A holistic framework of biochar-augmented cementitious products and general applications: Technical, environmental, and economic evaluation.

In the context of the circular economy, the development of innovative and low-carbon concrete that incorporates different kinds of waste materials is gaining attention among the research community, regulatory agencies, and policymakers. These materials can be incorporated into concrete mixtures as aggregates or as fillers for improvement of product properties. This study aims to identify reliable designs for biochar-augmented cementitious products and general applications through technical, environmental, and economic assessments. The outcomes demonstrate that 5 wt% biochar addition could enhance the compressive strength of the final products. Using biochar, together with other recycled materials, can enormously reduce the environmental impacts, especially for global warming, enabling biochar-augmented cementitious products and general application as carbon-negative resources. The highest GWP reduction reached -720 kg CO2/tonne, equal to a 200% saving. A high quantity of biochar could be included in several specific applications (up to 60 wt%). The economic assessment highlights that the proposed designs are cost-effective and carbon tax can be significantly reduced. Carbon credits can also be earned for some carbon-negative designs. These findings can serve to mitigate GHG emissions and provide decision-makers with a reliable and holistic framework towards the goal of carbon neutrality.

Using a new incentive mechanism to improve wastewater sector performance: the case study of Italy.

The system of "Service Objectives", introduced by the Italian National Strategic Framework 2007-2013, is an innovative results-oriented programme concerning 4 thematic areas (education, care for the elderly and children, management of municipal solid wastes and integrated water service) in which the Ministry of Economic Development and eight Southern Italy districts are involved. The system was initially associated to an incentive mechanism which provided subsidies for a total amount of EUR 3 billion from the national Underdeveloped Areas Fund, according to the achievement of specific targets set for 11 service indicators in 2013. The indicators used for the integrated water service refer to the efficiency in water supply service as well as the coverage of wastewater treatment service. The aim of the study is to describe the activities carried out in Italy by the ENEA Agency in order to define a new performance indicator for wastewater treatment service taking into account the appropriateness and efficiency of existing plants equipment and, consequently, evaluating economic incentives. The proposed procedure takes into account both wastewater treatment demand and quality of wastewater treatment service offered to citizens. Input data, provided by the National Institute of Statistics (ISTAT), were elaborated in order to define appropriate parameters, with a multi-criteria analysis being used to define the new performance indicator. The applicability of the proposed procedure was verified considering all the 8 Southern Italy and Island districts (Abruzzo, Molise, Campania, Apulia, Basilicata, Calabria, Sicily and Sardinia) involved in the programme. The obtained results show that the quality of municipal wastewater may influence the calculation of the incentive amount. The performance indicators defined in this work might be conveniently extended to other contexts similar to the assessed geographical area (Southern Italy and Islands).

Full-scale treatment of wastewater from a biodiesel fuel production plant with alkali-catalyzed transesterification.

The treatment of wastewater derived from a biodiesel fuel (BDF) production plant with alkali-catalyzed transesterification was studied at full scale. The investigated wastewater treatment plant consisted of the following phases: primary adsorption/coagulation/flocculation/sedimentation processes, biological treatment with the combination of trickling filter and activated sludge systems, secondary flocculation/sedimentation processes, and reverse osmosis (RO) system with spiral membranes. All the processes were developed in a continuous mode, while the RO experiment was performed with batch tests. Two types of BDF wastewater were considered: the first wastewater (WW1) had an average total chemical oxygen demand (COD), pH and feed flow rate of 10,850.8 mg/L, 5.9 and 2946.7 L/h, respectively, while the second wastewater (WW2) had an average total COD, pH and feed flow rate of 43,898.9 mg/L, 3.3 and 2884.6 L/h, respectively. The obtained results from the continuous tests showed a COD removal percentage of more than 90% for the two types of wastewater considered. The removal of biorefractory COD and salts was obtained with a membrane technology in order to reuse the RO permeate in the factory production cycle. The rejections percentage of soluble COD, chlorides and sulphates were 92.8%, 95.0% and 99.5%, respectively. Because the spiral membranes required a high number of washing cycles, the use of plane membranes was preferable. Finally, the RO reject material should be evaporated using the large amount of inexpensive heat present in this type of industry.

An economic and environmental analysis of wine packaging systems in Italy: A life cycle (LC) approach.

