Optical Properties of Cationic Perylenediimide Nanowires in Aqueous Medium: Experimental and Computational Studies.

Cationic perylenediimide derivative, namely N,N'-di(2-(trimethylammoniumiodide)ethylene) perylenediimide (TAIPDI), has been synthesized and characterized in an aqueous medium by using dynamic light scattering (DLS), X-ray diffraction (XRD), fourier-transform infrared (FTIR), scanning electron microscope (SEM), and high-resolution transmission electron microscopy (HRTEM) techniques. The optical absorption and fluorescence spectra of TAIPDI revealed the formation of aggregated TAIPDI nanowires in water, but not in organic solvents. In order to control the aggregation behavior, the optical properties of TAIPDI have been examined in different aqueous media, namely cetyltrimethylammonium bromide (CTAB), and sodium dodecyl sulfate (SDS). Furthermore, the utilization of the examined TAIPDI for constructing supramolecular donor-acceptor dyad has been achieved by combining the electron accepting TAIPDI with the electron donating 4,4'-bis (2-sulfostyryl)-biphenyl disodium salt (BSSBP). The formed supramolecular dyad TAIPDI-BSSBP through the ionic and electrostatic π-π interactions have been well examined by various spectroscopic techniques, e.g., steady-state absorption and fluorescence, cyclic voltammetry, and time-correlated single-photon counting (TCSPC), and first principle computational chemistry methods. Experimental results suggested the occurring of intra-supramolecular electron transfer from BSSBP to TAIPDI with rate constant and efficiency of 4.76 × 109 s-1 and 0.95, respectively. The ease of construction, absorption in the UV-Visible region, and fast electron transfer process render the supramolecular TAIPDI-BSSBP complex as a donor-acceptor material for optoelectronic devices.

Intermediate-term oncological and functional outcomes of salvage cryotherapy for the management of prostate cancer recurrence after primary brachytherapy versus primary cryotherapy: A propensity score-matched analysis.

BACKGROUND: Salvage cryotherapy (SCT) is widely used to treat prostate cancer (PCa) recurrence after radiotherapy (RT). We studied the intermediate oncological and functional outcomes of patients who underwent SCT following cryotherapy (CRYO-SCT) recurrence and compare it to recurrence after brachytherapy (BT-SCT). METHODS: An IRB-approved retrospective cohort study utilizing patient data from the Cryo On-Line Data Registry and the Duke PCa database between 1992 and 2016. Biochemical recurrence (BCR) using Phoenix criteria was the primary endpoint assessed at 2- and 5-years post-SCT. Secondary endpoints assessed functional outcomes including urinary continence, erectile function, and recto-urethral fistula. Association between treatment and biochemical progression-free survival was assessed using inverse probability weighted (IPTW) Cox proportional hazards regression. The differences in the secondary functional outcomes were assessed by Pearson's χ2 test or Fisher's exact test, corrected for IPTW. RESULTS: A total of 194 patients met inclusion criteria. The BCR rate for BT-SCT and CRYO-SCT was 23 (20.4%) and 17 (21%) at 2 years and 30 (26.5%) and 22 (27.2%) at 5 years according to Phoenix criteria. There was no statistical difference in 2 years (hazard ratio [HR] 0.9; 95% confidence interval [CI], 0.5-1.7, p = 0.7) or 5-year BCR (HR: 0.86; 95% CI, 0.5-1.5, p = 0.6) between the groups. The functional outcomes like urinary continence (p = 0.4), erectile function (p = 0.1), and recto-urethral fistula (p = 0.3) were not statistically different. CONCLUSION: CRYO-SCT appears to be well tolerated, with comparable oncological and functional outcomes to patients failing primary BT. The findings also demonstrated that SCT can render a significant number of patients biochemically free of disease after initial CRYO with minimal morbidity. SCT is a viable treatment option to salvage local PCa recurrence following either BT or cryoablation failure.

Co-sensitization of the HD-2 complex with low-cost cyanoacetanilides for highly efficient DSSCs.

