Asymmetric-absorption-induced spectral redshift in a monolithic III-nitride on-chip system.

Integrating optoelectronic devices with various functions into a monolithic chip is a popular research frontier. The top-down integration scheme on silicon-based III-nitride wafers has unique advantages. A monolithic III-nitride on-chip system with lighting source, electrical absorption modulator, waveguide and photodetector with the same structure were designed and fabricated to discover the asymmetry of photon emission and absorption in quantum well diode. The characteristics of the chip were characterized in detail and three different spectral redshifts were observed in the experiment. Results revealed that the asymmetric absorption causes spectral redshift in a quantum well diode, and self-absorption is a fundamental and universal phenomenon in quantum wells. This work provides an important reference for future III-nitride optoelectronic integration.

Self-regulation of light emission of an AlGaInP quantum well diode.

When an AlGaInP quantum well (QW) diode is biased with a forward voltage and illuminated with an external shorter-wavelength light beam, the diode is in a superposition state of both light emission and detection. The two different states take place simultaneously, and both the injected current and the generated photocurrent begin to mix. Here, we make use of this intriguing effect and integrate an AlGaInP QW diode with a programmed circuit. The AlGaInP QW diode with the dominant emission peak wavelength centered around 629.5 nm is excited by a 620-nm red-light source. The photocurrent is then extracted as a feedback signal to regulate the light emission of the QW diode in real time without an external or monolithically integrated photodetector, paving a feasible way to autonomously adjust the brightness of the QW diode for intelligent illumination in response to changes in the environmental light condition.

Miniature GaN optoelectronic temperature sensor.

The combination of plastic optical fiber (POF) with monolithically integrated transmitter and receiver is becoming increasingly attractive for the development of miniature optoelectronic sensing systems. Here, we propose a temperature sensing system by integrating a GaN optoelectronic chip with a POF and aluminum (Al) reflector. Owing to the overlap between electroluminescence and responsivity spectra of multiple quantum well (MQW) diodes, both the transmitter and the receiver having identical MQW structures are monolithically integrated on a tiny GaN chip by using the same fabrication process flow. Environmental temperature change leads to thermal deformation in the Al reflector, which reflects the transmitted light back with a light pulse. The reflected light is coupled into the guided POF again and sensed by the on-chip receiver. Finally, the temperature information is read out as electrical signals. When the ambient temperature changes from 20.1°C to 100°C, the optically induced electrical signal decreases from -3.04 µA to -3.13 µA. The results suggest that the monolithically integrated GaN device offers a promising option for optoelectronic temperature sensing systems.

Vertically stacked quantum well diodes for multifunctional applications.

Dual-functioning multiple quantum well (MQW) diodes can simultaneously transmit and receive information through visible light. Here, we report vertically stacked red, green, and blue (RGB) MQW diodes for light detection and display applications. Both blue and green MQW diodes are monolithically integrated with distributed Bragg reflector (DBR) filters to realize the separation of light. The versatile RGB MQW transmitter/receiver system not only creates full-color display but also effectively separates RGB light into various colors. These results open feasible routes to generate multifunctional device for the development of full-color display and light receiver.

Chip-integrated optical fiber magnetic field sensing system.

Lightweight, low-cost, and simple systems for magnetic field sensing are in high demand. Here, we demonstrate such a magnetic field sensing system by integrating a light source, detector, magnetic fluid (MF), and plastic optical fiber (POF). Two bifunctional AlGaInP diodes with identical multiple-quantum well structures separately function as the light source and the detector of the sensing system due to the partial overlap between the electroluminescence and responsivity spectra. Magnetic field sensing is realized by changing the amount of reflected light due to the change in reflection coefficient of the POF/MF interface caused by the ambient magnetic field. The chip-integrated POF magnetic field sensor exhibits a reliable operation with a detection range from 10 Gs to 400 Gs. The results indicate that the chip-integrated POF sensor is promising for magnetic field sensing.

Polypyrrole Cubosomes with Ordered Ultralarge Mesopore for Controllable Encapsulation and Release of Albumin.

