Binding of Acetylated Lysine by Using a Water Soluble Aryl Extended Calix[4]pyrrole.

Post-translational modifications of lysine in histones, as methylation and acetylation, have well established functions in epigenetics and are emerging as important actors in broader biological regulation. Currently, the detection of acetylated lysine (Kac) in water solution as free amino acid or protein residue remains challenging. Acetylated lysine is a neutral amino acid, and the lack of ion-dipole interactions causes the decrease in binding affinity displayed by synthetic molecular receptors with respect to the other lysine modifications. Here, we report molecular modeling calculations and 1H NMR experiments to investigate the binding properties of two different calix[4]pyrrole receptors towards Kac. Computational analyses reveal that tetra-aryl-extended calix[4]pyrrole (1) preferentially binds the cis-Kac conformer over the trans one due to steric considerations and more favorable interactions. Experimental 1H NMR titration experiments confirm the formation of a 1 : 1 complex between receptor 1 and cis-Kac, with a Ka exceeding 103 M-1. Conversely, the super-aryl-extended calix[4]pyrrole 2 is less efficient in binding Kac, due to unfavorable solvation/desolvation effects, as proven by 1H NMR experiments. Moreover, receptor 1 showed a higher affinity for Kac over other lysine modifications, such as methylated lysines.

Tuning the Optical Properties Through Hydrogen Bond-assisted H-aggregate Formation: The ODIN Case.

The current work focuses on the investigation of two functionalized naphthyridine derivatives, namely ODIN-EtPh and ODIN-But, to gain insights into the hydrogen bond-assisted H-aggregate formation and its impact on the optical properties of ODIN molecules. By employing a combination of X-ray and electron crystallography, absorption and emission spectroscopy, time resolved fluorescence and ultrafast pump-probe spectroscopy (visible and infrared) we unravel the correlation between the structure and light-matter response, with a particular emphasis on the influence of the polarity of the surrounding environment. Our experimental results and simulations confirm that in polar and good hydrogen-bond acceptor solvents (DMSO), the formation of dimers for ODIN derivatives is strongly inhibited. The presence of a phenyl group linked to the ureidic unit favors the folding of ODIN derivatives (forming an intramolecular hydrogen bond) leading to the stabilization of a charge-transfer excited state which almost completely quenches its fluorescence emission. In solvents with a poor aptitude for forming hydrogen bonds, the formation of dimers is favored and gives rise to H aggregates, with a consequent considerable reduction in the fluorescence emission. The urea-bound phenyl group furtherly stabilizes the dimers in chloroform.

Two-photon microscopy as a visual tool for polymer compatibilization monitoring: the PE-EVOH case.

In this study, we present two-photon microscopy (2PM) as an original technique to investigate the compatibilization between PE-HEMA and EVOH at the sub-micrometer level, both on the surface and in the bulk. 2PM is a nonlinear fluorescence imaging technique commonly exploited for thick biological tissue analysis. Here, we use 2PM to visualize polymer blending through 3D images of the obtained films. Compatibilization was performed in solution, upon functionalization of PE-HEMA with 1.4% molar of ODIN, a fluorescent molecule able to form multiple hydrogen bonds with EVOH and to act as a fluorescent probe. Different blends were synthesized, and the obtained films were analyzed by 2PM. For all compositions, it was demonstrated that ODIN is evenly distributed both on the surface and in the bulk. 2PM analysis of the thermally reprocessed specimen revealed that repeated reprocessing allows the reformation of ODIN dimers as the most stable H-bonding array in the solid state, partially reversing the compatibilization.

Reusable Cavitand-Based Electrospun Membranes for the Removal of Polycyclic Aromatic Hydrocarbons from Water.