The photophysical and electrochemical properties of new targeted 2-cyanoacetanilide-based dyes are illustrated. New cyanoacetanilides SA7-10 were synthesized and employed as co-sensitizers in DSSCs. The chemical structures of these 2-cyanoacetanilides differ according to the substituent at the benzene ring (-H, -Me, -OMe and -NEt2), with the anchoring moiety being the same, a -COOH group. Furthermore, a density functional theory (DFT) calculation has shown an effective intermolecular charge transfer character, the HOMOs of SA7-10 are mainly located on the corresponding donor part, and their LUMOs are located on carboxylic acid moieties as the acceptor. Interestingly, using photosensitizers SA7-10 as co-sensitizers with HD-2 dye causes an improvement in their photovoltaic performances. Among the dyes, SA10 co-sensitized with HD-2 displayed an overall efficiency of 8.25%, a JSC of 19.5 mA cm-2, a VOC of 0.65 V and an FF of 64.35 compared to 7.46%, 19 mA cm-2, 0.64 V and 60.54, respectively, of HD-2 only. Moreover, the electrochemical impedance spectroscopy (EIS) data of SA7-10 and HD-2 were found to be in accordance with the obtained photovoltaic parameters. Finally, the results indicated that 2-cyanoacetanilide-based dyes were utilized as promising co-sensitizers due to their easy preparation methods and their relatively small size.

Simple thiophene-bridged D-π-A type chromophores for DSSCs: a comprehensive study of their sensitization and co-sensitization properties.

Herein, we report the design and synthesis of four new thiophene-bridged D-π-A configured organic dyes T1-4 comprising different donors, π-spacers and anchoring units, as potential sensitizers and co-sensitizers for DSSCs. The current work also highlights their structural, photophysical, thermal, electrochemical, theoretical, and photoelectrochemical studies, including evaluation of their structure-property relationships. The optical results revealed that the dyes T1-4 display λabs and λemi in the range of 402-461 nm and 556-575 nm, respectively, with a bandgap in the order of 2.31-2.58 eV. Furthermore, the results showed that the dyes possess all the pre-requisites to act as sensitizers/co-sensitizers. Among the tested dyes, the device based on sensitizer T2 achieved the highest PCE compared to the other three dyes, under the standard conditions. Furthermore, their co-sensitized devices were fabricated by co-adsorbing them with the well-known Ru-based MH-12 sensitizer and interestingly the co-sensitizer T3 carrying an alkoxy group and a barbituric acid anchor displayed the highest PCE of 8.79%, which is much higher than that of MH-12 alone (8.18%). Conclusively, the study furnishes a deeper understanding of the intricacies involved in the structural modification of sensitizers/co-sensitizers in achieving an enhanced performance of the devices.

Simple diphenylamine based D-π-A type sensitizers/co-sensitizers for DSSCs: a comprehensive study on the impact of anchoring groups.

Herein, we report the design, synthesis and characterization of a new series of simple donor-π spacer-acceptor/anchor (D-π-A) type diphenylamine based metal-free organic dyes possessing three different anchoring groups, viz. 4-aminobenzoic acid (DTP), 2-(4-nitrophenyl)acetonitrile (DTN), and barbituric acid (DTB), connected with 2-(thiophene-2-yl)-acetonitrile, as effective sensitizers and co-sensitizers in Dye Sensitized Solar Cells (DSSCs). They were subjected to photophysical, electrochemical and theoretical studies. The dyes exhibited characteristic λabs and λemi in the range of 445-485 and 545-570 nm, respectively. Both optical and electrochemical band gaps were found to be in the range of 2.2 to 2.35 eV. The driving forces for injection (ΔGinj), recombination (ΔGrec) and regeneration (ΔGreg) processes were evaluated to understand their feasibility. Finally, the DSSC devices were fabricated employing the new dyes as sensitizers as well as co-sensitizers along with the Ru(ii) based N3 dye. Interestingly, DTP carrying 4-aminobenzoic acid as the anchoring group shows the best photoelectrochemical performance, viz. photovoltaic conversion efficiency (PCE) = 4.4%, open circuit potential (VOC) = 0.577 V, and short-circuit current density (JSC) = 9.06 mA cm-2 with a broad incident photon conversion efficiency (IPCE) spectrum. Co-sensitization of the dyes brought about enhanced VOC values, compared to the N3 dye alone. Finally, different interface resistance values obtained from the electrochemical impedance spectroscopy (EIS) circuit fitting were used to study the fundamental processes of energy conversion.

