Finer Particle Size Distribution and Potential Higher Toxicity of Elemental Carbon and Polycyclic Aromatic Hydrocarbons Emitted by Ships after Fuel Oil Quality Improvement.

Ship emissions are a significant source of air pollution, and the primary policy to control is fuel oil quality improvement. However, the impact of this policy on particle size distribution and composition characteristics remains unclear. Measurements were conducted on nine different vessels (ocean-going vessels, coastal cargo ships, and inland cargo ships) to determine the impact of fuel upgrading (S < 0.1% m/m marine gas oil (MGO) vs S < 0.5% m/m heavy fuel oil (HFO)) on elemental carbon (EC) and polycyclic aromatic hydrocarbons (PAHs) emitted by ships. (1) Fuel improvement significantly reduced EC and PAH emission, by 31 ± 25 and 45 ± 38%, respectively. However, particle size distributions showed a trend toward finer particles, with the peak size decreasing from DP = 0.38-0.60 µm (HFO) to DP = 0.15-0.25 µm (MGO), and the emission factor of DP < 100 nm increased. (2) Changes in emission characteristics led to an increase in the toxicity of ultrafine particulate matter. (3) Ship types and engine conditions affected the EC and PAH particle size distributions. Inland ships have a more concentrated particle size distribution. Higher loads result in higher emissions. (4) The composition and engine conditions of fuel oils jointly affected pollutant formation mechanisms. MGO and HFO exhibited opposite EC emissions when emitting the same level of PAHs.

Whole genome resequencing reveal patterns of genetic variation within Colletotrichum acutatum species complex from rubber trees in China.

The Colletotrichum acutatum species complex possesses a diverse number of important traits, such as a wide host range and host preference, different modes of reproduction, and different strategies of host infection. Research using comparative genomics has attempted to find correlations between these traits. Here, we used multi-locus techniques and gene genealogical concordance analysis to investigate the phylogenetic relationships and taxonomic status of the Colletotrichum acutatum species complex using field isolates obtained from rubber trees. The results revealed that the dominant species was C. australisinense, followed by C. bannaense, while strain YNJH17109 was identified as C. laticiphilum. The taxonomic status of strains YNLC510 and YNLC511 was undetermined. Using whole-genome single nucleotide polymorphism data to analyze population structure, 18 strains of C. australisinense were subsequently divided into four populations, one of which was derived from an admixture of two populations. In addition, the strains LD1687, GD1628, and YNLC516, did not belong to any populations, and were considered to be admixtures of two or more populations. A split decomposition network analysis also provided evidence for genetic recombination within Colletotrichum acutatum species complex from rubber trees in China. Overall, a weak phylogeographic sub-structure was observed. Analysis also revealed significant differences in morphological characters and levels of virulence between populations.

Dominant Contribution of NO3 Radical to NO3- Formation during Heavy Haze Episodes: Insights from High-Time Resolution of Dual Isotopes Δ17O and δ18O.

δ18O is widely used to track nitrate (NO3-) formation but overlooks NO3 radical reactions with hydrocarbons (HCs), particularly in heavily emitting hazes. This study introduces high-time resolution Δ17O-NO3- as a powerful tool to quantify NO3- formation during five hazes in three cities. Results show significant differences between Δ17O-NO3- and δ18O-NO3- in identifying NO3- formation. δ18O-NO3- results suggested N2O5 hydrolysis (62.0-88.4%) as the major pathway of NO3- formation, while Δ17O-NO3- shows the NO3- formation contributions of NO2 + OH (17.7-66.3%), NO3 + HC (10.8-49.6%), and N2O5 hydrolysis (22.9-33.3%), revealing significant NO3 + HC contribution (41.7-56%) under severe pollution. Furthermore, NO3- formation varies with temperatures, NOx oxidation rate (NOR), and pollution levels. Higher NO2 + OH contribution and lower NO3 + HC contribution were observed at higher temperatures, except for low NOR haze where higher NO2 + OH contributions were observed at low temperatures (T ← 10 °C). This emphasizes the significance of NO2 + OH in emission-dominated haze. Contributions of NO2 + OH and NO3 + HC relate to NOR as positive (fP1 = 3.0*NOR2 - 2.4*NOR + 0.8) and negative (fP2 = -2.3*NOR2 + 1.8*NOR) quadratic functions, respectively, with min/max values at NOR = 0.4. At mild pollution, NO2 + OH (58.1 ± 22.2%) dominated NO3- formation, shifting to NO3 + HC (35.5 ± 16.3%) during severe pollution. Additionally, high-time resolution Δ17O-NO3- reveals that morning-evening rush hours and high temperatures at noon promote the contributions of NO3 + HC and NO2 + OH, respectively. Our results suggested that the differences in the NO3- pathway are attributed to temperatures, NOR, and pollution levels. Furthermore, high-time resolution Δ17O-NO3- is vital for quantifying NO3 + HC contribution during severe hazes.

