RESUMO
Postsynthetic linker exchange (PLE) has emerged as an emerging synthetic strategy for constructing high-quality covalent organic frameworks (COFs) from preassembled entities such as linear polymers, amorphous networks, COFs, and porous organic cages by using the principles of dynamic covalent chemistry. The PLE strategy has recently been extended at the liquid-liquid interface to fabricate highly crystalline two-dimensional (2D)-COF membranes at a faster time scale (24 h). Examining the early stages of the interfacial PLE dynamics becomes essential to understanding the expedited COF growth process. In this regard, pendant drop tensiometry has been employed to probe the initial reaction dynamics of the imine cage-to-COF transformation through dynamic interfacial tension (IFT) measurements. The contrasting trends in IFT profiles between PLE-mediated (from cage) and direct COF synthesis (from parent monomers) are in qualitative agreement with the kinetics of bulk-scale interfacial polymerizations. Further, the distinct early-stage interfacial behaviors between the diverse synthetic routes have been experimentally demonstrated using tensiometry, optical microscopy, electron microscopy, and powder X-ray diffraction (PXRD) analysis. The pivotal role of in situ generated imine intermediates (ImIs) and the phenomenon of spontaneous emulsification toward accelerated interfacial COF growth process was delineated. The current study on deploying the pendant drop tensiometric technique to examine early-stage interfacial polymerization dynamics opens up a gripping avenue for mechanistic exploration in PLE-based COF synthesis. The generality of the developed methodology to study the initial COF growth kinetics was extended to a new interfacial PLE-mediated cage-to-COF transformation.
RESUMO
We present a modular single-step strategy for the formation of single and Pickering double emulsions (DEs). To this end, we consider the role of surface modification of particles and their dispersibility in different phases in the context of the design of Pickering emulsions by varying the volume fraction of oil in the oil-water mixture (Ïoil) used for emulsification. In particular, the experiments are performed by considering (a) model spherical and nonspherical colloids of different wettabilities which are tailored by oleic acid treatment, (b) immiscible liquids with or without particles, and (c) varying Ïoil from 0.1 to 0.9. We show that it is possible to affect a transition from (i) oil-in-water (O/W) emulsion to water-in-oil (W/O) emulsion and (ii) oil-in-water (O/W) to oil-in-water-in-oil (O/W/O) to water-in-oil (W/O) as Ïoil is systematically varied. We elucidate that the range of Ïoil at which particle stabilized DEs of the O/W/O type form can be tuned by engineering surface modification of particles to different extents. Furthermore, the arrangement of particles on the surface of droplets in the Pickering DEs is discussed. Our results conclusively establish that the differential wettability of particles is the key for the design of Pickering DEs. The versatility of the proposed strategy is established by developing DEs using a number of model colloidal systems.
RESUMO
Fundamental studies on the formation and stability of Pickering double emulsions are crucial for their industrial applications. Available methods of double emulsion preparation involve multiple tedious steps and can formulate a particular type of double emulsion, that is, water-in-oil-in-water (w/o/w) or oil-in-water-in-oil (o/w/o). In this work, we proposed a simple single-step in situ surface modification method to stabilize different types of double emulsions using hematite and silica particle systems which involves the addition of oleic acid. In the emulsification studies, we use (i) a combination of hematite and oleic acid, which is termed the binary system, and (ii) a mixture of hematite and silica particles together with oleic acid, which is designated as the ternary system. The wettability of hematite particles is tuned by direct or sequential addition of oleic acid to the water-decane medium. The direct surface modification (which involves the addition of a known quantity of oleic acid to the oil-water mixtures at once) of hematite particles in both binary and ternary systems shows transitional phase inversion from oil-in-water (o/w) to water-in-oil (w/o) emulsions. However, sequential surface modification results in the transition of a single emulsion to double emulsions. In the case of the binary system, the sequential surface modification of the hematite-particle-stabilized o/w emulsion can be converted into double emulsions of o/w/o type. However, in the case of the ternary system, i.e., in the presence of silica particles, sequential surface modification of hematite particles stabilizes both single (o/w) and double (w/o/w and o/w/o) emulsions. The critical concentration of oleic acid required to form a double emulsion is observed to be dependent on the ratio of the surface area of the silica particle to the total surface area of particles (S) and mixing protocols. A study of the size distribution of oil and water droplets of double emulsions shows that droplet size can be controlled by oleic acid concentration and magnitude of S. The arrangements of the particles at interfaces are visualized by SEM imaging. In this way, we developed an easy and novel single-step method of double emulsion preparation and provide a strategy to tailor the formation of different types of emulsions with a single/binary particle system by sequential in situ surface modification of the particles.