Desalination using modified configuration of supported liquid membrane with enhancement of mass transfer of NaCl.

Supported liquid membranes (SLM) suffer from very slow mass transfer of the solute from the donor phase (DP) to the receptor phase (RP) through the liquid membrane (LM). In the present work, an attempt was made to accelerate the mass transfer in SLM by creating a modified configuration in which the DP and RP are made to flow either co- or counter-currently to each other. Variables, which could affect the removal of NaCl, were the volume ratio of DP to RP, type and quantity of sequestering agent (SA), presence of mobile carrier (MC), type of LM, and flow rate of DP and RP. The results showed that the higher the flow rate of DP and RP, the higher the mass transfer of NaCl. Quantity and type of SA and type of LM were prime important factors. Remarkably, the time required for transfer of NaCl from DP to RP was reduced from several hours in the case of stagnant SLM to several minutes in the present work. The mass transfer of NaCl was analysed based on kinetic laws of two consecutive irreversible first-order reactions. The values achieved establish the process is diffusion controlled, and the membrane entrance rate constants increase directly with initial concentration (Ci) and inversely with quantity of SA.

New di-anchoring A-π-D-π-A configured organic chromophores for DSSC application: sensitization and co-sensitization studies.

Herein, we report the design and synthesis of three new un-symmetrical metal-free carbazole based organic dyes, E1-3 with A-π-D-π-A architecture, as effective di-anchoring sensitizers in DSSCs. The new entities comprise carbazole as a donor scaffold connected to three different units, viz. cyano acetic acid, 2,4-thiazolidinedione and barbituric acid as acceptor/anchoring units via vinylene and phenylene as π-spacers at 3- and 6-positions of the carbazole ring, respectively. Photophysical, electrochemical and theoretical studies were carried out in order to assess their feasibility as active sensitizers. Furthermore, their photoelectrochemical performances and charge transport properties in fabricated DSSCs were evaluated. The results revealed that the device fabricated with the E1 sensitizer displayed the highest PCE of 2.38% among the three dyes. Its JSC, VOC, and IPCE values were found to be 6.36 mA cm-2, 0.599 V, and 57%, respectively. Its enhanced performance is attributed to the presence of a highly electron withdrawing cyano acetic acid unit on either side of the carbazole core through appropriate π-spacers. Interestingly, the DFT study indicated that the electron cloud of the LUMO level has been shifted significantly towards the 2-cyano phenyl acrylic acid connected at the 6th position of the carbazole ring, when compared to the cyano acrylic acid linked at position 3, confirming efficient charge separation in E1. The assigned lifetimes of E1-3 obtained from EIS studies were found to be in accordance with experimentally obtained photovoltaic parameters. Furthermore, E1-3, when co-sensitized with NCSU-10 sensitizer in DSSCs, displayed higher VOC values, but lower PCE values than that of NCSU-10.

Correction: New di-anchoring A-π-D-π-A configured organic chromophores for DSSC application: sensitization and co-sensitization studies.

Correction for 'New di-anchoring A-π-D-π-A configured organic chromophores for DSSC application: sensitization and co-sensitization studies' by Praveen Naik et al., Photochem. Photobiol. Sci., 2018, DOI: 10.1039/c7pp00351j.

Monoclonal antibodies for chronic pain: a practical review of mechanisms and clinical applications.