The main aim of this study was to perform a combined life cycle assessment and life cycle costing of the most used wine packaging systems in Italy. Packaging plays a key role in food and beverage production and supply chain, but the increasing volume of packaging used causes many environmental concerns. The wine sector is no exception, especially in Italy that is the largest producer in the world. Eight packaging alternatives were compared in environmental and economic terms assuming a functional unit of three litres and a cradle to grave approach: one aseptic carton system, two bag-in-box systems, two PET bottle systems, and three glass bottle systems. The results were analysed with an eco-efficiency portfolio approach. There was consistency between the LCA and LCC results for most of the packaging systems. From both the environmental and economical point of views, aseptic cartons and bag-in-box systems were the most sustainable alternatives, while the glass systems had the worst global performances due to the high weight and consequent huge energy consumption during bottle production. The size of the containers was the key factor that most affected the results both in environmental and economic terms.

Life cycle assessment of end-of-life options for cellulose-based bioplastics when introduced into a municipal solid waste management system.

The partial degradation of cellulose-based bioplastics in industrial treatment of organic fraction of Municipal Solid Waste (MSW) opened to the investigation of further disposal routes for bioplastics in the waste management system. For this purpose, the environmental footprint of three MSW management scenarios differing only for the bioplastics final destination (organic, plastic or mixed waste streams) was assessed through a Life Cycle Assessment (LCA) approach. Results revealed how the treatment of bioplastics with organic waste achieved the worst environmental performance (5.8 kg CO2 eq/FU) for most impact categories. On the other hand, treatment with plastics and mixed waste achieved negative impact values (that mean avoided GHG emissions) of -9.8 and -7.7 kg CO2 eq/FU respectively, showing comparable benefits from these scenarios. The key reason was the lower quality of compost obtained from the organic treatment route, which reduced the environmental credits achieved by the energy recovery during anaerobic digestion.

Alternative seagrass wrack management practices in the circular bioeconomy framework: A life cycle assessment approach.

Despite providing important ecological functions, seagrass accumulation causes environmental and economic issues, including eutrophication and tourism reduction. Nowadays, seagrass wrack is commonly removed from the beaches and landfilled, which is considered the least desirable practice according to the European Union (EU) Waste Framework Directive. In this study, different management strategies for seagrass valorisation, including anaerobic digestion (AD), composting and ecological restoration, were considered using a life cycle assessment (LCA) perspective. The aim of the work was to evaluate more ecological and economic alternatives to landfill and to provide a robust evaluation method for public and private companies. An economic assessment was subsequently conducted, considering both direct and indirect impacts with a life cycle costing (LCC) approach. A selected beach located in the Northeast Mediterranean Sea was considered as a relevant case-study. The environmental impacts of the seagrass management scenarios were evaluated with the method ReCiPe 2016H, using both midpoint and endpoint levels. LCA results showed that ecological restoration and AD were the best alternatives in terms of environmental performances because of biogas production used as a renewable energy source. The impacts of the alternative management strategies were significantly lower than the current landfill strategy, -70% considering the categories of human health, ecosystems and resources, and -95% considering global warming potential category. The LCC analysis proved that composting was the best alternative (NPV > 1.27 M€), due to lower operating costs and higher fertilizer value. The obtained results can help beach management companies and public administrations to select the best operational strategies to reduce the environmental and economic impact of seagrass collection and treatment.

The use of LCA in selecting the best MSW management system.

This paper focuses on the study of eleven environmental impact categories produced by several municipal solid waste management systems (scenarios) operating on a provincial scale in Southern Italy. In particular, the analysis takes into account 12 management scenarios with 16 management phases for each one. The only difference among ten of the scenarios (separated kerbside collection of all recyclables, glass excepted, composting of putrescibles, RDF pressed bales production and incineration, final landfilling) is the percentage of separated collection varying in the range of 35-80%, while the other two scenarios, for 80% of separate collection, consider different alternatives in the disposal of treatment residues (dry residue sorting and final landfilling or direct disposal in landfill). The potential impacts induced on the environmental components were analysed using the life cycle assessment (LCA) procedure called "WISARD" (Waste Integrated System Assessment for Recovery and Disposal). Paper recycling was the phase with the greatest influence on avoided impacts, while the collection logistics of dry residue was the phase with the greatest influence on produced impacts. For six impact categories (renewable and total energy use, water, suspended solids and oxydable matters index, eutrophication and hazardous waste production), for high percentages of separate collection a management system based on recovery and recycling but without incineration would be preferable.

