Mixed-Linker Strategy for the Construction of Metal-Organic Framework Combined with Dyes toward Alcohol Detection.

Herein, a N-rich metal-organic framework (MOF) with four kinds of cages, Zn4(ade)2(TCA)2(H2O) (NENU-1000, Hade = adenine, H3TCA = 4,4',4″-tricarboxytriphenylamine, NENU = Northeast Normal University), was prepared by the mixed-ligand strategy. Cationic dyes can be selectively absorbed by NENU-1000 at proper concentrations, but not neutral and anionic dyes, which perhaps can be assigned to the N-rich neutral framework of NENU-1000. When NENU-1000 was introduced to a relatively lower concentration of cationic dye solutions (e.g., rhodamine B or basic red 2), the colors of these systems faded quickly. Furthermore, the faded solutions can be used for the detection of methanol and other small alcohol molecules with either the naked eye or common UV-vis spectra. The effect of the length of carbon chain, the position of the -OH group, and the number of the hydroxyl group of the alcohols was explored for the color development rate. In addition, the performance of NENU-1000 in iodine sorption and release was also studied.

Face-Sharing Archimedean Solids Stacking for the Construction of Mixed-Ligand Metal-Organic Frameworks.

Reticular chemistry has been an important guiding principle for the design of metal-organic frameworks (MOFs). This approach utilizes discrete building units (molecules and clusters) that are connected through strong bonds into extended networks assisted by topological considerations. Although the simple design principle of connecting points and lines has proved successful, new design strategies are still needed to further explore the structures and functions of MOFs. Herein, we report the design and synthesis of two mixed-ligand MOFs, [(CH3)2NH2]4[Zn4O]4[Zn(TCPP)]5[BTB]8/3 (PCN-137) and [Zr6(µ3-O)4(µ3-OH)4][TCPP][TBTB]8/3 (PCN-138) (BTB = 1,3,5-benzene(tris)benzoate, TBTB = 4,4',4″-(2,4,6-trimethylbenzene-1,3,5-triyl)tribenzoate, and TCPP = tetrakis(4-carboxyphenyl)porphyrin) by the stacking of face-sharing Archimedean solids. In these two MOFs, high-symmetrical metal clusters serve as vertices, and tritopic or tetratopic carboxylate ligands function as triangular and square faces, leading to the formation of two kinds of Archimedean solids (rhombicuboctahedron and cuboctahedron). Furthermore, the ordered accumulation of Archimedean solids successfully gives rise to 3D structures through face-sharing, highlighting the polyhedron-based approach for the design and preparation of MOFs. In addition, PCN-138 was utilized as a heterogeneous catalyst toward CO2 photoreduction under visible-light irradiation. This structure shows high photocatalytic activity, which can be attributed to the coexistence of photosensitizing porphyrin fragments and Zr-oxo centers within the PCN-138 scaffold.

Creating Well-Defined Hexabenzocoronene in Zirconium Metal-Organic Framework by Postsynthetic Annulation.

The incorporation of large π-conjugated ligands into metal-organic frameworks (MOFs) can introduce intriguing photophysical and electrochemical properties into the framework. However, these effects are often hindered by the strong π-π interaction and the low solubility of the arylated ligands. Herein, we report the synthesis of a porous zirconium-based MOF, Zr6(µ3-O)4(µ3-OH)4(OH)6(H2O)6(HCHC) (PCN-136, HCHC = hexakis(4-carboxyphenyl)hexabenzocoronene), which is composed of a hexacarboxylate linker with a π-conjugated hexabenzocoronene moiety. Direct assembly of the Zr4+ metal centers and the HCHC ligands was unsuccessful due to the low solubility and the unfavorable conformation of the arylated HCHC ligand. Therefore, PCN-136 was obtained from aromatization-driven postsynthetic annulation of the hexaphenylbenzene fragment in a preformed framework (pbz-MOF-1) to avoid π-π stacking. This postsynthetic modification was done through a single-crystal-to-single-crystal transformation and was clearly observable utilizing single -crystal X-ray crystallography. The formation of large π-conjugated systems on the organic linker dramatically enhanced the photoresponsive properties of PCN-136. With isolated hexabenzocoronene moieties as photosensitizers and Zr-oxo clusters as catalytic sites, PCN-136 was employed as an inherent photocatalytic system for CO2 reduction under visible-light irradiation, which showed increased activity compared with pbz-MOF-1.