Context: Monoclonal antibodies are being investigated for chronic pain to overcome the shortcomings of current treatment options. Objective: To provide a practical overview of monoclonal antibodies in clinical development for use in chronic pain conditions, with a focus on mechanisms of action and relevance to specific classes. Methods: Qualitative review using a systematic strategy to search for randomized controlled trials, systematic and nonsystematic (narrative) reviews, observational studies, nonclinical studies, and case reports for inclusion. Studies were identified via relevant search terms using an electronic search of MEDLINE via PubMed (1990 to June 2017) in addition to hand-searching reference lists of retrieved systematic and nonsystematic reviews. Results: Monoclonal antibodies targeting nerve growth factor, calcitonin gene-related peptide pathways, various ion channels, tumor necrosis factor-α, and epidermal growth factor receptor are in different stages of development. Mechanisms of action are dependent on specific signaling pathways, which commonly involve those related to peripheral neurogenic inflammation. In clinical studies, there has been a mixed response to different monoclonal antibodies in several chronic pain conditions, including migraine, neuropathic pain conditions (e.g., diabetic peripheral neuropathy), osteoarthritis, chronic back pain, ankylosing spondylitis, and cancer. Adverse events observed to date have generally been mild, although further studies are needed to ensure safety of monoclonal antibodies in early stages of development, especially where there is an overlap with non-pain-related pathways. High acquisition cost remains another treatment limitation. Conclusion: Monoclonal antibodies for chronic pain have the potential to overcome the limitations of current treatment options, but strategies to ensure their appropriate use need to be determined.

A comparative study of the influence of N,N'-dialkyl vs. N,N'-diaryl-based electron donor ancillary ligands on photocurrent and photovoltage in dye-sensitized solar cells (DSSCs).

In this study, we report the synthesis of a novel heteroleptic Ru(ii)-sensitizer, (Ru(2,2'-bipyridine-4,4'-dicarboxylic acid)-4,4'-bis(4-piperidin-1-yl)phenyl ethenyl)-(2,2'-bipyridine) (NCS)2, denoted as SD-1; moreover, its photophysical, electrochemical, and photovoltaic performances were compared with those of N719 and K77-7 (N,N'-diaryl Ru-sensitizer, namely Ru(2,2'-bipyridine-4,4'-dicarboxylic-acid)-4,4'-bis(2-(4-N,N'-diphenylaminophenyl)ethenyl)-2,2'-bipyridine (NCS)2). The photovoltaic performance of SD-1 outperformed those of N-719 and K77-7, particularly in the red region, and the overall efficiency of SD-1 was 8.5% as compared to 8.0% of K77-7 and 7.7% of N719 under the same experimental device conditions. The superior light harvesting efficiency of SD-1 can be attributed to the strong electron donor sp3-nitrogen, which is attached to two sp3-carbons (dialkyl), whereas in the case of K77-7, all carbon atoms attached to the sp3-nitrogen are sp2, which decrease the electron density on the latter and minimize the electron-donating power of the ancillary ligand in K77-7. To gain a quantitative understanding of the electron density on nitrogen in SD-1 and K77-7, first-principle calculations using molecular and thermodynamic descriptors, such as frontier molecular orbitals, ground-state oxidation potential (GSOP), excited-state oxidation potential (ESOP), optical gap (E0-0), and charge distributions, were conducted in solution. In addition, for understanding the anchored structures of dyes on Ti24O48, density functional theory (DFT) and time-dependent density functional theory (TD-DFT) were utilized. Results of computational studies are in excellent agreement with the experimental results, which can be used as a screening tool for the design of more efficient molecular motifs for DSSCs.

Functional Impairment and Painful Physical Symptoms in Patients with Major Depressive Disorder Treated with Antidepressants: Real-World Evidence from the Middle East.

