Spatially Confined Radical Addition Reaction for Electrochemical Synthesis of Carboxylated Graphene and its Applications in Water Desalination and Splitting.

Due to the chemical stability of graphene, synthesis of carboxylated graphene still remains challenging during the electrochemical exfoliation of graphite. In this work, a spatially confined radical addition reaction which occurs in the sub-nanometer scaled interlayers of the expanded graphene sheets for the electrochemical synthesis of highly stable carboxylated graphene is reported. Here, formate anions act as both intercalation ions and co-reactant acid for the confinement of electro-generated carboxylic radical (●COOH) in the sub-nanometer scaled interlayers, which facilitates the radical addition reaction on graphene sheets. The controllable carboxylation of graphene is realized by tuning the concentration of formate anions in the electrolyte solution. The high crystallinity of the obtained product indicates the occurrence of spatially confined ●COOH addition reaction between the sub-nanometer interlayers of expanded graphite. In addition, the carboxylated graphene have been used for water desalination and hydrogen/oxygen reduction reaction. Therefore, this work provides a new method for the in situ preparation of functionalized graphene through the electrolysis and its applications in water desalination and hydrogen/oxygen reduction reactions.

Sheet-Isolated MoS2 Used for Dispersing Pt Nanoparticles and its Application in Methanol Fuel Cells.

It is highly challenging to activate the basal plane and minimize the π-π stacking of MoS2 sheets, thus enhancing its catalytic performance. Here, we display an approach for making well-dispersed MoS2 . By using the N-doped multi-walled carbon nanotubes (NMWCNTs) as an isolation unit, the aggregation of MoS2 sheets was effectively reduced, favoring the dispersion of Pt nanoparticles (noted as Pt/NMWCNTs-isolated-MoS2 ). Excellent bifunctional catalytic performance for methanol oxidation and oxygen reduction reaction (MOR/ORR) were demonstrated by the produced Pt/NMWCNTs-isolated-MoS2 . In comparison to Pt nanoparticles supported on MoS2 (Pt/MoS2 ), the MOR activity (2314.14 mA mgpt -1 ) and stability (317.69 mA mgpt -1 after 2 h of operation) on Pt/NMWCNTs-isolatedMoS2 were 24 and 232 times higher, respectively. As for ORR, Pt/NMWCNTs-isolated-MoS2 holds large half-wave potential (0.88 V) and high stability (92.71 % after 22 h of operation). This work presents a tactic for activating the basal planes and reducing the π-π stacking of 2D materials to satisfy their applications in electrocatalysis. In addition, the proposed sheet-isolation method can be used for fabricating other 2D materials to promote the dispersion of nanoparticles, which assist its application in other fields of energy as well as the environment.

Adsorbed p-Aminothiophenol Molecules on Platinum Nanoparticles Improve Electrocatalytic Hydrogen Evolution.

Electrocatalytic hydrogen evolution is an important approach to produce clean energy, and many electrocatalysts (e.g., platinum) are developed for hydrogen production. However, the electrocatalytic efficiency of commonly used metal catalysts needs to be improved to compensate their high cost. Herein, the electrocatalytic efficiency of platinum nanoparticles (PtNPs) in hydrogen evolution is largely improved via simple surface adsorption of sub-monolayer p-aminothiophenol (PATP) molecules. The overpotential goes down to 86.1 mV, which is 50.2 mV lower than that on naked PtNPs. This catalytic activity is even better than that of 20 wt.% Pt/C, despite the much smaller active surface area of PATP-adsorbed PtNPs than Pt/C. It is theoretically and experimentally confirmed that the improved electrocatalytic activity in hydrogen evolution can be attributed to the change in electronic structure of PtNPs induced by surface adsorption of PATP molecules. More importantly, this strategy can also be used to improve the electrocatalytic activity of palladium, gold, and silver nanoparticles. Therefore, this work provides a simple, convenient, and versatile method for improving the electrocatalytic activity of metal nanocatalysts. This surface adsorption strategy may also be used for improving the efficiency of many other nanocatalysts in many reactions.

Plasmonic Photoelectrochemical Coupling Reactions of para-Aminobenzoic Acid on Nanostructured Gold Electrodes.