Environmental and economic benefits of the recovery of materials in a municipal solid waste management system.

The main aim of this study was to perform a Life cycle assessment study as well as an economic evaluation of the recovery of recyclable materials in a municipal solid waste management system. If citizens separate erroneously waste fractions, they produce both environmental and economic damages. The environmental and economic evaluation was performed for the case study of Nola (34.349 inhabitants) in Southern Italy, with a kerbside system that assured a source separation of 62% in 2014. The economic analysis provided a quantification of the economic benefits obtainable for the population in function of the achievable percentage of source separation. The comparison among the environmental performance of four considered scenarios showed that the higher the level of source separation was, the lower the overall impacts were. This occurred because, even if the impacts of the waste collection and transport increased, they were overcome by the avoided impacts of the recycling processes. Increasing the source separation by 1% could avoid the emission of 5 kg CO2 eq. and 5 g PM10 for each single citizen. The economic and environmental indicators defined in this study provide simple and effective information useful for a wide-ranging audience in a behavioural change programme perspective.

LCA of an ice cream cup of polyethylene coated paper: how does the choice of the end-of-life affect the results?

This study presents an evaluation of the environmental performance of an ice cream cup made of polyethylene (PE)/paper laminate using a life cycle assessment approach 'from cradle to grave'. Two opposite alternative disposal scenarios, as well as their intermediate combinations, were considered: 100% incineration and 100% landfilling. The environmental impacts were calculated using the EPD 2013 evaluation method since the study was developed in an Environmental Product Declaration perspective as well as the method ReCiPe 2008 H at the endpoint level. PE/paper laminate production was the most impactful process since it provided the highest contribution to total impacts in four of six impact categories considered. Ice cream cup production was the second impactful process. The 100% incineration scenario provided negligible contribution to life cycle total impact for all impact categories; while considering the landfilling scenario, the percentage contributions to the total impact provided by the end-of-life phase increased considerably, until to be comparable to the contributions provided by the production processes of the PE/paper laminate and the ice cream cup. The obtained results highlighted that different disposal scenarios can affect significantly the conclusions of a study. At the endpoint level, incineration was more environmentally sound than landfilling for all the ReCiPe damage categories.

Sustainability assessment of alternative end-uses for disused areas based on multi-criteria decision-making method.

The main aim of this study was to define and apply a multidisciplinary and multi-criteria approach to sustainability in evaluating alternative end-uses for disused areas. Taking into account the three pillars of sustainability (social, economic and environmental dimension) as well as the need for stakeholders to have new practical instruments, the innovative approach consists of four modules stated (i) sociological, (ii) economic, (iii) environmental and (iv) multi-criteria assessment. By means of a case study on a small Municipality in Southern Italy, three end-uses alternatives, representing three essential services for citizens, were selected: Municipal gym; Market area; Municipal Solid Waste (MSW) separate collection centre. The sociological module was useful to select the most socially sound alternative by means of a consultative referendum, simulated with the use of a structured questionnaire administered to a sample of the population. The economic evaluation was conducted defining the bill of quantities with regarding to six main items (soil handling, landfill disposal tax, public services, structure and services, completion work, equipment and furnishings). The environmental evaluation was performed applying the Delphi method with local technicians who were involved in a qualitative-quantitative evaluation of the three alternatives with regarding to eight possible environmental impacts (landscape impact, soil handling, odour, traffic, noise, atmospheric pollution, wastewater, waste). Finally, the Simple Additive Weighting was used as multi-criteria technique to define alternatives priorities. The obtained results showed how the multi-criteria analysis is a useful decision support tool able to identify transparently and efficiently the most sustainable solutions to a complex social problem.

Evaluating opinions, behaviours and motivations of the users of a MSW separate collection centre in the town of Baronissi, Southern Italy.