BACKGROUND: The Global Burden of Disease 2010 study reported the relative size of major depressive disorder (MDD) burden to be greater in the Middle East and North Africa than anywhere else. However, little research has been carried out to examine the comparative effectiveness of antidepressants in this region. OBJECTIVE: To assess and compare functioning levels in Middle Eastern patients with MDD treated with either duloxetine or a selective serotonin reuptake inhibitor (SSRI), and to examine the impacts of depression-related pain on functioning by the type of treatment. METHOD: This post-hoc analysis, which focused on Middle Eastern patients, used data from a 6-month prospective observational study that included 1,549 MDD patients without sexual dysfunction. Levels of functional impairment and depression-related pain were assessed using the Sheehan Disability Scale (SDS) and the modified Somatic Symptom Inventory, respectively. A mixed model with repeated measures (MMRM) was employed. RESULTS: The mean age of the patients was 37.3 (SD=8.4) years, and 34.6% were female. Patient functioning was, on average, moderately impaired at baseline, but improved substantially during follow-up in both the duloxetine (n=152) and the SSRI (n=123) cohorts. The MMRM results showed a lower level of functional impairment at 24 weeks in the duloxetine cohort than in the SSRI cohort (p<0.001). Pain severity at baseline was positively associated with functional impairment during follow-up only in the SSRI cohort (p=0.003). CONCLUSION: Duloxetine-treated MDD patients achieved better functioning than SSRI-treated patients. This treatment difference was partly driven by depression-related pain.

A femtosecond study of the anomaly in electron injection for dye-sensitized solar cells: the influence of isomerization employing Ru(II) sensitizers with anthracene and phenanthrene ancillary ligands.

In this study, an intriguing difference caused by structural isomerization based on anthracene and phenanthrene stilbazole type ancillary ligands in Ru(ii) sensitizers for dye sensitized solar cells (DSCs) has been investigated using femtosecond transient absorption spectroscopy. Both anthracene and phenanthrene based sensitizers HD-7 and HD-8, respectively, resulted in a similar extinction coefficient, photophysical and thermodynamic free energy of electron injection and dye regeneration as measured by UV-Vis, excited state lifetime and cyclic voltammetry measurements, respectively. However, TiO2 adsorbed HD-7 resulted in up to 45% less photocurrent density than HD-8 although photovoltage was similar owing to comparable thermodynamic characteristics. It was obvious from the measurement of incident photon to current conversion efficiency (IPCE) that excited electrons in HD-7 are prone to internal energy loss before injection into the TiO2 conduction band. Analysis of photo-induced spectral features measured by femtosecond transient absorption spectroscopy showed that excited electrons in HD-7 are prone to ISC (intersystem crossing) much more than HD-8 and those triplet electrons are not injected into TiO2 efficiently. Interestingly, from impedance measurements, HD-7 showed higher recombination resistance than HD-8 and N719, but a shorter lifetime for electrons injected into the TiO2 conduction band.

Desalination of simulated seawater by purge-air pervaporation using an innovative fabricated membrane.

An innovative polymeric membrane has been invented, which presents a breakthrough in the field of desalination membranes. It can desalinate simulated seawater of exceptionally high concentration to produce a high flux of potable water with over 99.7% salt rejection (%SR) in a once-through purge-air pervaporation (PV) process. A set-up was constructed for conducting the desalination experiments and the effect of initial salt solution concentration (Ci) and pervaporation temperature (Tpv) on the water flux (J), %SR, separation factor, and pervaporation separation index were determined. The membrane was prepared by the phase-inversion technique, of a specially formulated casting solution consisting of five ingredients, after which the membrane was subjected to a post-treatment by which certain properties were conferred. The results confirmed that the salinity of the pervaporate was independent of Ci (all %SR above 99.7). The best result was at Tpv=70 °C, where J varied from 5.97 to 3.45 l/m2 h for Ci=40-140 g NaCl/l, respectively. The membrane morphology was confirmed to be asymmetric. The contact angle was immeasurable, indicating the membrane to be super-hydrophilic. Activation energies computed using Arrhenius law were, under all conditions investigated, less than 20 kJ/mol K.

A comparative study of Ru(II) cyclometallated complexes versus thiocyanated heteroleptic complexes: thermodynamic force for efficient dye regeneration in dye-sensitized solar cells and how low could it be?

