Cyclic Thiosulfinates as a Novel Class of Disulfide Cleavable Cross-Linkers for Rapid Hydrogel Synthesis.

We recently reported that cyclic thiosulfinates are cysteine selective cross-linkers that avoid the "dead-end" modifications that contribute to other cross-linkers' toxicity. In this study, we generalize the chemistry of cyclic thiosulfinates to that of thiol selective cross-linking and apply them to the synthesis of hydrogels. Thiol-functionalized four-arm poly(ethylene glycol) and hyaluronic acid monomers were cross-linked with 1,2-dithiane-1-oxide to form disulfide cross-linked hydrogels within seconds. The synthesized hydrogel could be reduced with physiological concentrations of glutathione, which modulated hydrogel mechanical properties and degradation kinetics. Bovine serum albumin protein was successfully encapsulated in hydrogel, and diffusion-mediated release was demonstrated in vitro. Hep G2 cells grew in the presence of preformed hydrogel and during hydrogel synthesis, demonstrating acceptable cytotoxicity. We encapsulated cells within a hydrogel and demonstrated cell growth and recovery up to 10 days, with and without cell adhesion peptides. In summary, we report cyclic thiosulfinates as a novel class of cross-linkers for the facile synthesis of biodegradable hydrogels.

Thiolated Thermoresponsive Polymer Scaffolds with Tunable Mucoadhesivity for Intestinal Applications.

Treatments for inflammatory bowel disease largely involve lifelong drug prescriptions or surgical intervention that can lead to poor quality of life for patients. Regenerative therapies involving stem cells have been shown to induce tissue regeneration but are limited in their efficacy by inefficient delivery mechanisms. Scaffold-based delivery of cells has been a key research focus of tissue engineers seeking to translate advances in stem cell research into clinical solutions. Biomaterial scaffolds that are delivered noninvasively to form in situ solid structures around the cells are preferable over surgically delivered monolithic scaffolds. We synthesized a novel biomaterial for in situ-forming, thermoresponsive intestinal scaffolds by thiolation of poly (N-isopropylacrylamide-co-glycidyl methacrylate) by conjugation of cysteine. Thiolation of the polymer enables chemical crosslinking with the intestinal mucus, enhancing mucoadhesion and permitting control of scaffold retention time in the intestinal environment. This study reports the synthesis and characterization of the thiolated polymer and investigates its crosslinking behavior, mucoadhesive properties, and cytocompatibility for potential tissue engineering applications in the intestine.

Free Epoxide Content Mediates Encapsulated Cell Viability and Activity through Protein Interactions in a Thermoresponsive, In Situ Forming Hydrogel.

The development of synthetic and well-defined extracellular matrices that are free of xenogeneic components and are capable of inducing desired cellular responses holds great potential for use in vitro as 3D cell culture environments and in vivo as scaffolds for tissue regeneration. In this study, the impact of free and partially occupied epoxide groups on the viability, activity, and behavior of rat fibroblasts encapsulated in thermoresponsive hydrogels based on poly(N-isopropylacrylamide) (pNiPAAm) was investigated. While fibroblasts encapsulated in neat pNiPAAm remained rounded and showed significant toxicity by 5 days, those encapsulated in the epoxide-modified thermogels demonstrated not only high viability but also an ability to proliferate, attach, produce extracellular matrix (ECM) components, and cluster. The results demonstrated that the presence of free epoxide groups led to the local conjugation of available proteins to produce a modified structure in situ, which supported cell viability, activity, and cluster formation within the hydrogel.

Synthesis, physicochemical characterization, and cytocompatibility of bioresorbable, dual-gelling injectable hydrogels.

Injectable, dual-gelling hydrogels were successfully developed through the combination of physical thermogellation at 37 °C and favorable amine:epoxy chemical cross-linking. Poly(N-isopropylacrylamide)-based thermogelling macromers with a hydrolyzable lactone ring and epoxy pendant groups and a biodegradable diamine-functionalized polyamidoamine cross-linker were synthesized, characterized, and combined to produce nonsyneresing and bioresorbable hydrogels. Differential scanning calorimetry and oscillatory rheometry demonstrated the rapid and dual-gelling nature of the hydrogel formation. The postgelation dimensional stability, swelling, and mechanical behavior of the hydrogel system were shown to be easily tuned in the synthesis and formulation stages. The leachable products were found to be cytocompatible under all conditions, while the degradation products demonstrated a dose- and time-dependent response due to solution osmolality. Preliminary encapsulation studies showed mesenchymal stem cell viability could be maintained for 7 days. The results suggest that injectable and thermally and chemically cross-linkable hydrogels are promising alternatives to prefabricated biomaterials for tissue engineering applications, particularly for cell delivery.