Derivation and Decoration of Nets with Trigonal-Prismatic Nodes: A Unique Route to Reticular Synthesis of Metal-Organic Frameworks.

Quests for advanced functionalities in metal-organic frameworks (MOFs) inevitably encounter increasing complexity in their tailored framework architectures, accompanied by heightened challenges with their geometric design. In this paper, we demonstrate the feasibility of rationally exploiting topological prediction as a blueprint for predesigned MOFs. A new triangular frusta secondary building unit (SBU), {Zn4(tz)3}, was bridged by three TDC(2-) fragments to initially form a trigonal prismatic node, {Zn8(tz)6(TDC)3} (Htz = 1H-1,2,3-triazole and H2TDC = 2,5-thiophenedicarboxylic acid). Furthermore, the trigonal prism unit can be considered as a double SBU derived from triply bound triangular frusta. By considering theoretical derived nets for linking this trigonal-prismatic node with ditopic, tritopic, and tetratopic linkers, we have synthesized and characterized a new family of MOFs that adopt the decorated lon, jea, and xai nets, respectively. Pore sizes have also been successively increased within TPMOF-n family, which facilitates heterogeneous biomimetic catalysis with Fe-porphyrin-based TPMOF-7 as a catalyst.

The Enhancement on Proton Conductivity of Stable Polyoxometalate-Based Coordination Polymers by the Synergistic Effect of MultiProton Units.

Two novel polyoxometalate (POM)-based coordination polymers, namely, [Co(bpz)(Hbpz)][Co(SO4 )0.5 (H2 O)2 (bpz)]4 [PMo(VI) 8 Mo(V) 4 V(IV) 4 O42 ]⋅13 H2 O (NENU-530) and [Ni2 (bpz)(Hbpz)3 (H2 O)2 ][PMo(VI) 8 Mo(V) 4 V(IV) 4 O44 ]⋅8 H2 O (NENU-531) (H2 bpz=3,3',5,5'-tetramethyl-4,4'-bipyrazole), were isolated by hydrothermal methods, which represented 3D networks constructed by POM units, the protonated ligand and sulfate group. In contrast with most POM-based coordination polymers, these two compounds exhibit exceptional excellent chemical and thermal stability. More importantly, NENU-530 shows a high proton conductivity of 1.5×10(-3)  S cm(-1) at 75 °C and 98 % RH, which is one order of magnitude higher than that of NENU-531. Furthermore, structural analysis and functional measurement successfully demonstrated that the introduction of sulfate group is favorable for proton conductivity. Herein, the syntheses, crystal structures, proton conductivity, and the relationship between structure and property are presented.

Ultrastable Polymolybdate-Based Metal-Organic Frameworks as Highly Active Electrocatalysts for Hydrogen Generation from Water.

Two novel polyoxometalate (POM)-based metal-organic frameworks (MOFs), [TBA]3[ε-PMo(V)8Mo(VI)4O36(OH)4Zn4][BTB]4/3·xGuest (NENU-500, BTB = benzene tribenzoate, TBA(+) = tetrabutylammonium ion) and [TBA]3[ε-PMo(V)8Mo(VI)4O37(OH)3Zn4][BPT] (NENU-501, BPT = [1,1'-biphenyl]-3,4',5-tricarboxylate), were isolated. In these compounds, the POM fragments serving as nodes were directly connected with organic ligands giving rise to three-dimensional (3D) open frameworks. The two anionic frameworks were balanced by TBA(+) ions residing inside the open channels. They exhibit not only good stability in air but also tolerance to acidic and basic media. Furthermore, they were employed as electrocatalysts for the hydrogen evolution reaction (HER) owing to the combination of the redox activity of a POM unit and the porosity of a MOF. Meanwhile, the HER activities of ε(trim)(4/3), NENU-5, and HKUST-1 were also studied for comparison. Remarkably, as a 3D hydrogen-evolving cathode operating in acidic electrolytes, NENU-500 exhibits the highest activity among all MOF materials. It shows an onset overpotential of 180 mV and a Tafel slope of 96 mV·dec(-1), and the catalytic current density can approach 10 mA·cm(-2) at an overpotential of 237 mV. Moreover, NENU-500 and NENU-501 maintain their electrocatalytic activities after 2000 cycles.

