Tuning Liposome Membrane Permeability by Competitive Coiled Coil Heterodimerization and Heterodimer Exchange.

Membrane-active peptides that enable the triggered release of liposomal cargo are of great interest for the development of liposome-based drug delivery systems but require peptide-lipid membrane interactions that are highly defined and tunable. To this end, we have explored the possibility to use the competing interactions between membrane partitioning and heterodimerization and the folding of a set of four different de novo designed coiled coil peptides. Covalent conjugation of the cationic peptides triggered rapid destabilization of membrane integrity and the release of encapsulated species. The release was inhibited when introducing complementary peptides as a result of heterodimerization and folding into coiled coils. The degree of inhibition was shown to be dictated by the coiled coil peptide heterodimer dissociation constants, and liposomal release could be reactivated by a heterodimer exchange to render the membrane bound peptide free and thus membrane-active. The possibility to tune the permeability of lipid membranes using highly specific peptide-folding-dependent interactions delineates a new possible approach for the further development of responsive liposome-based drug delivery systems.

Glycation Contributes to Interaction Between Human Bone Alkaline Phosphatase and Collagen Type I.

Bone is a biological composite material comprised primarily of collagen type I and mineral crystals of calcium and phosphate in the form of hydroxyapatite (HA), which together provide its mechanical properties. Bone alkaline phosphatase (ALP), produced by osteoblasts, plays a pivotal role in the mineralization process. Affinity contacts between collagen, mainly type II, and the crown domain of various ALP isozymes were reported in a few in vitro studies in the 1980s and 1990s, but have not attracted much attention since, although such interactions may have important implications for the bone mineralization process. The objective of this study was to investigate the binding properties of human collagen type I to human bone ALP, including the two bone ALP isoforms B1 and B2. ALP from human liver, human placenta and E. coli were also studied. A surface plasmon resonance-based analysis, supported by electrophoresis and blotting, showed that bone ALP binds stronger to collagen type I in comparison with ALPs expressed in non-mineralizing tissues. Further, the B2 isoform binds significantly stronger to collagen type I in comparison with the B1 isoform. Human bone and liver ALP (with identical amino acid composition) displayed pronounced differences in binding, revealing that post-translational glycosylation properties govern these interactions to a large extent. In conclusion, this study presents the first evidence that glycosylation differences in human ALPs are of crucial importance for protein-protein interactions with collagen type I, although the presence of the ALP crown domain may also be necessary. Different binding affinities among the bone ALP isoforms may influence the mineral-collagen interface, mineralization kinetics, and degree of bone matrix mineralization, which are important factors determining the material properties of bone.

Site-specific and covalent attachment of his-tagged proteins by chelation assisted photoimmobilization: a strategy for microarraying of protein ligands.

A novel strategy for site-specific and covalent attachment of proteins has been developed, intended for robust and controllable immobilization of histidine (His)-tagged ligands in protein microarrays. The method is termed chelation assisted photoimmobilization (CAP) and was demonstrated using human IgG-Fc modified with C-terminal hexahistidines (His-IgGFc) as the ligand and protein A as the analyte. Alkanethiols terminated with either nitrilotriacetic acid (NTA), benzophenone (BP), or oligo(ethylene glycol) were synthesized and mixed self-assembled monolayers (SAMs) were prepared on gold and thoroughly characterized by infrared reflection absorption spectroscopy (IRAS), ellipsometry, and contact angle goniometry. In the process of CAP, NTA chelates Ni(2+) and the complex coordinates the His-tagged ligand in an oriented assembly. The ligand is then photoimmobilized via BP, which forms covalent bonds upon UV light activation. In the development of affinity biosensors and protein microarrays, site-specific attachment of ligands in a fashion where analyte binding sites are available is often preferred to random coupling. Analyte binding performance of ligands immobilized either by CAP or by standard amine coupling was characterized by surface plasmon resonance in combination with IRAS. The relative analyte response with randomly coupled ligand was 2.5 times higher than when site-specific attachment was used. This is a reminder that also when immobilizing ligands via residues far from the binding site, there are many other factors influencing availability and activity. Still, CAP provides a valuable expansion of protein immobilization techniques since it offers attractive microarraying possibilities amenable to applications within proteomics.