Characterizing influence of rCHOP treatment on diffuse large B-cell lymphoma microenvironment through in vitro microfluidic spheroid model.

For over two decades, Rituximab and CHOP combination treatment (rCHOP) has remained the standard treatment approach for diffuse large B-cell lymphoma (DLBCL). Despite numerous clinical trials exploring treatment alternatives, few options have shown any promise at further improving patient survival and recovery rates. A wave of new therapeutic approaches have recently been in development with the rise of immunotherapy for cancer, however, the cost of clinical trials is prohibitive of testing all promising approaches. Improved methods of early drug screening are essential for expediting the development of the therapeutic approaches most likely to help patients. Microfluidic devices provide a powerful tool for drug testing with enhanced biological relevance, along with multi-parameter data outputs. Here, we describe a hydrogel spheroid-based microfluidic model for screening lymphoma treatments. We utilized primary patient DLBCL cells in combination with NK cells and rCHOP treatment to determine the biological relevance of this approach. We observed cellular viability in response to treatment, rheological properties, and cell surface marker expression levels correlated well with expected in vivo characteristics. In addition, we explored secretory and transcriptomic changes in response to treatment. Our results showed complex changes in phenotype and transcriptomic response to treatment stimuli, including numerous metabolic and immunogenic changes. These findings support this model as an optimal platform for the comparative screening of novel treatments.

Synthesis and characterization of thermally and chemically gelling injectable hydrogels for tissue engineering.

Novel, injectable hydrogels were developed that solidify through a physical and chemical dual-gelation mechanism upon preparation and elevation of temperature to 37 °C. A thermogelling, poly(N-isopropylacrylamide)-based macromer with pendant epoxy rings and a hydrolytically degradable polyamidoamine-based diamine cross-linker were synthesized, characterized, and combined to produce in situ forming hydrogel constructs. Network formation through the epoxy-amine reaction was shown to be rapid and facile, and the progressive incorporation of the hydrophilic polyamidoamine cross-linker into the hydrogel was shown to mitigate the often problematic tendency of thermogelling materials to undergo significant postformation gel syneresis. The results suggest that this novel class of injectable hydrogels may be attractive substrates for tissue engineering applications due to the synthetic versatility of the component materials and beneficial hydrogel gelation kinetics and stability.

Structure-property evaluation of thermally and chemically gelling injectable hydrogels for tissue engineering.

The impact of synthesis and solution formulation parameters on the swelling and mechanical properties of a novel class of thermally and chemically gelling hydrogels combining poly(N-isopropylacrylamide)-based thermogelling macromers containing pendant epoxy rings with polyamidoamine-based hydrophilic and degradable diamine cross-linking macromers was evaluated. Through variation of network hydrophilicity and capacity for chain rearrangement, the often problematic tendency of thermogelling hydrogels to undergo significant syneresis was addressed. The demonstrated ability to tune postformation dimensional stability easily at both the synthesis and formulation stages represents a significant novel contribution toward efforts to utilize poly(N-isopropylacrylamide)-based polymers as injectable biomaterials. Furthermore, the cytocompatibility of the hydrogel system under relevant conditions was established while demonstrating time- and dose-dependent cytotoxicity at high solution osmolality. Such injectable in situ forming degradable hydrogels with tunable water content are promising candidates for many tissue-engineering applications, particularly for cell delivery to promote rapid tissue regeneration in non-load-bearing defects.

Detection of presymptomatic Alzheimer's disease through breath biomarkers.