Despite substantial progress in porous materials over past years, controllable preparation of conductive polymers (CPs) with continuous large pores is challenging, which are important for diverse applications, including energy storage, electrocatalysis, and biological separations. Here, we develop an unprecedented ordered bicontinuous mesoporous PPy cubosomes (mPPy-cs) using a soft-template strategy, resulting in ultralarge pores of ∼45 nm and high specific surface area of 69.5 m2 g-1. Along with their unique characteristics of adjustable surface charges and sensitivity to pH, mPPy-cs exhibited a near quantitative adsorption of albumin within 30 min, enabling efficient separation from immunoglobulin G, a typical inclusion in commercial albumin products. Moreover, the absorbed albumin could be further released in a controlled manner by lowering the pH. This work provides a feasible strategy for bottom-up construction of CPs with tailored pore sizes and nanoarchitectures, expected to attract significant attention to their properties and applications.

Tetranuclear CuII Cluster as the Ten Node Building Unit for the Construction of a Metal-Organic Framework for Efficient C2 H2 /CO2 Separation.

Rational design of high nuclear copper cluster-based metal-organic frameworks has not been established yet. Herein, we report a novel MOF (FJU-112) with the ten-connected tetranuclear copper cluster [Cu4 (PO3 )2 (µ2 -H2 O)2 (CO2 )4 ] as the node which was capped by the deprotonated organic ligand of H4 L (3,5-Dicarboxyphenylphosphonic acid). With BPE (1,2-Bis(4-pyridyl)ethane) as the pore partitioner, the pore spaces in the structure of FJU-112 were divided into several smaller cages and smaller windows for efficient gas adsorption and separation. FJU-112 exhibits a high separation performance for the C2 H2 /CO2 separation, which were established by the temperature-dependent sorption isotherms and further confirmed by the lab-scale dynamic breakthrough experiments. The grand canonical Monte Carlo simulations (GCMC) studies show that its high C2 H2 /CO2 separation performance is contributed to the strong π-complexation interactions between the C2 H2 molecules and framework pore surfaces, leading to its more C2 H2 uptakes over CO2 molecules.

Controlled Synthesis of Mesoporous π-Conjugated Polymer Nanoarchitectures as Anodes for Lithium-Ion Batteries.

Conjugated polymers possess better electron conductivity due to large π-electron conjugated configuration endowing them significant scientific and technological interest. However, the obvious deficiency of active-site underutilization impairs their electrochemical performance. Therefore, designing and engineering π-conjugated polymers with rich redox functional groups and mesoporous architectures could offer new opportunities for them in these emerging applications and further expand their application scopes. Herein, a series of 1,3,5-tris(4-aminophenyl) benzene (TAPB)-based π-conjugated mesoporous polymers (π-CMPs) are constructed by one-pot emulsion-induced interface assembly strategy. Furthermore, co-induced in situ polymerization on 2D interfaces by emulsion and micelles is explored, which delivers sandwiched 2D mesoporous π-CMPs-coated graphene oxides (GO@mPTAPB). Benefiting from specific redox-active functional groups, excellent electron conductivity and a 2D mesoporous conjugated framework, GO@mPTAPB exhibits high capability of accommodating Li+ anions (up to 382 mAh g-1 at 0.2 A g-1 ) and outstanding electrochemical stability (87.6% capacity retention after 1000 cycles). The ex situ Raman and impedance spectra are further applied to reveal the high reversibility of GO@mPTAPB. This work will greatly promote the development of advanced π-CMPs-based organic anodes toward energy storage devices.

Infection of Metarhizium anisopliae Ma6 and defense responses of host Phyllotreta striolata adults.