Stable luminescent metal-organic frameworks as dual-functional materials to encapsulate ln(3+) ions for white-light emission and to detect nitroaromatic explosives.

A stable porous carbazole-based luminescent metal-organic framework, NENU-522, was successfully constructed. It is extremely stable in air and acidic/basic aqueous solutions, which provides the strategy for luminescent material encapsulation of Ln(3+) ions with tunable luminescence for application in light emission. More importantly, Ln(3+)@NENU-522 can emit white light by encapsulating different molar ratios of Eu(3+) and Tb(3+) ions. Additionally, Tb(3+)@NENU-522 is found to be useful as a fluorescent indicator for the qualitative and quantitative detection of nitroaromatic explosives with different numbers of -NO2 groups, and the concentrations of complete quenching are about 2000, 1000, and 80 ppm for nitrobenzene, 1,3-dinitrobenzene, and 2,4,6-trinitrophenol, respectively. Meanwhile, Tb(3+)@NENU-522 displays high selectivity and recyclability in the detection of nitroaromatic explosives.

Recent advances in porous polyoxometalate-based metal-organic framework materials.

Polyoxometalate (POM)-based metal-organic framework (MOF) materials contain POM units and generally generate MOF materials with open networks. POM-based MOF materials, which utilize the advantages of both POMs and MOFs, have received increasing attention, and much effort has been devoted to their preparation and relevant applications over the past few decades. They have good prospects in catalysis owing to the electronic and physical properties of POMs that are tunable by varying constituent elements. In this review, we present recent developments in porous POM-based MOF materials, including their classification, synthesis strategies, and applications, especially in the field of catalysis.

A microporous anionic metal-organic framework for sensing luminescence of lanthanide(III) ions and selective absorption of dyes by ionic exchange.

Herein, a novel anionic framework with primitive centered cubic (pcu) topology, [(CH3 )2 NH2 ]4 [(Zn4 dttz6 )Zn3 ]⋅15 DMF⋅4.5 H2 O, (IFMC-2; H3 dttz=4,5-di(1H-tetrazol-5-yl)-2H-1,2,3-triazole) was solvothermally isolated. A new example of a tetranuclear zinc cluster {Zn4 dttz6 } served as a secondary building unit in IFMC-2. Furthermore, the metal cluster was connected by Zn(II) ions to give rise to a 3D open microporous structure. The lanthanide(III)-loaded metal-organic framework (MOF) materials Ln(3+) @IFMC-2, were successfully prepared by using ion-exchange experiments owing to the anionic framework of IFMC-2. Moreover, the emission spectra of the as-prepared Ln(3+) @IFMC-2 were investigated, and the results suggested that IFMC-2 could be utilized as a potential luminescent probe toward different Ln(3+) ions. Additionally, the absorption ability of IFMC-2 toward ionic dyes was also performed. Cationic dyes can be absorbed, but not neutral and anionic dyes, thus indicating that IFMC-2 exhibits selective absorption toward cationic dyes. Furthermore, the cationic dyes can be gradually released in the presence of NaCl.

A fluorescent sensor for highly selective detection of nitroaromatic explosives based on a 2D, extremely stable, metal-organic framework.