Four novel Ru(II) bipyridyl complexes MH12­15 were synthesized and characterized for dye-sensitized solar cells (DSSCs). Their photovoltaic performance including incident photon-to-current conversion efficiency (IPCE), total solar-to-power conversion efficiency (η%) and ground and excited state oxidation potentials and photoelectrochemical properties were evaluated on mesoporous nanocrystalline TiO2 and compared with the benchmark N719-dye under the same experimental conditions. MH12­15 showed stronger MLCT with significantly higher molar extinction coefficient for the lower energy absorption bands at 553 nm (27,500 M(−1) cm(−1)), 554 nm (34,605 M(−1) cm(−1)), 577 nm (23,300 M(−1) cm(−1)), and 582 nm (39,000 M(−1) cm(−1)), respectively, than that of N719 (14,200 M(−1) cm(−1)). The introduction of a cyclometallated ligand in dyes MH14 and 15 improved the optical properties and red-shifts of 24 nm and 28 nm, respectively, compared to the non-cyclometallated analogs MH12 and 13. The red shift in the UV-Vis spectra of MH14 and 15 can be attributed to the destabilization of the HOMO t2g of Ru(II). However, the destabilization of the HOMO furnished an upward shift of the ground state oxidation potentials (GSOPs) of MH14 and 15 at −5.44 eV and −5.36 eV against vacuum, respectively, which resulted in a driving force of only 0.22 and 0.16 eV for regeneration of dyes MH14 and 15, respectively. In the case of NCS analogs, MH12 and 13, the GSOPs, however, were −5.56 and −5.51 eV, respectively, which produced a driving force of more than 0.25 eV for dye regeneration. The nanosecond transient absorbance measurements showed that the time needed for the oxidized forms of MH12­MH15 to regenerate the neutral dye is 6 µs, 4 µs, 13 µs and 18 µs, respectively, compared to N719 (2.3 µs). These kinetic data confirmed that the weak thermodynamic force, small negative free energy (−ΔG), for regeneration of MH14 and 15 neutral dyes makes the dye regeneration process kinetically sluggish, which contributed significantly to the loss of both photocurrent and photovoltage. This study clearly elucidated that although cyclometallation may produce significantly better light harvesting, the driving force of less than 0.25 eV is not sufficiently enough for effective dye regeneration.

More stable and more efficient alternatives of Z-907: carbazole-based amphiphilic Ru(II) sensitizers for dye-sensitized solar cells.

Here we report two novel amphiphilic Ru(II) heteroleptic bipyridyl complexes, HD-14 and HD-15, compared to previously reported NCSU-10. We have combined the strong electron donor characteristics of carbazole and the hydrophobic nature of different long alkyl chains, C7, C18 and C2 (NCSU-10), tethered to N-carbazole to study their influence on photocurrent, photovoltage and long term stability for dye-sensitized solar cells. Photon harvesting efficiency and electron donating characteristics of carbazole-based ancillary ligands were found to be unaffected by different alkyl chain lengths. However, a slight drop in the Voc of HD-14 and HD-15 was observed compared to that of NCSU-10. It was found by nanosecond flash photolysis transient absorption (TA) measurements that the faster the dye regeneration the higher the photocurrent density response, and the dye regeneration time was found to be 2.6, 3.6, and 3.7 µs for HD-14, HD-15, and N719 dyes, respectively. The difference in the amplitude of the transient absorption (TA) signal of the oxidized dye as measured by femtosecond TA studies is in excellent agreement with the photocurrent generated, which was in the following order HD-14 > HD-15 > N719. Under 1000 h light soaking conditions, HD-15 maintained up to 98% (only 2% loss) of the initial power conversion efficiency compared to 8% loss for HD-14 and 22% loss in the power conversion efficiency for NCSU-10. HD-15 was strikingly stable to light soaking conditions when employed in the presence of an ionic liquid electrolyte, which paves the way for widespread applications of dye-sensitized solar cells with long term stability. The total power conversion efficiency (η) was 9.27% for HD-14 and 9.17% for HD-15 compared to 8.92% for N719.

Identification of the variables associated with pain during transrectal ultrasonography-guided prostate biopsy in the era of periprostatic nerve block: the role of transrectal probe configuration.