The removal of toxic and carcinogenic polycyclic aromatic hydrocarbons (PAHs) from water is one of the most intractable environmental problems nowadays, because of their resistance to remediation. This work introduces a highly efficient, regenerable membrane for the removal of PAHs from water, featuring excellent filter performance and pH-driven release, thanks to the integration of a cavitand receptor in electrospun polyacrylonitrile (PAN) fibers. The role of the cavitand receptor is to act as molecular gripper for the uptake/release of PAHs. To this purpose, the deep cavity cavitand BenzoQxCav is designed and synthetized and its molecular structure is elucidated via X-Ray diffraction. The removal efficiency of the new adsorbent material toward the 16 priority PAHs is demonstrated via GC-MS analyses at ng L-1 concentration. A removal efficiency in the 32%, to 99% range is obtained. The regeneration of the membrane is performed by exploiting the pH-driven conformational switching of the cavitand between the vase form, where the PAHs uptake takes place, to the kite one, where the PAHs release occurs. The absorbance and regeneration capability of the membrane are successfully tested in four uptake/release cycles and the morphological stability.

Selective and Reversible Solvent Uptake in Tetra-4-(4-pyridyl)phenylmethane-based Supramolecular Organic Frameworks.

The dynamic behavior of supramolecular organic frameworks (SOFs) based on the rigid tetra-4-(4-pyridyl)phenylmethane (TPPM) organic tecton has been elucidated through 3D electron diffraction, X-ray powder diffraction and differential scanning calorimetry (DSC) analysis. The SOF undergoes a reversible single-crystal-to-single-crystal transformation when exposed to vapours of selected organic solvents, moving from a closed structure with isolated small voids to an expanded structure with solvated channels along the b axis. The observed selectivity is dictated by the fitting of the guest in the expanded SOF, following the degree of packing coefficient. The effect of solvent uptake on TPPM solid-state fluorescence was investigated, evidencing a significant variation in the emission profile only in the presence of chloroform.

Encapsulation of Trimethine Cyanine in Cucurbit[8]uril: Solution versus Solid-State Inclusion Behavior.

Inclusion of polymethine cyanine dyes in the cavity of macrocyclic receptors is an effective strategy to alter their absorption and emission behavior in aqueous solution. In this paper, the effect of the host-guest interaction between cucurbit[8]uril (CB[8]) and a model trimethine indocyanine (Cy3) on dye spectral properties and aggregation in water is investigated. Solution studies, performed by a combination of spectroscopic and calorimetric techniques, indicate that the addition of CB[8] disrupts Cy3 aggregates, leading to the formation of a 1 : 1 host-guest complex with an association constant of 1.5×106  M-1 . At concentrations suitable for NMR experiments, the slow formation of a supramolecular polymer was observed, followed by precipitation. Single crystals X-ray structure elucidation confirmed the formation of a polymer with 1 : 1 stoichiometry in the solid state.

Multidentate, V-Shaped Pyridine Building Blocks as Tectons for Crystal Engineering.

The formation of supramolecular structural units through self-assembly is a powerful method to design new architectures and materials endowed with specific properties. With the aim of adding a group of versatile tectons to the toolkit of crystal engineers, we have devised and synthesised four new V-shaped building blocks characterised by an aryl acetylene scaffold comprising three substituted pyridine rings connected by two triple bonds. The judicious choice of different substituents on the pyridine rings provides these tectons with distinctive steric, electrostatic and self-assembly properties, which influence their crystal structures and their ability to form co-crystals. Co-crystals of the tectons with tetraiododifluorobenzene were obtained both via traditional and mechanochemical crystallisation strategies, proving their potential use in crystal engineering. The energetic contributions of the supramolecular interactions at play in the crystal lattice have also been evaluated to better understand their nature and strength and to rationalise their role in designing molecular crystals.

Biochemical sensing with macrocyclic receptors.