Surface plasmon resonance (SPR) bridges photonics and photoelectrochemistry by providing an effective interaction between absorption and confinement of light to surface electrons of plasmonic metal nanostructures (PMNs). SPR enhances the Raman intensity enormously in surface-enhanced Raman spectroscopy (SERS) and leads to the plasmon-mediated chemical reaction on the surface of nanostructured metal electrodes. To observe variations in chemical reactivity and selectivity, we studied the SPR photoelectrochemical reactions of para-aminobenzoic acid (PABA) on nanostructured gold electrodes. The head-to-tail coupling product "4-[(4-imino-2,5-cyclohexadien-1-ylidene)amino]benzoic acid (ICBA)" and the head-to-head coupling product p,p'-azodibenzoate (ADBA) were obtained from PABA adsorbed on PMN-modified gold electrodes. In particular, under acidic and neutral conditions, ICBA was obtained as the main product, and ADBA was obtained as the minor product. At the same time, under basic conditions, ADBA was obtained as the major product, and ICBA was obtained as the minor product. We have also provided sufficient evidence for the oxidation of the tail-to-tail coupling reaction product that occurred in a nonaqueous medium rather than in an aqueous medium. The above finding was validated by the cyclic voltammetry, SERS, and theoretical calculation results of possible reaction intermediates, namely, 4-aminophenlylenediamine, 4-hydroxyphenlylenediamine, and benzidine. The theoretical adsorption model and experimental results indicated that PABA has been adsorbed as para-aminobenzoate on the gold cluster in a bidentate configuration. This work offers a new view toward the modulation of selective surface catalytic coupling reactions on PMN, which benefits the hot carrier transfer efficiency at photoelectrochemical interfaces.

Plasmonic Hot Electron-Mediated Hydrodehalogenation Kinetics on Nanostructured Ag Electrodes.

An attractive field of plasmon-mediated chemical reactions (PMCRs) is developing rapidly, but there is still incomplete understanding of how to control the kinetics of such a reaction related to hot carriers. Here, we chose 8-bromoadenine (8BrAd) as a probe molecule of hot electrons to investigate the influence of the electrode potential, laser wavelength, and power on the PMCR kinetics on silver nanoparticle-modified silver electrodes. Plasmonic hot electron-mediated cleavage of the C-Br bond in 8BrAd has been investigated by combining in situ electrochemical surface-enhanced Raman spectroscopy and density functional theory calculations. The experimental and theoretical results reveal that the energy position of plasmon relaxation-generated hot electrons can be modulated conveniently by applied potentials and laser light. This allows the proposal of a mechanism of modulating the matching energy of the hot electron of plasmon relaxation to promote the efficiency of PMCRs in electrochemical interfaces. Our work will be helpful to design surface plasmon resonance photoelectrochemical reactions on metal electrode surfaces of nanostructures with higher efficiency.

A simple electrochemical platform based on pectin stabilized gold nanoparticles for picomolar detection of biologically toxic amitrole.

Amitrole is a biologically toxic nonselective herbicide which contaminates surface and ground waters at unprecedented rates. All reported modified electrodes that detect amitrole within sub-micromolar to nanomolar levels were based on the electro-oxidation of amitrole. Herein, we developed a new conceptual idea to detect picomolar concentrations of amitrole based on calcium cross linked pectin stabilized gold nanoparticle (CCLP-GNP) film modified electrode which was prepared by electrodeposition. When the electrochemical behavior of amitrole was investigated at the CCLP-GNP film, the reduction peak current of the GNPs linearly decreased as the concentration of amitrole increases. We have designed a determination platform based on the amitrole dependent decrease of the GNP cathodic peak. The described concept and high sensitivity of square wave voltammetry together facilitate the great sensing ability; as a result the described approach is able to reach a low detection limit of 36 pM which surpassed the detection limits of existing protocols. The sensor presents a good ability to determine amitrole in two linear concentration ranges: (1) 100 pM-1500 pM with a detection limit of 36 pM; (2) 100 nM-1500 nM with a detection limit of 20 nM. The preparation of CCLP-GNPs is simple, rapid and does not require any reducing agents.

Raman Monitoring of the Electro-Optical Synergy-Induced Enhancements in Carbon-Bromine Bond Cleavage, Reaction Rate, and Product Selectivity of p-Bromothiophenol.