Existence and Formation Pathways of High- and Low-Maturity Elemental Carbon from Solid Fuel Combustion by a Time-Resolved Study.

Elemental carbon (EC) from various sources contains different sub-fractions with different properties; however, this variability poses several challenges for the accurate assessment of EC emission inventory. EC is defined using thermo-optical analysis (TOA), and its different fractions have different maturation and formation pathways. High- and low-maturity ECs have similar detection signals to those of Soot-EC and Char-EC in TOA. The emission characteristics of Soot-EC and Char-EC were affected by fuel composition and combustion temperatures. Biomass combustion generated more Char-EC than coal combustion, resulting in lower Soot-EC to Char-EC ratios. Soot-EC emissions always increased with an increasing temperature. Char-EC emissions increased with an increasing temperature at 300-900 °C in biomass combustion and decreased in coal combustion when the temperature was >600 °C, suggesting that the two ECs have different formation pathways. Time-resolved analyses of organic carbon (OC), EC, and polycyclic aromatic hydrocarbons showed that Char-EC was preferentially generated in the ignition stage with the rapid emission of OC through direct conversion of OC, whereas Soot-EC was preferentially generated during the flaming stage through gas-phase polymerization of small molecules generated from the decomposition of OC.

Emission Characteristics and Formation Mechanism of Carbonyl Compounds from Residential Solid Fuel Combustion Based on Real-World Measurements and Tube-Furnace Experiments.

This study updated carbonyl compound (CC) emission factors (EFs) and composition for residential solid fuel combustion based on real-world measurements of 124 fuel/stove combinations in China and explored the CC formation mechanism using tube-furnace experiments with 19 fuels and low/high temperatures to explain the impact of fuel and stove on CC emission characteristics. The average EFCC values for straw, wood, and coal were 1.94 ± 1.57, 1.50 ± 0.88, and 0.40 ± 0.54 g/kg, respectively. Formaldehyde and acetaldehyde were the most abundant species, accounting for 40-60% of CCs, followed by acetone (∼20%), aromatic aldehydes (∼10%), and unsaturated aldehydes (∼5%). Different from formaldehyde and acetaldehyde, other species showed significant variation among fuel types. All these characteristics could be explained by the difference in the volatile content and chemical structure of fuel, such as aromatic in coal versus lignin in biomass. The improvement in stove technology reduced CC emissions by 30.4-69.7% (mainly formaldehyde and acetaldehyde) among fuels but increased the proportion of aromatic aldehydes by 24.3-89.4%. Various CC species showed different formation mechanisms related to fuel property and burning temperature. The volatile matter derived from thermal pyrolysis of fuel polymers determined CC composition, while higher temperature preferentially degraded formaldehyde and acetaldehyde but promoted the formation of acetone and aromatic aldehydes. This study not only revealed emission characteristic of CCs from RSFC but also contributed to the improvement of clean combustion technology.

Emission Characteristics and Formation Pathways of Intermediate Volatile Organic Compounds from Ocean-Going Vessels: Comparison of Engine Conditions and Fuel Types.