Preventive healthcare asks for the development of cheap, precise and non-invasive sensor devices for the early detection of diseases and continuous population screening. The actual techniques used for diagnosis, e.g. MRI and PET, or for biochemical marker sensing, e.g. immunoassays, are not suitable for continuous monitoring since they are expensive and prone to false positive responses. Synthetic supramolecular receptors offer new opportunities for the creation of specific, selective and cheap sensor devices for biological sensing of specific target molecules in complex mixtures of organic substances. The fundamental challenges faced in developing such devices are the precise transfer of the molecular recognition events at the solid-liquid interface and its transduction into a readable signal. In this review we present the progress made so far in turning synthetic macrocyclic hosts, namely cyclodextrins, calixarenes, cucurbiturils and cavitands, into effective biochemical sensors and the strategies utilized to solve the above mentioned issues. The performances of the developed sensing devices based on these receptors in detecting specific biological molecules, drugs and proteins are critically discussed.

Velcrand Functionalized Polyethylene.

Velcrands are a specific class of cavitands whose complementary surfaces induce self-dimerization. The insertion of a velcrand as physical cross-linking unit into a polymer is reported. To this purpose, the velcrand was functionalized at the lower rim with an isocyanate group. The functional velcrand was reacted with poly (ethylene-co-(2-hydroxethylmethacrylate)) (PE-HEMA), a polymer equipped with free hydroxyl groups suitable for reaction with the isocyanate group. The obtained functionalized polymer was characterized by nuclear magnetic resonance (NMR), differential scanning calorimetry (DSC), and Fourier transform infrared spectroscopy (FTIR), proving the introduction of velcraplexes in the polymer. Films with varying amounts of velcrands were obtained by solution casting and slow evaporation, testifying the processability of the functionalized polymers. The obtained films were used to measure the oxygen barrier properties of the functionalized material.

Self-Assembly of TbPc2 Single-Molecule Magnets on Surface through Multiple Hydrogen Bonding.

The complexation between 2-ureido-4[1H]-pyrimidinone (UPy) and 2,7-diamido-1,8-naphthyridine (NaPy) is used to promote the mild chemisorption of a UPy-functionalized terbium(III) double decker system on a silicon surface. The adopted strategy allows the single-molecule magnet behavior of the system to be maintained unaltered on the surface.

Environmental Gas Sensing with Cavitands.

Environmental gas sensing needs stringent sensor requirements in terms of sensitivity, selectivity and ruggedness. One of the major issues to be addressed is combining in a single device the conflicting requirements of molecular-level selectivity and low-ppb sensitivity. The exploitation of synthetic molecular receptors as sensing materials is particularly attractive to address the selectivity issue, to single out the desired analytes in the presence of overwhelming amounts of interferents. This minireview summarizes the strategies in environmental gas and vapor sensing using molecular receptors as selective hosts for specific analytes, with the main focus on cavitands. In particular, we highlight the use of these macrocycles as selective preconcentrator units to be integrated into portable devices for environmental monitoring. Depending on the class of analytes to be detected, the molecular recognition properties of cavitands can be manipulated through the proper choice of the bridging groups at the upper rim, and their transducer integration can be implemented through the manifold functionalization options at the lower rim.

Fluorinated Tetraphosphonate Cavitands.

Two synthetic protocols for the introduction of fluorine atoms into resorcinarene-based cavitands, at the lower and upper rim, respectively, are reported. Cavitand 1, bearing four fluorocarbon tails, and cavitand 2, which presents a fluorine atom on the para position of a diester phosphonate phenyl substituent, were synthesized and their complexation abilities toward the model guest sarcosine methyl ester hydrochloride were evaluated via NMR titration experiments. The effect of complexation on the 19F NMR resonance of the probe is evident only in the case of cavitand 2, where the inset of the cation-dipole and H-bonding interactions between the P=O bridges and the guest is reflected in a sizable downfield shift of the fluorine probe.

Probing the Structural Determinants of Amino Acid Recognition: X-Ray Studies of Crystalline Ditopic Host-Guest Complexes of the Positively Charged Amino Acids, Arg, Lys, and His with a Cavitand Molecule.

