Particle Engineering via Supramolecular Assembly of Macroscopic Hydrophobic Building Blocks.

Tailoring the hydrophobicity of supramolecular assembly building blocks enables the fabrication of well-defined functional materials. However, the selection of building blocks used in the assembly of metal-phenolic networks (MPNs), an emerging supramolecular assembly platform for particle engineering, has been essentially limited to hydrophilic molecules. Herein, we synthesized and applied biscatechol-functionalized hydrophobic polymers (poly(methyl acrylate) (PMA) and poly(butyl acrylate) (PBA)) as building blocks to engineer MPN particle systems (particles and capsules). Our method allowed control over the shell thickness (e.g., between 10 and 21 nm), stiffness (e.g., from 10 to 126 mN m-1 ), and permeability (e.g., 28-72 % capsules were permeable to 500 kDa fluorescein isothiocyanate-dextran) of the MPN capsules by selection of the hydrophobic polymer building blocks (PMA or PBA) and by controlling the polymer concentration in the MPN assembly solution (0.25-2.0 mM) without additional/engineered assembly processes. Molecular dynamics simulations provided insights into the structural states of the hydrophobic building blocks during assembly and mechanism of film formation. Furthermore, the hydrophobic MPNs facilitated the preparation of fluorescent-labeled and bioactive capsules through postfunctionalization and also particle-cell association engineering by controlling the hydrophobicity of the building blocks. Engineering MPN particle systems via building block hydrophobicity is expected to expand their use.

Synthesis of Thermoresponsive, Catechol-Rich Poly(ethylene glycol) Brush Polymers for Attenuating Cellular Oxidative Stress.

Herein, we report a platform to integrate customizable quantities of catechol units into polymers by reacting caffeic acid carbonic anhydride with polymers having pendant amine groups. Brush poly(ethylene glycol)-caffeamide (PEG-CAF) copolymers based on oligo(ethylene glycol)methyl ether methacrylate (OEGMA500) were obtained with a catechol content of approximately 30, 40, and 50 mol % (vs OEGMA content). Owing to the hydrophobicity of the introduced CAF groups, the catechol copolymers exhibited cloud points in the range of 23-46 °C and were used to fabricate thermoresponsive FeIII metal-phenolic network capsules. Polymers with the highest CAF content (50 mol %) proved most effective for attenuating reactive oxygen species levels in vitro, in co-cultured fibroblasts, and breast cancer cells, even in the presence of an exogenous oxidant source. The reported approach to synthesize customizable catechol materials could be generalized to other amine-functional polymers, with potential biomedical applications such as adhesives or stimuli-responsive drug delivery systems.

Macromolecular Engineering of Thermoresponsive Metal-Phenolic Networks.

Dynamic nanostructured materials that can react to physical and chemical stimuli have attracted interest in the biomedical and materials science fields. Metal-phenolic networks (MPNs) represent a modular class of such materials: these networks form via coordination of phenolic molecules with metal ions and can be used for surface and particle engineering. To broaden the range of accessible MPN properties, we report the fabrication of thermoresponsive MPN capsules using FeIII ions and the thermoresponsive phenolic building block biscatechol-functionalized poly(N-isopropylacrylamide) (biscatechol-PNIPAM). The MPN capsules exhibited reversible changes in capsule size and shell thickness in response to temperature changes. The temperature-induced capsule size changes were influenced by the chain length of biscatechol-PNIPAM and catechol-to-FeIII ion molar ratio. The metal ion type also influenced the capsule size changes, allowing tuning of the MPN capsule mechanical properties. AlIII-based capsules, having a lower stiffness value (10.7 mN m-1), showed a larger temperature-induced size contraction (∼63%) than TbIII-based capsules, which exhibit a higher stiffness value (52.6 mN m-1) and minimal size reduction (<1%). The permeability of the MPN capsules was controlled by changing the temperature (25-50 °C)─a reduced permeability was obtained as the temperature was increased above the lower critical solution temperature of biscatechol-PNIPAM. This temperature-dependent permeability behavior was exploited to encapsulate and release model cargo (500 kDa fluorescein isothiocyanate-tagged dextran) from the capsules; approximately 70% was released over 90 min at 25 °C. This approach provides a synthetic strategy for developing dynamic and thermoresponsive-tunable MPN systems for potential applications in biological science and biotechnology.