The lack of emission data for ocean-going vessels (OGVs) and the recent fuel switching make it urgent to enhance the onboard measurement of ship emissions, especially for intermediate volatile organic compounds (IVOCs). This study focused on the IVOC emission characteristics and formation pathways of three OGVs under various engine conditions (power and load) and fuel oils (heavy fuel oil (HFO) versus marine gas oil (MGO)). The results showed that the (1) IVOC emission factors (EFIVOC) of the three OGVs increased with engine power and were higher for MGO (1494.4 ± 421.7 mg/kg) than HFO (1830.5 ± 534.5 mg/kg) and engine load is an important parameter. (2) Engine load and oil type affect the composition and volatility distribution of IVOCs. The proportion of polycyclic aromatic hydrocarbons in IVOCs increased with a higher load, and using MGO shifted IVOC components to a higher volatility in contrast to HFO. (3) The compositions of IVOCs were more like those in fuel oils under low loads than under high loads, indicating that different formation pathways of IVOCs exist for different engine loads. (4) A higher EFIVOC was observed nearshore than in open sea owing to the lower and transient engine load, which indicates the necessity of paying attention to the IVOC emissions for ships.

Expression of CD123 Related Long Non-coding RNA in Acute Myeloid Leukemia Bone Marrow Mononuclear Cells and Its Clinical Significance.

Acute myelogenous leukemia (AML) is a very common hematopoietic malignancy. Hematopoietic stem cell transplantation can improve the therapeutic effect of AML, but the 5-year survival rate is very low. CD123 imbalance, abnormal gene expression, and epigenetics play an important role in the pathogenesis of AML. This research was to explore the differential expression of CD123-related long non-coding RNA (lncRNA) in AML bone marrow mononuclear cells and provide a theoretical basis for targeted therapy of AML. High-throughput sequencing was performed to screen differentially expressed lncRNA in bone marrow mononuclear immunophenotypes of CD123+ and CD123- from patients with primary AML, and real-time quantitative PCR was adopted for screening and validation. There were 933 differentially expressed lncRNAs in the CD123+ group and the CD123- group, 407 lncRNAs were up-regulated and 463 lncRNAs were down-regulated in the CD123+ group. 14 lncRNAs with more than 2 times of difference were screened for identification, and it was found that compared with CD123- group, there was no substantial difference in the expression of JHDM1D-AS1, LINC01355, CASC15, FAM13A-AS1, HSPC324, LOC339803, LINC00877, and MAG12-AS3 in CD123+ group (P>0.05). The expressions of LOC101929698, BaALC-AS2, BOLA3-AS1, and FBX19-AS1 were considerably up-regulated (P<0.05), while the expressions of LOC100132249 and LINC02085 were considerably down-regulated (P<0.05). In summary, differentially expressed lncRNAs in bone marrow samples of CD123+ and CD123- group of newly diagnosed AML patients may be involved in the process of AML and seriously affect the prognosis of patients.

Fuel Aromaticity Promotes Low-Temperature Nucleation Processes of Elemental Carbon from Biomass and Coal Combustion.

Significant elemental carbon (EC) emissions from low-temperature solid fuel combustion cannot be explained by classical mechanisms ascribing EC to higher-temperature condensation (> 850 °C). The importance of fuel composition in promoting EC nucleation was investigated by studying EC and polycyclic aromatic hydrocarbon (PAH) formation at multiple-ignition temperatures (300-900 °C) using fuels with different aromatic contents (i.e., straw, wood, and coal). Biomass and coal combustion at 300 °C can produce substantial EC containing a large amount of soot-EC, a known high-temperature condensation product, possibly because aromatics reduce EC nucleation barriers, corresponding to the increasing ratios of soot-EC to char-EC from straw to coal (1.22 to 3.61). High- to low-molecular-weight PAH ratios in biomass combustion were four times lower than those in coal combustion, resulting in different EC formation atmospheres. Specifically, 31.4% of PAHs from biomass combustion were indene, compared to only 0.24% for coal, indicating that resonance-stabilized hydrocarbon-radical chain reactions dominated EC nucleation in biomass combustion. Five- to six-membered PAH ratios were always higher than one in biomass combustion but increased significantly from 0.5 to 2 with increasing temperature in coal combustion, indicating that PAHs generated through aromatic decomposition in coal could form EC through van-der-Waals forces and phenyl addition/cyclization-based covalent bonding at low and high temperatures, respectively.