This paper presents the results of a survey regarding customer satisfaction as well as other aspects relating to the frequency and motivations of citizens going to a separate collection centre (SCC) for recyclables in a Southern Italian town. The study was carried out in 2015 to verify whether there were significant changes in the behaviours and opinions of the SCC's users, who had been interviewed in 2013, in the light of the change of the local administration. The majority of the respondents (60.4%) coupled going to the SCC with other tasks, with 58.6% of them going to a supermarket. Therefore, future SCCs should localized near shopping centres (it would be preferable to have small and numerous SCCs). Chi-square and Fisher's exact tests showed how SCC's users of the town under study behaved as a community. The percentage of respondents that declared to 'agree' or 'strongly agree' with the idea that only putrescibles and residue could be collected at their home, with all the other materials being collected at the SCC, increased from 56.6%, in 2013, up to 59.0%, in 2015. The percentage of respondents that declared going to the SCC due to environmental motivations was unanimous. Moreover, the saving of money for the community became the second preferred option, with a significant improvement (from 65.6%, in 2013, up to 93.2%, in 2015). Therefore, the community's interests over the individual's were privileged. The SCC's users confirmed their attention to environmental issues even though the local administration changed. It is probable that this could be the result of maintaining high standard of service as well as a good job in terms of communication, continuous involvment of citizens and the adoption of good environmental practices.

Using economic benefits for recycling in a separate collection centre managed as a "reverse supermarket": a sociological survey.

Separate collection centres (SCCs), where citizens can deliver recyclable fractions of municipal solid waste (MSW), in an "urban mining" perspective, can be considered a sort of "reverse supermarket", where people can deliver their recyclables in order to either obtain a waste fee reduction or shopping vouchers. The latter is the case of Baronissi, a town of around 17,000 inhabitants in the Province of Salerno, in the Campania region of Italy. The principal aim of the study was to investigate by means of a sociological survey the relationship between citizens and the separate collection program, with particular emphasis on the role played by the SCC. The separate collection system was evaluated either good or very good by 95.8% of the sample, while 99.2% expressed a good or very good evaluation of the quality of the service inside the separate collection centre: SCC users acted as a community as highlighted by the negative response of the Chi-square test for independence. Respecting the environment prevailed over saving time, obtaining eco-points, or saving money as the main reason why people went to the SCC. The majority of the respondents agreed if only putrescibles and residue should be collected directly from their homes, while all the other materials should be collected exclusively at the SCC, allowing to save money for the management of the kerbside collection system with a consequent further waste fee reduction for the residents.

Sociological survey in a municipality with a high level separate collection programme in an area of historic unpopularity.

Behaviours, opinions and knowledge of citizens on MSW and separate collection were investigated in the city of Mercato San Severino (about 22,000 people), in the Campania region of Southern Italy that is an area suffering from a serious solid waste emergency that has lasted over 17 years due to the absence of treatment facilities. The image of heaps of rubbish in the streets of Naples and other nearby cities is only one side of the coin. Mercato San Severino has adopted an effective kerbside collection system since 2001 and a pay-as-you-throw program during 2005, guaranteeing more than the minimum level of recycling required by the Italian legislation. Structured questionnaires were administered to a sample of 500 people in 2010. Chi-square tests of independence were applied to state whether the differences were statistically significant (5%). About 90% of the sample stated that the success of the separate collection program was due to either the citizens and local authority or only the local authority, highlighting the leading role of the local authority and confirming that trust is the key to any social program success. The registered level of knowledge was better than that of nearby university students and citizens. The higher the education level, the greater the level of knowledge was.

Using MCDA and GIS for hazardous waste landfill siting considering land scarcity for waste disposal.

The main aim of this study was to develop a procedure that minimizes the wasting of space for the siting of hazardous waste landfills as part of a solid waste management system. We wanted to tackle the shortage of land for waste disposal that is a serious and growing problem in most large urban regions. The procedure combines a multi-criteria decision analysis (MCDA) approach with a geographical information system (GIS). The GIS was utilised to obtain an initial screening in order to eliminate unsuitable areas, whereas the MCDA was developed to select the most suitable sites. The novelty of the proposed siting procedure is the introduction of a new screening phase before the macro-siting step aimed at producing a "land use map of potentially suitable areas" for the siting of solid waste facilities which simultaneously takes into consideration all plant types. The issue of obtaining sites evaluations of a specific facility was coupled with the issue of not wasting land appropriate to facilitate other types of waste management options. In the developed case study, the use of an innovative criteria weighting tool (the "Priority Scale") in combination with the Analytic Hierarchy Process was useful to easier define the priorities of the evaluation criteria in comparison with other classic methods such as the Paired Comparison Technique in combination with the Simple Additive Weighting method.

