasingly recognized as an important environmental process. Herein, column transport experiments were used to measure air-water interfacial partitioning values for several perfluoroalkyl ethers and for PFASs derived from aqueous film-forming foam, while batch experiments were used to determine equilibrium Kia data for compounds exhibiting evidence of rate-limited partitioning. Experimental results suggest a Freundlich isotherm best describes PFAS air-water partitioning at environmentally relevant concentrations (101-106 ng/L). A multiparameter regression analysis for Kia prediction was performed for the 15 PFASs for which equilibrium Kia values were determined, assessing 246 possible combinations of 8 physicochemical and system properties. Quantitative structure-property relationships (QSPRs) based on three to four parameters provided predictions of high accuracy without model overparameterization. Two QSPRs (R2 values of 0.92 and 0.83) were developed using an assumed average Freundlich n value of 0.65 and validated across a range of relevant concentrations for perfluorooctane sulfonate (PFOS), perfluorooctanoate (PFOA), and hexafluoropropylene oxide-dimer acid (i.e., GenX). A mass action model was further modified to account for the changing ionic strength on PFAS air-water interfacial sorption. The final result was two distinct QSPRs for estimating PFAS air-water interfacial partitioning across a range of aqueous concentrations and ionic strengths.

Electric Field-Assisted Nanofiltration for PFOA Removal with Exceptional Flux, Selectivity, and Destruction.

Per- and polyfluoroalkyl substances (PFAS) pose significant environmental and human health risks and thus require solutions for their removal and destruction. However, PFAS cannot be destroyed by widely used removal processes like nanofiltration (NF). A few scarcely implemented advanced oxidation processes can degrade PFAS. In this study, we apply an electric field to a membrane system by placing a nanofiltration membrane between reactive electrodes in a crossflow configuration. The performance of perfluorooctanoic acid (PFOA) rejection, water flux, and energy consumption were evaluated. The reactive and robust SnO2-Sb porous anode was created via a sintering and sol-gel process. The characterization and analysis techniques included field emission scanning electron microscopy (FE-SEM), X-ray photoelectron spectroscopy (XPS), X-ray diffraction (XRD), ion chromatography, mass spectroscopy, porosimeter, and pH meter. The PFOA rejection increased from 45% (0 V) to 97% (30 V) when the electric field and filtration were in the same direction, while rejection capabilities worsened in opposite directions. With saline solutions (1 mM Na2SO4) present, the induced electro-oxidation process could effectively mineralize PFOA, although this led to unstable removal and water fluxes. The design achieved an exceptional performance in the nonsaline feed of 97% PFOA rejection and water flux of 68.4 L/m2 hr while requiring only 7.31 × 10-5 kWh/m3/order of electrical energy. The approach's success is attributed to the proximity of the electrodes and membrane, which causes a stronger electric field, weakened concentration polarization, and reduced mass transfer distances of PFOA near the membrane. The proposed electric field-assisted nanofiltration design provides a practical membrane separation method for PFAS removal from water.

Hydrothermal Alkaline Treatment (HALT) of Foam Fractionation Concentrate Derived from PFAS-Contaminated Groundwater.

While foam fractionation (FF) process has emerged as a promising technology for removal of per- and polyfluoroalkyl substances (PFASs) from contaminated groundwater, management of the resulting foam concentrates with elevated concentrations of PFASs (e.g., >1 g/L) remains a challenge. Here, we applied hydrothermal alkaline treatment (HALT) to two foam concentrates derived from FF field demonstration projects that treated aqueous film-forming foam (AFFF)-impacted groundwater. Results showed >90% degradation and defluorination within 90 min of treatment (350 °C, 1 M NaOH) of all 62 PFASs (including cations, anions, and zwitterions) identified in foam concentrates. Observed rate constants for degradation of individual perfluoroalkyl sulfonates (PFSAs, CnF2n+1-SO3-), the most recalcitrant class of PFASs, in both foam concentrates were similar to values measured previously in other aqueous matrices, indicating that elevated initial PFAS concentrations (e.g., PFHxSinit = 0.55 g/L), dissolved organic carbon (DOC; up to 4.5 g/L), and salt levels (e.g., up to 325 mg/L chloride) do not significantly affect PFAS reaction kinetics. DOC was partially mineralized by treatment, but a fraction (∼15%) was recalcitrant. Spectroscopic characterization revealed molecular features of the HALT-recalcitrant DOC fraction, and nontarget high-resolution mass spectrometry tentatively identified 129 nonfluorinated HALT-recalcitrant molecules. Analysis of process energy requirements shows that treating PFAS-contaminated foam concentrates with HALT would add minimally (<5%) to the overall energy requirements of an integrated FF-HALT treatment train.