Intermediate Volatile Organic Compound Emissions from Residential Solid Fuel Combustion Based on Field Measurements in Rural China.

Residential solid fuel combustion (RSFC) is a key cause of air pollution in China. In these serial studies, field measurements of RSFC from 166 rural households in eastern China were conducted to update the database of emission factors (EFs) and chemical profiles of gaseous and particulate organic pollutants, and the present study focuses on the intermediate volatile organic compounds (IVOCs), which are precursors of secondary organic aerosol (SOA). The results show that the averaged EFs of IVOCs (EFIVOC) for crop straw, fuelwood, and coal are 550.7 ± 397.9, 416.1 ± 249.5, and 361.9 ± 308.0 mg/kg, respectively, which are among the EFIVOC of gasoline vehicle, diesel vehicle, non-road machinery, and heavy fuel oil vessel, and are significantly affected by fuel, stove, and combustion efficiency. The percentages of normal alkanes (n-alkanes), branched alkanes (b-alkanes), polycyclic aromatic hydrocarbons (PAHs), and unresolved complex mixture from RSFC are 3.5 ± 1.6, 8.0 ± 3.7, 17.6 ± 6.7, and 70.9 ± 8.1%, respectively, and the compositions are featured by lower b-alkanes and higher PAHs than those of vehicle sources. The proportions of some individual n-alkanes and PAHs (such as n-C12-n-C15, naphthalene, and its alkyl substituents) can be used as indicators to differentiate RSFC from vehicle sources, while methoxyphenols can be used to distinguish biomass burning from coal combustion. Based on China's energy statistics, the total IVOC emissions from RSFC in 2014 were 175.9 Gg. These data will help to update the IVOC emission inventory and improve the estimates of SOA production in China.

Knockdown of long non-coding RNA LINC00176 suppresses ovarian cancer progression by BCL3-mediated down-regulation of ceruloplasmin.

Ovarian cancer is a common malignancy among women with some clinically approved diagnostic coding gene biomarkers. However, long non-coding RNAs (lncRNAs) have been indicated to play an important role in controlling tumorigenesis of ovarian cancer. Hereby, the aim of the study was to uncover the function of lncRNA LINC00176 in the development and progression of ovarian cancer by regulating ceruloplasmin (CP). Bioinformatics prediction in combination with RT-qPCR analysis for the expression pattern of LINC00176 revealed that LINC00176 was highly expressed in ovarian cancer tissues as well as in ovarian cancer cell lines, respectively. LINC00176 was predominantly localized in the nucleus. Delivery of si-LINC00176, oe-LINC00176, si-BCL3 and si-CP plasmids was conducted to explore the effects of LINC00176 on ovarian cancer. Promoted proliferation, migration and invasion along with reduced apoptosis were observed in cells treated with oe-LINC00176, while si-BCL3 and si-CP were able to block the promoting effects. Investigations with regard to the correlation between LINC00176 and promoter region of CP turned out to be positive via B-cell CLL/lymphoma 3 (BCL3) by means of dual-luciferase reporter gene assay, ChIP and RIP assays. Furthermore, oncogenic properties of the LINC00176/BCL3/CP axis were also demonstrated by tumour formation in vivo generated upon injecting cells in nude mice. Our results demonstrate that restored LINC00176 initiates tumorigenesis in ovarian cancer by increasing CP expression via recruiting BCL3, the mechanism of which represented a potential and promising therapeutic target for the disease.

Expression, purification and characterization of a cold-adapted dextranase from marine bacteria and its ability to remove dental plaque.

