A Tripartite Interaction among the Basidiomycete Rhodotorula mucilaginosa, N2-Fixing Endobacteria, and Rice Improves Plant Nitrogen Nutrition.

Nitrogen (N) limits crop yield, and improvement of N nutrition remains a key goal for crop research; one approach to improve N nutrition is identifying plant-interacting, N2-fixing microbes. Rhodotorula mucilaginosa JGTA-S1 is a basidiomycetous yeast endophyte of narrowleaf cattail (Typha angustifolia). JGTA-S1 could not convert nitrate or nitrite to ammonium but harbors diazotrophic (N2-fixing) endobacteria (Pseudomonas stutzeri) that allow JGTA-S1 to fix N2 and grow in a N-free environment; moreover, P. stutzeri dinitrogen reductase was transcribed in JGTA-S1 even under adequate N. Endobacteria-deficient JGTA-S1 had reduced fitness, which was restored by reintroducing P. stutzeri JGTA-S1 colonizes rice (Oryza sativa), significantly improving its growth, N content, and relative N-use efficiency. Endofungal P. stutzeri plays a significant role in increasing the biomass and ammonium content of rice treated with JGTA-S1; also, JGTA-S1 has better N2-fixing ability than free-living P. stutzeri and provides fixed N to the plant. Genes involved in N metabolism, N transporters, and NODULE INCEPTION-like transcription factors were upregulated in rice roots within 24 h of JGTA-S1 treatment. In association with rice, JGTA-S1 has a filamentous phase and P. stutzeri only penetrated filamentous JGTA-S1. Together, these results demonstrate an interkingdom interaction that improves rice N nutrition.

Codeployment of Passive Samplers and Mussels Reveals Major Source of Ongoing PCB Inputs to the Anacostia River in Washington, DC.

Remedial investigations of sites contaminated with legacy pollutants like polychlorinated biphenyls (PCBs) have traditionally focused on mapping sediment contamination to develop a site conceptual model and select remedy options. Ignoring dissolved concentrations that drive transport and bioaccumulation often leads to an incomplete assessment of ongoing inputs to the water column and overestimation of potential effectiveness of sediment remediation. Here, we demonstrate the utility of codeployment of passive equilibrium samplers and freshwater mussels as dual lines of evidence to identify ongoing sources of PCBs from eight main tributaries of the Anacostia River in Washington, DC, that has been historically polluted from industrial and other human activities. The freely dissolved PCB concentrations measured using passive samplers tracked well with the accumulation in mussels and allowed predictions of biouptake within a factor of 2 for total PCBs and a factor of 4 for most congeners. One tributary was identified as the primary source of PCBs to the water column and became a focus of additional ongoing investigations. Codeployment of passive samplers and mussels provides strong lines of evidence to refine site conceptual models and identify ongoing sources critical to control to achieve river water quality standards and reduce bioaccumulation in the aquatic food web.

Equilibrium Porewater Measurement of PCBs and PAHs Using Direct Water Extraction and Comparison with Passive Sampling.

The freely dissolved concentration of hydrophobic pollutants in sediment porewater (Cpw) is a critical driver for exposure to aquatic organisms, bioaccumulation, toxicity, and flux across interfaces. In this research, we compared direct porewater extraction and passive sampling for Cpw measurements of a range of PCBs and PAHs in field-collected sediments. The direct water extraction method provided accurate quantification of Cpw for low to moderately hydrophobic PCB and PAH compounds (log Kow < 6.5) that compared well with independent measurements performed using four passive sampling methods. Direct water extraction was adequate to assess narcosis toxicity of PAHs to benthic organisms that is driven by the concentrations of low to moderately hydrophobic PAHs (naphthalene to chrysene), even for a hypothetical sediment that had a tenth of the PAH concentrations of the study sediments and was assessed to be nontoxic. Prediction of PCB bioaccumulation in benthic organisms agreed within 50% for all measurement methods, but it was apparent that for less contaminated sediments, the direct water extraction method would likely have detection limit challenges, especially for the strongly hydrophobic PCBs. To address the uncertainty of the Cpw measurement of the strongly hydrophobic compounds and naphthalene, a new extrapolation approach is demonstrated that can be applicable for both direct water extraction and passive sampling methods.

Kinetics of PCB Microbial Dechlorination Explained by Freely Dissolved Concentration in Sediment Microcosms.