A 2D, extremely stable, metal-organic framework (MOF), NENU-503, was successfully constructed. It displays highly selective and recyclable properties in detection of nitroaromatic explosives as a fluorescent sensor. This is the first MOF that can distinguish between nitroaromatic molecules with different numbers of NO2 groups.

2D Cd(II)-lanthanide(III) heterometallic-organic frameworks based on metalloligands for tunable luminescence and highly selective, sensitive, and recyclable detection of nitrobenzene.

In this work, five novel 2D isostructural Cd(II)-lanthanide(III) heterometallic-organic frameworks [CdCl(L)Eu(x)Tb(y)(H2O)(DMA)](NO3)·3DMA (IFMC-36-Eu(x)Tb(y): x = 1, y = 0, IFMC-36-Eu; x = 0.6, y = 0.4, IFMC-36-Eu(0.6)Tb(0.4); x = 0.5, y = 0.5, IFMC-36-Eu(0.5)Tb(0.5); x = 0.4, y = 0.6, IFMC-36-Eu(0.4)Tb(0.6); x = 0, y = 1, IFMC-36-Tb; H3L is 4,4',4″-((2,2',2″-(nitrilotris(methylene))tris(1H-benzo[d]imidazole-2,1-diyl))tris(methylene))tribenzoic acid; IFMC = Institute of Functional Material Chemistry) have been successfully synthesized by taking advantage of different molar ratios of lanthanide(III) (Ln(III)) and metalloligands under solvothermal conditions. Further luminescent measurements indicate that IFMC-36-Eu(x)Tb(y) exhibits characteristic sharp emission bands of Eu(III) and Tb(III), and the intensities of red and green can be modulated correspondingly by tuning the ratios of Eu(III) and Tb(III). Particularly, the solvent-dependent luminescent behavior of IFMC-36-Eu shows a potential application in detection of small-molecule pollutant nitrobenzene by significant fluorescence quenching. Furthermore, IFMC-36-Eu displays preeminent anti-interference ability and could be used for sensing in the systems with complicated components. This is the first time that a d-f heterometallic-organic framework can be investigated as a chemical sensor for selective, sensitive, and recyclable detection of nitrobenzene.

Ionic Liquid Modified Fe-Porphyrinic Metal-Organic Frameworks as Efficient and Selective Photocatalysts for CO2 Reduction.

Porphyrin-based metal-organic frameworks (MOFs) are ideal platforms for heterogeneous photocatalysts toward CO2 reduction. To further explore photocatalytic MOF systems, it is also necessary to consider their ability to fine-tune the microenvironments of the active sites, which affects their overall catalytic operation. Herein, a kind of ionic liquid (IL, here is 3-butyric acid-1-methyl imidazolium bromide, BAMeImBr) was anchored to iron-porphyrinic Zr-MOFs with different amounts to obtain ILx@MOF-526 (MOF-526 = Zr6O4(OH)4(FeTCBPP)3, FeTCBPP = iron 5,10,15,20-tetra[4-(4'-carboxyphenyl)phenyl]-porphyrin, x = 100, 200, and 400). ILx@MOF-526 series was designed to investigate the effects of the microenvironmental and electronic structural modification on the efficiency and selectivity of the photochemical reduction of CO2 after introducing IL fragments. Compared to parent MOF-526, the production and selectivity of CO were greatly improved in the absence of any photosensitizer under visible light by the ILx@MOF-526 series. Among them, the CO yield of IL200@MOF-526 was up to 14.0 mmol g-1 within 72 h with a remarkable CO selectivity of 97%, which is superior to that of MOF-526 without BAMeIm+ modification and other amounts of BAMeIm+ loaded. Furthermore, density functional theory calculations were performed to study the mechanism of the CO2 reduction.

Heterometallic MIL-125(Ti-Al) frameworks for electrochemical determination of ascorbic acid, dopamine and uric acid.