Dental plaque is a high-incidence health concern, and it is caused by Streptococcus mutans. Dextranase can specifically hydrolyze ɑ-1,6-glycosidic linkages in dextran. It is commonly used in the sugar industry, in the production of plasma substitutes, and the treatment and prevention of dental plaque. In this research work, we successfully cloned and expressed a cold-adapted dextranase from marine bacteria Catenovulum sp. DP03 in Escherichia coli. The recombinant dextranase named Cadex2870 contained a 2511 bp intact open reading frame and encoded 836 amino acids. The expression condition of recombinant strain was 0.1 mM isopropylthio-galactoside (IPTG), and the reduced temperature was 16 °C. The purified enzyme activity was 16.2 U/mg. The optimal temperature and pH of Cadex2870 were 45 °C and pH 8, and it also had catalytic activity at 0 °C. The hydrolysates of Cadex2870 hydrolysis Dextran T70 are maltose, maltotetraose, maltopentose, maltoheptaose and higher molecular weight maltooligosaccharides. Interestingly, 0.5% sodium benzoate, 2% xylitol, 0.5% sodium fluoride, 5% propanediol, 5% glycerin and 2% sorbitol can enhance stability Cadex2870, which are additives in mouthwashes. Additionally, Cadex2870 reduced the formation of dental plaque and effectively degraded formed plaque. Therefore, Cadex2870 shows great promise in commercial applications.

First Report on Neopestalotiopsis aotearoa of Rubber Tree in China.

Natural rubber is an important industrial raw material and an economically important perennial in China. In recent years, A new leaf fall disease, caused by Neopestalotiopsis aotearoa Maharachch., K.D. Hyde & Crous, has occurred in Indonesia, Malaysia, Thailand, Sri Lanka, and other major rubber planting countries. In May and July of 2020, this disease was first found on 2-year-old rubber seedlings in two plantations located in Ledong and Baisha counties in Hainan Province, China. In the two plantations of approximately 32 ha, 15% of the rubber seedlings had the disease and the defoliation was more than 20%. The infected leaves turned yellow and watery, and dark brown and nearly round lesions of 1-2 mm in diameter were formed on the leaves. When the humidity was high, the center of the lesion was grey-white, and the lesions had many small black dots, black margins and surrounded by yellow halos. When the disease was severe, leaves fell off. To identify the pathogen, leaf tissues were collected from lesion margins after leaf samples were surface-sterilized in 75% ethanol, rinsed with sterile water for three times, and air dried. The leaf tissues were plated on potato dextrose agar (PDA) and incubated at 28°C for seven days. Fungal cultures with similar morphology were isolated from 90% of tested samples and two isolates (HNPeHNLD2001 and HNPeHNLD2002) were used in pathogenicity and molecular tests. Rubber leaves (clone PR107) were inoculated with conidial suspension (106 conidia/ml), and inoculated with PDA were used as the control, Each treatment had 3 leaves, and each leaf was inoculated with 3 spots and incubated at 28oC under high moisture conditions. Five days later, leaves inoculated with conidial suspension showed black leaf spots resembling the disease in the field, whereas the control leaves remained symptomless. The fungal cultures isolated from the inoculated tissues, had identical morphology compared with the initial isolates. Colonies on PDA were 55-60 mm in diameter after seven days at 28°C, with undulate edges, pale brown, thick mycelia on the surface with black, gregarious conidiomata; and the reverse side was similar in color. Black conidia were produced after eight days of culture on PDA. Conidia were fusoid, ellipsoid, straight to slightly curved, 4-septate, ranged from 18.35 to 27.12 µm (mean 22.34 µm) × 4.11 to 7.03 µm (mean 5.41 µm). The basal cells were conic with a truncate base, hyaline, rugose and thin-walled, 4.35 to 6.33 µm long (mean 4.72 µm). Three median cells were doliform, 12.53 to 18.97 µm long (mean 15.26 µm), hyaline, cylindrical to subcylindrical, thin- and smooth-walled, with 2-3 tubular apical appendages, arising from the apical crest, unbranched, filiform, 14.7 to 25.3 µm long (mean 19.94 µm). The basal appendages were singlar, tubular, unbranched, centric, 3.13 to 7.13 µm long (mean 5.48 µm). Morphological characteristics of the isolates were similar to the descriptions of N. aotearoa (Maharachchikumbura et al. 2014). The rDNA internal transcribed spacer (ITS) region, translation elongation factor 1-αgenes (TEF), and beta-tubulin (TUB2) gene were amplified using the primer pairs ITS1/ITS4, EF1-728F/EF1-986R and T1/Bt-2b (Pornsuriya et al. 2020), respectively. The sequences of these genes were deposited in GenBank (ITS Accession Nos.: MT764947 and MT764948; TUB2: MT796262 and MT796263; TEF: MT800516 and MT800517). According to the latest classification of Neoprostalotiopsis spp. (Maharachchikumbura et al. 2014) and multilocus phylogeny, isolates HNPeHNLD2001 and HNPeHNLD2002 were clustered in the same branch with N. aotearoa. Thus, the pathogen was identified as N. aotearoa, which is different from N. cubana and N. formicarum reported in Thailand (Pornsuriya et al. 2020; Thaochan et al. 2020). The Neopestalotiopsis leaf spotdisease of rubber tree (H. brasiliensis) was one of the most serious and destructive leaf diseases in major rubber planting countries in Asia. ( Tajuddin et al. 2020) The present study of leaf fall disease on rubber tree caused byN. aotearoa is the first report in China. The finding provides the basic pathogen information for further monitoring the disease and its control.