Entomopathogenic fungus as biological control agent plays a crucial role in the integrated management of insect pests. Metarhizium anisopliae Ma6 has been identified as a highly pathogenic strain against Phyllotreta striolata (Fabricius) (Coleoptera: Chrysomelidae), one of the most economically important and dominant insect pests damaging Brassica plants. The infection of M. anisopliae Ma6 on P. striolata was observed under stereomicroscopy and scanning electron microscopy (SEM), and biochemical defense responses of P. striolata adults after infection were investigated. The changes in total amino acids and free fatty acids, and the activities of protective enzymes, including catalase (CAT), peroxidase (POD), and superoxide dismutase (SOD), in P. striolata adults were measured. In stereomicroscopy and SEM observations, a large number of mycelia were observed on the body surface of P. striolata on the 5th day after treatment by M. anisopliae. Many conidia were germinated and covered the body of P. striolata on the 7th day after treatment. The free fatty acid, total amino acid, CAT, POD, and SOD activities all showed an increased and then decreased trend. These results suggest that entomopathogenic fungal infection triggers the defense response of hosts, which induces changes in nutrients and antioxidant enzymes in P. striolata adults. Our findings provide useful information for understanding the potential for using M. anisopliae Ma6 as a biocontrol agent.

Diblock copolymers directing construction of hierarchically porous metal-organic frameworks for enhanced-performance supercapacitors.

A rationally designed strategy is developed to synthesize hierarchically porous Fe-based metal-organic frameworks (P-Fe-MOF) via solution-based self-assembly of diblock copolymers. The well-chosen amphiphilic diblock copolymers (BCP) of polystyrene-block-poly(acrylic acid) (PS-b-PAA) exhibits outstanding tolerance capability of rigorous conditions (e.g. strong acidity or basicity, high temperature and pressure), steering the peripheral crystallization of Fe-based MOF by anchoring ferric ions with outer PAA block. Importantly, the introduction of BCP endows MOF materials with additional mesopores (∼40 nm) penetrating whole crystals, along with their inherent micropores and introduced macropores. The unique hierarchically porous architecture contributes to fast charge transport and electrolyte ion diffusion, and thus promotes their redox reaction kinetics processes. Accordingly, the resultant P-Fe-MOF material as a new electrode material for supercapacitors delivers the unprecedented highest specific capacitance up to 78.3 mAh g-1 at a current density of 1 A g-1, which is 9.8 times than that of Fe-based MOF/carbon nanotubes composite electrode reported previously. This study may inspire new design of porous metal coordination polymers and advanced electrode materials for energy storage and conversion field.

General Construction of 2D Ordered Mesoporous Iron-Based Metal-Organic Nanomeshes.

Nanomeshes with highly regular, permeable pores in plane, combining the exceptional porous architectures with intrinsic properties of 2D materials, have attracted increasing attention in recent years. Herein, a series of 2D ultrathin metal-organic nanomeshes with ordered mesopores is obtained by a self-assembly method, including metal phosphate and metal phosphonate. The resultant mesoporous ferric phytate nanomeshes feature unique 2D ultrathin monolayer morphologies (≈9 nm thickness), hexagonally ordered, permeable mesopores of ≈16 nm, as well as improved surface area and pore volume. Notably, the obtained ferric phytate nanomeshes can directly in situ convert into mesoporous sulfur-doped metal phosphonate nanomeshes by serving as an unprecedented reactive self-template. Furthermore, as advanced anode materials for Li-ion batteries, they deliver excellent capacity, good rate capability, and cycling performance, greatly exceeding the similar metal phosphate-based materials reported previously, resulting from their unique 2D ultrathin mesoporous structure. Therefore, the work will pave an avenue for constructing the other 2D ordered mesoporous materials, and thus offer new opportunities for them in diverse areas.

Pre-Polymerization Enables Controllable Synthesis of Nanosheet-Based Porphyrin Polymers towards High-Performance Li-Ion Batteries.