While microbial dechlorination of polychlorinated biphenyls (PCBs) has been observed in sediments over the last 3 decades, translation to the field has been difficult due to a lack of a clear understanding of the kinetic limitations. To address this issue, the present study used passive dosing/sampling to accurately measure the biological rate of dechlorination of 2,3,4,5-tetrachlorobiphenyl (PCB 61) to 2,3,5-trichlorobiphenyl (PCB 23) by an organohalide-respiring bacterium, Dehalobium chlorocoercia (DF-1). The biological rates were measured over an environmentally relevant concentration range of 1-50 ng/L of freely dissolved concentrations with and without the presence of sediment in bench-scale microcosm studies. The rate of dechlorination was found to be linearly dependent on the freely dissolved concentration of PCB 61 both in sediment and in sediment-free microcosms. The observed rate of dechlorination in sediment microcosms could be predicted within a factor of 2 based on the kinetics measured in sediment-free microcosms. A threshold for dechlorination was not observed down to an aqueous concentration of about 1 ng/L PCB 61. We demonstrate that with the combination of an accurate measurement of the aqueous-phase dechlorination kinetics and an understanding of the site-specific partitioning characteristics, it is possible to predict PCB microbial dechlorination in sediments.

A Pilot-Scale Field Study: In Situ Treatment of PCB-Impacted Sediments with Bioamended Activated Carbon.

A combined approach involving microbial bioaugmentation and enhanced sorption was demonstrated to be effective for in situ treatment of polychlorinated biphenyls (PCBs). A pilot study was conducted for 409 days on PCB impacted sediments in four 400 m2 plots located in a watershed drainage pond in Quantico, VA. Treatments with activated carbon (AC) agglomerate bioamended with PCB dechlorinating and oxidizing bacteria decreased the PCB concentration in the top 7.5 cm by up to 52% and the aqueous concentrations of tri- to nonachlorobiphenyl PCB congeners by as much as 95%. Coplanar congeners decreased by up to 80% in sediment and were undetectable in the porewater. There was no significant decrease in PCB concentrations in non-bioamended plots with or without AC. All homologue groups decreased in bioamended sediment and porewater, indicating that both anaerobic dechlorination and aerobic degradation occurred concurrently. The titer of the bioamendments based on quantitative PCR of functional marker genes decreased but were still detectable after 409 days, whereas indigenous microbial diversity was not significantly different between sites, time points, or depths, indicating that bioaugmentation and the addition of activated carbon did not significantly alter total microbial diversity. In situ treatment of PCBs using an AC agglomerate as a delivery system for bioamendments is particularly well-suited for environmentally sensitive sites where there is a need to reduce exposure of the aquatic food web to sediment-bound PCBs with minimal disruption to the environment.

Advancing the Use of Passive Sampling in Risk Assessment and Management of Sediments Contaminated with Hydrophobic Organic Chemicals: Results of an International Ex Situ Passive Sampling Interlaboratory Comparison.

This work presents the results of an international interlaboratory comparison on ex situ passive sampling in sediments. The main objectives were to map the state of the science in passively sampling sediments, identify sources of variability, provide recommendations and practical guidance for standardized passive sampling, and advance the use of passive sampling in regulatory decision making by increasing confidence in the use of the technique. The study was performed by a consortium of 11 laboratories and included experiments with 14 passive sampling formats on 3 sediments for 25 target chemicals (PAHs and PCBs). The resulting overall interlaboratory variability was large (a factor of ∼10), but standardization of methods halved this variability. The remaining variability was primarily due to factors not related to passive sampling itself, i.e., sediment heterogeneity and analytical chemistry. Excluding the latter source of variability, by performing all analyses in one laboratory, showed that passive sampling results can have a high precision and a very low intermethod variability (

Analysis of Measurement Errors in Passive Sampling of Porewater PCB Concentrations under Static and Periodically Vibrated Conditions.

Although the field of passive sampling to measure freely dissolved concentrations in sediment porewater has been sufficiently advanced for organic compounds in the low- to midrange of hydrophobicity, in situ passive sampling of strongly hydrophobic polychlorinated biphenyls (PCBs) is still challenged by slow approach to equilibrium. Periodic vibration of polyethylene (PE) passive samplers during exposure has been previously shown to enhance the mass transfer of polycyclic aromatic hydrocarbons (PAHs) from sediment into PE. Herein, we used a new vibrating platform, developed based on our earlier platform design, to demonstrate the effectiveness of periodic vibration for strongly hydrophobic compounds such as hexa-, hepta-, and octachloro-PCBs. Uptake of PCBs in PE after 7, 14, 28, and 56 days under different vibration modes was compared to that under static and mixed laboratory deployments. All PCBs reached within 95-100% of equilibrium after 56 days of deployment in the system vibrated briefly every 2 min, while none of the congeners achieved more than 50% of equilibrium in static deployment for the same period. Periodic vibration also increased the dissipation rate of four performance reference compounds (PRCs) from passive samplers. Higher fractional loss of PRCs and closer approach to equilibrium in the vibrated deployment resulted in estimation of corrected porewater concentrations that were statistically indistinguishable from the true equilibrium values even after a short 7-day deployment. Porewater concentrations of the strongly hydrophobic PCB congeners were overestimated by up to an order of magnitude in the static passive sampler after the same deployment time.