Nature and nurture: confluence of pathway determinism with metabolic and chemical serendipity diversifies Monascus azaphilone pigments.

Covering: up to June 2018 Understanding the biosynthetic mechanisms that generate the astounding structural complexity and variety of fungal secondary metabolites (FSMs) remains a challenge. As an example, the biogenesis of the Monascus azaphilone pigments (MonAzPs) has remained obscure until recently despite the significant medical potential of these metabolites and their long history of widespread use as food colorants. However, a considerable progress has been made in recent years towards the elucidation of MonAzPs biosynthesis in various fungi. In this highlight, we correlate a unified biosynthetic pathway with the diverse structures of the 111 MonAzPs congeners reported until June 2018. We also discuss the origins of structural diversity amongst MonAzPs analogues and summarize new research directions towards exploring novel MonAzPs. The case of MonAzPs illuminates the various ways that FSMs metabolic complexity emerges by the interplay of biosynthetic pathway determinism with metabolic and chemical serendipity.

The Marine Catenovulum agarivorans MNH15 and Dextranase: Removing Dental Plaque.

Dextranase, a hydrolase that specifically hydrolyzes α-1,6-glucosidic bonds, has been used in the pharmaceutical, food, and biotechnology industries. In this study, the strain of Catenovulum agarivorans MNH15 was screened from marine samples. When the temperature, initial pH, NaCl concentration, and inducer concentration were 30 °C, 8.0, 5 g/L, and 8 g/L, respectively, it yielded more dextranase. The molecular weight of the dextranase was approximately 110 kDa. The maximum enzyme activity was achieved at 40 °C and a pH of 8.0. The enzyme was stable at 30 °C and a pH of 5-9. The metal ion Sr2+ enhanced its activity, whereas NH4+, Co2+, Cu2+, and Li+ had the opposite effect. The dextranase effectively inhibited the formation of biofilm by Streptococcus mutans. Moreover, sodium fluoride, xylitol, and sodium benzoate, all used in dental care products, had no significant effect on dextranase activity. In addition, high-performance liquid chromatography (HPLC) showed that dextran was mainly hydrolyzed to glucose, maltose, and maltoheptaose. The results indicated that dextranase has high application potential in dental products such as toothpaste and mouthwash.

Real-World Emission Factors of Gaseous and Particulate Pollutants from Marine Fishing Boats and Their Total Emissions in China.