Thermal induction of an alternatively folded state in human IgG-Fc.

We report the formation of a non-native, folded state of human IgG4-Fc induced by a high temperature at neutral pH and at a physiological salt concentration. This structure is similar to the molten globule state in that it displays a high degree of secondary structure content and surface-exposed hydrophobic residues. However, it is highly resistant to chemical denaturation. The thermally induced state of human IgG4-Fc is thus associated with typical properties of the so-called alternatively folded state previously described for murine IgG, IgG-Fab, and individual antibody domains (V(L), V(H), C(H)1, and C(H)3) under acidic conditions in the presence of anions. Like some of these molecules, human IgG4-Fc in its alternative fold exists as a mixture of different oligomeric structures, dominated by an equilibrium between monomeric and heptameric species. Heating further induces the formation of fibrous structures in the micrometer range.

Designed surface with tunable IgG density as an in vitro model for immune complex mediated stimulation of leukocytes.

We present the design of an in vitro model for immune-complex-mediated stimulation of leukocytes and its functional characteristics with respect to monocyte adhesion. The model was based on the orientation-controlled immobilization of a humanized IgG1 monoclonal antibody (rituximab) via its interaction with a biotinylated peptide epitope derived from the CD20 marker. The peptide was linked to neutravidin covalently attached to a mixed self-assembled monolayer of carboxyl- and methoxy-terminated oligo(ethylene glycol) alkane thiolates on gold. The surface adhesion propensity of human monocytes (cell line U937) was highly dependent on the lateral IgG density and indicated that there exists a distance between IgG-Fc on the surface where interactions with Fc gamma receptors are optimal. This well-defined platform allows for a careful control of the size and orientation of artificial IgG immune complexes, it is easily made compatible with, for example, cellular imaging, and it will become useful for in vitro studies on the importance of Fc gamma receptor interactions in chronic immune-mediated diseases.

Environmentally sensitive fluorescent sensors based on synthetic peptides.

Biosensors allow the direct detection of molecular analytes, by associating a biological receptor with a transducer able to convert the analyte-receptor recognition event into a measurable signal. We review recent work aimed at developing synthetic fluorescent molecular sensors for a variety of analytes, based on peptidic receptors labeled with environmentally sensitive fluorophores. Fluorescent indicators based on synthetic peptides are highly interesting alternatives to protein-based sensors, since they can be synthesized chemically, are stable, and can be easily modified in a site-specific manner for fluorophore coupling and for immobilization on solid supports.

Colorimetric protein sensing by controlled assembly of gold nanoparticles functionalized with synthetic receptors.

A novel strategy is described for the colorimetric sensing of proteins, based on polypeptide-functionalized gold nanoparticles. Recognition is accomplished using a polypeptide sensor scaffold designed to specifically bind to the model analyte, human carbonic anhydrase II (HCAII). The extent of particle aggregation, induced by the Zn(2+)-triggered dimerization and folding of a second polypeptide also present on the surface of the gold nanoparticle, gives a readily detectable colorimetric shift that is dependent on the concentration of the target protein. In the absence of HCAII, particle aggregation results in a major redshift of the plasmon peak, whereas analyte binding prevented the formation of dense aggregates, significantly reducing the magnitude of the redshift. The versatility of the technique is demonstrated using a second model system based on the recognition of a peptide sequence from the tobacco mosaic virus coat protein (TMVP) by a recombinant antibody fragment (Fab57P). Concentrations down to approximately 10 nM and approximately 25 nM are detected for HCAII and Fab57P, respectively. This strategy is proposed as a generic platform for robust and specific protein analysis that can be further developed to monitor a wide range of target proteins.

Sequence and length optimization of membrane active coiled coils for triggered liposome release.