Chronic Exposure to a PFAS Mixture Resembling AFFF-Impacted Surface Water Decreases Body Size in Northern Leopard Frogs (Rana pipiens).

Per- and polyfluoroalkyl substances (PFAS) occur in the environment as mixtures, yet mixture toxicity remains poorly understood. Aqueous film-forming foams (AFFFs) are a common source of PFAS. Our objective was to examine chronic effects of a complex PFAS mixture on amphibian growth and development. We tested toxicity of a five-chemical PFAS mixture summing to 10 µg/L and that accounts for >90% of the PFAS in AFFF-affected surface waters: perfluorooctane sulfonate (PFOS, 40%), perfluorohexane sulfonic acid (PFHxS, 30%), perflurooctanoic acid (PFOA, 12.5%), perfluorohexanoic acid (PFHxA, 12.5%), and perfluoropentanoic acid (PFPeA, 5%). We also included treatments to determine whether PFOS drove mixture toxicity and whether PFOS and mixture components act additively. We exposed Northern leopard frog (Rana pipiens) larvae through metamorphosis (∼130 d) in outdoor mesocosms. After 21 days of exposure, the larval body condition fell ∼5% relative to controls in the 4 µg/L PFOS treatment and mixtures lacking PFOS. At metamorphosis, the full 5-component 10 µg/L PFAS mixture reduced mass by 16% relative to controls. We did not observe effects on development. Our results indicate that toxicity of PFOS and other PFAS mixtures typical of AFFF sites act additively and that PFOS is not more inherently toxic than other mixture components.

Toxicities of Legacy and Current-Use PFAS in an Anuran: Do Larval Exposures Influence Responses to a Terrestrial Pathogen Challenge?

Legacy polyfluoroalkyl substances (PFAS) [perfluorooctanesulfonate (PFOS) and perfluorooctanoic acid (PFOA)] are being replaced by various other fluorinated compounds, such as hexafluoropropylene oxide dimer acid (GenX). These alternatives are thought to be less bioaccumulative and, therefore, less toxic than legacy PFAS. Contaminant exposures occur concurrently with exposure to natural stressors, including the fungal pathogen Batrachocytrium dendrobatidis (Bd). Despite evidence that other pollutants can increase the adverse effects of Bd on anurans, no studies have examined the interactive effects of Bd and PFAS. This study tested the growth and developmental effects of PFOS, PFOA, and GenX on gray treefrog (Hyla versicolor) tadpoles, followed by a Bd challenge after metamorphosis. Despite PFAS exposure only occurring during the larval stage, carry-over effects on growth were observed post metamorphosis. Further, PFAS interacted with Bd exposure to influence growth; Bd-exposed animals had significantly shorter SVL [snout-vent length (mm)] with significantly increased body condition, among other time-dependent effects. Our data suggest that larval exposure to PFAS can continue to impact growth in the juvenile stage after exposure has ended. Contrary to predictions, GenX affected terrestrial performance more consistently than its legacy congener, PFOA. Given the role of Bd in amphibian declines, further investigation of interactions of PFAS with Bd and other environmentally relevant pathogens is warranted.

Application of Hydrothermal Alkaline Treatment for Destruction of Per- and Polyfluoroalkyl Substances in Contaminated Groundwater and Soil.