Mesocosm Studies on the Efficacy of Bioamended Activated Carbon for Treating PCB-Impacted Sediment.

This report describes results of a bench-scale treatability study to evaluate the efficacy of bioaugmentation with bioamended activated carbon (AC) for in situ treatment of polychlorinated biphenyl (PCB) impacted sediments. To this end, the ability of PCB transforming microorganisms to degrade and reduce the overall concentration of PCBs in sediment was determined in 2 L recirculating mesocosms designed to simulate conditions in Abraham's Creek in Quantico, Virginia. Ten sediment mesocosms were tested for the effects of AC alone, AC with slow release electron donor (cellulose) and different concentrations and combinations of PCB dehalogenating and degrading microorganisms added as bioamendments. A 78% reduction of total PCBs was observed using a cell titer of 5 × 105 Dehalobium chlorocoercia and Paraburkholderia xenovorans cells g-1 sediment with 1.5% AC as a delivery system. Levels of both higher and lower chlorinated congeners were reduced throughout the sediment column indicating that both anaerobic reductive dechlorination and aerobic degradation occurred concurrently. Porewater concentrations of all PCB homologues were reduced 94-97% for bioaugmented treatments. Toxicity associated with coplanar PCBs was reduced by 90% after treatment based on toxic equivalency of dioxin-like congeners. These results suggest that an in situ treatment employing the simultaneous application of anaerobic and aerobic microorganisms on AC could be an effective, environmentally sustainable strategy to reduce PCB levels in contaminated sediment.

Cross Validation of Two Partitioning-Based Sampling Approaches in Mesocosms Containing PCB Contaminated Field Sediment, Biota, and Activated Carbon Amendment.

The Gold Standard for determining freely dissolved concentrations (Cfree) of hydrophobic organic compounds in sediment interstitial water would be in situ deployment combined with equilibrium sampling, which is generally difficult to achieve. In the present study, ex situ equilibrium sampling with multiple thicknesses of silicone and in situ pre-equilibrium sampling with low density polyethylene (LDPE) loaded with performance reference compounds were applied independently to measure polychlorinated biphenyls (PCBs) in mesocosms with (1) New Bedford Harbor sediment (MA, U.S.A.), (2) sediment and biota, and (3) activated carbon amended sediment and biota. The aim was to cross validate the two different sampling approaches. Around 100 PCB congeners were quantified in the two sampling polymers, and the results confirmed the good precision of both methods and were in overall good agreement with recently published LDPE to silicone partition ratios. Further, the methods yielded Cfree in good agreement for all three experiments. The average ratio between Cfree determined by the two methods was factor 1.4 ± 0.3 (range: 0.6-2.0), and the results thus cross-validated the two sampling approaches. For future investigations, specific aims and requirements in terms of application, data treatment, and data quality requirements should dictate the selection of the most appropriate partitioning-based sampling approach.

In Situ Passive Sampling of Sediment Porewater Enhanced by Periodic Vibration.

Passive sampling for the measurement of freely dissolved concentrations of organic pollutants in sediment porewater has emerged as a promising approach, but in situ measurements are complicated by slow mass transfer of strongly hydrophobic compounds. The primary resistance to mass transfer arises in the sediment side where a concentration depletion layer develops in the vicinity of the polymeric passive sampling material. The slow mass transfer results in underequilibrated passive sampler measurements that need to be corrected for equilibrium, typically by extrapolation of the loss kinetics of performance reference compounds. Such corrections are prone to large errors, especially when deviation from equilibrium is large. In this research we address the challenge of slow mass transfer by disrupting the external depletion layer around an in situ passive sampler. We report an engineering innovation of adapting low-cost vibration motors for periodically disrupting the depletion layer in a passive sampler deployed in sediments. The uptake of 16 polycyclic aromatic hydrocarbons into polyethylene passive samplers was measured after 7, 14, 28, and 56 days of exposure to sediment under static, vibrating, and fully mixed modes. We demonstrate through laboratory experiments and numerical mass transfer modeling that short periodic shaking of a passive sampler deployed in static sediment enhances the rate of mass transfer and reduces the difference in the extent of equilibrium achieved compared to a well-mixed laboratory equilibrium. The improvement over static sediment deployment is especially evident for the high molecular weight compounds such as benzo(a)pyrene.