Crystallization of tetraphosphonate cavitand Tiiii[H, CH3, CH3] in the presence of positively charged amino acids, namely arginine, lysine, or histidine, afforded host-guest complex structures. The X-ray structure determination revealed that in all three structures, the fully protonated form of the amino acid is ditopically complexed by two tetraphosphonate cavitand molecules. Guanidinium, ammonium, and imidazolium cationic groups of the amino acid side chain are hosted in the cavity of a phosphonate receptor, and are held in place by specific hydrogen bonding interactions with the P=O groups of the cavitand molecule. In all three structures, the positively charged α-ammonium groups form H-bonds with the P=O groups, and with a water molecule hosted in the cavity of a second tetraphosphonate molecule. Furthermore, water-assisted dimerization was observed for the cavitand/histidine ditopic complex. In this 4:2 supramolecular complex, a bridged water molecule is held by two carboxylic acid groups of the dimerized amino acid. The structural information obtained on the geometrical constrains necessary for the possible encapsulation of the amino acids are important for the rational design of devices for analytical and medical applications.

Cucurbit[7]uril-Dimethyllysine Recognition in a Model Protein.

Here, we provide the first structural characterization of host-guest complexation between cucurbit[7]uril (Q7) and dimethyllysine (KMe2 ) in a model protein. Binding was dominated by complete encapsulation of the dimethylammonium functional group. While selectivity for the most sterically accessible dimethyllysine was observed both in solution and in the solid state, three different modes of Q7-KMe2 complexation were revealed by X-ray crystallography. The crystal structures revealed also entrapped water molecules that solvated the ammonium group within the Q7 cavity. Remarkable Q7-protein assemblies, including inter-locked octahedral cages that comprise 24 protein trimers, occurred in the solid state. Cucurbituril clusters appear to be responsible for these assemblies, suggesting a strategy to generate controlled protein architectures.

The Origin of Selectivity in the Complexation of N-Methyl Amino Acids by Tetraphosphonate Cavitands.

We report on the eligibility of tetraphosphonate resorcinarene cavitands for the molecular recognition of amino acids. We determined the crystal structure of 13 complexes of the tetraphosphonate cavitand Tiiii[H, CH3, CH3] with amino acids. (1)H NMR and (31)P NMR experiments and ITC analysis were performed to probe the binding between cavitand Tiiii[C3H7, CH3, C2H5] or the water-soluble counterpart Tiiii[C3H6Py(+)Cl(-), CH3, C2H5] and a selection of representative amino acids. The reported studies and results allowed us (i) to highlight the noncovalent interactions involved in the binding event in each case; (ii) to investigate the ability of tetraphosphonate cavitand receptors to discriminate between the different amino acids; (iii) to calculate the Ka values of the different complexes formed and evaluate the thermodynamic parameters of the complexation process, dissecting the entropic and enthalpic contributions; and (iv) to determine the solvent influence on the complexation selectivity. By moving from methanol to water, the complexation changed from entropy driven to entropy opposed, leading to a drop of almost three orders in the magnitude of the Ka. However, this reduction in binding affinity is associated with a dramatic increase in selectivity, since in aqueous solutions only N-methylated amino acids are effectively recognized. The thermodynamic profile of the binding does not change in PBS solution. The pivotal role played by cation-π interactions is demonstrated by the linear correlation found between the log Ka in methanol solution and the depth of (+)N-CH3 cavity inclusion in the molecular structures. These findings are relevant for the potential use of phosphonate cavitands as synthetic receptors for the detection of epigenetic modifications of histones in physiological media.

Triptycene-Roofed Quinoxaline Cavitands for the Supramolecular Detection of BTEX in Air.

Two novel triptycene quinoxaline cavitands (DiTriptyQxCav and MonoTriptyQxCav) have been designed, synthesized, and applied in the supramolecular detection of benzene, toluene, ethylbenzene, and xylenes (BTEX) in air. The complexation properties of the two cavitands towards aromatics in the solid state are strengthened by the presence of the triptycene moieties at the upper rim of the tetraquinoxaline walls, promoting the confinement of the aromatic hydrocarbons within the cavity. The two cavitands were used as fiber coatings for solid-phase microextraction (SPME) BTEX monitoring in air. The best performances in terms of enrichment factors, selectivity, and LOD (limit of detection) values were obtained by using the DiTriptyQxCav coating. The corresponding SPME fiber was successfully tested under real urban monitoring conditions, outperforming the commercial divinylbenzene-Carboxen-polydimethylsiloxane (DVB-CAR-PDMS) fiber in BTEX adsorption.

