Incorporating ReS2 Nanosheet into ZnIn2S4 Nanoflower as Synergistic Z-Scheme Photocatalyst for Highly Effective and Stable Visible-Light-Driven Photocatalytic Hydrogen Evolution and Degradation.

Inspired by natural photosynthesis, the visible-light-driven Z-scheme system is very effective and promising for boosting photocatalytic hydrogen production and pollutant degradation. Here, a synergistic Z-scheme photocatalyst is constructed by coupling ReS2 nanosheet and ZnIn2S4 nanoflower and the experimental evidence for this direct Z-scheme heterostructure is provided by X-ray photoelectron spectroscopy, ultraviolet photoelectron spectroscopy, and electron paramagnetic resonance. Consequently, such a unique nanostructure makes this Z-scheme heterostructure exhibit 23.7 times higher photocatalytic hydrogen production than that of ZnIn2S4 nanoflower. Moreover, the ZnIn2S4/ReS2 photocatalyst is also very stable for photocatalytic hydrogen evolution, almost without activity decay even storing for two weeks. Besides, this Z-scheme heterostructure also exhibits superior photocatalytic degradation rates of methylene blue (1.7 × 10-2 min-1) and mitoxantrone (4.2 × 10-3 min-1) than that of ZnIn2S4 photocatalyst. The ultraviolet-visible absorption spectra, transient photocurrent spectra, open-circuit potential measurement, and electrochemical impedance spectroscopy reveal that the superior photocatalytic performance of ZnIn2S4/ReS2 heterostructure is mostly attributed to its broad and strong visible-light absorption, effective separation of charge carrier, and improved redox ability. This work provides a promising nanostructure design of a visible-light-driven Z-scheme heterostructure to simultaneously promote photocatalytic reduction and oxidation activity.

Facile Synthesis of Quinoline-Substituted 3-Hydroxy-2-oxindoles and 3-Amino-2-oxindoles via a Palladium-Catalyzed Cascade Intramolecular Cyclization/Intermolecular Nucleophilic Addition Reaction.

An efficient cascade intramolecular cyclization/intermolecular nucleophilic addition reaction of allenyl benzoxazinone with isatin or isatin-derived ketimine has been established by using Pd0-π-Lewis base catalysis. A series of 3-hydroxy-2-oxindoles and 3-amino-2-oxindoles with quaternary carbon atoms at the C3 position were synthesized in good yields under mild conditions through this protocol.

Visible-light Excited and Highly Photostable Organic Fluorophore with dual-state Emission.

Organic fluorophores with dual-state emission (DSE) are rare or difficult to observe because most of them display either aggregation-induced emission (AIE) or aggregation-caused quenching (ACQ). Amazing works have been accomplished, yet most of the DSE compounds were excited by UV light which limits their wide application in bioimaging. In this work, we achieved a visible-light excited DSE fluorophore and realized its imaging in SKOV-3 cells and zebrafish. The naphtho[2',3':4,5]imidazo[1,2-a]pyridine (NIP) core ensures its emission in dilute solution. Meanwhile, the twisted phenyl ring blocks fluorescence quenching induced by the π-π stacking and leads to the emission of the solid. The fluorescence intensity is steady even after 6 h of continuous intense sunlight. More importantly, photostability of NIP in cells is much better than commercial dye (mitochondrial green).

Simple and Commercially Available 6-chloroimidazo[1,2-a]pyridine-2-carboxylic Acid-based Fluorescent Probe for Monitoring pH Changes.

Commercially available compounds that can be directly used as fluorescent probes will greatly promote the development of fluorescent imaging. Based on our previously work related to nitrogen bridgehead heterocycles, herein, a commercially available compound, 6-chloroimidazo[1,2-a]pyridine-2-carboxylic acid, has been detected for monitoring pH value (3.0-7.0). The probe proves to have high selectivity and sensitivity, brilliant reversibility, and extremely short response time. The real-time imaging of pH changes in yeast was also conducted.

Exogenous tannic acid relieves imidacloprid-induced oxidative stress in tea tree by activating antioxidant responses and the flavonoid biosynthetic pathway.

Pesticide stress on plants is receiving increased scrutiny due to its effect on plant secondary metabolism and nutritional quality. Tannic acid (TA) is a natural polyphenolic compound showing excellent antioxidant properties and is involved in alleviating stress. The present study thoroughly investigated the effects and mechanism of exogenous TA on relieving imidacloprid (IMI) stress in tea plants. Our research found that TA(10 mg/L) activated the antioxidant defense system, enhanced the antioxidant ability, reduced the accumulation of ROS and membrane peroxidation, and notably promoted tea plant tolerance to imidacloprid stress. Additionally, TA boosted photosynthetic capacity, strengthened the accumulation of nutrients. regulated detoxification metabolism, and accelerated the digestion and metabolism of imidacloprid in tea plants. Furthermore, TA induced significant changes in 90 important metabolites in tea, targeting 17 metabolic pathways through extensively targeted metabolomics. Specifically, TA activated the flavonoid biosynthetic pathway, resulting in a 1.3- to 3.1-fold increase in the levels of 17 compounds and a 1.5- to 63.8-fold increase in the transcript level of related genes, such as ANR, LAR and CHS in this pathway. As a potential tea health activator, TA alleviates the oxidative damage caused by imidacloprid and improves the yield and quality of tea under pesticide stress.