Effect of Polycyclic Aromatic Hydrocarbon Source Materials and Soil Components on Partitioning and Dermal Uptake.

The bioavailability of polycyclic aromatic hydrocarbons (PAHs) in soils can be influenced by the source material they are emitted within, the properties of the receiving soil, weathering processes, and the concentration of PAHs. In this study 30 contaminated soils were constructed with common PAH sources (fuel oil, soot, coal tar based skeet particles) and direct spike with a solvent added to different types and contents of soil organic matter and minerals to achieve PAH concentrations spanning 4 orders of magnitude. Source material had the greatest impact on PAH partitioning. Soils containing skeet generally exhibited the highest KD values, followed by soot, fuel oil, and solvent spiked soils. Among all soil compositions, the presence of 2% charcoal had the largest enhancement of KD. Partitioning behavior could not be predicted by an organic carbon and black carbon partitioning model. Including independently measured partitioning behavior of the soil components and PAH sources allowed better prediction but still suffered from issues of interaction (oil sorption in peat) and highly nonlinear partitioning with depletion (for skeet). Dermal absorption of PAHs measured using pig skin was directly related to the freely dissolved aqueous concentration in soil and not the total concentration in the soil. Overall, we show that PAH source materials have a dominating influence on partitioning, highlighting the importance of using native field soils in bioavailability and risk assessments.

Oral Bioavailability, Bioaccessibility, and Dermal Absorption of PAHs from Soil-State of the Science.

This article reviews the state of the science regarding oral bioavailability, bioaccessibility, and dermal absorption of carcinogenic polycyclic aromatic hydrocarbons (cPAHs) in soil by humans, and discusses how chemical interactions may control the extent of absorption. Derived from natural and anthropomorphic origins, PAHs occur in a limited number of solid and fluid matrices (i.e., PAH sources) with defined physical characteristics and PAH compositions. Existing studies provide a strong basis for establishing that oral bioavailability of cPAHs from soil is less than from diet, and an assumption of 100% relative bioavailability likely overestimates exposure to cPAHs upon ingestion of PAH-contaminated soil. For both the oral bioavailability and dermal absorption studies, the aggregate data do not provide a broad understanding of how different PAH source materials, PAH concentrations, or soil chemistries influence the absorption of cPAHs from soil. This article summarizes the existing studies, identifies data gaps, and provides recommendations for the direction of future research to support new default or site-specific bioavailability adjustments for use in human health risk assessment.

Effect of PCB Bioavailability Changes in Sediments on Bioaccumulation in Fish.

In situ sediment amendment with sorbents such as activated carbon (AC) can effectively reduce the bioavailability of hydrophobic organic chemicals such as polychlorinated biphenyls (PCBs). However, there is limited experimental or modeling assessment of how bioavailability changes in sediments impact bioaccumulation in fish - the primary risk driver for exposure to humans and top predators in the aquatic ecosystem. In the present study we performed laboratory aquarium experiments and modeling to explore how PCB sorption in sediments impacted exposure pathways and bioaccumulation in fish. Results showed that freely dissolved PCBs in porewater and overlying water measured by passive sampling were reduced by more than 95% upon amendment with 4.5% fine granular AC. The amendment also reduced the PCB uptake in fish by 87% after 90 days of exposure. Measured freely dissolved concentrations were incorporated in equilibrium and kinetic models for predicting uptake by fish. Predicted uptake using the kinetic model was generally within a factor of 2 for total PCBs measured in fish. The kinetic model output was most sensitive to overlying water PCBs, lipid fraction, and dissolved oxygen concentration (regulating gill ventilation). Our results indicate that by incorporating changes in freely dissolved PCB concentrations in bioaccumulation models it is possible to predict effectiveness of sediment remediation in reducing PCB uptake in fish.

Kinetics and threshold level of 2,3,4,5-tetrachlorobiphenyl dechlorination by an organohalide respiring bacterium.