Electrochemical decompatibilisation leads to morphology rearrangements in host-guest polymer blend films.

Controlled phase separation in a polymer film, with subsequent morphology rearrangement on the micro-scale, provides novel perspectives in smart materials. Based on our experience on supramolecularly compatibilised polymer blends consisting of polystyrene and poly(butyl methacrylate), we demonstrate here physical segregation of the blend in the solid state by the application of an electrochemical stimulus. The thereby occurring changes in film morphology, namely the appearance of voids and grains, have been characterised by atomic force microscopy in spin coated and in Langmuir-Schaefer deposited films.

An electrochemiluminescence-supramolecular approach to sarcosine detection for early diagnosis of prostate cancer.

Monitoring Prostate Cancer (PCa) biomarkers is an efficient way to diagnosis this disease early, since it improves the therapeutic success rate and suppresses PCa patient mortality: for this reason a powerful analytical technique such as electrochemiluminescence (ECL) is already used for this application, but its widespread usability is still hampered by the high cost of commercial ECL equipment. We describe an innovative approach for the selective and sensitive detection of the PCa biomarker sarcosine, obtained by a synergistic ECL-supramolecular approach, in which the free base form of sarcosine acts as co-reagent in a Ru(bpy)3(2+)-ECL process. We used magnetic micro-beads decorated with a supramolecular tetraphosphonate cavitand (Tiiii) for the selective capture of sarcosine hydrochloride in a complex matrix like urine. Sarcosine determination was then obtained with ECL measurements thanks to the complexation properties of Tiiii, with a protocol involving simple pH changes - to drive the capture-release process of sarcosine from the receptor - and magnetic micro-bead technology. With this approach we were able to measure sarcosine in the µM to mM window, a concentration range that encompasses the diagnostic urinary value of sarcosine in healthy subjects and PCa patients, respectively. These results indicate how this ECL-supramolecular approach is extremely promising for the detection of sarcosine and for PCa diagnosis and monitoring, and for the development of portable and more affordable devices.

Exclusive recognition of sarcosine in water and urine by a cavitand-functionalized silicon surface.

A supramolecular approach for the specific detection of sarcosine, recently linked to the occurrence of aggressive prostate cancer forms, has been developed. A hybrid active surface was prepared by the covalent anchoring on Si substrates of a tetraphosphonate cavitand as supramolecular receptor and it was proven able to recognize sarcosine from its nonmethylated precursor, glycine, in water and urine. The entire complexation process has been investigated in the solid state, in solution, and at the solid-liquid interface to determine and weight all the factors responsible of the observed specificity. The final outcome is a Si-based active surface capable of binding exclusively sarcosine. The complete selectivity of the cavitand-decorated surface under these stringent conditions represents a critical step forward in the use of these materials for the specific detection of sarcosine and related metabolites in biological fluids.

The effect of number and position of P=O/P=S bridging units on cavitand selectivity toward methyl ammonium salts.

The present work reports the synthesis and complexation properties of five mixed bridge P=O/P=S cavitands toward N,N-methyl butyl ammonium chloride (1) as prototype guest. The influence of number and position of P=O and P=S groups on the affinity of phosphonate cavitands toward 1 is assessed via ITC titrations in DCE as solvent. Comparison of the resulting Kass values, the enthalpic and entropic contributions to the overall binding with those of the parent tetraphosphonate Tiiii and tetrathiophosphonate TSiiii cavitands allows one to single out the simultaneous dual H-bond between the cavitand and the salt as the major player in complexation.