The detection of ascorbic acid (AA), dopamine (DA), and uric acid (UA) is not only of great significance in the areas of biomedicine and neurochemistry but also helpful in disease diagnosis and pathology research. Due to their diverse structures, designability, and large specific surface areas, metal-organic frameworks (MOFs) have recently caught considerable attention in the electrochemical field. Herein, a family of heterometallic MOFs with amino modification, MIL-125(Ti-Al)-xNH2 (x = 0%, 25%, 50%, 75%, and 100%), were synthesized and employed as electrochemical sensors for the detection of AA, DA, and UA. Among them, MIL-125(Ti-Al)-75%NH2 exhibited the most promising electrochemical behavior with 40% doping of carbon black in 0.1 M PBS (pH = 7.10), which displayed individual detection performance with wide linear detection ranges (1.0-6.5 mM for AA, 5-100 µM for DA and 5-120 µM for UA) and low limits of detection (0.215 mM for AA, 0.086 µM for DA, and 0.876 µM for UA, S/N = 3). Furthermore, the as-prepared MIL-125(Ti-Al)-75%NH2/GCE provided a promising platform for future application in real sample analysis, owing to its excellent anti-interference performance and good stability.

Self-assembly versus stepwise synthesis: heterometal-organic frameworks based on metalloligands with tunable luminescence properties.

A new family of heterometal-organic frameworks has been prepared by two synthesis strategies, in which IFMC-26 and IFMC-27 are constructed by self-assembly and IFMC-28 is obtained by stepwise synthesis based on the metalloligand (IFMC=Institute of Functional Material Chemistry). IFMC-26 is a (3,6)-connected net and IFMC-27 is a (4,8)-connected 3D framework. The metalloligands {Ni(H4 L)}(NO3 )2 are connected by binuclear lanthanide clusters giving rise to a 2D sheet structure in IFMC-28. Notably, IFMC-26-Eux Tby and IFMC-28-Eux Tby have been obtained by changing the molar ratios of raw materials. Owing to the porosity of IFMC-26, Tb(3+) @IFMC-26-Eu and Eu(3+) @IFMC-26-Tb are obtained by postencapsulating Tb(III) and Eu(III) ions into the pores, respectively. Tunable luminescence in metal-organic frameworks is achieved by the two kinds of doping methods. In particular, the quantum yields of heterometal-organic frameworks are apparently enhanced by postencapsulation of Ln(III) ions.

Adjustment of the performance and stability of isostructural zeolitic tetrazolate-imidazolate frameworks.

Presented here are two isostructural SOD-type zeolitic tetrazolate-imidazolate frameworks (ZTIFs), Zn(etz)0.86(mim)1.14 (ZTIF-9, Hetz = 5-ethyltetrazole, Hmim = 2-methylimidazole) and Zn(vtz)0.63(mim)1.37 (ZTIF-10, Hvtz = 5-vinyltetrazole). The adjustment of the ligand ratios within these ZTIFs was realized through changing the substituent groups of tetrazole ligands. Remarkably, ZTIF-9 with a suitable ligand ratio perfectly balances gas uptake and stability, exhibiting 6-fold improvement of C2H2 uptake compared to the prototype ZIF-8 (Zn(mim)2).

Metal-Organic Frameworks Based on Group 3 and 4 Metals.

Metal-organic frameworks (MOFs) based on group 3 and 4 metals are considered as the most promising MOFs for varying practical applications including water adsorption, carbon conversion, and biomedical applications. The relatively strong coordination bonds and versatile coordination modes within these MOFs endow the framework with high chemical stability, diverse structures and topologies, and interesting properties and functions. Herein, the significant progress made on this series of MOFs since 2018 is summarized and an update on the current status and future trends on the structural design of robust MOFs with high connectivity is provided. Cluster chemistry involving Y, lanthanides (Ln, from La to Lu), actinides (An, from Ac to Lr), Ti, and Zr is initially introduced. This is followed by a review of recently developed MOFs based on group 3 and 4 metals with their structures discussed based on the types of inorganic or organic building blocks. The novel properties and arising applications of these MOFs in catalysis, adsorption and separation, delivery, and sensing are highlighted. Overall, this review is expected to provide a timely summary on MOFs based on group 3 and 4 metals, which shall guide the future discovery and development of stable and functional MOFs for practical applications.