Defined and tunable peptide-lipid membrane interactions that trigger the release of liposome encapsulated drugs may offer a route to improving the efficiency and specificity of liposome-based drug delivery systems, but this require means to tailor the performance of the membrane active peptides. In this paper, the membrane activity of a de novo designed coiled coil peptide has been optimized with respect to sequence and size to improve release efficiency of liposome encapsulated cargo. The peptides were only membrane active when covalently conjugated to the liposomes. Two amino acid substitutions were made to enhance the amphipathic characteristics of the peptide, which increased the release by a factor of five at 1 µM. Moreover, the effect of peptide length was investigated by varying the number of heptad repeats from 2 to 5, yielding the peptides KVC2-KVC5. The shortest peptide (KVC2) showed the least interaction with the membrane and proved less efficient than the longer peptides in releasing the liposomal cargo. The peptide with three heptads (KVC3) caused liposome aggregation whereas KVC4 proved to effectively release the liposomal cargo without causing aggregation. The longest peptide (KVC5) demonstrated the most defined α-helical secondary structure and the highest liposome surface concentration but showed slower release kinetics than KVC4. The four heptad peptide KVC4 consequently displayed optimal properties for triggering the release and is an interesting candidate for further development of bioresponsive and tunable liposomal drug delivery systems.

Folding induced assembly of polypeptide decorated gold nanoparticles.

Reversible assembly of gold nanoparticles controlled by the homodimerization and folding of an immobilized de novo designed synthetic polypeptide is described. In solution at neutral pH, the polypeptide folds into a helix-loop-helix four-helix bundle in the presence of zinc ions. When immobilized on gold nanoparticles, the addition of zinc ions induces dimerization and folding between peptide monomers located on separate particles, resulting in rapid particle aggregation. The particles can be completely redispersed by removal of the zinc ions from the peptide upon addition of EDTA. Calcium ions, which do not induce folding in solution, have no effect on the stability of the peptide decorated particles. The contribution from folding on particle assembly was further determined utilizing a reference peptide with the same primary sequence but containing both D and L amino acids. Particles functionalized with the reference peptide do not aggregate, as the peptides are unable to fold. The two peptides, linked to the nanoparticle surface via a cysteine residue located in the loop region, form submonolayers on planar gold with comparable properties regarding surface density, orientation, and ability to interact with zinc ions. These results demonstrate that nanoparticle assembly can be induced, controlled, and to some extent tuned, by exploiting specific molecular interactions involved in polypeptide folding.

A peptide-based, ratiometric biosensor construct for direct fluorescence detection of a protein analyte.

We present the design, synthesis, and functional evaluation of peptide-based fluorescent constructs for wavelength-ratiometric biosensing of a protein analyte. The concept was shown using the high-affinity model interaction between the 18 amino acid peptide pTMVP and a recombinant antibody fragment, Fab57P. pTMVP was functionalized in two different positions with 6-bromomethyl-2-(2-furanyl)-3-hydroxychromone, an environmentally sensitive fluorophore with a two-band emission. The equilibrium dissociation constant of the interaction between pTMVP and Fab57P was largely preserved upon labeling. The biosensor ability of the labeled peptide constructs was evaluated in terms of the relative intensity change of the emission bands from the normal (N*) and tautomer (T*) excited-state species of the fluorophore ( I(N*)/I(T*)) upon binding of Fab57P. When the peptide was labeled in the C terminus, the I(N*)/I(T*) ratio changed by 40% upon analyte binding, while labeling close to the residues most important for binding resulted in a construct that completely lacked ratiometric biosensor ability. Integrated biosensor elements for reagentless detection, where peptides and ratiometric fluorophores are combined to ensure robustness in both recognition and signaling, are expected to become an important contribution to the design of future protein quantification assays in immobilized formats.

The binding of human carbonic anhydrase II by functionalized folded polypeptide receptors.

Several receptors for human carbonic anhydrase II (HCAII) have been prepared by covalently attaching benzenesulfonamide carboxylates via aliphatic aminocarboxylic acid spacers of variable length to the side chain of a lysine residue in a designed 42 residue helix-loop-helix motif. The sulfonamide group binds to the active site zinc ion of human carbonic anhydrase II located in a 15 A deep cleft. The dissociation constants of the receptor-HCAII complexes were found to be in the range from low micromolar to better than 20 nM, with the lowest affinities found for spacers with less than five methylene groups and the highest affinity found for the spacer with seven methylene groups. The results suggest that the binding is a cooperative event in which both the sulfonamide residue and the helix-loop-helix motif contribute to the overall affinity.

