Boundary mode lubrication of articular cartilage with a biomimetic diblock copolymer.

We report the design of a diblock copolymer with architecture and function inspired by the lubricating glycoprotein lubricin. This diblock copolymer, synthesized by sequential reversible addition-fragmentation chain-transfer polymerization, consists of a cationic cartilage-binding domain and a brush-lubricating domain. It reduces the coefficient of friction of articular cartilage under boundary mode conditions (0.088 ± 0.039) to a level equivalent to that provided by lubricin (0.093 ± 0.011). Additionally, both the EC50 (0.404 mg/mL) and cartilage-binding time constant (7.19 min) of the polymer are comparable to purified human and recombinant lubricin. Like lubricin, the tribological properties of this polymer are dependent on molecular architecture. When the same monomer composition was evaluated either as an AB diblock copolymer or as a random copolymer, the diblock effectively lubricated cartilage under boundary mode conditions whereas the random copolymer did not. Additionally, the individual polymer blocks did not lubricate independently, and lubrication could be competitively inhibited with an excess of binding domain. This diblock copolymer is an example of a synthetic polymer with lubrication properties equal to lubricin under boundary mode conditions, suggesting its potential utility as a therapy for joint pathologies like osteoarthritis.

Dynamics of Synovial Fluid Aggregation under Shear.

The synovial fluid (SF) that lubricates articular joints exhibits complex rheological and tribological properties due to the interactions and behaviors of its various molecular components. Under shear, SF films abruptly thicken by more than 300% and large, dense aggregates form within the fluid. In this study, we used the Surface Force Apparatus to elucidate which SF components are involved in this shear-induced transformation by (i) determining which (if any) of all major SF components replicate the behavior of SF under shear and (ii) observing the effect of removing implicated components from SF by enzymatic digestion. While most previous studies of SF have focused on the tribological roles of lubricin or hyaluronic acid, our results indicate that albumin is a key contributor to the formation of aggregates in SF under shear. Our results also suggest that SF aggregation is associated with efficient surface protection against wear. As our findings are based on experiments involving rigid, nonporous surfaces, they may be used to investigate shear-mediated aggregation mechanisms occurring during the lubrication of artificial joints, ultimately advancing our current vision of implant design.

Fibronectin mediates enhanced wear protection of lubricin during shear.

Fibronectin (FN) is a glycoprotein found in the superficial zone of cartilage; however, its role in the lubrication and the wear protection of articular joints is unknown. In this work, we have investigated the molecular interactions between FN and various components of the synovial fluid such as lubricin (LUB), hyaluronan (HA), and serum albumin (SA), which are all believed to contribute to joint lubrication. Using a Surface Forces Apparatus, we have measured the normal (adhesion/repulsion) and lateral (friction) forces across layers of individual synovial fluid components physisorbed onto FN-coated mica substrates. Our chief findings are (i) FN strongly tethers LUB and HA to mica, as indicated by high and reversible long-range repulsive normal interactions between surfaces, and (ii) FN and LUB synergistically enhance wear protection of surfaces during shear, as suggested by the structural robustness of FN+LUB layers under pressures up to about 4 MPa. These findings provide new insights into the role of FN in the lubricating properties of synovial fluid components sheared between ideal substrates and represent a significant step forward in our understanding of cartilage damage involved in diseases such as osteoarthritis.

Interaction with Cartilage Increases the Viscosity of Hyaluronic Acid Solutions.

Injection of hyaluronic acid (HA) viscosupplements is a prevalent treatment for patients suffering from mild to moderate osteoarthritis. The efficacy of these supplements is attributed to increased synovial fluid viscosity, which leads to improved lubrication and reduced pain. Therefore, viscosity is a key parameter to consider in the development of HA supplements. HA localizes near the cartilage surface, resulting in a viscosity gradient with heightened viscosity near the surface. Traditional rheological measurements confine HA between metal fixtures and therefore do not capture the effect of HA localization that occurs on cartilage. In these experiments, we investigate the effect of modifying rheometer fixtures with cartilage surface coatings on the effective viscosity of HA solutions. Our results demonstrate up to a 20-fold increase in effective viscosity when HA was confined between cartilage surfaces compared to steel surfaces. For low-molecular-weight HA, the effective viscosity was dependent on the gap height between the rheometer plates, which is consistent with the formation of a viscous boundary film. Together, these results indicate that this method for assessing HA viscosity may be more relevant to lubrication than traditional methods and may provide a more accurate method for predicting the viscosity of HA viscosupplements in vivo where HA is able to interact with the cartilage surface.

Synergistic Interactions of a Synthetic Lubricin-Mimetic with Fibronectin for Enhanced Wear Protection.

Lubricin (LUB), a major mucinous glycoprotein of mammalian synovial fluids, is believed to provide excellent lubrication to cartilage surfaces. Consequently, when joint disease or replacement leads to increased friction and surface damage in the joint, robust synthetic LUB alternatives that could be used therapeutically to improve lubrication and surface protection are needed. Here, we report the characterization of a lubricating multiblock bottlebrush polymer whose architecture was inspired by LUB, and we investigate the role of fibronectin (FN), a glycoprotein found in the superficial zone of cartilage, in mediating the tribological properties of the polymer upon shear between mica surfaces. Our surface forces apparatus (SFA) normal force measurements indicate that the lubricin-mimetic (mimLUB) could be kept anchored between mica surfaces, even under high contact pressures, when an intermediate layer of FN was present. Additional SFA friction measurements show that FN would also extend the wearless friction regime of the polymer up to pressures of 3.4 MPa while ensuring stable friction coefficients (µ ≈ 0.28). These results demonstrate synergistic interactions between mimLUB and FN in assisting the lubrication and wear protection of ideal (mica) substrates upon shear. Collectively, these findings suggest that our proposed mimLUB might be a promising alternative to LUB, as similar mechanisms could potentially facilitate the interaction between the polymer and cartilage surfaces in articular joints and prosthetic implants in vivo.