INTRODUCTION: Novel sensors were developed to detect exhaled volatile organic compounds to aid in the diagnosis of mild cognitive impairment associated with early stage Alzheimer's disease (AD). The sensors were sensitive to a rat model that combined the human apolipoprotein E (APOE)4 gene with aging and the Western diet. METHODS: Gas sensors fabricated from molecularly imprinted polymer-graphene were engineered to react with alkanes and small fatty acids associated with lipid peroxidation. With a detection sensitivity in parts per trillion the sensors were tested against the breath of wild-type and APOE4 male rats. Resting state BOLD functional connectivity was used to assess hippocampal function. RESULTS: Only APOE4 rats, and not wild-type controls, tested positive to several small hydrocarbons and presented with reduced functional coupling in hippocampal circuitry. DISCUSSION: These results are proof-of-concept toward the development of sensors that can be used as breath detectors in the diagnosis, prognosis, and treatment of presymptomatic AD.

Spray Delivery of Intestinal Organoids to Reconstitute Epithelium on Decellularized Native Extracellular Matrix.

The native extracellular matrix (ECM) serves as a unique platform for tissue engineering because it provides an organ-specific scaffold in terms of both matrix composition and tissue architecture. However, efficacious cell-seeding techniques for recellularizing the ECM constructs with appropriate cell types to restore biological function remain under development. In this study, the impact of spraying as a seeding technique for repopulation of decellularized small intestine was investigated. In a series of experiments, CaCo-2 cells were first used to investigate the effect of spray device type and pressure on cell viability and to optimize parameters for seeding intestinal epithelial cells. High cell viability and a homogeneous cell distribution were obtained when cell suspensions were sprayed through an airbrush at low pressure. Next, the effect of seeding method and spray pressure on the size and dispersal of intestinal organoids, a more complex and clinically relevant intestinal stem cell population, was evaluated. The feasibility of seeding intestinal epithelial cells onto decellularized scaffolds was next studied using sprayed CaCo-2 cells, which survived the spray-seeding process and formed a monolayer on the scaffold. Finally, airbrush seeding was used to spray intestinal organoids onto the scaffolds, with cell survival and tissue architecture evaluated after 1 week of culture. Organoids seeded through pipetting onto the decellularized scaffold survived, but demonstrated aggregation, with cells organized around multiple small lumens. In contrast, organoids airbrush spray seeded at 0.35 bar onto the decellularized scaffold not only engrafted but also demonstrated formation of an epithelial monolayer that resembled the absorptive surface found on intestinal villi. The results suggest that seeding cells through airbrush spraying holds great potential for use in tissue engineering, especially for large-scale tubular organ recellularization.

Extraction of hyperoside and quercitrin from mimosa (Albizia julibrissin) foliage.

Mimosa, an excellent energy crop candidate because of its high growth yield, also contains, on a dry basis, 0.83% hyperoside and 0.90% quercitrin. Hyperoside has been documented as having anti-inflammatory and diurectic properties, whereas quercitrin may play a role in intestinal repair following chronic mucosal injury. Thus, mimosa might first be extracted for important antioxidant compounds and then used as a feedstock for energy production. This article presents results from studies aimed at determining the effect of three extraction parameters (temperature, solvent composition, and time) on the yield of these important quercetin compounds. Conditions are sought which maximize yield and concentration, whereas complementing subsequent biomass pretreatment, hydrolysis and fermentation.

In situ spray deposition of cell-loaded, thermally and chemically gelling hydrogel coatings for tissue regeneration.

In this study, the efficacy of creating cellular hydrogel coatings on warm tissue surfaces through the minimally invasive, sprayable delivery of thermoresponsive liquid solutions was investigated. Poly(N-isopropylacrylamide)-based (pNiPAAm) thermogelling macromers with or without addition of crosslinking polyamidoamine (PAMAM) macromers were synthesized and used to produce in situ forming thermally and chemically gelling hydrogel systems. The effect of solution and process parameters on hydrogel physical properties and morphology was evaluated and compared to poly(ethylene glycol) and injection controls. Smooth, fast, and conformal hydrogel coatings were obtained when pNiPAAm thermogelling macromers were sprayed with high PAMAM concentration at low pressure. Cellular hydrogel coatings were further fabricated by different spraying techniques: single-stream, layer-by-layer, and dual stream methods. The impact of spray technique, solution formulation, pressure, and spray solution viscosity on the viability of fibroblast and osteoblast cells encapsulated in hydrogels was elucidated. In particular, the early formation of chemically crosslinked micronetworks during bulk liquid flow was shown to significantly affect cell viability under turbulent conditions compared to injectable controls. The results demonstrated that sprayable, in situ forming hydrogels capable of delivering cell populations in a homogeneous therapeutic coating on diseased tissue surfaces offer promise as novel therapies for applications in regenerative medicine. © 2016 Wiley Periodicals, Inc. J Biomed Mater Res Part A: 104A: 2383-2393, 2016.