An Imidazo[1,5-a]pyridine Benzopyrylium-Based NIR Fluorescent Probe with Ultra-Large Stokes Shifts for Monitoring SO2.

A mitochondria-targeted NIR probe based on the FRET mechanism was developed. It shows ultra-large Stokes shifts (460 nm) and emission shifts (285 nm). Furthermore, we also realized the imaging of SO2 in living SKOV-3 cells, zebrafish and living mice which may be useful for understanding the biological roles of SO2 in mitochondria and in vivo.

Improved photocatalytic activity and stability of black phosphorus/multi-walled carbon nanotube hybrid for RhB degradation.

Black phosphorus (BP) is a two-dimensional (2D) semiconductor that has recently attracted much interest due to its unique characteristics. However, BP is susceptible to oxidization under ambient conditions. In this work, a facile one-step route is presented, in which stable P-C bonds were formed by ball milling bulk BP and multi-walled carbon nanotubes (MWCNTs) mixture without any additives. The BP-MWCNTs hybrid and the milled BP (m-BP) were both dispersed in water under ambient conditions, and their optical absorbances were monitored. The resulting data showed that the absorbance value of the BP-MWCNTs hybrid decreased by 10.87% after 5 d, whereas the m-BP decreased by 59.21%. Surprisingly, the BP-MWCNTs hybrid also exhibited ultrahigh photocatalytic activity in the visible light range. Within 60 min of irradiation, the removal efficiency of rhodamine B (RhB) by the BP-MWCNTs hybrid reached 88.42%, which is four times higher than that of the bare m-BP. This improvement can be attributed to the formation of the P-C bond and the enhanced surface adsorption capacity resulting from the introduction of the MWCNTs, indicating that the utilization of the charges on the surface of the photocatalyst is further improved. In short, this study not only provides an easy method to synthesize the stable BP-based material for practical applications but also represents a new approach to enhance the photocatalytic activity of BP.

Coassembly Behavior and Rheological Properties of a ß-Hairpin Peptide with Dicarboxylates.

To understand the molecular interaction mechanism and develop peptide-based hydrogels, a ß-hairpin peptide CBHH was used as the model peptide, and its coassembly performance with succinic, malic, and tartaric dicarboxylates has been investigated with circular dichroism spectroscopy (CD) and atomic force microscopy (AFM). The rheological properties and cell culture performance of the coassembled hydrogels have also been assessed. The results showed that the dicarboxylates could induce the folding and self-assembly of the ß-hairpin peptide and promote its gelation at low pH. The effects of the dicarboxylates on peptide self-assembly and hydrogel properties were correlated to their hydroxyl group number. The toxicity of the hydrogel has been assessed with NIH-3T3 cells by MTT and Calcein-AM/PI experiments, and it was confirmed that the hydrogel was biocompatible and could be used as cell culture scaffolds. We hope that this study would provide a novel way for biomaterial fabrication in cell and tissue engineering.

Preparation of a Novel pH-responsive Fluorescent Probe Based on an Imidazo[1,2-a]indole Fluorophore and its Application in Detecting Extremely Low pH in Saccharomyces cerevisiae.

A novel pH-responsive probe based on an imidazo[1,2-a]indole fluorophore architecture is reported. The probe was highly selective to strongly acidic pH (pKa = 3.56) with high sensitivity and a fast response time (within 30 s). The probe did not demonstrate any fluorescence changes in the presence of interfering metal ions, and it featured excellent reversibility under strongly acidic conditions. The mechanism of detection of the probe was determined to be based on intramolecular charge transfer (ICT) at different pH. The probe was also able to be used for imaging for detecting acidic pH in Saccharomyces cerevisiae.

Confined growth of ordered organic frameworks at an interface.

Given their modular synthesis, unique structural features and rich functionality, structurally ordered covalent organic frameworks (COFs) and covalent monolayers have shown great potential in a broad range of applications, such as catalysis, molecular separation, energy storage, light harvesting, etc. The synthesis of COF thin films and covalent monolayers mainly utilizes dynamic covalent chemistry (DCvC), which relies on the reversible formation and breaking of rather strong covalent bonds within molecules under certain external stimuli. Such reversible reaction conditions enable a self-correction mechanism, which can selectively resolve defect sites leading to the formation of highly ordered COF films under thermodynamic control. Novel techniques to obtain single-layer covalent nanosheets have spread throughout recent literature. Emerging interfacial polymerization techniques (e.g., air-water, liquid-liquid, liquid-solid, etc.) have been employed to successfully synthesize crystalline COF thin films from a variety of starting building blocks. Although the growth of ordered frameworks at the interface represents a rapidly developing field, the reversible reactions suitable for the synthesis of thin films or monolayers are still very limited. The identification and development of new dynamic reactions and interfacial polymerization conditions would be critical for the further development of COF thin films and covalent monolayer materials. This review covers the recent design and synthesis of COF thin films and covalent monolayers as well as their property study. The fundamental working mechanisms of different surface and interfacial polymerization and the current challenges and opportunities in this rapidly growing field are presented.