Pollutants from fishing boats have generally been neglected worldwide, and there is an acute shortage of measured emission data, especially in China. Therefore, on-board measurements of pollutants emitted from 12 different fishing boats in China (including gill net, angling, and trawler boats) were carried out in this study to investigate emission factors (EFs), characteristics and total emissions. The average EFs for CO2, CO, NO x, PM, and SO2 were 3074 ± 55.9, 50.6 ± 31.7, 54.2 ± 30.7, 9.54 ± 2.24, and 5.94 ± 6.38 g (kg fuel)-1, respectively, which were higher than those from previous studies of fishing boats. When compared to medium-speed and slow-speed engine vessels, high-speed engines on fishing boats had higher CO EFs but lower NO x EFs. Notably, when fishing boats were in low-load conditions, they always had higher EFs of CO, PM, and NO2 compared to other operating modes. The estimated results showed that emissions from motor-powered fishing boats in China in 2012 (232, 379, and 61.8 kt CO, NO x and PM) accounted for 10.7%, 10.9%, and 19.3% of the total CO, NO x and PM emitted from nonroad mobile sources, which means significant contribution of fishing boats to air pollution, especially in southern China areas.

High Time- and Size-Resolved Measurements of PM and Chemical Composition from Coal Combustion: Implications for the EC Formation Process.

Inefficient coal combustion is a significant source of elemental carbon (EC) air pollution in China, but there is a limited understanding of EC's formation processes. In this study, high time-resolved particle number size distributions (PNSDs) and size-resolved chemical compositions were obtained from the combustion of four bituminous coals burned in a quartz tube furnace at 500 and 800 °C. Based on the distinct characteristics of PNSD, the flaming stage was divided into the first-flaming stage (with a PNSD peak at 0.3-0.4 µm) and the second-flaming stage (with a PNSD peak at 0.1-0.15 µm). For the size-segregated EC and OC measurements, more soot-EC was observed in particles larger than 0.3 µm, whereas the smaller ones possessed more char-EC. The results indicated that gas-phase and direct-conversion EC generation mechanisms dominate different burning stages. The analysis of 16 parent PAHs showed more high-molecular-weight PAHs in the second-flaming stage particles, which supports the idea of different formation processes for char-EC and soot-EC. For all four coals, the PNSD and chemical compositions shared a similar trend, confirming that the different formation processes of EC in different flaming stages were common. This study provides novel information concerning EC formation.

[Effect of prone positioning on respiratory function in very preterm infants undergoing mechanical ventilation].

OBJECTIVE: To explore the effect of prone positioning on respiratory function in very preterm infants undergoing mechanical ventilation. METHODS: A total of 83 very preterm infants treated with mechanical ventilation were enrolled in the study and were randomly assigned to supine group and prone group. Four infants withdrew from the study and 79 infants completed treatment and observation (37 in the supine group and 42 in the prone group). Infants in both groups were mechanically ventilated in a volume assist-control mode. Infants in the prone group were ventilated in the supine position for 4 hours and in the prone position for 2 hours. Ventilator parameters, arterial blood gas analysis, and vital signs were recorded before grouping, every 6 hours in the supine group, and every hour after conversion into the prone position in the prone group, respectively. RESULTS: Fraction of inspired oxygen (FiO2), peak inspiratory pressure, mean inspiratory pressure, and duration of ventilation were significantly lower in the prone group than in the supine group (P<0.05); there were no significant differences in tidal volume or positive end-expiratory pressure between the two groups (P>0.05). The prone group had a significantly higher PO2/FiO2 ratio but significantly lower oxygenation index and respiratory rate than the supine group (P<0.05). There were no significant differences in arterial oxygen tension, pH, base excess, heart rate, or mean blood pressure between the two groups (P>0.05). CONCLUSIONS: Alternating ventilation between the prone position and supine position can improve oxygenation function, decrease the fraction of inspired oxygen, and shorten the duration of mechanical ventilation in very preterm infants undergoing mechanical ventilation.

Transcriptomic and Metabolomic Analyses of Soybean Protein Isolate on Monascus Pigments and Monacolin K Production.