Hydrothermal alkaline treatment (HALT) can effectively degrade per- and polyfluoroalkyl substances (PFASs) present in aqueous film-forming foam (AFFF). However, information is lacking regarding the treatment of PFASs in actual groundwater and soil from AFFF-impacted sites, especially for complex soil matrices. Given the lack of studies on direct soil treatment for PFAS destruction, we herein applied HALT to two groundwater samples and three soil samples from AFFF-impacted sites and characterized the destruction of PFASs using high-resolution mass spectrometry. Results showed that the 148 PFASs identified in all collected field samples, including 10 cationic, 98 anionic, and 40 zwitterionic PFASs, were mostly degraded to nondetectable levels within 90 min when treated with 5 M NaOH at 350 °C. The near-complete defluorination, as evidenced by fluoride release measurements, confirmed the complete destruction of PFASs. While many structures, including perfluoroalkyl carboxylic acids and polyfluorinated substances, were readily degraded, perfluoroalkyl sulfonates (PFSAs, CnF2n+1-SO3-), most notably with short chain lengths (n = 3-5), were more recalcitrant. Rates of PFSA destruction in groundwater samples were similar to those measured in laboratory water solutions, but reactions in soil were slow, presumably due to base-neutralizing properties of the soil. Further, the degradation of PFASs in groundwaters and soils was found to be a function of reaction temperature, NaOH concentration, and reaction time. These findings have important implications for the remediation of AFFF-impacted sites.

Estimation of Transport Parameters of Perfluoroalkyl Acids (PFAAs) in Unsaturated Porous Media: Critical Experimental and Modeling Improvements.

Predicting the transport of perfluoroalkyl acids (PFAAs) in the vadose zone is critically important for PFAA site cleanup and risk mitigation. PFAAs exhibit several unusual and poorly understood transport behaviors, including partitioning to the air-water interface, which is currently the subject of debate. This study develops a novel use of quasi-saturated (residual air saturation) column experiments to estimate chemical partitioning parameters of both linear and branched perfluorooctane sulfonate (PFOS) in unsaturated soils. The ratio of linear-to-branched air-water interfacial partitioning constants for all six experiments was 1.62 ± 0.24, indicating significantly greater partitioning of linear PFOS isomers at the air-water interface. Standard breakthrough curve analysis and numerical inversion of HYDRUS models support the application of a Freundlich isotherm for PFOS air-water interfacial partitioning below a critical reference concentration (CRC). Data from this study and previously reported unsaturated column data on perfluorooctanoate (PFOA) were reevaluated to examine unsaturated systems for transport nonidealities. This reanalysis suggests both transport nonidealities and Freundlich isotherm behavior for PFOA below the CRC using drainage-based column methods, contrary to the assertions of the original authors. Finally, a combined Freundlich-Langmuir isotherm was proposed to describe PFAA air-water interfacial partitioning across the full range of relevant PFAA concentrations.

Effects of Per- and Polyfluoroalkyl Substance Mixtures on the Susceptibility of Larval American Bullfrogs to Parasites.

Per- and polyfluoroalkyl substances (PFAS) are persistent environmental contaminants known to adversely affect health and development in many taxa. Although PFAS generally occur as mixtures in the environment, little is known about the effects of PFAS mixtures on organisms compared to single chemical exposures. Moreover, PFAS exposure in nature occurs alongside biotic factors such as parasitism. Even though host-parasite interactions are common in natural systems, there is little information about how PFAS affect these interactions. Here, we examined the effects of PFAS mixtures on the susceptibility of larval American bullfrogs (Rana catesbeiana) to echinostomes. Our PFAS treatments included perfluorooctanesulfonic acid (PFOS) at 4 and 10 ppb, two mixtures without PFOS as a component at 6 and 10 ppb total PFAS, and a mixture containing PFOS at 10 ppb total PFAS. We found that a 62-day PFAS exposure increased parasite loads by 42-100% in all treatments relative to the control. Additionally, we found that the singular exposure to PFOS increased parasite loads by ∼40% compared to a mixture containing PFOS suggesting antagonism among PFAS in mixtures. Our results highlight the need for further investigation into the effects of PFAS mixtures on organisms and how PFAS affect common ecological interactions.

Biological and Chemical Transformation of the Six-Carbon Polyfluoroalkyl Substance N-Dimethyl Ammonio Propyl Perfluorohexane Sulfonamide (AmPr-FHxSA).