Spontaneous resolution of chiral polyoxometalate-based compounds consisting of 3D chiral inorganic skeletons assembled from different helical units.

Four enantiomerically pure 3D chiral POM-based compounds, [Ni(2)(bbi)(2)(H(2)O)(4)V(4)O(12)]2 H(2)O (1 a and 1 b) and [Co(bbi)(H(2)O)V(2)O(6)] (2 a and 2 b) (bbi=1,1'-(1,4-butanediyl)bisimidazole) based on the achiral ligand, different vanadate chains, and different metal centers have been synthesized by hydrothermal methods. Single-crystal X-ray diffraction analyses revealed that 1 a and 1 b, and 2 a and 2 b, respectively, are enantiomers. In 1 a and 1 b two kinds of vanadate chains with different screw axes link Ni cations to generate 3D chiral inorganic skeletons, which are connected by the achiral bbi ligands to form complicated 3D 3,4-connected chiral self-penetrating frameworks with (7(2)8)(7(2)8(2)9(2))(7(3)8(2)10) topology. They represent the first examples of chiral self-penetrating frameworks known for polyoxometalate (POM) systems. Contrary to 1 a and 1 b, in 2 a and 2 b the vanadate chains link Co(II) cations to generate 3D chiral inorganic skeletons, which are assembled from two kinds of heterometallic helical units of opposite chirality along the c axes. The chiral inorganic skeletons are connected by bbi to form 3D 3,4-connected chiral POM-based frameworks with (6(2)8)(2)(6(2)8(2)10(2)) topology. It is believed that the asymmetrical coordination modes of the metal cations in 1 a-2 b generate the initial chiral centers, and that the formation of the various helical units and the hydrogen bond interactions are responsible for preservation of the chirality and spontaneous resolution when the chirality is extended into the homochiral 3D-networks. This is the first known report of chiral POM-based compounds consisting of 3D chiral inorganic skeletons being obtained by spontaneous resolution upon crystallization in the absence of any chiral source, which may provide a rational strategy for synthesis of chiral POM-based compounds by using achiral ligands and POM helical units.

Self-assembly of polyoxometalate-based metal organic frameworks based on octamolybdates and copper-organic units: from Cu(II), Cu(I,II) to Cu(I) via changing organic amine.

Six polyoxometalate (POM)-based hybrid materials have been designed and synthesized based on octamolybdate building blocks and copper-organic units at different pH values under hydrothermal conditions, namely, [H2bbi][Cu(II)(bbi)2(beta-Mo8O26)] (1), [Cu(II)(bbi)2(H2O)(beta-Mo8O26)0.5] (2), [Cu(II)(bbi)2(alpha-Mo8O26)][Cu(I)(bbi)]2 (3), [Cu(II)Cu(I)(bbi)3(alpha-Mo8O26)][Cu(I)(bbi)] (4), [Cu(I)(bbi)]2[Cu(I)2(bbi)2(delta-Mo8O26)0.5][alpha-Mo8O26]0.5 (5), and [Cu(I)(bbi)][Cu(I)(bbi)(theta-Mo8O26)0.5] (6), where bbi is 1,1'-(1,4-butanediyl)bis(imidazole). Their crystal structures have been determined by X-ray diffraction. In compound 1, the bbi ligands with bis-monodentate coordination modes link Cu(II) cations to generate a 2D copper-organic unit with (4, 4) net, which is pillared by the (beta-Mo8O26)(4-) anions to form a 3D framework with alpha-Po topology. The similar copper-organic units are connected alternately by (beta-Mo8O26)(4-) anions to generate a 3D 2-fold interpenetrating (4,6)-connected framework with (4(4) x 6(2))(4(4) x 6(10) x 8) topology in compound 2. Compounds 3 and 4 are supramolecular isomers with polythreaded topology. If Cu (I)...O interactions are considered, the structure of 3 is a novel self-penetrating (3,4,6)-connected framework with (5(2) x 8)2(5(4) x 6 x 8)(4(4) x 6(10) x 10) topology, and the structure of 4 is a (4,6)-connected framework with (4(2) x 6(3) x 7)(5.6(4) x 8)(4(2) x 5(6) x 6(6) x 8)(4(2) x 5(6) x 6(4) x 7 x 8(2)) topology. Different from compounds 3 and 4, compounds 5 and 6 are supramolecular isomers with polythreaded topology based on different octamolybdate isomers. By careful inspection of the structures of 1-6, it is believed that various copper-organic units, which are formed by bbi ligands combined with Cu(II)/Cu(I) cations, octamolybdates with different types and coordination modes, and the nonbonding interactions between polyanions and copper-organic units are important for the formation of the different structures. In addition, with step by step increasing of the amount of organic amine, we have achieved the transformation of Cu(II) ions into Cu(I) ones in different degrees in POMs-based metal-organic frameworks (MOFs) for the first time. The infrared spectra, X-ray powder diffraction, and thermogravimetric analyses have been investigated in detail for all compounds, and the luminescent properties have been also been investigated for compounds 3 and 4.