Trisulfide-Bearing PEG Brush Polymers Donate Hydrogen Sulfide and Ameliorate Cellular Oxidative Stress.

A potential approach to combat cellular dysfunction is to manipulate cell communication and signaling pathways to restore physiological functions while protecting unaffected cells. For instance, delivering the signaling molecule H2S to certain cells has been shown to restore cell viability and re-normalize cell behavior. We have previously demonstrated the ability to incorporate a trisulfide-based H2S-donating moiety into linear polymers with good in vitro releasing profiles and demonstrated their potential for ameliorating oxidative stress. Herein, we report two novel series of brush polymers decorated with higher numbers of H2S-releasing segments. These materials contain two trisulfide-based monomers co-polymerized with oligo(ethylene glycol methyl ether methacrylate) via reversible addition-fragmentation chain-transfer polymerization. The macromolecules were characterized to have a range of trisulfide densities with similar, well-defined molecular weight distribution, good H2S-releasing profiles, and high cellular tolerance. Using an amperometric technique, the H2S liberated and total sulfide release were found to depend on concentrations and chemical nature of triggering molecules (glutathione and cysteine) and, importantly, the position of reactive groups within the brush structure. Notably, when introduced to cells at well-tolerated doses, two macromolecular donors which have the same proportion as of the H2S-donating monomer (30%) but differ in releasing moiety location show similar cellular H2S-releasing kinetics. These donors can restore reactive oxygen species levels to baseline values, when polymer pretreated cells are exposed to exogenous oxidants (H2O2). Our work opens up a new aspect in preparing H2S macromolecule donors and their application to arresting cellular oxidative cascades.

Macromolecular Hydrogen Sulfide Donors Trigger Spatiotemporally Confined Changes in Cell Signaling.

Hydrogen sulfide (H2S) is involved in a myriad of cell signaling processes that trigger physiological events ranging from vasodilation to cell proliferation. Moreover, disturbances to H2S signaling have been associated with numerous pathologies. As such, the ability to release H2S in a cellular environment and stimulate signaling events is of considerable interest. Herein we report the synthesis of macromolecular H2S donors capable of stimulating cell signaling pathways in both the cytosol and at the cell membrane. Specifically, copolymers having pendent oligo(ethylene glycol) and benzonitrile groups were synthesized, and the benzonitrile groups were subsequently transformed into primary aryl thioamide groups via thionation using sodium hydrosulfide. These thioamide moieties could be incorporated into a hydrophilic copolymer or a block copolymer (i.e., into either the hydrophilic or hydrophobic domain). An electrochemical sensor was used to demonstrate release of H2S under simulated physiological conditions. Subsequent treatment of HEK293 cells with a macromolecular H2S donor elicited a slow and sustained increase in cytosolic ERK signaling, as monitored using a FRET-based biosensor. The macromolecular donor was also shown to induce a small, fast and sustained increase in plasma membrane-localized PKC activity immediately following addition to cells. Studies using an H2S-selective fluorescent probe in live cells confirmed release of H2S from the macromolecular donor over physiologically relevant time scales consistent with the signaling observations. Taken together, these results demonstrate that by using macromolecular H2S donors it is possible to trigger spatiotemporally confined cell signaling events. Moreover, the localized nature of the observed signaling suggests that macromolecular donor design may provide an approach for selectively stimulating certain cellular biochemical pathways.

Facile One-step Micropatterning Using Photodegradable Methacrylated Gelatin Hydrogels for Improved Cardiomyocyte Organization and Alignment.