Public perception of odour and environmental pollution attributed to MSW treatment and disposal facilities: a case study.

If residents' perceptions, concerns and attitudes towards waste management facilities are either not well understood or underestimated, people can produce strong opposition that may include protest demonstrations and violent conflicts such as those experienced in the Campania Region of Italy. The aim of this study was to verify the effects of the closure of solid waste treatment and disposal facilities (two landfills and one RDF production plant) on public perception of odour and environmental pollution. The study took place in four villages in Southern Italy. Identical questionnaires were administered to residents during 2003 and after the closure of the facilities occurred in 2008. The residents' perception of odour nuisance considerably diminished between 2003 and 2009 for the nearest villages, with odour perception showing an association with distance from the facilities. Post closure, residents had difficulty in identifying the type of smell due to the decrease in odour level. During both surveys, older residents reported most concern about the potentially adverse health impacts of long-term exposure to odours from MSW facilities. However, although awareness of MSW facilities and concern about potentially adverse health impacts varied according to the characteristics of residents in 2003, substantial media coverage produced an equalisation effect and increased knowledge about the type of facilities and how they operated. It is possible that residents of the village nearest to the facilities reported lower awareness of and concern about odour and environmental pollution because the municipality received economic compensation for their presence.

Using an innovative criteria weighting tool for stakeholders involvement to rank MSW facility sites with the AHP.

The main aim of this study was to verify the efficacy of using an innovative criteria weighting tool (the "priority scale") for stakeholders involvement to rank a list of suitable municipal solid waste (MSW) facility sites with the multi-criteria decision-making (MCDM) technique known as analytic hierarchy process (AHP). One of the main objectives of the study was to verify the behaviour of the "priority scale" with both technical and non-technical decision-makers. All over the world, the siting of MSW treatment or disposal plants is a complex process involving politicians, technicians as well as citizens, where stakeholders who are not effectively involved strongly oppose (or even obstruct) the realization of new facilities. In this study, in order to pursue both the technical (select the best site) and social aims (all the stakeholders have to give their aware contribution), the use of the "priority scale" is suggested as a tool to easily collect non-contradictory criteria preferences by the various decision-makers. Every decision-maker filled in "priority scale", which was subsequently uploaded in the AHP tool in order to indirectly calculate the individual priority of alternatives given by each stakeholder (not using group aggregation techniques). The proposed method was applied to the siting of a composting plant in an area suffering from a serious MSW emergency, which has lasted for over 15 years, in the Campania Region, in Southern Italy. The best site (the "first choice") was taken as the one that appeared the most times at the first place of each decision-maker ranking list. The involved technical and non-technical decision-makers showed the same behaviour in (indirectly) selecting the best site as well as in terms of the most appraised criteria ("absence of areas of the highest value for natural habitats and species of plants and animals"). Moreover, they showed the same AHP inconsistency ratio as well as the same behaviour in comparison with a "balanced decision-maker" (who assigns identical weights to all the considered criteria). Therefore, the proposed criteria weighting tool could be widely as well as easily used for stakeholders involvement to rank MSW facility sites (or other kinds of alternatives) with the AHP or with other MCDM techniques, taking or not into consideration group aggregation methods.

Public opinion and awareness towards MSW and separate collection programmes: a sociological procedure for selecting areas and citizens with a low level of knowledge.

The principal aim of this study was to define and apply a procedure based on a structured questionnaire survey useful to analyze the people's environmental knowledge in order to select the areas and age groups with a low level of knowledge in a municipality (in Southern Italy) and, therefore, suggest a specific educational campaign for each. The detailed sampling procedure made it possible to carry out a meticulous statistical analysis of the results. The youngest and oldest people showed the lowest level of awareness for each district. A high level of education did not necessarily imply a high level of environmental awareness as well as a greater acceptance of MSW facilities. The satisfaction level of the recycling program was higher amongst the oldest age group. All the citizens in the several areas were unanimous in pointing out the presence of dirt in the street as the main shortcoming of the bring separate collection program. Only the youngest age group self-criticised, considering that they revealed a low level of participation to the separate collection program. While, the oldest people retaining them less influential, claimed that the citizens were not responsible for the failure of the separate collection program. The prevailing opinion of the sample was that people protested against the construction of waste facilities because they were not well-informed, with the most significant opinion of all the age subdivisions being that incineration is a hazardous treatment. The presence of criminal organizations was indicated as the main reason why the Campania Region suffers a serious solid waste emergency. While, the percentage of people pointing their finger at politicians increases with the average age of the respondents with there being a very strong correlation (r(2)=0.9903).

