Large area stimulated emission luminescent solar concentrators modelled using detailed balance consistent rate equations.

Stimulated emission luminescent solar concentrators (SELSCs) have the potential to reduce escape cone losses in luminescent solar concentrators (LSCs). However, a functional SELSC is yet to be demonstrated. Previous numerical studies and detailed balance limits provide guidance, but they also contradict and likely overestimate performance and underestimate requirements. In this work, we introduce a rate-equation model with inversion requirements compatible with detailed balance limits and apply this model to the numerical modelling of window-sized SELSCs. We find that the optimal pump photon energy for both LSCs and SELSCs is 1.35 eV and the potential improvement of SELSCs over LSCs is found to be 19.3%. The efficiencies found are much lower than those specified in previous work due to the increase in Stokes shift required for a highly luminescent material. We also find that SELSCs are more attractive at higher matrix losses, that emission linewidths <0.05  eV are desirable, and that SELSC devices can potentially achieve performance equal to LSCs at low illumination levels and simultaneously exceed it by up to 16.5% at 1-sun illumination.

Detailed balance limits for inversion in solar-pumped lasers and allied systems.

Solar-pumped lasers and optical amplifiers continue to draw research interest with advances in nanomaterials science and technology. Establishing accurate detailed balance limits for inversion in these systems is essential. In this Letter, we re-examine the threshold limits for inversion in broadband-pumped lasers, with reference to those provided by Roxlo and Yablonvitch [Opt. Lett.8, 271 (1983)OPLEDP0146-959210.1364/OL.8.000271], where they determined the minimum Stokes shift and the minimum ratio of pump band to emission band absorption constants-based on independent consideration of the emission at pump and emission frequencies. In contrast, the derivation here simultaneously accounts for emission in both the pump and emission bands, which in turn leads to a single consolidated inequality that serves to establish the revised threshold requirements for inversion. Upon applying this new unified relationship to solar-pumped devices, a large increase in the minimum required Stokes shifts for 1-sun devices, particularly at larger pump energies and smaller ratios of αp0/αe0, is found. The maximum possible efficiencies of solar-pumped devices are calculated using this new relation.

Patterned Optoelectronic Tweezers: A New Scheme for Selecting, Moving, and Storing Dielectric Particles and Cells.

Optical micromanipulation has become popular for a wide range of applications. In this work, a new type of optical micromanipulation platform, patterned optoelectronic tweezers (p-OET), is introduced. In p-OET devices, the photoconductive layer (that is continuous in a conventional OET device) is patterned, forming regions in which the electrode layer is locally exposed. It is demonstrated that micropatterns in the photoconductive layer are useful for repelling unwanted particles/cells, and also for keeping selected particles/cells in place after turning off the light source, minimizing light-induced heating. To clarify the physical mechanism behind these effects, systematic simulations are carried out, which indicate the existence of strong nonuniform electric fields at the boundary of micropatterns. The simulations are consistent with experimental observations, which are explored for a wide variety of geometries and conditions. It is proposed that the new technique may be useful for myriad applications in the rapidly growing area of optical micromanipulation.

Escape from an Optoelectronic Tweezer Trap: experimental results and simulations.

Optoelectronic tweezers (OET) are a microsystem actuation technology capable of moving microparticles at mm s-1 velocities with nN forces. In this work, we analyze the behavior of particles manipulated by negative dielectrophoresis (DEP) forces in an OET trap. A user-friendly computer interface was developed to generate a circular rotating light pattern to control the movement of the particles, allowing their force profiles to be conveniently measured. Three-dimensional simulations were carried out to clarify the experimental results, and the DEP forces acting on the particles were simulated by integrating the Maxwell stress tensor. The simulations matched the experimental results and enabled the determination of a new "hopping" mechanism for particle-escape from the trap. As indicated by the simulations, there exists a vertical DEP force at the edge of the light pattern that pushes up particles to a region with a smaller horizontal DEP force. We propose that this phenomenon will be important to consider for the design of OET micromanipulation experiments for a wide range of applications.

Waveguide photoreactor enhances solar fuels photon utilization towards maximal optoelectronic - photocatalytic synergy.

A conventional light management approach on a photo-catalyst is to concentrate photo-intensity to enhance the catalytic rate. We present a counter-intuitive approach where light intensity is distributed below the electronic photo-saturation limit under the principle of light maximization. By operating below the saturation point of the photo-intensity induced hydroxide growth under reactant gaseous H2+CO2 atmosphere, a coating of defect engineered In2O3-x(OH)y nanorod Reverse Water Gas Shift solar-fuel catalyst on an optical waveguide outperforms a coated plane by a factor of 2.2. Further, light distribution along the length of the waveguide increases optical pathlengths of the weakly absorptive green and yellow wavelengths, which increases CO product rate by a factor of 8.1-8.7 in the visible. Synergistically pairing with thinly doped silicon on the waveguide enhances the CO production rate by 27% over the visible. In addition, the persistent photoconductivity behavior of the In2O3-x(OH)y system enables CO production at a comparable rate for 2 h after turning off photo-illumination, enhancing yield with 44-62% over thermal only yield. The practical utility of persistent photocatalysis was demonstrated through outdoor solar concentrator tests, which after a day-and-night cycle showed CO yield increase of 19% over a day-light only period.