Electro-optical synergy has recently been targeted to improve the separation of hot carriers and thereby further improve the efficiency of plasmon-mediated chemical reactions (PMCRs). However, the electro-optical synergy in PMCRs needs to be more deeply understood, and its contribution to bond dissociation and product selectivity needs to be clarified. Herein, the electro-optical synergy in plasmon-mediated reduction of p-bromothiophenol (PBTP) was studied on a plasmonic nanostructured silver electrode using in situ Raman spectroscopy and theoretical calculations. It was found that the electro-optical synergy-induced enhancements in the cleavage of carbon-bromine bonds, reaction rate, and product selectivity (4,4'-biphenyl dithiol vs thiophenol) were largely affected by the applied bias, laser wavelength, and laser power. The theoretical simulation further clarified that the strong electro-optical synergy is attributed to the matching of energy band diagrams of the plasmonic silver with those of the adsorbed PBTP molecules. A deep understanding of the electro-optical synergy in PBTP reduction and the clarification of the mechanism will be highly beneficial for the development of other highly efficient PMCRs.

Selective adsorption of cysteamine molecules on Au/TiO2 boosts visible light-driven photocatalytic hydrogen evolution.

Photocatalytic evolution of hydrogen is becoming a research hotspot because it can help to produce clean energy and reduce environmental pollution. Titanium dioxide (TiO2) and its composites are photocatalysts that are widely used in hydrogen evolution because of their high abundance in nature, low price, and high photo/chemical stability. However, their catalytic performances still need to be further improved, particularly in the visible light spectrum. Herein, visible light-driven photocatalytic evolution of hydrogen on Au/TiO2 nanocomposite is enhanced âˆ¼ 10 folds by selectively functionalizing the nanocomposite with cysteamine molecules. It is revealed that the amine group (-NH2) in cysteamine favors the transfer and separation of photo-generated hot carriers. The rate of hydrogen produced can be further tuned by varying the ionization of the functionalized molecules at different pH values. This work provides a simple, convenient, and effective method that can be used to improve the photocatalytic evolution of hydrogen. This method can also be used for many other nanocatalysts (e.g., Au-MoS2, Au-BiVO4) and catalytic reactions (e.g., carbon dioxide reduction, nitrogen reduction).

Quantification of the Real Plasmonic Field Transverse Distribution in a Nanocavity Using the Vibrational Stark Effect.

Quantifying the real plasmonic field strength experimentally has been long pursued in expanding the applications related to plasmonic enhancement. However, it is still an enormous challenge to determine the inhomogeneous plasmonic field distribution. Here, self-assembled monolayers (SAMs) of 4-mercaptobenzonitrile (MBN) are sandwiched as a gap spacer in a nanoparticle-on-mirror (NPoM) structure, effectively forming ultrahigh field enhancement to observe Stark shifts of the chemical bond. Transverse position-dependent Stark shifts of ν(C═C) and ν(C≡N) in the individual nanocavity measured by surface-enhanced Raman scattering (SERS) experiment combined with the Stark tuning rate by density functional theory (DFT) simulation accurately revealed the inhomogeneous plasmonic field transverse distribution and quantified the transverse plasmonic field strength up to ∼1.9 × 109 V/m, which matches the value predicted by finite element method (FEM) simulation. This work deepens the insight into plasmon-based technologies and will coordinate high-resolution techniques such as tip-enhanced Raman spectroscopy (TESR) to reveal the real plasmonic field distribution.

Composition-adjustable Mo6Co6C2/Co@carbon nanocage for enhanced oxygen reduction and evolution reactions.

Bifunctional oxygen electrocatalysts that hold outstanding activity and stability are highly crucial for the development of efficient rechargeable Zn-air batteries. Herein, cobalt-molybdenum-based bimetallic carbide and cobalt nanoparticles embedded N-doped carbon nanocages are synthesized via the pyrolysis of functionalized zeolitic imidazolate framework precursor originated from zeolitic imidazolate framework sequentially coated with polydopamine and phosphomolybdic acid. Furthermore, we revealed the composition-performance relationship based on the exploration of bifunctional performance on the pyrolysis products. More importantly, the synergy of multiple active sites with hollow structure gives the prepared catalyst a low overpotential (284 mV) for oxygen evolution reaction and high half-wave potential (0.865 V) for oxygen reduction reaction, besides an excellent bifunctional durability. Furthermore, the prepared catalyst as a cathode electrocatalyst grants the assembled rechargeable Zn-air batteries a high open-circuit voltage, power density, specific capacity, and remarkable charge-discharge cycle stability. This work provides a strategy for the integration and active-adjustment of bifunctional catalyst and its potential applications in water splitting and other catalytic reactions.

Boosting the Plasmon-Mediated Electrochemical Oxidation of p-Aminothiophenol with p-Hydroxythiophenol as Molecular Cocatalyst.