Self-assembly of 2D-->2D interpenetrating coordination polymers showing polyrotaxane- and polycatenane-like motifs: influence of various ligands on topological structural diversity.

A series of mixed-ligand coordination complexes, namely, [Cd 2(bimb) 2(L (1)) 2] ( 1), [Cd(bpimb) 0.5(L (2))(H 2O)] ( 2), [Zn 5(bpib) 2(L (3)) 4(OH) 2(H 2O) 2] ( 3), [Zn(bpib) 0.5(L (4))] ( 4), and [Cd(bib)(L (4))] ( 5), where bimb = 1,4-bis((1 H-imidazol-1-yl)methyl)benzene, bpimb = 1,4-bis((2-(pyridin-2-yl)-1 H-imidazol-1-yl)methyl)benzene, bpib = 1,4-bis(2-(pyridin-2-yl)-1 H-imidazol-1-yl)butane, bib = 1,4-bis(1 H-imidazol-1-yl)butane, H 2L (1) = 4-((4-(dihydroxymethyl)phenoxy)methyl)benzoic acid, H 2L (2) = 4,4'-methylenebis(oxy)dibenzoic acid, H 2L (3) = 3,3'-methylenebis(oxy)dibenzoic acid, and H 2L (4) = 4,4'-(2,2'-oxybis(ethane-2,1-diyl)bis(oxy))dibenzoic acid, have been synthesized under hydrothermal conditions. Their structures have been determined by single-crystal X-ray diffraction analyses and further characterized by elemental analyses, IR spectra, and thermogravimetric (TG) analyses. In 1, (L (1)) (2-) anions link the metal-neutral ligand subunits to generate a 2-fold parallel interpenetrating net with the 6 (3) topology. In 2- 4, neutral ligands connect the various metal-carboxylic ligand subunits to give a 2-fold parallel interpenetrating net with (4,4) topology in 2, a 2-fold parallel interpenetrating net with (3,6)-connected topology in 3, and a 3-fold parallel interpenetrating net with (4,4) topology in 4. Compounds 1- 4 display both polyrotaxane and polycatenane characters. Compound 5 is a 5-fold parallel interpenetrating net with (4,4) topology. By careful inspection of these structures, we find that different topological structures showing both polyrotaxane and polycatenane characters have been achieved with increase of the carboxylic ligand length. It is believed that various carboxylic ligands and N-donor ligands with different coordination modes and conformations are important for the formation of the different structures. In addition, the luminescent properties of these compounds are discussed.

A stable Alq3@MOF composite for white-light emission.

A stable mesoporous blue-emitting MOF NENU-521 was successfully constructed. NENU-521 can serve as a host for encapsulating Alq3 to obtain tunable and efficient white-light emission. The Alq3@NENU-521 composite possesses excellent stability and can be used as a promising white phosphor in WLEDs.