Hydrogels are often employed as temporary platforms for cell proliferation and tissue organization in vitro. Researchers have incorporated photodegradable moieties into synthetic polymeric hydrogels as a means of achieving spatiotemporal control over material properties. In this study protein-based photodegradable hydrogels composed of methacrylated gelatin (GelMA) and a crosslinker containing o-nitrobenzyl ester groups have been developed. The hydrogels are able to degrade rapidly and specifically in response to UV light and can be photopatterned to a variety of shapes and dimensions in a one-step process. Micropatterned photodegradable hydrogels are shown to improve cell distribution, alignment and beating regularity of cultured neonatal rat cardiomyocytes. Overall this work introduces a new class of photodegradable hydrogel based on natural and biofunctional polymers as cell culture substrates for improving cellular organization and function.

Cholesterol Modified Self-Assemblies and Their Application to Nanomedicine.

Cholesterol is a ubiquitous molecule in biological systems, and in particular plays various important roles in mammalian cellular processes. The presence of cholesterol is integral to the structure and behavior of biological membranes, and profoundly influences membrane involvement in cellular mechanisms. This review focuses on the incorporation of cholesterol into synthetic nanomaterials and assemblies, focusing on LC phase behavior, morphology/self-organization and hydrophobic interactions, all important factors in the design of nanomedicines. We highlight cholesteryl conjugates, liposomes and polymeric micelles, focusing on self-assembly capabilities, drug encapsulation and intracellular delivery. An area of considerable interest identified in this review is the use of cholesteryl-functional vectors to deliver drugs or nucleic acids. Such applications depend on the ability of the nanoparticle carrier to associate with both the cellular and endosomal membrane.

Low Fouling Electrospun Scaffolds with Clicked Bioactive Peptides for Specific Cell Attachment.

While electrospun fibers are of interest as scaffolds for tissue engineering applications, nonspecific surface interactions such as protein adsorption often prevent researchers from controlling the exact interactions between cells and the underlying material. In this study we prepared electrospun fibers from a polystyrene-based macroinitiator, which were then grafted with polymer brushes using surface-initiated atom transfer radical polymerization (SI-ATRP). These brush coatings incorporated a trimethylsilyl-protected PEG-alkyne monomer, allowing azide functional molecules to be covalently attached, while simultaneously reducing nonspecific protein adsorption on the fibers. Cells were able to attach and spread on fibrous substrates functionalized with a pendant RGD-containing peptide, while spreading was significantly reduced on nonfunctionalized fibers and those with the equivalent RGE control peptide. This effect was observed both in the presence and absence of serum in the culture media, indicating that protein adsorption on the fibers was minimal and cell adhesion within the fibrous scaffold was mediated almost entirely through the cell-adhesive RGD-containing peptide.

A comparative study on surface-engineered nanoceria using a catechol copolymer design: colloidal stability vs. antioxidant activity.

Nanoceria (NC) are widely studied as potent nanozyme antioxidants, featuring unique multifunctional, self-regenerative, and high-throughput enzymatic functions. However, bare NC are reported to show poor colloidal stability in biological media. Despite this, the nexus between colloidal stability and antioxidant activity has rarely been assessed. Here, a library of three copolymeric stabilising agents was synthesised, each consisting of hydrophilic poly(oligo(ethylene glycol) methyl ether methacrylate) brushes (P(OEGMA)) and a novel catechol anchoring block, and used for surface engineering of NC. The colloidal stability of the surface-engineered NC was assessed in phosphate buffered saline (PBS) by monitoring their precipitation via UV-Vis spectrophotometry, and their catalase (CAT)- and superoxide dismutase (SOD)-like activities were analysed using fluorospectrophotometry. The obtained results indicate that P(OEGMA) coating improves colloidal stability of NC over 48 h, highlighting the stable attachment of catechol functionalities to the surface of NC. In addition, X-ray photoelectron spectroscopy (XPS) indicates that the catechol functionalities lead to an increase in Ce3+/Ce4+ ratio and the concentration of oxygen vacancies, depending on the number of catechol units. Altogether, surface engineering of NC optimally results in an increase in CAT- and SOD-like activities by, respectively, 41% (=57.7% H2O2 elimination) and 78% (=78.0% O2˙- elimination) relative to bare NC, signifying a positive correlation between colloidal stability and antioxidant activity of the NC nanozymes.