Plasmon-mediated electrochemistry is an emerging area of interest in which the electrochemical reactions are enhanced by employing metal nanostructures possessing localized surface plasmon resonance (LSPR). However, the reaction efficacy is still far below its theoretical limit due to the ultrafast relaxation of LSPR-generated hot carriers. Herein, we introduce p-hydroxythiophenol (PHTP) as a molecular cocatalyst to significantly improve the reaction efficacy in plasmon-mediated electrochemical oxidation of p-aminothiophenol (PATP) on gold nanoparticles. Using electrochemical techniques, in situ Raman spectroscopy, and theoretical calculations, we elucidate that the presence of PHTP improves the hot hole-mediated electrochemical oxidation of PATP by 2-fold through the trapping of plasmon-mediated hot electrons. In addition, the selectivity of PATP oxidation could also be modulated by the introduction of PHTP cocatalyst. This tactic of employing molecular cocatalyst can be drawn out to endorse various plasmonic electrochemical reactions because of its simple protocol, high efficiency, and high selectivity.

Plasmon-Mediated Photoelectrochemical Hot-Hole Oxidation Coupling Reactions of Adenine on Nanostructured Silver Electrodes.

Surface-enhanced Raman spectroscopy (SERS) has been widely applied in the identification and characterization of DNA structures with high efficiency. Especially, the SERS signals of the adenine group have exhibited high detection sensitivity in several biomolecular systems. However, there is still no unanimous conclusion regarding the interpretation of some special kinds of SERS signals of adenine and its derivatives on silver colloids and electrodes. This Letter presents a new photochemical azo coupling reaction for adenyl residues, in which the adenine is selectively oxidized to (E)-1,2-di(7H-purin-6-yl) diazene (azopurine) in the presence of silver ions, silver colloids, and electrodes of nanostructures under visible light irradiation. The product, azopurine, is first found to be responsible for the SERS signals. This photoelectrochemical oxidative coupling reaction of adenine and its derivatives is promoted by plasmon-mediated hot holes and is regulated by positive potentials and pH of solutions, which opens up new avenues for studying azo coupling in the photoelectrochemistry of adenine-containing biomolecules on electrode surfaces of plasmonic metal nanostructures.

Direct pyrolysis and ultrasound assisted preparation of N, S co-doped graphene/Fe3C nanocomposite as an efficient electrocatalyst for oxygen reduction and oxygen evolution reactions.

Bifunctional electrocatalysts to enable efficient oxygen reduction reaction (ORR) and oxygen evolution reaction (OER) are essential for fabricating high performance metal-air batteries and fuel cells. Here, a defect rich nitrogen and sulfur co-doped graphene/iron carbide (NS-GR/Fe3C) nanocomposite as an electrocatalyst for ORR and OER is demonstrated. An ink of NS-GR/Fe3C is developed by homogeneously dispersing the catalyst in a Nafion containing solvent mixture using an ultrasonication bath (Model-DC150H; power - 150 W; frequency - 40 kHz). The ultrasonically prepared ink is used for preparing the electrode for electrochemical studies. In the case of ORR, the positive half-wave potential displayed by NS-GR/Fe3C is 0.859 V (vs. RHE) and for the OER, onset potential is 1.489 V (vs. RHE) with enhanced current density. The optimized NS-GR/Fe3C electrode exhibited excellent ORR/OER bifunctional activities, high methanol tolerance and excellent long-term cycling stability in an alkaline medium. The observed onset potential for NS-GR/Fe3C electrocatalyst is comparable with the commercial noble metal catalyst, thereby revealing one of the best low-cost alternative air-cathode catalysts for the energy conversion and storage application.

Copper Nanoparticle and Nitrogen Doped Graphite Oxide Based Biosensor for the Sensitive Determination of Glucose.

Copper nanoparticles with the diameter of 50 ± 20 nm decorated nitrogen doped graphite oxide (NGO) have been prepared through a simple single step carbonization method using copper metal-organic framework (MOF), [Cu2(BDC)2(DABCO)] (where BDC is 1,4-benzenedicarboxylate, and DABCO is 1,4-Diazabicyclo[2.2.2]octane) as precursor. The surface morphology, porosity, surface area and elemental composition of CuNPs/NGO were characterized by various techniques. The as-synthesized CuNPs/NGO nanomaterials were coated on commercially available disposable screen-printed carbon electrode for the sensitive determination of glucose. We find that the modified electrode can detect glucose between 1 μM and 1803 μM (linear range) with good sensitivity (2500 μA mM−1 cm−2). Our glucose sensor also possesses low limits of detection (0.44 μM) towards glucose determination. The highly selective nature of the fabricated electrode was clearly visible from the selectivity studies. The practicability of CuNPs/NGO modified electrode has been validated in the human serum samples. The storage stability along with better repeatability and reproducibility results additionally substantiate the superior electrocatalytic activity of our constructed sensor towards glucose.

