Elimination of charge-carrier trapping by molecular design.

A common obstacle of many organic semiconductors is that they show highly unipolar charge transport. This unipolarity is caused by trapping of either electrons or holes by extrinsic impurities, such as water or oxygen. For devices that benefit from balanced transport, such as organic light-emitting diodes, organic solar cells and organic ambipolar transistors, the energy levels of the organic semiconductors are ideally situated within an energetic window with a width of 2.5 eV where charge trapping is strongly suppressed. However, for semiconductors with a band gap larger than this window, as used in blue-emitting organic light-emitting diodes, the removal or disabling of charge traps poses a longstanding challenge. Here we demonstrate a molecular strategy where the highest occupied molecular orbital and lowest unoccupied molecular orbital are spatially separated on different parts of the molecules. By tuning their stacking by modification of the chemical structure, the lowest unoccupied molecular orbitals can be spatially protected from impurities that cause electron trapping, increasing the electron current by orders of magnitude. In this way, the trap-free window can be substantially broadened, opening a path towards large band gap organic semiconductors with balanced and trap-free transport.

Inverted device architecture for high efficiency single-layer organic light-emitting diodes with imbalanced charge transport.

Many wide-gap organic semiconductors exhibit imbalanced electron and hole transport, therefore efficient organic light-emitting diodes require a multilayer architecture of electron- and hole-transport materials to confine charge recombination to the emissive layer. Here, we show that even for emitters with imbalanced charge transport, it is possible to obtain highly efficient single-layer organic light emitting diodes (OLEDs), without the need for additional charge-transport and blocking layers. For hole-dominated emitters, an inverted single-layer device architecture with ohmic bottom-electron and top-hole contacts moves the emission zone away from the metal top electrode, thereby more than doubling the optical outcoupling efficiency. Finally, a blue-emitting inverted single-layer OLED based on thermally activated delayed fluorescence is achieved, exhibiting a high external quantum efficiency of 19% with little roll-off at high brightness, demonstrating that balanced charge transport is not a prerequisite for highly efficient single-layer OLEDs.

Efficient deep-blue luminescence based on dual-channel intra/intermolecular exciplexes.

Highly efficient and stable blue organic light-emitting diodes (OLEDs) cannot be easily obtained simultaneously. In particular, the efficiency roll-off as a reference index to evaluate the lifetime of deep-blue OLED at high luminescence is still severe. A novel molecule (CzSiTrz) connected with carbazole and triazine fragments by a nonconjugated silicon atom is designed. An intramolecular charge transfer emission and intermolecular exciplex luminescence in the aggregated state are obtained, resulting in a dual-channel intra/intermolecular exciplex (DCIE) emission with fast and efficient reverse intersystem crossing (RISC). Deep-blue OLED with Commission Internationale de l'Eclairage (CIE) coordinates of (0.157, 0.076) and a record-high external quantum efficiency (EQE) of 20.35% at high luminance (5000 cd m-2) is accomplished. Simple molecular synthesis and device fabrication of this strategy give a unique approach to realizing high-performance deep-blue electroluminescence.

A thermally activated delayed fluorescence exciplex to achieve highly efficient and stable blue and green phosphorescent organic light-emitting diodes.

The development of a thermally activated delayed fluorescence (TADF) exciplex with high energy is of great significance in achieving highly efficient blue, green, and red organic light-emitting diodes (OLEDs) for use in full-color displays and white lighting. Highly efficient and stable blue and green phosphorescent OLEDs were demonstrated by employing a TADF exciplex (energy: 2.9 eV) based on 4-substituted aza-9,9'-spirobifluorenes (aza-SBFs). Blue PhOLEDs demonstrated a maximum current efficiency (CE) of 47.9 cd A-1 and an external quantum efficiency (EQE) of 22.5% at 1300 cd m-2 (2.5 times the values of aza-SBF-based systems), with the best blue PhOLED demonstrating a CE, power efficiency (PE) and EQE of 60.3 cd A-1, 52.7 lm W-1, and 26.2%, respectively. Green PhOLEDs exhibited a CE of 78.1 cd A-1 and EQE of 22.5% at 9360 cd m-2, with the best green PhOLED exhibiting a maximum CE, PE, and EQE of 87.4 cd A-1, 101.6 lm W-1, and 24.5%, respectively. The device operational lifetime was improved over 17-fold compared to reference devices because of the high thermal stability of the materials and full utilization of the TADF exciplex energy, indicating their potential for application in commercial OLEDs.

Efficient Deep-Blue Electrofluorescence with an External Quantum Efficiency Beyond 10.

The design of blue fluorescent materials combining both deep-blue emission (CIEy<0.06) and high-efficiency climbing over the typically limited exciton production efficiency of 25% is a challenge for organic light-emitting diodes (OLEDs). In this work, we have synthesized two blue luminogens, trans-9,10-bis(2-butoxyphenyl)anthracene (BBPA) and trans-9,10-bis (2,4-dimethoxyphenyl)anthracene with high photoluminescence quantum yields (PLQYs) of 89.5% and 87.0%, respectively. Intriguingly, we have proposed a strategy to avoid aggregation-caused quenching, which can effectively reduce the undesirable excimeric emission by introducing two host matrices with twisted molecular structure, 9,10-di(naphth-2-yl) anthracene and 10,10'-bis-(4-fluorophenyl)-3,3'-dimethyl-9,9'-bianthracene (MBAn-(4)-F), in the BBPA emission layer. The device containing the EML of BBPA-doped MBAn-(4)-F exhibited a high external quantum efficiency of 10.27% for deep-blue emission with the Commission International de L'Eclairage CIE coordinates of (0.15, 0.05) via the steric effect. Importantly, this represents an advance in deep-blue-emitting fluorescent OLED architectures and materials that meet the requirements of high-definition display.

Manipulation of Thermally Activated Delayed Fluorescence of Blue Exciplex Emission: Fully Utilizing Exciton Energy for Highly Efficient Organic Light Emitting Diodes with Low Roll-Off.

The application of exciplex energy has become a unique way to achieve organic light-emitting diodes (OLEDs) with high efficiencies, low turn-on voltage, and low roll-off. Novel δ-carboline derivatives with high triplet energy (T1 ≈ 2.92 eV) and high glass transition temperature (Tg ≈ 153 °C) were employed to manipulate exciplex emissions in this paper. Deep blue (peak at 436 nm) and pure blue (peak at 468 nm) thermally activated delayed fluorescence (TADF) of exciplex OLEDs were demonstrated by utilizing them as emitters with the maximum current efficiency (CE) of 4.64 cd A-1, power efficiency (PE) of 2.91 lm W-1, and external quantum efficiency (EQE) of 2.36%. Highly efficient blue phosphorescent OLEDs doped with FIrpic showed a maximum CE of 55.6 cd A-1, PE of 52.9 lm W-1, and EQE of 24.6% respectively with very low turn on voltage at 2.7 V. The devices still remain high CE of 46.5 cd A-1 at 100 cd m-2, 45.4 cd A-1 at 1000 cd m-2 and 42.3 cd A-1 at 5000 cd m-2 with EQE close to 20% indicating low roll-off. Manipulating blue exciplex emissions by chemical structure gives an ideal strategy to fully utilize all exciton energies for lighting of OLEDs.