OBJECTIVE: To identify the different factors that are associated with pain perceived during transrectal ultrasonography (TRUS)-guided prostate biopsy (PBx), with special focus on the role of transrectal probe configuration. PATIENTS AND METHODS: We analysed prospective data on 1114 patients undergoing TRUS-guided PBx at our institute from January 2007 to August 2010. Patients completed questionnaires based on a 10-point visual analogue pain scale related to the consecutive steps of PBx: probe insertion, application of periprostatic nerve block (PPNB) and the obtaining of PBx cores. The variables of interest were age, prostate volume, DRE findings, number of previous biopsies, probe type and the number of retrieved cores. All variables were correlated to pain scores using multivariate regression analysis. RESULTS: At the probe insertion step, end-fire probes were more painful than side-fire probes. The Siemens G50 with metal, short plastic and long plastic needle guides (Siemens, Munich, Germany) had higher pain scores than the B&K probe (Bruel & Kjaer Medical, Copenhagen, Denmark; P = 0.09, 0.008 and 0.003, respectively). For pain at the PPNB application step, all G50(TM) guide subtypes and the Sonoline Prima probe (Siemens) had higher pain scores than the B&K probe, but this only reached statistical significance for the G50(TM) probe with short plastic guide (P = 0.03). On obtaining PBx cores, all G50(TM) subtypes had higher pain scores when compared with the B&K probe (P = 0.59, 0.38 and 0.69, respectively). CONCLUSIONS: The probe design and needle guide affect pain during each step of TRUS-guided PBx. Both the B&K and Sonoline Prima probes caused less pain when compared with the G50(TM) probe, regardless of needle guide.

Structure-property relationship of extended π-conjugation of ancillary ligands with and without an electron donor of heteroleptic Ru(II) bipyridyl complexes for high efficiency dye-sensitized solar cells.

Two new heteroleptic Ru(II) bipyridyl complexes MH06 and MH11 were designed, synthesized and characterized for DSSCs. While the ancillary ligand of MH06 was molecularly engineered with a strong electron donating group coupled with an extended π-conjugated system, the ancillary ligand of MH11 contained a longer π-conjugated system only. Molecular modeling, photophysical, and photovoltaic properties were compared under the same experimental conditions against the benchmark N719. In an effort to understand the structure-property relationship, their photovoltaic and photoelectrochemical properties including Jsc, Voc, ground and excited state oxidation potentials, UV-Vis absorption, and molar extinction coefficients were studied. The UV-Vis results showed intense MLCT absorption peaks of MH06 and MH11 in the visible region with a red shift of 12 and 18 nm, respectively, with significantly higher molar extinction coefficients compared to N719. Tetrabutylammonium (TBA) substituted MH11-TBA demonstrated the most efficient IPCE of over 90% in the plateau region covering the entire visible spectrum and extending into the near IR region (ca. 890 nm), which showed a solar-to-power conversion efficiency (η) of 10.06%, significantly higher than that of the benchmark N719 dye (9.32%). The superior performance in terms of the IPCE and Jsc of MH11 can be attributed to the bulky and highly hydrophobic nature of the pyrene-based ancillary ligand, which behaves as a shielding barrier for hole-transport recombination between TiO2 and the electrolyte. In addition, the IMPS results showed that the contribution of dyes to the conduction band shift of the TiO2 level is almost similar, regardless of different substitutions on the bipy-moiety. This implies that the open-circuit photovoltage (Voc) increases with reduced charge recombination in the presence of a thick layer of tetrabutyl ammonium ions (TBA) of the dye anchored on the surface of TiO2.

Structure-property relationship of amplified spontaneous emission in organic semiconductor materials: TPD, DPABP, and NPB.