Sites impacted by aqueous film-forming foam (AFFF) contain co-contaminants that can stimulate biotransformation of polyfluoroalkyl substances. Here, we compare how microbial enrichments from AFFF-impacted soil amended with diethyl glycol monobutyl ether (found in AFFF), aromatic hydrocarbons (present in co-released fuels), acetate, and methane (substrates used or formed during bioremediation) impact the aerobic biotransformation of an AFFF-derived six-carbon electrochemical fluorination (ECF) precursor N-dimethyl ammonio propyl perfluorohexane sulfonamide (AmPr-FHxSA). We found that methane- and acetate-oxidizing cultures resulted in the highest yields of identifiable products (38 and 30%, respectively), including perfluorohexane sulfonamide (FHxSA) and perfluorohexane sulfonic acid (PFHxS). Using these data, we propose and detail a transformation pathway. Additionally, we examined chemical oxidation products of AmPr-FHxSA and FHxSA to provide insights on remediation strategies for AmPr-FHxSA. We demonstrate mineralization of these compounds using the sulfate radical and test their transformation during the total oxidizable precursor (TOP) assay. While perfluorohexanoic acid accounted for over 95% of the products formed, we demonstrate here for the first time two ECF-based precursors, AmPr-FHxSA and FHxSA, that produce PFHxS during the TOP assay. These findings have implications for monitoring poly- and perfluoroalkyl substances during site remediation and application of the TOP assay at sites impacted by ECF-based precursors.

Hydrothermal Alkaline Treatment for Destruction of Per- and Polyfluoroalkyl Substances in Aqueous Film-Forming Foam.

The widespread use of aqueous film-forming foam (AFFF) for firefighting activities (e.g., fire training to extinguish fuel-based fires at aircraft facilities) has led to extensive groundwater and soil contamination by per- and polyfluoroalkyl substances (PFASs) that are highly recalcitrant to destruction using conventional treatment technologies. This study reports on the hydrothermal alkaline treatment of diverse PFASs present in AFFFs. Quantitative and semiquantitative high-resolution mass spectrometry analyses of PFASs demonstrate a rapid degradation of all 109 PFASs identified in two AFFFs (sulfonate- and fluorotelomer-based formulations) in water amended with an alkali (e.g., 1-5 M NaOH) at near-critical temperature and pressure (350 °C, 16.5 MPa). This includes per- and polyfluoroalkyl acids and a range of acid precursors. Most PFASs were degraded to nondetectable levels within 15 min, and the most recalcitrant perfluoroalkyl sulfonates were degraded within 30 min when treated with 5 M NaOH. 19F NMR spectroscopic analysis and fluoride ion analysis confirm the near-complete defluorination of PFASs in both dilute and concentrated AFFF mixtures, and no stable volatile organofluorine species were detected in reactor headspace gases by the gas chromatography-mass spectrometry analysis. These findings indicate a significant potential for application of hydrothermal treatment technologies to manage PFAS waste streams, including on-site treatment of unused AFFF chemical stockpiles, investigation-derived wastes, and concentrated source zone materials.

Removal of Per- and Polyfluoroalkyl Substances (PFASs) in Aqueous Film-Forming Foam (AFFF) Using Ion-Exchange and Nonionic Resins.

Despite benefits to the firefighting industry, the release of per- and polyfluoroalkyl substances (PFASs) from aqueous film-forming foam (AFFF) into aquatic systems poses significant risks to human health and other organisms. While anion-exchange technologies have proven to be effective for removing perfluoroalkyl acids (PFAAs) from water, their effectiveness for removing the diverse PFAS structures discovered in AFFF remains unknown. Here, we report on the adsorption of 75 PFASs, including 63 polyfluorinated substances, in a diluted AFFF mixture using 14 commercially available ion-exchange (IX)/nonionic resins and granular activated carbon (GAC). Results showed that anion-exchange resins (AERs) exhibited significant adsorption of PFASs compared to cation-exchange resins (CERs), nonionic resins (NIRs), and GAC regardless of the PFAS's predicted charge. Isotherm data showed that macroporous AERs have a higher PFAS adsorption capacity compared to gel-type AERs. Cross-correlation comparison of PFAS/Cl- selectivity coefficients (Kex) for each PFAS-AER combination showed that the hydrophobicity of the AER functional group, and polymer matrix played a dominant role in determining resin affinity for PFASs. PFAS structural characteristics also significantly affected adsorption, with increasing chain length and a net negative charge increasing the extent of adsorption. Results from this study provide guidelines for the selection of resins to adsorb a wider range of PFASs and meaningful insights for the development of quantitative models for IX treatment of AFFF-impacted water.

Characterizing and Comparing Per- and Polyfluoroalkyl Substances in Commercially Available Biosolid and Organic Non-Biosolid-Based Products.