Thiol-responsive lyotropic liquid crystals exhibit triggered phase re-arrangement and hydrogen sulfide (H2S) release.

Hydrogen sulfide (H2S) is an important signalling molecule with potential pharmaceutical applications. In pursuit of a suitable delivery system for H2S, herein we apply an amphiphilic trisulfide to concomitantly alter the mesophase behaviour of dispersed lipid particles and enable triggered H2S release. Amperometric release studies indicate the trisulfide acts as a sustained H2S donor, with inclusion into the mesophase attenuating release vs neat dispersed trisulfide. Taken together the results highlight the potential for including trisulfide-based additives in stimuli-responsive drug delivery vehicles.

Nitroxide-functional PEGylated nanostars arrest cellular oxidative stress and exhibit preferential accumulation in co-cultured breast cancer cells.

The limited application of traditional antioxidants to reducing elevated levels of reactive oxygen species (ROS) is potentially due to their lack of stability and biocompatibility when tested in a biological milieu. For instance, the poor biological antioxidant performance of small molecular nitroxides arises from their limited diffusion across cell membranes and their significant side effects when applied at high doses. Herein, we describe the use of nanostructured carriers to improve the antioxidant activity of a typical nitroxide derivative, (2,2,6,6-tetramethylpiperidin-1-yl)oxyl (TEMPO). Polymers with star-shaped structures were synthesised and were further conjugated to TEMPO moieties via amide linkages. The TEMPO-loaded stars have small hydrodynamic sizes (<20 nm), and are better tolerated by cells than free TEMPO in a breast cancer-fibroblast co-culture, a system exhibiting elevated ROS levels. At a well-tolerated concentration, the polymer with the highest TEMPO-loading capacity successfully downregulated ROS production in co-cultured cells (a significant decrease of up to 50% vs. basal ROS levels), which was accompanied by a specific reduction in superoxide anion generation in the mitochondria. In contrast, the equivalent concentration of free TEMPO did not achieve the same outcome. Further investigation showed that the TEMPO-conjugated star polymers can be recycled inside the cells, thus providing longer term scavenging activity. Cell association studies demonstrated that the polymers can be taken up by both cell types in the co-culture, and are found to co-locate with the mitochondria. Interestingly the stars exhibited preferential mitochodria targeting in the co-cultured cancer cells compared to accompanying fibroblasts. The data suggest the potential of TEMPO-conjugated star polymers to arrest oxidative stress for various applications in cancer therapy.

Trisulfide linked cholesteryl PEG conjugate attenuates intracellular ROS and collagen-1 production in a breast cancer co-culture model.

The progression of cancer has been closely-linked with augmentation of cellular reactive oxygen species (ROS) levels and ROS-associated changes in the tumour microenvironment (TME), including alterations to the extracellular matrix and associated low drug uptake. Herein we report the application of a co-culture model to simulate the ROS based cell-cell interactions in the TME using fibroblasts and breast cancer cells, and describe how novel reactive polymers can be used to modulate those interactions. Under the co-culture conditions, both cell types exhibited modifications in behaviour, including significant overproduction of ROS in the cancer cells, and elevation of the collagen-1 secretion and stained actin filament intensity in the fibroblasts. To examine the potential of using reactive antioxidant polymers to intercept ROS communication and thereby manipulate the TME, we employed H2S-releasing macromolecular conjugates which have been previously demonstrated to mitigate ROS production in HEK cells. The specific conjugate used, mPEG-SSS-cholesteryl (T), significantly reduced ROS levels in co-cultured cancer cells by approximately 50%. This reduction was significantly greater than that observed with the other positive antioxidant controls. Exposure to T was also found to downregulate levels of collagen-1 in the co-cultured fibroblasts, while exhibiting less impact on cells in mono-culture. This would suggest a possible downstream effect of ROS-mitigation by T on stromal-tumour cell signalling. Since fibroblast-derived collagens modulate crucial steps in tumorigenesis, this ROS-associated effect could potentially be harnessed to slow cancer progression. The model may also be beneficial for interrogating the impact of antioxidants on naturally enhanced ROS levels, rather than relying on the application of exogenous oxidants to simulate elevated ROS levels.