N,N'-Diphenyl-N,N'-bis(3-methylphenyl)-(1,1'-biphenyl)-4,4'-diamine (TPD) was demonstrated to be suitable for stimulated emission in doping and nondoping planar waveguide structure, but the mechanism for its lasing is of ambiguity. With the aim of providing a microsscopic picture for its lasing, we performed a combined experimental and theortical investigation of the absorption, photoluminescence (PL), and stimulated emission of TPD and other two similar molecules: 1,4-bis (diphenylamino)biphenyl (DPABP) and N,N'-diphenyl-N,N'-bis(1-naphthyl)-1,1'-biphenyl-4,4″-diamine (NPB). It was found that DPABP shows the same amplified spontaneous emission (ASE) characteristics as TPD, but NPB did not. In theory, density functional theory (DFT) and Franck-Condon Principle were used to analyze the molecular geometry in the electronic ground state as well as the optically excited state and the vibrational levels in electronic ground state, respectively. The calculation results show that for TPD and DPABP, several strongly elongated high-frequency modes (1199-1664 cm(-1)) in the carbon rings contribute to the distinct first vibronic sideband in the PL spectra, which form an effective four-level system for lasing. For NPB, when the peripheral toluene or benzene is replaced with naphthyl, a number of strongly elongated low-frequency modes (11-689 cm(-1)) deriving from naphthyl leads to a series of energy sublevels, which destroys the four-level system. Our results provided a new insight and better understanding into the lasing of organic molecules.

Synthesis and pharmacological screening of novel meso-substituted porphyrin analogs.

A novel series of mesotetrakis[aryl]-21H,23H-porphyrin derivatives 2a-j was synthesized from the condensation of aldehyde derivatives 1a-j with pyrrole in the presence of p-toluenesulfonic acid. The synthesized porphyrins were considered as a model to study the free radical-induced damage of biological membranes and the protective effects of these porphyrins. It was found that these compounds effectively inhibit the free radical-induced oxidative hemolysis of red blood cells. Compounds 2c and 2d which bear a sulfur atom, a nitro group, and a chlorine atom exhibited markedly higher antihemolysis activity than the other analogous. Compounds 2a, 2c, 2d, and 2j showed the highest protection activity against DNA damage induced by the bleomycin-iron complex. Compounds 2d, 2f, 2i, and 2j were proved to exhibit antioxidative activity.

When serial prostate biopsy is recommended: most cancers detected are clinically insignificant.

UNLABELLED: Study Type - Disagnostic (exploratory cohort) Level of Evidence 2b. What's known on the subject? and What does the study add? Many patients undergo serial biopsy with a low rate of detection of prostate cancer, and the rate of detection declines as more biopsies are pursued. Furthermore, the clinical significance of detected cancer appears to decline as well. It is important to follow all possible methods to detect cancer; however, there should be a parallel consideration for the clinical value for detection of these tumours with low malignant potential. The present study investigated in detail the total rate of cancer detection in serial biopsy and how many of these were deemed clinically insignificant. Moreover, it addressed the impact of detecting premalignant lesions on further detection of cancer in serial biopsy. OBJECTIVE: Many patients pursue serial prostate biopsies after two consecutive negative biopsy sessions. The objective of this study is to determine the indications of serial prostate biopsy and to compare outcomes, including the risk of detecting clinically insignificant cancer using different biopsy protocols in this highly selected population. PATIENTS AND METHODS: • Most cases of prostate cancer are detected on initial or one repeat biopsy, but persistent suspicion of prostate cancer occasionally leads to serial biopsy, which we define as more than two biopsy sessions. We recently showed that transrectal saturation biopsy (sPBx) significantly increases cancer detection when compared with extended schemes (ePBx) in the initial repeat biopsy (second overall biopsy) population, and that most cases identified are clinically significant. • In the past decade, 479 men underwent 749 repeat prostate biopsies after two prior negative biopsy sessions. • The ePBx group included 347 biopsies with 10-14 cores. • The sPBx group included 402 biopsies with >20 cores. • We analysed overall cancer detection and risk of detecting clinically significant vs insignificant tumours. RESULTS: Prostate cancer was detected in 15.9% of 749 serial biopsies, representing a cumulative prostate cancer detection rate of 24.8% (119/479 patients). • The sPBx group had a significantly higher detection rate per biopsy session (18.6% vs 12.7%, P= 0.026). • Nevertheless, most positive biopsies 75/119 (63%) revealed clinically insignificant cancer, including 74.6% of cancers detected by sPBx. CONCLUSION: In men with two prior negative prostate biopsies, prostate cancer detection remains low regardless of clinical indication or transrectal biopsy protocol; most cancers identified are clinically insignificant, suggesting the threshold to repeat biopsy after more than one negative session should be very high.