Möbius Strip Microlasers: A Testbed for Non-Euclidean Photonics.

We report on experiments with Möbius strip microlasers, which were fabricated with high optical quality by direct laser writing. A Möbius strip, i.e., a band with a half twist, exhibits the fascinating property that it has a single nonorientable surface and a single boundary. We provide evidence that, in contrast to conventional ring or disk resonators, a Möbius strip cavity cannot sustain whispering gallery modes (WGM). Comparison between experiments and 3D finite difference time domain (FDTD) simulations reveals that the resonances are localized on periodic geodesics.

λ³/1000 plasmonic nanocavities for biosensing fabricated by soft UV nanoimprint lithography.

Arrays of plasmonic nanocavities with very low volumes, down to λ(3)/1000, have been fabricated by soft UV nanoimprint lithography. Nearly perfect omnidirectional absorption (3-70°) is demonstrated for the fundamental mode of the cavity (λ ≃ 1.15 µm). The second-order mode exhibits a sharper resonance with strong angular dependence and total optical absorption when the critical coupling condition is fulfilled (45-50°, λ ≃ 750 nm). It leads to high refractive index sensitivity (405 nm/RIU) and figure of merit (∼21) and offers new perspectives for efficient biosensing experiments in ultralow volumes.

Photonic crystal patterning of luminescent sol-gel films for light extraction.

Structured luminescent thin films are investigated in the context of improved light extraction of phosphors for solid-state-lighting applications. Thin films composed of a sol-gel titania matrix doped with europium chelates are studied as a model system. These films, patterned with a square photonic lattice by soft nanoimprint lithography, are characterized by angle-resolved fluorescence. Modeling of this simple technique is shown to fit well the experimental data, revealing in great detail the guided modes of the film and their extraction parameters. An eightfold extraction enhancement factor of the film emission is measured. To further improve the extraction efficiency, we investigate the role of an additional low-index mesoporous silica underlayer through its influence on the guided modes of different polarizations and their interactions with the photonic crystal. Results obtained on model systems open the way towards the optimization of light-emitting devices, using a strategy of dielectric microstructure engineering using the sol-gel process.

The Rotation of Microrobot Simplifies 3D Control Inside Microchannels.

This paper focuses on the control of rotating helical microrobots inside microchannels. We first use a 50 µm long and 5 µm in diameter helical robot to prove that the proximity of the channel walls create a perpendicular force on the robot. This force makes the robot orbit around the channel center line. We also demonstrate experimentally that this phenomenon simplifies the robot control by guiding it on a channel even if the robot propulsion is not perfectly aligned with the channel direction. We then use numerical simulations, validated by real experimental cases, to show different implications on the microrobot control of this orbiting phenomenon. First, the robot can be centered in 3D inside an in-plane microchannel only by controlling its horizontal direction (yaw angle). This means that a rotating microrobot can be precisely controlled along the center of a microfluidic channel only by using a standard 2D microscopy technology. Second, the robot horizontal (yaw) and vertical (pitch) directions can be controlled to follow a 3D evolving channel only with a 2D feedback. We believe this could lead to simplify imaging systems for the potential in vivo integration of such microrobots.

On-chip Microfluidic Multimodal Swimmer toward 3D Navigation.

Mobile microrobots have a promising future in various applications. These include targeted drug delivery, local measurement, biopsy or microassembly. Studying mobile microrobots inside microfluidics is an essential step towards such applications. But in this environment that was not designed for the robot, integration process and propulsion robustness still pose technological challenges. In this paper, we present a helical microrobot with three different motions, designed to achieve these goals. These motions are rolling, spintop motion and swimming. Through these multiple motions, microrobots are able to selectively integrate a chip through a microfluidic channel. This enables them to perform propulsion characterizations, 3D (Three Dimensional) maneuverability, particle cargo transport manipulation and exit from the chip. The microrobot selective integration inside microfluidics could lead to various in-vitro biologic or in-vivo biomedical applications.

Large area graphene nanomesh: an artificial platform for edge-electrochemical biosensing at the sub-attomolar level.

Recent advances in large area graphene growth have led to tremendous applications in a variety of areas. The graphene nanomesh with its tunable band-gap is of great interest for both fundamental research, to explore the effect of edges on both the 2D electrical conduction and its electrochemical behavior, and applications such as nanoelectronic devices or highly sensitive biosensors. Here, we report on the fabrication of a large surface graphene nanomesh by nanoimprint lithography (NIL) to produce controlled artificial edges. The electrochemical response of this high quality single graphene layer imprinted nanomesh shows an enhancement in capacitance associated with faster electron transfer which can be attributed to the high density of edges. The electrochemical performances of this nanomesh graphene platform have been also studied for label-free DNA detection from Hepatitis C virus as a model. We demonstrate that such a nanomesh platform allows direct detection at the sub-attomolar level with more than 90% of molecules located on the imprinted artificial edges. Such a graphene nanomesh electrode will find useful future applications in the field of biosensing.