RESUMO
The efficacy of anisotropic particles in Pickering emulsion stabilization, attributed to shape-induced capillary interactions, is well-documented in the literature. In this contribution, we show that the surface of hematite ellipsoids can be modified in situ by the addition of oleic acid to effect transitional phase inversion of Pickering emulsions. Interestingly, incorporation of oleic acid results in the formation of nonspherical emulsion drops. The phase inversion of oil-in-water to water-in-oil and the transition in shape of emulsion drops from spherical to nonspherical is observed in two different particle systems, namely, nanoellipsoids and microellipsoids. The surface of spherical emulsion drops stabilized by particles or particles along with high concentration of oleic acid is found to consist of ellipsoids arranged in a close-packed configuration with their major axis parallel to the interface. In contrast, at intermediate oleic acid concentration, the surface of nonspherical emulsion drops is observed to be covered with loosely packed particle monolayer, with the ellipsoids at the oil/water interface taking up many different orientations. Using contact angle goniometry, the change in the wettability of hematite particles due to adsorption of oleic acid is established to be the mechanism responsible for the phase inversion of Pickering emulsions.
RESUMO
We demonstrate a novel yet straightforward methodology of stabilizing aqueous two-phase systems (ATPS) using oppositely charged nanoparticles (OCNPs). We employ commercial-grade, Ludox, OCNPs to induce self-assembly. This self-assembly route promotes the stronger adsorption of nanoparticles at the water-water interface by triggering the formation of 2D and 3D aggregates of varying sizes and shapes. The interplay of this size and shape promotes stability due to increased Gibbs detachment energy and modulates the resulting cluster adsorption at the interface, thereby the structural state of emulsions. We demonstrate the influence of polymers' and particles' composition on the structural transformation from droplet-bijel-droplet using a phase diagram. For the first time, such a structural transition and the single pathway are reported within the domain of ATPS to produce stable bijels or colloidal capsules. It is asserted that the essential condition of three-phase contact angle (θ) = 90° to favor the formation of bijels can be established by selecting a suitable experimental condition using a phase diagram without employing any complicated surface modification procedures reported in the literature. Further, the mechanistic route favoring the formation of bijels and emulsion droplets at different experimental regimes is presented based on the empirical study using turbidity and zeta potential measurements. These studies reveal that the formation of bijels will be most favored when the parameter M (ratio of weight fraction of positively charged nanoparticles to negatively charged nanoparticles) is chosen between 0.7 and 4. It is intriguing to note the fact that, while the droplets stabilized by OCNPs have shown good resilience under high centrifugal action, the bijels produced in this way continued to remain stable for a long time, offering a facile route to prepare the bijels with a hierarchical bicontinuous network structure.
RESUMO
A possible application of self-propelling particles is the transport of microscopic cargo. Maximizing the collection and transport efficiency of particulate matter requires the area swept by the moving particle to be as large as possible. One such particle geometry are rods propelled perpendicular to their long axis, that act as "sweepers" for collecting particles. Here we report on the required Janus coating to achieve such motion, and on the dynamics of the collection and transport of microscopic cargo by sideways propelled Janus rods.
RESUMO
In this contribution, we discuss the role of surface charge on the adsorption of shape anisotropic particles to fluid-fluid interfaces in the context of their application in particle-stabilized emulsions. Starting with a pendent aqueous drop containing nano-ellipsoids of known surface charge density suspended in an oil medium, we study the kinetics of adsorption of the ellipsoids to the water-decane interface using pendant drop tensiometry. The interfacial tension of the drop is recorded as a function of time by analyzing the shape of the drop. We show that the particles that are weakly charged readily adsorb to the water-decane interface and the adsorption behavior is influenced by the particle surface charge density. Furthermore, as the area available for the particles deposited at the interface is reduced, the interface populated with self-assembled ellipsoids shows wrinkles indicating buckling of the particle-laden interface under compression. However, the buckling is not observed if nano-ellipsoids are highly charged confirming that the particles do not adsorb to the interface when they are highly charged. This suggests that in several examples where the particles at interfaces concept is exploited, the repulsive energy barrier due to the particle surface charge plays a key role in the adsorption of particles to the interfaces. However, once the particles are adsorbed, the interfacial properties of the monolayer depend on the particle-particle interactions. Thus a combination of these interactions determines the concentration of particles at the interface, their microstructure and interfacial properties. The effect of these interactions on the quantity and size of the emulsion drops stabilized by ellipsoidal particles is also explored.
Assuntos
Alcanos/química , Emulsões/química , Compostos Férricos/química , Água/química , Adsorção , Módulo de Elasticidade , Tamanho da Partícula , Eletricidade Estática , Propriedades de Superfície , Tensão SuperficialRESUMO
The adsorption of particles to the fluid-fluid interface is a key factor for the stabilization of fluid-fluid interfaces such as those found in emulsions, foams and bijels. However, for the formation of stable particle-laden interfaces, the particles must migrate to the interface from the bulk. Recent studies show that the adsorption of particles to the interface formed during emulsification is influenced by the surface charge of the particles. To further investigate this phenomenon, we study the effect of the surface charge of the particle on the adsorption kinetics of particles to the oil-water interface. By suspending a drop of aqueous dispersion of charge stabilized nanoparticles in decane, the adsorption dynamics of particles to the decane-water interface is studied using the dynamic surface tension measurements. When the particles are highly charged (low salt), a negligible change in the interface tension is observed indicating that almost no particles are adsorbed. These results show that the charged particles experience an energy barrier when they approach the interface. But when the particle surface charge is screened by the addition of monovalent salt, a significant reduction in surface tension is observed indicating the migration and adsorption of particles to the decane-water interface. We estimate the effective diffusivity of particles to the interface by analyzing the initial decay in the measured surface tension by considering particle laden drops containing different amounts of salt using the modified Ward and Tordai theory. This effective diffusivity is used to calculate the energy barrier for the adsorption of particles to the interface. The energy barrier from the analysis of dynamic surface tension data agrees well with the concept of image charge repulsion which inhibits the adsorption of highly charged particles to the interface. By considering various types of relevant interactions, we derive an analytical expression that qualitatively captures the effect of the surface charge on the equilibrium surface coverage of particles at the drop surface.