The precise regulation of nucleation growth and assembly of polymers is still an intriguing goal but an enormous challenge. In this study, we proposed a pre-polymerization strategy to regulate the assembly and growth of polymers by facilely controlling the concentration of polymerization initiator, and thus obtained two kinds of different nanosheet-based porphyrin polymer materials using tetrakis-5,10,15,20-(4-aminophenyl) porphyrin (TAPP) as the precursor. Notably, due to the π-π stacking and doping of TAPP during the preparation process, the obtained PTAPP-nanocube material exhibits a high intrinsic bulk conductivity reaching 1.49×10-4  S m-1 . Profiting from the large π-conjugated structure of porphyrin units, closely stacked layer structure and excellent conductivity, the resultant porphyrin polymers, as electrode materials for lithium ion batteries, deliver high specific capacity (≈650 mAh g-1 at the current density of 100 mA g-1 ), excellent rate performance and long-cycle stability, which are among the best reports of porphyrin polymer-based electrode materials for lithium-ion batteries, to the best of our knowledge. Therefore, such a pre-polymerization approach would provide a new insight for the controllable synthesis of polymers towards custom-made architecture and function.

Metabolic engineering of the regulators in nitrogen catabolite repression to reduce the production of ethyl carbamate in a model rice wine system.

Rice wine has been one of the most popular traditional alcoholic drinks in China. However, the presence of potentially carcinogenic ethyl carbamate (EC) in rice wine has raised a series of food safety issues. During rice wine production, the key reason for EC formation is urea accumulation, which occurs because of nitrogen catabolite repression (NCR) in Saccharomyces cerevisiae. NCR represses urea utilization by retaining Gln3p in the cytoplasm when preferred nitrogen sources are present. In order to increase the nuclear localization of Gln3p, some possible phosphorylation sites on the nuclear localization signal were mutated and the nuclear localization regulation signal was truncated, and the disruption of URE2 provided an additional method of reducing urea accumulation. By combining these strategies, the genes involved in urea utilization (DUR1,2 and DUR3) could be significantly activated in the presence of glutamine. During shake flask fermentations of the genetically modified strains, very little urea accumulated in the medium. Furthermore, the concentrations of urea and EC were reduced by 63% and 72%, respectively, in a model rice wine system. Examination of the normal nutrients in rice wine indicated that there were few differences in fermentation characteristics between the wild-type strain and the genetically modified strain. These results show that metabolic engineering of the NCR regulators has great potential as a method for eliminating EC during rice wine production.

Inclusion complex of turmeric essential oil with hydroxypropyl-ß-cyclodextrin: Preparation, characterization and release kinetics.

The application of turmeric essential oil (TEO), a natural effective antibacterial agent, in food preservation is limited due to high volatility and low stability. This study aimed to improve its stability and release behavior by synthesizing TEO/hydroxypropyl-ß-cyclodextrin (HP-ß-CD) inclusion complex (IC) in a saturated aqueous solution. An orthogonal experimental design was used to determine the optimal process conditions (HP-ß-CD to TEO, g/mL), 16:1; stirring speed, 850 r/min; encapsulation time, 2 h), achieving a comprehensive score value of 85.62% for TEO/HP-ß-CD-IC. Through comprehensive characterization, the results showed that TEO was completely embedded in HP-ß-CD with increased stability. Free TEO exhibited a weight loss of 67.64% between 30 and 300 °C, while TEO/HP-ß-CD-IC had a mass loss of only 9.33%. HP-ß-CD and TEO/HP-ß-CD-IC showed positive ZP values that were 124.76 mV and 132.16 mV, respectively. The release behavior and release kinetics of TEO/HP-ß-CD-ICs were also studied, and the results showed that TEO/HP-ß-CD-IC release rate increased under higher temperature and relative humidity-consistent with Fick's diffusion.

Sulfur-bridged bonds enabled structure modulation and space confinement of MnS for superior sodium-ion capacitors.