There is increasing concern over the presence of per- and polyfluoroalkyl substances (PFAS) in biosolids, while sales in commercially available biosolid-based products used as soil amendments are also increasing. Here, the occurrence of 17 perfluoroalkyl acids (PFAAs) present in 13 commercially available biosolid-based products, six organic composts (manure, mushroom, peat, and untreated wood), and one food and yard waste compost were studied. The PFAA concentration ranges observed are as follows: biosolid-based products (9.0-199 µg/kg) > food and yard waste (18.5 µg/kg) > other organic products (0.1-1.1 µg/kg). Analysis of 2014, 2016, and 2018 bags produced from one product line showed a temporal decrease in the total PFAAs (181, 101, and 74 µg/kg, respectively). The total oxidizable precursor (TOP) assay revealed the presence of PFAA precursors in the biosolid-based products at much higher levels, when the soluble carbon was removed by the ENVI-Carb clean-up prior to the TOP assay. Time-of-flight mass spectrometry confirmed the presence of three sulfonamides, two fluorotelomer sulfonates, and several polyfluoroalkyl phosphate diesters. Pore-water concentrations of water-saturated products were primarily of short-chain PFAAs and increased with increasing PFAA concentrations in the products. A strong positive log-linear correlation between organic carbon (OC)-normalized PFAA partition coefficients and the number of CFn units indicates that OC is a good predictor of PFAA release concentrations.

Larval amphibians rapidly bioaccumulate poly- and perfluoroalkyl substances.

Poly- and perfluoroalkyl substances (PFAS) are ubiquitous contaminants that can bioaccumulate in aquatic taxa. Amphibians are particularly vulnerable to contaminants and sensitive to endocrine disruptors during their aquatic larval stage. However, few studies have explored PFAS uptake rates in amphibians, which is critical for designing ecotoxicology studies and assessing the potential for bioaccumulation. Uptake rates of perfluorooctane sulfonate (PFOS) and perfluorooctanoic acid (PFOA) were measured for larval northern leopard frogs (Rana pipiens), American toads (Anaxyrus americanus), and eastern tiger salamanders (Ambystoma tigrinum) during a 240-h exposure to 10 and 1000 µg/L concentrations. We measured body burden and calculated bioconcentration factor (BCF) every 48 h during the experiments. For all species and exposures, body burdens often reached steady state within 48-96 h of exposure. Steady-state body burdens for PFOA and PFOS ranged from 3819 to 16,481 ng/g dry weight (BCF = 0.46-2.5) and 6955-489,958 ng/g dry weight (47-259 BCFs), respectively. Therefore, PFAS steady state occurs rapidly in the larval amphibians we studied and particularly for PFOS. This result reflects a high potential for PFAS trophic transfer because amphibians are often low in trophic position and are important prey for many aquatic and terrestrial species.

Sorption, Aerobic Biodegradation, and Oxidation Potential of PFOS Alternatives Chlorinated Polyfluoroalkyl Ether Sulfonic Acids.

Global phase out of perfluorooctanesulfonic acid (PFOS) has led to increasing production of alternatives such as the chlorinated polyfluoroalkyl ether sulfonic acids (Cl-PFESAs) for which little is known on their environmental fate. In this study, sorption by soils, aerobic soil biodegradation, and oxidation potential of 6:2 Cl-PFESA (9-chlorohexadecafluoro-3-oxanonane-1-sulfonate) and 8:2 Cl-PFESA (9-chlorooctadecafluoro-3-oxanonane-1-sulfonate) were evaluated. 6:2 Cl-PFESA sorption was quantified for aqueous and acetone/water solutions, whereas 8:2 PFESA could only be accurately measured in acetone/water solutions. The log-linear cosolvency model was applied and validated to estimate sorption of 8:2 Cl-PFESA. Only soil organic carbon (OC, 0.76-4.30%) was highly and positively correlated to sorption of the Cl-PFESAs ( R2 > 0.96). The resulting log Koc values (OC-normalized sorption coefficients) are 4.01 ± 0.09 ( n = 6) and 5.54 ± 0.05 ( n = 4) L kg-1 for 6:2 Cl-PFESA and 8:2 Cl-PFESA, respectively. Aerobic biodegradation in a loam soil at 24 ± 0.5 °C showed negligible degradation of both Cl-PFESAs. Cl-PFESAs also remained unchanged in an unbuffered heat (50 °C)-activated 42 mM persulfate oxidation treatment. Therefore, Cl-PFESAs are equally recalcitrant as PFOS in addition to being more sorptive, thus with a higher bioaccumulation potential for a similar alkyl chain length.