Monascus pigments (MPs) and monacolin K (MK) are important secondary metabolites produced by Monascus spp. This study aimed to investigate the effect of soybean protein isolate (SPI) on the biosynthesis of MPs and MK based on the analysis of physiological indicators, transcriptomes, and metabolomes. The results indicated that the growth, yellow MPs, and MK production of Monascus pilosus MS-1 were significantly enhanced by SPI, which were 8.20, 8.01, and 1.91 times higher than that of the control, respectively. The utilization of a nitrogen source, protease activity, the production and utilization of soluble protein, polypeptides, and free amino acids were also promoted by SPI. The transcriptomic analysis revealed that the genes mokA, mokB, mokC, mokD, mokE, mokI, and mokH which are involved in MK biosynthesis were significantly up-regulated by SPI. Moreover, the glycolysis/gluconeogenesis, pyruvate metabolism, fatty acid degradation, tricarboxylic acid (TCA) cycle, and amino acid metabolism were effectively up-regulated by SPI. The metabolomic analysis indicated that metabolisms of amino acid, lipid, pyruvate, TCA cycle, glycolysis/gluconeogenesis, starch and sucrose, and pentose phosphate pathway were significantly disturbed by SPI. Thus, MPs and MK production promoted by SPI were mainly attributed to the increased biomass, up-regulated gene expression level, and more precursors and energies.

Unveiling the microbiota of sauce-flavor Daqu and its relationships with flavors and color during maturation.

This study investigated the microbial community in three-color sauce-flavor Daqu (black, yellow, and white) throughout their maturation processes, together with their physicochemical factors, culturable microbes, flavor components, and fermenting vitalities. Results from high-throughput sequencing revealed distinct microbial diversity, with more pronounced variations in bacterial community than in fungal community. Firmicutes and Ascomycota emerged as the most dominant bacterial and fungal phyla, respectively, during maturation. Genus-level analysis identified Kroppenstedia, Virgibacillus, and Bacillus as dominant bacteria in black Daqu, yellow Daqu, and white Daqu, severally, while Thermoascus was shared as the core dominant fungi for these Daqu. Physicochemical factors, particularly acidity, were found to exert a significant impact on microbial community. Kroppenstedtia was the key bacteria influencing the color formation of these Daqu. Furthermore, correlations between dominant microbes and flavor compounds highlighted their role in Daqu quality. Molds (Aspergillus, Rhizomucor, and Rhizopus), excepting Bacillus, played a crucial role in the formation of pyrazine compounds. Consequently, this study offers innovative insights into the microbial perspectives on color and pyrazine formation, establishing a groundwork for future mechanized Daqu production and quality control of sauce-flavor baijiu.

A therapy that modulates T lymphocyte subsets in patients infected with Epstein-Barr virus: Ganciclovir combined with interferon atomization inhalation.

To investigate the effect of ganciclovir combined with interferon atomization inhalation on T lymphocyte subsets in patients with Epstein-Barr virus (EBV) infection and its efficacy. Fifty patients with EBV infection who received ganciclovir combined with interferon atomization inhalation were selected as the observation group, and 50 healthy people were selected as the control group. The changes of T lymphocyte subsets in peripheral blood were detected by flow cytometry before treatment and at the 1st, 2nd, 3rd and 4th cycle after treatment. Before treatment, the CD3+, CD4+, CD4+/CD8+ indexes of the patients were significantly lower than those of the control group (P < .05), and the CD8+ level was significantly increased (P < .05). After one cycle of treatment, there was no significant difference in the changes of T lymphocyte subsets compared with those before treatment. After 2 and 3 cycles of treatment, CD3+, CD4+, CD4+/CD8+ values were higher than those before treatment (P > .05), and CD8+ index was lower than that before treatment (P < .05). After the 4th cycle of treatment, CD3+, CD4+, CD4+/CD8+ values were significantly improved (P < .05), and CD8+ index was significantly decreased (P < .05). Ganciclovir combined with interferon atomization inhalation can regulate the changes of T lymphocyte subsets in patients with EBV infection, improve the patient's condition, and has no obvious adverse reactions. Monitoring the changes of T lymphocyte subsets during treatment is more meaningful to predict the therapeutic effect of patients with EB virus infection.