RESUMO
A control over the nature of deposit pattern obtained after the evaporation of solvent from a sessile drop containing dispersed materials has been demonstrated to have applications in materials engineering, separation technology, printing technology, manufacture of printed circuit boards, biology, and agriculture. In this article, we report an experimental investigation of the effect of particle shape and DLVO (Derjaguin-Landau-Verwey-Overbeek) interactions on evaporation-driven pattern formation in sessile drops. The use of a model system containing monodisperse particles where particle aspect ratio and surface charge can be adjusted reveals that a control over the nature of deposit pattern can be achieved by tuning the particle-particle and particle-substrate interactions. A clear coffee-ring formation is observed when the strength of particle-particle repulsion is higher than the particle-substrate attraction. However, complete suppression of ringlike deposits leading to a uniform film is achieved when particle-substrate and particle-particle interactions are attractive. Results illustrate that for the system of submicron ellipsoids that are hydrophilic, the nature of deposit patterns obtained after evaporation depends on the nature of interactions and not on particle shape.
Assuntos
Compostos Férricos/química , Percloratos/química , Fosfatos/química , Floculação , Interações Hidrofóbicas e Hidrofílicas , Tamanho da Partícula , Propriedades de Superfície , Suspensões , Volatilização , Água/químicaRESUMO
Cracks in a colloidal film formed by evaporation induced drying can be controlled by changing drying conditions. We show, for the first time that the crack morphologies in colloidal films are dependent on shape of constituting particles apart from the microstructure and particle assembly. In order to investigate the particle shape effect on crack patterns, monodispered spherical and ellipsoidal particles are used in sessile drop experiments. On observing the dried sessile drop we found cracks along the radial direction for spherical particle dispersions and circular crack patterns for ellipsoidal particle dispersions. The change in crack pattern is a result of self assembly of shape anisotropic particles and their ordering. The ordering of particles dictate the crack direction and the cracks follow the path of least resistance to release the excess stress stored in the particle film. Ellipsoids having different aspect ratio (~3 to 7) are used and circular crack patterns are repeatedly observed in all experiments.
RESUMO
We report the effect of applied magnetic field on the morphology of cracks formed after evaporation of a colloidal suspension consisting of shape-anisotropic ellipsoidal particles on a glass substrate. The evaporation experiments are performed in sessile drop configuration, which usually leads to accumulation of particles at the drop boundaries, commonly known as the "coffee-ring effect." The coffee-ring-like deposits that accompany cracks are formed in the presence as well as in the absence of magnetic field. However, the crack patterns formed in both cases are found to differ markedly. The direction of cracks in the presence of the magnetic field is found to be governed by the orientation of particles and not solely by the magnetic field direction. Our experimental results show that at the vicinity of cracks the particles are ordered and oriented with their long-axis parallel to crack direction. In addition, we observe that the crack spacing in general increases with the height of the particulate film.
RESUMO
Liquid drops containing insoluble solutes when dried on solid substrates leave distinct ring-like deposits at the periphery or along the three-phase contact line-a phenomena popularly known as the coffee-ring or the coffee stain effect. The formation of such rings as well as their suppression is shown to have applications in particle separation and disease diagnostics. We present an experimental study of the evaporation of sessile drops containing silica rods to elucidate the structural arrangement of particles in the ring, an effect of the addition of surfactant and salt. To this end, the evaporation of aqueous sessile drops containing model rod-like silica particles of aspect ratio ranging from â¼4 to 15 on a glass slide is studied. We first show that when the conditions such as (1) solvent evaporation, (2) nonzero contact angle, (3) contact line pinning, (4) no surface tension gradient driven flow, and (5) repulsive particle-particle/particle-substrate interactions, that are necessary for the formation of the coffee-ring are met, the suspension drops containing silica rods upon evaporation leave a ring-like deposit. A closer examination of the ring deposits reveals that several layers of silica rods close to the edge of the drop are ordered such that the major axis of the rods are oriented parallel to the contact line. After the first few layers of ordered arrangement of particles, a random arrangement of particles in the drop interior is observed indicating an order-disorder transition in the ring. We monitor the evolution of the ring width and particle velocity during evaporation to elucidate the mechanism of the order-disorder transition. Moreover, when the evaporation rate is lowered, the ordering of silica rods is observed to extend over large areas. We demonstrate that the nature of the deposit can be tuned by the addition of a small quantity of surfactant or salt.