Carbon and nitrogen removal from low-strength domestic wastewater with a two-stage submerged biological filter.

The aim of the present study was to evaluate the secondary and tertiary treatment of low -strength domestic wastewater with submerged biological filters (BFs). The experiments were carried out with a two-stage pilot plant consisting of two subsequent filter columns. In the first aerated reactor, the removal of carbon and nitrification was accomplished (secondary nitrification); while, in the second anoxic reactor a post-denitrification process with methanol as external carbon source was performed. During the 3 months of experimental period, in average terms, Total Suspended Solids (TSS) concentrations of 156 mg/L were reduced to 5 mg/L; Chemical Oxygen Demand (COD) concentrations of 179 mg/L were reduced to 43 mg/L. In the secondary nitrification, mean influent NH(4)(+) concentrations of 6.1 mg/L were reduced to average values of 1.8 mg/L. During the post-denitrification, mean influent NO(3)(-) concentrations of 12.0 mg/L were reduced to average values of 6.1 mg/L. The overall process produced a backwashing effluent with an average concentration of about 175 mg/L of TSS.

Performance of vegetated and non-vegetated vertical flow reed beds in the treatment of diluted leachate.

This study was undertaken to investigate the behaviour of a vertical flow reed bed system with 3 kind of wastewaters (W1, W2 and W3) and for two hydraulic retention times (3 and 7 days) as well as to assess the role of Phragmites Australis in constructed wetland treatment processes. The adopted batch experimental system consisted of six vertical flow filters, filled with granular media and planted with reeds. For each vegetated reactor there was a correspondent blank in order to make a comparison. Wastewaters were obtained mixing tap water, MSW landfill leachate and activated sludge in different percentages. W1, W2 and W3 were designed in order to reproduce treated or untreated wastewaters not in compliance with legislation in force (Directive 91/271/EEC), with increasing level of NH4+-N from W1 (16.3 mg/L) to W3 (76.0 mg/L). In average terms, 3 days was sufficient for W1 and W2 to face the compliance limits; while, for W3 even 7 days was not sufficient to respect the compliance limit for ammonia nitrogen (1.4 times greater). The obtained results shown that the vegetation played an essential role especially in the removal of nitrogen: for the wastewater with the highest loads the contribution of reeds in the removal of nitrogen was greater than that of biofiltration processes. The contribution of the vegetation was also detectable in the removal of orthophosphate, but with minus efficiency.

Combined carbonaceous removal and nitrification with biological aerated filters.

This paper describes the use of a submerged biological aerated filter (BAFs), on a pilot plant scale, in the secondary nitrification of low strength domestic wastewater. The results, obtained throughout three months of tests, confirmed the ability of BAFs to obtain simultaneous carbonaceous removal and nitrification. In fact, alter a start-up period of 5 weeks, a remarkable steady state condition in the removal of suspended solids (TSS), chemical oxygen demand (COD) and nitrification was reached. For a hydraulic loading rate of 1.6 m3 m(-2) h(-1), the mean efficiency of the process in the removal of TSS and COD was 85% and 83% respectively. Mean concentrations in the influent flow of around 114 mg(TSS)/L and 140 mg(COD)/L were reduced to average values of below 17 mg(TSS)/L and 25 mg(COD)/L. Secondary nitrification was achieved with a mean efficiency of 85% for a mean volumetric loads of 0.45 kg(N-Namm) m(-3) d(-1) (25 degrees C). Through an intensive activity of nitrification, in the steady state condition, mean influent concentrations of around 12 mg(N-Namm)/L were reduced to average values of below 2 mg(N-Namm)/L. The removal loading rate increased linearly with the applied loading rate for volumetric loads of up to 0.7 kg(N-Namm) m(-3) d(-1). The nitrification was not sensitive to the applied COD loads because of the low level of carbon substrate.