Partitioning Behavior of Bisphenol Alternatives BPS and BPAF Compared to BPA.

With the pressure to ban or limit the use of bisphenol A (BPA), production of alternatives such as bisphenol AF (BPAF) and bisphenol S (BPS) are increasing, but little is known on their partitioning behavior for use in assessing distribution in the ecosystem. Octanol-water (DowpH) and soil-water partitioning were measured at several pH values for BPA, BPAF, and BPS. Sorption isotherms were constructed from measured aqueous and soil phase concentrations and were fit sufficiently well with a linear sorption model. pH-dependent distribution was observed in both octanol-water and soil-water systems particularly for BPS and BPAF, which have lower estimated pKa values than those for BPA. Accounting for soil organic carbon (OC) content and pH was sufficient to describe sorption reasonable well across the four soils (%OC 0.1-2.5, pH 3.8-8.6); no other soil properties correlated well with bisphenol sorption. However, for a given soil especially for the two high clay low OC soils, BPS sorbed much more than expected relative to observed trends in DowpH and magnitude appeared correlated to % kaolinite; therefore, Ca2+-bridging of BPS to clay edge sites was assessed by comparing sorption from 0.01 N KCl and 0.01 N CaCl2; however, no significant differences were observed.

Aerobic Soil Biodegradation of Bisphenol (BPA) Alternatives Bisphenol S and Bisphenol AF Compared to BPA.

Pressures to ban bisphenol A (BPA) has led to the use of alternate chemicals such as BPA analogues bisphenol S (BPS) and bisphenol AF (BPAF) in production of consumer products; however, information on their environmental fate is scarce. In this study, aerobic degradation of BPA, BPAF, and BPS at 100 µg/kg soil and 22 ± 2 °C was monitored for up to 180 days in a forest soil and an organic farm soil. At each sampling point, soils were extracted three times and analyzed by liquid chromatography high resolution mass or time-of-flight mass spectrometry. Based on compound mass recovered from soils compared to the mass applied, BPS had short half-lives of <1 day in both soils similar to BPA. BPAF was much more persistent with observed half-lives of 32.6 and 24.5 days in forest and farm soils, respectively. To our knowledge, this is the first report on BPAF degradation. For all three compounds, half-lives were longer in the higher organic carbon (OC) forest soil which correlates well to sorption studies showing higher sorption with higher OC. Metabolites identified for all three bisphenols support degradation pathways that include meta-cleavage as well as ortho-cleavage, which has not been previously shown.

The Drosophila Tis11 protein and its effects on mRNA expression in flies.

Members of the mammalian tristetraprolin family of CCCH tandem zinc finger proteins can bind to certain AU-rich elements (AREs) in mRNAs, leading to their deadenylation and destabilization. Mammals express three or four members of this family, but Drosophila melanogaster and other insects appear to contain a single gene, Tis11. We found that recombinant Drosophila Tis11 protein could bind to ARE-containing RNA oligonucleotides with low nanomolar affinity. Remarkably, co-expression in mammalian cells with "target" RNAs demonstrated that Tis11 could promote destabilization of ARE-containing mRNAs and that this was partially dependent on a conserved C-terminal sequence resembling the mammalian NOT1 binding domain. Drosophila Tis11 promoted both deadenylation and decay of a target transcript in this heterologous cell system. We used chromosome deletion/duplication and P element insertion to produce two types of Tis11 deficiency in adult flies, both of which were viable and fertile. To address the hypothesis that Tis11 deficiency would lead to the abnormal accumulation of potential target transcripts, we analyzed gene expression in adult flies by deep mRNA sequencing. We identified 69 transcripts from 56 genes that were significantly up-regulated more than 1.5-fold in both types of Tis11-deficient flies. Ten of the up-regulated transcripts encoded probable proteases, but many other functional classes of proteins were represented. Many of the up-regulated transcripts contained potential binding sites for tristetraprolin family member proteins that were conserved in other Drosophila species. Tis11 is thus an ARE-binding, mRNA-destabilizing protein that may play a role in post-transcriptional gene expression in Drosophila and other insects.