The time required for a PCB-contaminated site to recover cannot yet be predicted due in part to lack of quantitative information on rates of PCB dechlorination in the porewater phase. We developed a method to measure rate of dechlorination in the aqueous phase at very low PCB concentrations. This approach utilizes a polymer functioning concurrently as a passive dosing system for maintaining a steady-state PCB substrate concentration in the water phase and as a passive equilibrium sampler to monitor the dechlorination product. Rates of dechlorination of 2,3,4,5-tetrachlorobiphenyl (PCB 61) to 2,3,5-trichlorobiphenyl (PCB 23) by an organohalide respiring bacterium, Dehalobium chlorocoercia DF-1, were measured over an environmentally relevant range of 1 to 500 ng L(-1) in sediment-free medium using a high concentration of cells (>10(6) cells mL(-1)). The results indicate that rate of dechlorination is a linear function of PCB substrate concentration below the maximum aqueous solubility of PCB 61 and occurs at concentrations as low as 1 ng L(-1). Demonstration of PCB 61 dechlorination at environmentally relevant concentrations suggests that low numbers of organohalide respiring bacteria rather than bioavailability accounts for low rates of dechlorination typically observed in sediments. Using passive samplers to measure the concentration of dissolved PCBs in the porewater combined with knowledge of congener-specific rates for organohalide respirer(s), it will be possible to project the in situ rate and final concentration of PCBs for a specific site after treatment by bioaugmentation.

Direct visualization of pyrene diffusion in polyethylene and polyoxymethylene passive samplers.

While passive sampling of ultra-low aqueous concentrations of hydrophobic organic compounds in environmental aqueous media has emerged as a promising analytical technique, there is a lack of good understanding of the fundamental diffusive processes. In this research, we used a fluorophore, pyrene, as a model compound to track diffusion in polymers through absorption and environmental media exchange processes. We directly tracked the penetration of pyrene into polyethylene (PE) and polyoxymethylene (POM) rods during absorption from water by sectioning the rod after different stages of absorption and observing the fluorescence signal through a microscope. Diffusion profiles of pyrene in polymers were simulated by numerical integration of Fickian diffusion. The results indicated that the uptake process in PE is governed by Fick's law and the absorption and desorption kinetics are similar in this polymer. However, the observed uptake profiles of pyrene in POM were non-Fickian and the release kinetics out of POM was slower compared to uptake into the polymer. We show that slower desorption from POM makes corrections for nonequilibrium using performance reference compounds (PRCs) problematic for deployments in water or sediment where there is significant advection. However, for static sediment deployments, the overall kinetics of exchange is controlled by slow transport through sediment and the hysteretic behavior of POM may not preclude the use of PRCs to interpret equilibrium status.

Evaluation of biochars and activated carbons for in situ remediation of sediments impacted with organics, mercury, and methylmercury.

In situ amendment of activated carbon (AC) to sediments can effectively reduce the bioavailability of hydrophobic organic contaminants. While biochars have been suggested as low-cost and sustainable alternatives to ACs, there are few comparative sorption data especially for mercury (Hg) and methylmercury (MeHg) at the low porewater concentrations in sediments. Here we compare the ability of a wide range of commercially available and laboratory synthesized ACs and biochars to sorb PAHs, PCBs, DDTs, inorganic Hg, and MeHg at environmentally relevant concentrations. Compared to natural organic matter, sorption capacity for most organic compounds was at least 1-2 orders of magnitude higher for unactivated biochars and 3-4 orders of magnitude higher for ACs which translated to sediment porewater PCB concentration reductions of 18-80% for unactivated biochars, and >99% for ACs with 5% by weight amendment to sediment. Steam activated carbons were more effective than biochars in Hg sorption and translated to modeled porewater Hg reduction in the range of 94-98% for sediments with low native Kd and 31-73% for sediments with high native Kd values for Hg. Unactivated biochars were as effective as the steam activated carbons for MeHg sorption. Predicted reductions of porewater MeHg were 73-92% for sediments with low native Kd and 57-86% for sediment with high native K(d). ACs with high surface areas therefore are likely to be effective in reducing porewater concentrations of organics, Hg, and MeHg in impacted sediments. Unactivated biochars had limited effectiveness for organics and Hg but can be considered when MeHg exposure is the primary concern.

Activated carbon mitigates mercury and methylmercury bioavailability in contaminated sediments.