Noncovalent liposome linkage and miniaturization of capsosomes for drug delivery.

We report the synthesis of poly(methacrylic acid)-co-(oleyl methacrylate) with three different amounts of oleyl methacrylate and compare the ability of these polymers with that of poly(methacrylic acid)-co-(cholesteryl methacrylate) (PMA(c)) to noncovalently anchor liposomes to polymer layers. We subsequently assembled ∼1 µm diameter PMA(c)-based capsosomes, polymer hydrogel capsules that contain up to ∼2000 liposomal subcompartments, and investigate the potential of these carriers to deliver water-insoluble drugs by encapsulating two different antitumor compounds, thiocoraline or paclitaxel, into the liposomes. The viability of lung cancer cells is used to substantiate the cargo concentration-dependent activity of the capsosomes. These findings cover several crucial aspects for the application of capsosomes as potential drug delivery vehicles.

H2S-Donating trisulfide linkers confer unexpected biological behaviour to poly(ethylene glycol)-cholesteryl conjugates.

Inspired by the properties of the naturally occurring H2S donor, diallyl trisulfide (DATS, extracted from garlic), the biological behaviour of trisulfide-bearing PEG-conjugates was explored. Specifically, three conjugates comprising an mPEG tail and a cholesteryl head were investigated: conjugates bridged by a trisulfide linker (T), a disulfide linker (D) or a carbamate linker (C), and a fourth comprising two mPEG tails bridged by a trisulfide linker (P). H2S testing using both a fluorescent chemical probe in HEK293 cells and an amperometric sensor to monitor release in suspended cells, demonstrated the ability of the trisulfide conjugates, T and P, to release H2S in the presence of cellular thiols. Cytotoxicity and cyto-protective capacity on HEK293 cells showed that T was the best tolerated of the conjugates studied, and remarkably more so than D or C. Moreover, it was noted that application of T conferred a protective effect to the cells, effectively abolishing the toxicity associated with co-administered C. The interaction of conjugates and combinations thereof with the cell membrane of HEK cells, as well as ROS generation were also investigated. It was found that C caused significant membrane perturbation, correlating with high losses in cell viability and pronounced generation of ROS, especially in the mitochondria. T, however, did not disturb the membrane and was able to mitigate the generation of ROS, especially in the mitochondria. The interplay of the cholesteryl group and H2S donation for conferring cytoprotective effects was clearly demonstrated as P did not display the same beneficial characteristics as T.

Polymers with Dithiobenzoate End Groups Constitutively Release Hydrogen Sulfide upon Exposure to Cysteine and Homocysteine.

Dithioesters are well-established as efficient reversible addition-fragmentation chain transfer (RAFT) agents. More recently, certain small molecule dithioesters have been reported to release the biological signaling molecule hydrogen sulfide (H2S) upon exposure to cysteine. Herein, we examine the propensity of polymers synthesized using RAFT with a dithioester chain transfer agent to release H2S via reaction of cysteine with constitutive dithioester end-groups. Homocysteine-triggered release of H2S from these materials is also observed, with evidence suggesting that the mechanism is analogous to the reaction with cysteine.

Neck paraganglioma and follicular lymphoma: a case report.

BACKGROUND: Paragangliomas and pheochromocytomas are sympathetic or parasympathetic tumors derived from the paraganglia and the adrenal medulla, respectively. Paragangliomas and pheochromocytomas can be sporadic or familial, the latter frequently being multifocal and possibly due to succinate dehydrogenase complex genes mutations. In addition, 12% of sporadic paragangliomas are related to covered succinate dehydrogenase complex mutations. The importance of identifying succinate dehydrogenase complex mutations is related to the risk for these patients of developing multiple tumors, including non-endocrine ones, showing an aggressive clinical presentation. CASE PRESENTATION: We report the case of a 45-year-old Caucasian man with an indolent mass in his neck. Ultrasound of his neck, magnetic resonance imaging, and 1,4,7,10-tetraazacyclododecane-N(I),N(II),N(III),N(IIII)-tetraacetic acid(D)-Phe(1)-thy(3)-octreotide (68Ga-DOTATOC) positron emission tomography-computed tomography and endocrine work-up were consistent with a carotid body paraganglioma with concomitant nodal enlargement in several body regions, which turned out to be a follicular lymphoma at histology. He was found to carry a germline Succinate dehydrogenase subunit B gene (SDHB) mutation. CONCLUSION: It is crucial to look for a second malignancy in the case of a paraganglioma demonstrating succinate dehydrogenase complex germline mutations.