In vitro and in vivo evaluation of self-mineralization and biocompatibility of injectable, dual-gelling hydrogels for bone tissue engineering.

In this study, we investigated the mineralization capacity and biocompatibility of injectable, dual-gelling hydrogels in a rat cranial defect as a function of hydrogel hydrophobicity from either the copolymerization of a hydrolyzable lactone ring or the hydrogel polymer content. The hydrogel system comprised a poly(N-isopropylacrylamide)-based thermogelling macromer (TGM) and a polyamidoamine crosslinker. The thermogelling macromer was copolymerized with (TGM/DBA) or without (TGM) a dimethyl-γ-butyrolactone acrylate (DBA)-containing lactone ring that modulated the lower critical solution temperature and thus, the hydrogel hydrophobicity, over time. Three hydrogel groups were examined: (1) 15wt.% TGM, (2) 15wt.% TGM/DBA, and (3) 20wt.% TGM/DBA. The hydrogels were implanted within an 8mm critical size rat cranial defect for 4 and 12weeks. Implants were harvested at each timepoint and analyzed for bone formation, hydrogel mineralization and tissue response using microcomputed tomography (microCT). Histology and fibrous capsule scoring showed a light inflammatory response at 4weeks that was mitigated by 12weeks for all groups. MicroCT scoring and bone volume quantification demonstrated a similar bone formation at 4weeks that was significantly increased for the more hydrophobic hydrogel formulations - 15wt.% TGM and 20wt.% TGM/DBA - from 4weeks to 12weeks. A complementary in vitro acellular mineralization study revealed that the hydrogels exhibited calcium binding properties in the presence of serum-containing media, which was modulated by the hydrogel hydrophobicity. The tailored mineralization capacity of these injectable, dual-gelling hydrogels with hydrolysis-dependent hydrophobicity presents an exciting property for their use in bone tissue engineering applications.

Mesenchymal stem cell and gelatin microparticle encapsulation in thermally and chemically gelling injectable hydrogels for tissue engineering.

In this work, we investigated the viability and osteogenic differentiation of mesenchymal stem cells encapsulated with gelatin microparticles (GMPs) in an injectable, chemically and thermally gelling hydrogel system combining poly(N-isopropylacrylamide)-based thermogelling macromers containing pendant epoxy rings with polyamidoamine-based hydrophilic and degradable diamine crosslinking macromers. Specifically, we studied how the parameters of GMP size and loading ratio affected the viability and differentiation of cells encapsulated within the hydrogel. We also examined the effects of cell and GMP co-encapsulation on hydrogel mineralization. Cells demonstrated long-term viability within the hydrogels, which was shown to depend on GMP size and loading ratio. In particular, increased interaction of cells and GMPs through greater available GMP surface area, use of an epoxy-based chemical gelation mechanism, and the tunable high water content of the thermogelled hydrogels led to favorable long-term cell viability. Compared with cellular hydrogels without GMPs, hydrogels co-encapsulating cells and GMPs demonstrated greater production of alkaline phosphatase by cells at all time-points and a transient early enhancement of hydrogel mineralization for larger GMPs at higher loading ratios. Such injectable, in situ forming hydrogels capable of delivering and maintaining populations of encapsulated mesenchymal stem cells and promoting mineralization in vitro offer promise as novel therapies for applications in tissue engineering and regenerative medicine.

Perspectives on the interface of drug delivery and tissue engineering.

Controlled drug delivery of bioactive molecules continues to be an essential component of engineering strategies for tissue defect repair. This article surveys the current challenges associated with trying to regenerate complex tissues utilizing drug delivery and gives perspectives on the development of translational tissue engineering therapies which promote spatiotemporal cell-signaling cascades to maximize the rate and quality of repair.