AF1q is a universal marker of neuroblastoma that sustains N-Myc expression and drives tumorigenesis.

Neuroblastoma is the most common extracranial malignant tumor of childhood, accounting for 15% of all pediatric cancer deaths. Despite significant advances in our understanding of neuroblastoma biology, five-year survival rates for high-risk disease remain less than 50%, highlighting the importance of identifying novel therapeutic targets to combat the disease. MYCN amplification is the most frequent and predictive molecular aberration correlating with poor outcome in neuroblastoma. N-Myc is a short-lived protein primarily due to its rapid proteasomal degradation, a potentially exploitable vulnerability in neuroblastoma. AF1q is an oncoprotein with established roles in leukemia and solid tumor progression. It is normally expressed in brain and sympathetic neurons and has been postulated to play a part in neural differentiation. However, no role for AF1q in tumors of neural origin has been reported. In this study, we found AF1q to be a universal marker of neuroblastoma tumors. Silencing AF1q in neuroblastoma cells caused proteasomal degradation of N-Myc through Ras/ERK and AKT/GSK3ß pathways, activated p53 and blocked cell cycle progression, culminating in cell death via the intrinsic apoptotic pathway. Moreover, silencing AF1q attenuated neuroblastoma tumorigenicity in vivo signifying AF1q's importance in neuroblastoma oncogenesis. Our findings reveal AF1q to be a novel regulator of N-Myc and potential therapeutic target in neuroblastoma.

PFAS release from wastewater residuals as a function of composition and production practices.

Per- and polyfluoroalkyl substances (PFAS) are a class of highly persistent contaminants that have been linked to human health effects at low exposure concentrations. Public concerns exist that land-application of biosolids may result in the release of PFAS into terrestrial and aquatic ecosystems. The relative importance of inorganic constituents such as Fe and Al, which are known to impact PFAS retention/release behavior in soils, on PFAS release from wastewater residuals (WWRs, i.e., biosolids and sewage sludges) is not well understood. Here, we examine native concentrations and WWR-water partition coefficients of a range of PFAS in the context of WWRs characteristics including oxalate-extractable Fe and Al, organic matter (OM), dissolved organic carbon, and total protein content. Total PFAS concentrations, which included perfluoroalkyl carboxylates, perfluoroalkyl sulfonates, fluorotelomer sulfonates and some sulfonamides, ranged from ∼480 to 3500 µg PFAS kg-1 dry weight. PFAS WWR-water partition coefficients ranged from ∼10 to 20,000 L kg-1, consistent with the literature. PFAS partitioning was significantly correlated to oxalate extractable Al and Fe as well as bulk OM and protein content. These results have important implications for wastewater treatment facilities that recycle Al- and Fe-based drinking water treatment residuals in terms of both PFAS retention and loading.

Occurrence and implications of per and polyfluoroalkyl substances in animal feeds used in laboratory toxicity testing.

The exceptional thermal and chemical stability and the amphiphilicity of per- and polyfluoroalkyl substances (PFAS) have resulted in widespread use and subsequent contamination in environmental media and biota. Concerns surrounding toxicity have led to numerous animal-based toxicity studies. Due to the ubiquity of PFAS and the low parts per trillion (ppt) health advisory levels for drinking water, several contamination elimination protocols have been implemented. In addition, it is urgently necessary to perform low-dose experiments, but due to unknown pathways for entry of unwanted PFAS, low-dose studies are extremely challenging to conduct. However, animal feed sources are a likely route that could introduce unwanted PFAS into experiments, yet investigations of PFAS in common animal feeds are lacking. Here, we report the examination of PFAS levels in eighteen different animal feeds, representing a range of diets fed to diverse taxa. We evaluated whether PFAS levels in feeds were correlated with ingredient composition (plant versus animal-based) or dietary habits of lab animals (amphibian, fish, invertebrate, mammal). PFOS, PFHxS, PFOA, and short-chain perfluoroalkyl carboxylic acids had the highest detection levels and frequencies across all samples. Different food ingredients led to different PFAS profiles. No meaningful levels of PFAS precursors were detected. We demonstrate that PFAS contamination in animal feed is pervasive. Reducing food-sourced PFAS is a critical, albeit challenging task to improve interpretability of in vivo exposures.