Wavelength-Selective Coupling and Decoupling of Polymer Chains via Reversible [2 + 2] Photocycloaddition of Styrylpyrene for Construction of Cytocompatible Photodynamic Hydrogels.

Reversible photocycloaddition reactions have previously been employed in chemical cross-linking for the preparation of biomaterial scaffolds. However, the processes require activation by high-energy UV light, rendering them unsuitable for modification in biological environments. Here we demonstrate that the [2 + 2] photocycloaddition of styrylpyrene can be activated by visible light at λ = 400-500 nm, enabling rapid and effective conjugation and cross-linking of poly(ethylene glycol) (PEG) in water and under mild irradiation conditions (I = 20 mW cm-2). Notably, the reversion of the cycloaddition can be triggered by low-energy UV light at λ = 340 nm, which allows for efficient cleavage of the dimer adduct. Using this wavelength-gated reversible photochemical reaction we are able to prepare PEG hydrogels and modulate their mechanical properties in a bidirectional manner. We also demonstrate healing of the fractured hydrogel by external light triggers. Furthermore, we show that human mesenchymal stem cells can be encapsulated within the gels with high viability post encapsulation. This photochemical approach is therefore anticipated to be highly useful in studies of cell mechanotransduction, with relevance to disease progression and tissue regeneration.

[The assessment of nurses satisfaction for an organization that values posts and professional responsibilities]. / Contributi valutazione della soddisfazione per l'organizzazione basata sulla valorizzazione di posizioni funzionali, tra gli infermieri del Policlinico S. Orsola-Malpighi.

UNLABELLED: To assess the effectiveness of a new organizational model for professional development, that assigns and financially rewards 12 positions that encompass specific responsibilities (such as responsible of Evidence based Nursing; expert in pressure ulcers, responsible of the newly employed nurses), nurses' satisfaction was measured. METHOD: From November to December 2003 the MC Closey Muller Satisfaction Questionnaire was administered to all the nurses in service in the wards. Levels of satisfaction of nurses with and without specific responsibilities were compared. The answers for each item are on a five points Likert scale. RESULTS: The questionnaire was administered to 1.167 nurses (58.9% of the nurses of the hospital); 602 were assigned positions with specific responsibilities. Overall, nurses with positions assigned were more satisfied (2.76 vs 2.61, p.0.01) and statistically significant differences were obtained for 14/31 items of the scale, and for 5/8 subscales. CONCLUSIONS: The results obtained, although the level of satisfaction is lower compared to other studies, confirm the strategy of professional development adopted in the Hospital. The analysis of results for each position allowed some reflections and to identify strategies to improve the organizational support to some positions.

Visible-light-mediated cleavage of polymer chains under physiological conditions via quinone photoreduction and trimethyl lock.

We introduce a click and visible-light triggered unclick approach via thio-bromo reaction and hydroquinone photoreduction/trimethyl lock cleavage for polymer modifications. Both reactions can be carried out in water and at ambient temperature, enabling preparation of bioorthogonal hydrogels for encapsulation and controlled release of various cells.

Garlic-inspired trisulfide linkers for thiol-stimulated H2S release.

Garlic-derived polysulfides (e.g., diallyl trisulfide, DATS) act as potent donors of the cell-signalling mediator H2S when exposed to endogenous thiols. Inspired by this chemistry, we incorporated a trisulfide linkage into a conjugate comprising an mPEG tail and a cholesteryl head via thiol-mediated fragmentation chemistry. The synthesized conjugate releases H2S upon exposure to thiol even at intracellular levels.