Molybdenum disulfide nanosheets coated multiwalled carbon nanotubes composite for highly sensitive determination of chloramphenicol in food samples milk, honey and powdered milk.

We have described a hybrid material that consists of molybdenum disulfide nanosheets (MoS2) coated on functionalized multiwalled carbon nanotubes (f-MWCNTs) for sensitive and selective determination of chloramphenicol (CAP). The MoS2/f-MWCNTs nanocomposite was successfully prepared through a hydrothermal process and its structure was characterized by scanning electron microscopy, transmission electron microscopy, energy-dispersive X-ray spectroscopy, electrochemical impedance spectroscopy and cyclic voltammetry. The MoS2/f-MWCNTs nanocomposite holds excellent electrochemical properties and it displays excellent electrocatalytic ability to CAP. Under optimized working conditions, the nanocomposite film modified electrode responds linearly to CAP in the concentration range of 0.08-1392µM. The detection limit was obtained as 0.015µM (±0.003). The electrode has high level of selectivity in presence of large excess concentrations of interfering species. In addition, the modified electrode offers satisfactory repeatability, reproducibility and stability. The practical applicability of the electrode was demonstrated in food samples such as, milk, powdered milk and honey samples and the recoveries are agreeable which clearly revealed its practical feasibility in food analysis.

Femtomolar detection of mercuric ions using polypyrrole, pectin and graphene nanocomposites modified electrode.

Several nanomaterials and techniques for the detection of mercuric ions (Hg(2+)) have been developed in the past decade. However, simple, low-cost and rapid sensor for the detection of heavy metal ions yet remains an important task. Herein, we present a highly sensitive electrochemical sensor for the femtomolar detection of Hg(2+) based on polypyrrole, pectin, and graphene (PPy/Pct/GR) which was prepared by one step electrochemical potentiodyanamic method. The effect of concentration of pectin, polypyrrole and graphene were studied for the detection of Hg(2+). The influence of experimental parameters including effect of pH, accumulation time and accumulation potential were also studied. Different pulse anodic stripping voltammetry was chosen to detect Hg(2+) at PPy/Pct/GR/GCE modified electrode. The fabricated sensor achieved an excellent performance towards Hg(2+) detection such as higher sensitivity of 28.64µAµM(-1) and very low detection limit (LOD) of 4 fM at the signal to noise ratio of 3. The LOD of our sensor offered nearly 6 orders of magnitude lower than that of recommended concentration of Hg(2+) in drinking water by United States Environmental Protection Agency and World Health Organization. Compared to all previously reported electrochemical sensors towards Hg(2+) detection, our newly fabricated sensor attained a very LOD in the detection of Hg(2+). The practicality of our proposed sensor for the detection of Hg(2+) was successfully demonstrated in untreated tap water.

Green synthesized gold nanoparticles decorated graphene oxide for sensitive determination of chloramphenicol in milk, powdered milk, honey and eye drops.

A simple and rapid green synthesis using Bischofia javanica Blume leaves as reducing agent was developed for the preparation of gold nanoparticles (AuNPs). AuNPs decorated graphene oxide (AuNPs/GO) was prepared and employed for the sensitive amperometric determination of chloramphenicol. The green biosynthesis requires less than 40s to reduce gold salts to AuNPs. The formations of AuNPs and AuNPs/GO were evaluated by scanning electron and atomic force microscopies, UV-Visible and energy dispersive X-ray spectroscopies, X-ray diffraction studies, and electrochemical methods. AuNPs/GO composite film modified electrode was fabricated and shown excellent electrocatalytic ability towards chloramphenicol. Under optimal conditions, the amperometric sensing platform has delivered wide linear range of 1.5-2.95µM, low detection limit of 0.25µM and high sensitivity of 3.81µAµM(-1)cm(-2). The developed sensor exhibited good repeatability and reproducibility, anti-interference ability and long-term storage stability. Practical feasibility of the sensor has been demonstrated in food samples (milk, powdered milk and honey) and pharmaceutical sample (eye drops). The green synthesized AuNPs/GO composite has great potential for analysis of food samples in food safety measures.