Manganese sulfide (MnS) is a promising converion-type anode for sodium storage, owing to the virtues of high theoretical capacity, coupled with it crustal abundance and cost-effectiveness. Nevertheless, MnS suffers from inadequate electronic conductivity, sluggish Na+ reaction kinetics and considerable volume variation during discharge/charge process, thereby impeding its rate capability and capacity retention. Herein, a novel lamellar heterostructured composite of Fe-doped MnS nanoparticles/positively charged reduced graphene oxide (Fe-MnS/PG) was synthesized to overcome these issues. The Fe-doping can accelerate the ion/electron transfer, endowing fast electrochemical kinetics of MnS. Meanwhile, the graphene space confinement with strong MnSC bond interactions can facilite the interfacial electron transfer, hamper volume expansion and aggregation of MnS nanoparticles, stabilizing the structural integrity, thus improving the Na+ storage reversibility and cyclic stability. Combining the synergistic effect of Fe-doping and space confinement with strong MnSC bond interactions, the as-produced Fe-MnS/PG anode presents a remarkable capacity of 567 mAh/g at 0.1 A/g and outstanding rate performance (192 mAh/g at 10 A/g). Meanwhile, the as-assembled sodium-ion capacitor (SIC) can yield a high energy density of 119 Wh kg-1 and a maximum power density of 17500 W kg-1, with capacity retention of 77 % at 1 A/g after 5000 cycles. This work offers a promising strategy to develop MnS-based practical SICs with high energy and long lifespan, and paves the way for fabricating advanced anode materials.

Functional response and predation rate of Cryptolaemus montrouzieri (Coleoptera: Coccinellidae) to Paracoccus marginatus (Hemiptera: Pseudococcidae) at different temperatures.

The ladybug, Cryptolaemus montrouzieri (Mulsant) (Coleoptera: Cocccinellidae)(Mulsant)(Coleoptera: Cocccinellidae), is a highly efficient predator in controlling mealybug populations and is considered an effective agent for controlling the papaya mealybugs (Paracoccus marginatus) (Williams & Granara de Willink) (Hemiptera: Pseudococcidae). Various criteria have been proposed for evaluating predator effectiveness, with the consumption rate of prey by individual predators, specifically the functional response, emerging as a common and crucial metric. This study evaluated the functional responses of third- and fourth-instar larvae, as well as male and female adults (<48 h old) of C. montrouzieri to adult females of P. marginatus at 3 different temperatures (22 °C, 28 °C, and 35 °C) with 70% ±â€…5% RH and a 12L:12D h photoperiod. Prey densities were 2, 4, 8, 16, 32, 45, or 60 papaya mealybugs per predator for all tests. The response to prey density by third- and fourth-instar larvae or both sexes of adult C. montrouzieri was a type II at all temperatures. The highest attack rate and lowest handling time were estimated at 28 °C in males and 35 °C in females, respectively. The highest daily prey consumption rate occurred at 35 °C in both the immature and adult stages of C. montrouzieri. These findings support the potential of C. montrouzieri in controlling the papaya mealybug, especially in tropical and subtropical regions, given its search efficiency at high temperatures tested in this study. However, additional field investigations are needed to ascertain the control efficacy of C. montrouzieri for this mealybug in biocontrol programs.

Nitrogen regulation involved in the accumulation of urea in Saccharomyces cerevisiae.

Rice wine is a popular traditional alcoholic drink with a long history in China. However, the presence of the potential carcinogen ethyl carbamate (EC) raises a series of food safety concerns. Although the metabolic pathway of urea (the major precusor of EC) has been characterized in Saccharomyces cerevisiae, the regulation of urea accumulation remains unclear, making the efficient elimination of urea difficult. To demonstrate the regulatory mechanisms governing urea accumulation, three key nitrogen sources that can inhibit urea utilization for a commercial S. cerevisiae strain were identified. In addition, regulators of nitrogen catabolite repression (NCR) and target of rapamycin (TOR) pathways were identified as being involved in urea accumulation by real-time quantitative PCR. Based on these results, preferred nitrogen sources were found to repress urea utilization by converting them to glutamine or glutamate. Moreover, the results indicated that the manner of urea metabolism regulation was different for two positive regulators involved in NCR; Gln3p can be retained in the cytoplasm by glutamine, while Gat1p can be retained by glutamine and glutamate. Furthermore, this was confirmed by fluorescence location detection. These new findings provide new targets for eliminating EC and other harmful nitrogen-containing compounds in fermented foods.