Self-sorting heterodimeric coiled coil peptides with defined and tuneable self-assembly properties.

Coiled coils with defined assembly properties and dissociation constants are highly attractive components in synthetic biology and for fabrication of peptide-based hybrid nanomaterials and nanostructures. Complex assemblies based on multiple different peptides typically require orthogonal peptides obtained by negative design. Negative design does not necessarily exclude formation of undesired species and may eventually compromise the stability of the desired coiled coils. This work describe a set of four promiscuous 28-residue de novo designed peptides that heterodimerize and fold into parallel coiled coils. The peptides are non-orthogonal and can form four different heterodimers albeit with large differences in affinities. The peptides display dissociation constants for dimerization spanning from the micromolar to the picomolar range. The significant differences in affinities for dimerization make the peptides prone to thermodynamic social self-sorting as shown by thermal unfolding and fluorescence experiments, and confirmed by simulations. The peptides self-sort with high fidelity to form the two coiled coils with the highest and lowest affinities for heterodimerization. The possibility to exploit self-sorting of mutually complementary peptides could hence be a viable approach to guide the assembly of higher order architectures and a powerful strategy for fabrication of dynamic and tuneable nanostructured materials.

Chemistry-specific surface adsorption of the barnacle settlement-inducing protein complex.

Gregarious settlement in barnacle larvae (cyprids) is induced by a contact pheromone, the settlement-inducing protein complex (SIPC). The SIPC has been identified both in the cuticle of adult barnacles and in the temporary adhesive secretion (footprint) of cyprids. Besides acting as a settlement inducer, the presence of the SIPC in footprints points to its additional involvement in the adhesion process. SIPC adsorption behaviour was therefore investigated on a series of self-assembled monolayers (SAMs) by surface plasmon resonance at the pH of seawater (8.3). Fibrinogen and α2-macroglobulin (A2M) (blood complement protease inhibitors with which the SIPC shares 29% sequence homology) were used in the adsorption experiments as positive and negative standards, respectively. The mass uptake of the SIPC was comparable to that of fibrinogen, with adsorption observed even on the protein-resistant oligo(ethylene glycol) surface. Notably, on the positively charged SAM the SIPC showed a kinetic overshoot, indicating a metastable configuration causing the amount of adsorbed protein to temporarily exceed its equilibrium value. A2M adsorption was low or negligible on all SAMs tested, except for the positively charged surface, indicating that A2M adsorption is mainly driven by electrostatics. Evaluation of SIPC non-specific adsorption kinetics revealed that it adsorbed irreversibly and non-cooperatively on all surfaces tested.

Generic phosphatase activity detection using zinc mediated aggregation modulation of polypeptide-modified gold nanoparticles.

A challenge in the design of plasmonic nanoparticle-based colorimetric assays is that the change in colloidal stability, which generates the colorimetric response, is often directly linked to the biomolecular recognition event. New assay strategies are hence required for every type of substrate and enzyme of interest. Here, a generic strategy for monitoring of phosphatase activity is presented where substrate recognition is completely decoupled from the nanoparticle stability modulation mechanism, which enables detection of a wide range of enzymes using different natural substrates with a single simple detection scheme. Phosphatase activity generates inorganic phosphate that forms an insoluble complex with Zn(2+). In a sample containing a preset concentration of Zn(2+), phosphatase activity will markedly reduce the concentration of dissolved Zn(2+) from the original value, which in turn affects the aggregation of gold nanoparticles functionalized with a designed Zn(2+) responsive polypeptide. The change in nanoparticle stability thus provides a rapid and sensitive readout of the phosphatase activity. The assay is not limited to a particular enzyme or enzyme substrate, which is demonstrated using three completely different phosphatases and five different substrates, and thus constitutes a highly interesting system for drug screening and diagnostics.