Glucose biosensor based on glucose oxidase immobilized at gold nanoparticles decorated graphene-carbon nanotubes.

Biopolymer pectin stabilized gold nanoparticles were prepared at graphene and multiwalled carbon nanotubes (GR-MWNTs/AuNPs) and employed for the determination of glucose. The formation of GR-MWNTs/AuNPs was confirmed by scanning electron microscopy, X-ray diffraction, UV-vis and FTIR spectroscopy methods. Glucose oxidase (GOx) was successfully immobilized on GR-MWNTs/AuNPs film and direct electron transfer of GOx was investigated. GOx exhibits highly enhanced redox peaks with formal potential of -0.40 V (vs. Ag/AgCl). The amount of electroactive GOx and electron transfer rate constant were found to be 10.5 × 10(-10) mol cm(-2) and 3.36 s(-1), respectively, which were significantly larger than the previous reports. The fabricated amperometric glucose biosensor sensitively detects glucose and showed two linear ranges: (1) 10 µM - 2 mM with LOD of 4.1 µM, (2) 2 mM - 5.2 mM with LOD of 0.95 mM. The comparison of the biosensor performance with reported sensors reveals the significant improvement in overall sensor performance. Moreover, the biosensor exhibited appreciable stability, repeatability, reproducibility and practicality. The other advantages of the fabricated biosensor are simple and green fabrication approach, roughed and stable electrode surface, fast in sensing and highly reproducible.

Highly selective amperometric sensor for the trace level detection of hydrazine at bismuth nanoparticles decorated graphene nanosheets modified electrode.

A highly selective amperometric sensor was developed for the trace level determination of hydrazine at bismuth nanoparticles (Bi) decorated graphene nanosheets (GR) composite film modified glassy carbon electrode (GCE). GR-Bi nanocomposite has been successfully prepared via simple and facile chemical reduction approach and its structure was characterized by various techniques. Surface morphological and X-ray diffraction studies revealed the formation and high loading of Bi nanoparticles on graphene sheets. GR-Bi nanocomposite modified GCE exhibited greatly enhanced electrocatalytic performance towards electro-oxidation of hydrazine in terms of decrease in overpotential and increase in oxidation peak current (Ip). The kinetic parameters such as electron transfer coefficient (α) and diffusion coefficient (Do) of the hydrazine oxidation were determined to be 0.70 and 2.65×10(-5) cm(2) s(-1), respectively. An amperometric sensor has been fabricated which detects trace level concentration of hydrazine. The sensor exhibited a wide linear range from 20 nM to 0.28 mM and a very low detection limit (LOD) of 5 nM. Remarkably, this is the lowest LOD achieved for the determination of hydrazine in neutral pH among other reported electrochemical hydrazine sensors. In addition, the sensor selectively detects hydrazine even in the presence of 1000 fold excess quantity of common interferrants. The practical feasibility of the sensor has been assessed in water and urine samples with good recoveries. Furthermore, the sensor exhibited appreciable stability, repeatability and reproducibility results.

Immobilization of glucose oxidase on graphene and cobalt phthalocyanine composite and its application for the determination of glucose.

We described a simple and facile chemical reduction strategy for the preparation of graphene (GR)-cobalt phthalocyanine (CoPc) composite and explored it for the enzymatic determination of glucose. CoPc is an active mediator and electrocatalysts for the immobilization of GOx and determination of glucose. However, it is not stable on the electrode surface and also suffers from lack of conductivity. Here, we have employed GR as the suitable support to stabilize CoPc through simple chemical reduction method and the resulting composite has been used for the glucose biosensor application. Scanning electron microscopy, X-ray diffraction and Energy-dispersive X-ray spectroscopy studies confirmed the successful formation of composite. Direct electron transfer of glucose oxidase (GOx) was observed with well defined redox peaks at the formal potential of -0.44 V. The amount of electroactive GOx (Г) and electron transfer rate constant (ks) were calculated to be 3.77×10(-10) mol cm(-2) and 3.57 s(-1), respectively. The fabricated amperometric biosensor detects glucose in wide linear concentration range from 10 µM to 14.8 mM with high sensitivity of 5.0 9µA mM(-1) cm(-2). The sensor offered very low detection limit (LOD) of 1.6 µM. In addition, practical feasibility of the sensor has been explored in screen printing carbon electrode with accurate determination of glucose present in human blood serum and urine samples. Furthermore, the sensor exhibited appreciable stability, repeatability and reproducibility results.