There are few available in situ remediation options for Hg contaminated sediments, short of capping. Here we present the first tests of activated carbon and other sorbents as potential in situ amendments for remediation of mercury and methylmercury (MeHg), using a study design that combined 2 L sediment/water microcosms with 14 day bioaccumulation assays. Our key end points were pore water concentrations, and bioaccumulation of total Hg and MeHg by a deposit-feeding oligochaete Lumbriculus variegatus. Four amendments were tested: an activated carbon (AC); CETCO Organoclay MRM (MRM); Thiol-SAMMS (TS), a thiol-functionalized mesoporous silica; and AMBERSEP GT74, an ion-exchange resin. Amendments were tested in four separate microcosm assays using Hg-contaminated sediments from two freshwater and two estuarine sites. AC and TS amendments, added at 2-7% of the dry weight of sediments significantly reduced both MeHg concentrations in pore waters, relative to unamended controls (by 45-95%) and bioaccumulation of MeHg by Lumbriculus (by between 30 and 90%). Both amendments had only small impacts on microcosm surface water, sediment and pore water chemistry, with the exception of significant reductions in pore water dissolved organic matter. The effectiveness of amendments in reducing bioaccumulation was well-correlated with their effectiveness in increasing sediment:water partitioning, especially of MeHg. Sediments with low native sediment:water MeHg partition coefficients were most effectively treated. Thus, in situ sediment sorbent amendments may be able to reduce the risk of biotic Hg and MeHg uptake in contaminated sediments, and subsequent contamination of food webs.

Seasonal trends of PCBs in air over Washington DC reveal localized urban sources and the influence of Anacostia River.

Semi-volatile organic compounds like polychlorinated biphenyls (PCBs) undergo diffusive exchange flux between a water body and the overlying air. The magnitude of this exchange can be a substantial component of the overall pollutant mass balance and needs to be determined accurately to identify major pollutant sources to the water body and to plan appropriate remedies. For the PCB-impacted Anacostia River in Washington DC (USA), quantification of air-water exchange has been a major data gap. In the present study, polyethylene passive samplers were used to measure PCB concentrations in air phase at six locations in DC over a period of one year to capture spatial and seasonal variations. Concurrent water phase PCB measurements were used to quantify the direction and magnitude of air-water exchange in the Anacostia River. Two locations had nearly an order of magnitude higher air phase PCB concentrations that could be related to localized sources. Remaining four locations provided similar air phase PCB concentrations that averaged from 270 ± 44 pg/m3 (summer) to 32 ± 4.3 pg/m3 (winter). ∑PCB water-air exchange fluxes were positive across all seasons, with net PCB volatilization of 180 ± 19 g/year from the surface water. Volatilization rate was an order of magnitude lower than previously estimated from a fate and transport model. PCB load from atmospheric deposition based on previous studies in this watershed was an order of magnitude lower than the volatilization rate. Results refuted a long-standing understanding of the air phase serving as a source of PCBs to the river as per the currently approved Total Maximum Daily Load assessment. The study demonstrates the utility of passive air phase measurements in delineating local terrestrial sources of pollution as well as providing estimates for air-water exchange to complete a robust mass balance for semi-volatile pollutants in an urban river.

Advection dominated transport of polycyclic aromatic hydrocarbons in amended sediment caps.

Typical sand caps used for sediment remediation have little sorption capacity to retard the migration of hydrophobic contaminants such as PAHs that can be mobilized by significant groundwater flow. Laboratory column experiments were performed using contaminated sediments and capping materials from a creosote contaminated USEPA Superfund site. Azoic laboratory column experiments demonstrated rapid breakthrough of lower molecular weight PAHs when groundwater seepage was simulated through a column packed with coarse sand capping material. After eight pore volumes of flow, most PAHs measured showed at least 50% of initial source pore water concentrations at the surface of 65 cm capping material. PAH concentration in the cap solids was low and comparable to background levels typically seen in urban depositional sediment, but the pore water concentrations were high. Column experiments with a peat amendment delayed PAH breakthrough. The most dramatic result was observed for caps amended with activated carbon at a dose of 2% by dry weight. PAH concentrations in the pore water of the activated carbon amended caps were 3-4 orders of magnitude lower (0.04 ± 0.02 µg/L for pyrene) than concentrations in the pore water of the source sediments (26.2 ± 5.6 µg/L for pyrene) even after several hundred pore volumes of flow. Enhancing the sorption capacity of caps with activated carbon amendment even at a lower dose of 0.2% demonstrated a significant impact on contaminant retardation suggesting consideration of active capping for field sites prone to groundwater upwelling or where thin caps are desired to minimize change in bathymetry and impacts to aquatic habitats.