A multiple-ligand approach to extending the dynamic range of analyte quantification in protein microarrays.

This work describes a concept for extending the dynamic range of quantification in an affinity biosensor assay by using a set of ligands with different affinities toward a common analyte. Three synthetic, biotinylated polypeptides capable of binding a model protein analyte with different affinities (10(-9) M < or = K(d) < or = 10(-7) M) were immobilized in a microarray format on a gold slide covered with an oligo(ethylene glycol)-containing alkane thiolate self-assembled monolayer. A five-element affinity array, comprising single-peptide spots as well as spots where peptides were immobilized in mixtures, was realized by means of piezodispensation. Imaging surface plasmon resonance was used to study binding of the analyte to the different spots. The lower limit of analyte quantification was approximately 3 nM and the corresponding upper limit was increased by more than an order of magnitude compared to if only the highest affinity ligand would have been used. Affinity array sensors with multiple ligands for each analyte are particularly interesting for omitting dilution steps and providing highly accurate data in assays where several analytes such as disease biomarkers with extremely variable concentrations are quantified in parallel.

Assembly of polypeptide-functionalized gold nanoparticles through a heteroassociation- and folding-dependent bridging.

Gold nanoparticles were functionalized with a synthetic polypeptide, de novo-designed to associate with a charge complementary linker polypeptide in a folding-dependent manner. A heterotrimeric complex that folds into two disulphide-linked four-helix bundles is formed when the linker polypeptide associates with two of the immobilized peptides. The heterotrimer forms in between separate particles and induces a rapid and extensive aggregation with a well-defined interparticle spacing. The aggregated particles are redispersed when the disulphide bridge in the linker polypeptide is reduced.

An indirect competitive immunoassay for insulin autoantibodies based on surface plasmon resonance.

We have developed a sensitive and specific method based on surface plasmon resonance (SPR) for detection of insulin autoantibodies (IAA) in serum samples from individuals at high risk of developing type 1 diabetes (T1D). When measuring trace molecules in undiluted sera with label-free techniques like SPR, non-specific adsorption of matrix proteins to the sensor surface is often a problem, since it causes a signal that masks the analyte response. The developed method is an indirect competitive immunoassay designed to overcome these problems. Today, IAA is mainly measured in radio immunoassays (RIAs), which are time consuming and require radioactively labeled antigen. With our SPR-based immunoassay the overall assay time is reduced by a factor of >100 (4 days to 50min), while sensitivity is maintained at a level comparable to that offered by RIA.

Aggregation-induced folding of a de novo designed polypeptide immobilized on gold nanoparticles.

This communication reports the first steps in the construction of a novel, nanoparticle-based hybrid material for biomimetic and biosensor applications. Gold nanoparticles were modified with synthetic polypeptides to enable control of the particle aggregation state in a switchable manner, and particle aggregation was, in turn, found to induce folding of the immobilized peptides.

Designed, functionalized helix-loop-helix motifs that bind human carbonic anhydrase II: a new class of synthetic receptor molecules.

Polypeptides designed to fold into helix-loop-helix motifs and to dimerize to form four-helix bundles were functionalized by the introduction of a sulfonamide derivative known to bind human carbonic anhydrase II (HCAII) and one or both of the dansyl- and methoxycoumarin fluorescent probes. The 42-residue sequence DC that carries all three substituents in solvent-exposed positions was found to bind HCAII with a dissociation constant of 5 nM in aqueous solution at pH 7. At 2 muM concentration, DC was mainly dimeric in aqueous solution but bound HCAII as a monomer. Upon addition of a large excess of a helix-loop-helix motif without a high-affinity ligand, KE2-Q, a ternary complex was formed between HCAII, DC, and KE2-Q. Hydrophobic interactions between DC and HCAII and coordination of the sulfonamide group to the zinc ion of HCAII contributed cooperatively to binding in a demonstration of the usefulness of folded polypeptide-small organic molecule chimera as novel protein receptors. The DC homodimer was found to be a very sensitive biosensor component due to intermolecular quenching of its fluorescence that was inhibited upon binding to HCAII.