High-efficiency encapsulation of Pt nanoparticles into the channel of carbon nanotubes as an enhanced electrocatalyst for methanol oxidation.

Pt-based nanostructures serving as anode catalysts for the methanol oxidation reaction (MOR) have been widely studied for many years. Nevertheless, challenging issues such as poor reaction kinetics and the short-term stability of the MOR are the main drawbacks of such catalysts and limit their applications. Herein, we have developed a facile approach to encapsulate Pt nanoparticles (NPs) inside the nanochannels of porous carbon nanotubes (CNTs; Pt-in-CNTs) as a new enhanced electrocatalytic material. The as-prepared CNTs offer simultaneously ordered diffusion channels for ions and a confinement effect for the NPs, which both facilitate the promotion of catalytic kinetics and avoid the Ostwald ripening of Pt NPs, thus leading to high activity and durable cycle life as an anode catalyst for MOR. This work provides a new approach for enhancing the stability and activity by optimizing the structure of the catalyst, and the Pt-in-CNTs represent the most durable catalysts ever reported for MOR.

A novel method to fabricate discrete porous carbon hemispheres and their electrochemical properties as supercapacitors.

A simple and efficient method to produce discrete, hierarchical porous carbon hemispheres (CHs) with high uniformity has been successfully developed by constructing nanoreactors and using low crosslinked poly(styrene-co-divinylbenzene) (P(St-co-DVB)) capsules as precursors. The samples are characterized by scanning and transmission electron microscopy, Fourier transform infrared and Raman spectroscopy, X-ray diffraction, and N2 adsorption and desorption. Considering their application, the cyclic voltammetry and electrochemical impedance spectroscopy characterization are tested. The experimental results show that the achievement of discrete and perfect carbon hemispheres is dependent on the proper amount of DVB in the P(St-co-DVB) capsules, which can contribute to the ideal thickness or mechanical strength of the shells. When the amount of DVB is 35 wt% in the precursors, a high Brunauer-Emmett-Teller surface area of 676 m(2) g(-1) can be obtained for the carbon hemispheres, and the extremely large pore volume of 2.63 cm(3) g(-1) can also be achieved at the same time. The electrochemical test shows the carbon hemispheres have a higher specific capacitance of ca. 83 F g(-1) at 10 mV s(-1), compared to other carbon materials. So this method supplies a platform to extend the fabrication field of carbon materials and supplies more chances for the application of carbon materials including carbon hemispheres that are important components and substrates for supercapacitors.

Modifications to microplastics by potassium ferrate(VI): impacts on sorption and sinking capability in water treatment.

Pre-treatment (oxidation) may induce potential modifications to microplastics (MPs), further affecting their behaviors and removal efficiency in drinking water treatment plants. Herein, potassium ferrate(VI) oxidation was tested as a pre-treatment for MPs with four polymer types and three sizes each. Surface oxidation occurred with morphology destruction and oxidized bond generation, which were prosperous under low acid conditions (pH 3). As pH increased, the generation and attachment of nascent state ferric oxides (FexOx) gradually became dominant, making MP-FexOx complexes. These FexOx were identified as Fe(III) compounds, including Fe2O3 and FeOOH, firmly attaching to the MP surface. Using ciprofloxacin as the targeted organic contaminant, the presence of FexOx enhanced MP sorption dramatically, e.g., the kinetic constant Kf of ciprofloxacin raised from 0.206 (6.5 µm polystyrene) to 1.062 L g-1 (polystyrene-FexOx) after oxidation at pH 6. The sinking performance of MPs was enhanced, especially for small MPs (< 10 µm), which could be attributed to the increasing density and hydrophilicity. For instance, the sinking ratio of 6.5 µm polystyrene increased by 70% after pH 6 oxidation. In general, ferrate pre-oxidation possesses multiple enhanced removals of MPs and organic contaminants through adsorption and sinking, reducing the potential risk of MPs.