Consideration of within-patient diversity highlights transmission pathways and antimicrobial resistance gene variability in vancomycin-resistant Enterococcus faecium.

BACKGROUND: WGS is increasingly being applied to healthcare-associated vancomycin-resistant Enterococcus faecium (VREfm) outbreaks. Within-patient diversity could complicate transmission resolution if single colonies are sequenced from identified cases. OBJECTIVES: Determine the impact of within-patient diversity on transmission resolution of VREfm. MATERIALS AND METHODS: Fourteen colonies were collected from VREfm positive rectal screens, single colonies were collected from clinical samples and Illumina WGS was performed. Two isolates were selected for Oxford Nanopore sequencing and hybrid genome assembly to generate lineage-specific reference genomes. Mapping to closely related references was used to identify genetic variations and closely related genomes. A transmission network was inferred for the entire genome set using Phyloscanner. RESULTS AND DISCUSSION: In total, 229 isolates from 11 patients were sequenced. Carriage of two or three sequence types was detected in 27% of patients. Presence of antimicrobial resistance genes and plasmids was variable within genomes from the same patient and sequence type. We identified two dominant sequence types (ST80 and ST1424), with two putative transmission clusters of two patients within ST80, and a single cluster of six patients within ST1424. We found transmission resolution was impaired using fewer than 14 colonies. CONCLUSIONS: Patients can carry multiple sequence types of VREfm, and even within related lineages the presence of mobile genetic elements and antimicrobial resistance genes can vary. VREfm within-patient diversity could be considered in future to aid accurate resolution of transmission networks.

Tuberculosis Treatment Monitoring and Outcome Measures: New Interest and New Strategies.

Despite the advent of new diagnostics, drugs and regimens, tuberculosis (TB) remains a global public health threat. A significant challenge for TB control efforts has been the monitoring of TB therapy and determination of TB treatment success. Current recommendations for TB treatment monitoring rely on sputum and culture conversion, which have low sensitivity and long turnaround times, present biohazard risk, and are prone to contamination, undermining their usefulness as clinical treatment monitoring tools and for drug development. We review the pipeline of molecular technologies and assays that serve as suitable substitutes for current culture-based readouts for treatment response and outcome with the potential to change TB therapy monitoring and accelerate drug development.

Tuberculosis Molecular Bacterial Load Assay Reveals Early Delayed Bacterial Killing in Patients With Relapse.

Bacterial killing in patients with tuberculosis (TB) relapse was compared to that in patients achieving cure, measured by TB molecular bacterial load assay (TB-MBLA) or mycobacteria growth indicator tube (MGIT) time to positivity (TTP). TB-MBLA in 4 relapsed patients was significantly different compared to 132 cured patients after 2 weeks of treatment; MGIT TTP showed a significant difference from week 8.

Target product profiles: tests for tuberculosis treatment monitoring and optimization.

The World Health Organization has developed target product profiles containing minimum and optimum targets for key characteristics for tests for tuberculosis treatment monitoring and optimization. Tuberculosis treatment optimization refers to initiating or switching to an effective tuberculosis treatment regimen that results in a high likelihood of a good treatment outcome. The target product profiles also cover tests of cure conducted at the end of treatment. The development of the target product profiles was informed by a stakeholder survey, a cost-effectiveness analysis and a patient-care pathway analysis. Additional feedback from stakeholders was obtained by means of a Delphi-like process, a technical consultation and a call for public comment on a draft document. A scientific development group agreed on the final targets in a consensus meeting. For characteristics rated of highest importance, the document lists: (i) high diagnostic accuracy (sensitivity and specificity); (ii) time to result of optimally ≤ 2 hours and no more than 1 day; (iii) required sample type to be minimally invasive, easily obtainable, such as urine, breath, or capillary blood, or a respiratory sample that goes beyond sputum; (iv) ideally the test could be placed at a peripheral-level health facility without a laboratory; and (v) the test should be affordable to low- and middle-income countries, and allow wide and equitable access and scale-up. Use of these target product profiles should facilitate the development of new tuberculosis treatment monitoring and optimization tests that are accurate and accessible for all people being treated for tuberculosis.

L'Organisation mondiale de la santé a élaboré des profils de produits cibles contenant des cibles minimales et optimales pour les caractéristiques principales des essais destinés au suivi et à l'optimisation du traitement de la tuberculose. L'optimisation du traitement de la tuberculose fait référence à l'instauration d'un régime de traitement efficace de la tuberculose ou à l'adoption d'un tel régime, avec une probabilité élevée d'obtenir de bons résultats thérapeutiques. Les profils de produits cibles couvrent également les essais de guérison effectués à l'issue du traitement. Les profils de produits cibles ont été élaborés sur la base d'un sondage auprès des parties prenantes, d'une analyse coût-efficacité et d'une analyse du parcours de soins du patient. Des retours supplémentaires des parties prenantes ont été obtenus au moyen d'un processus créé selon la méthode Delphi, d'une consultation technique et d'un appel à commentaires publics sur un projet de document. Un groupe d'élaboration scientifique s'est mis d'accord sur les objectifs finaux lors d'une réunion de concertation. En ce qui concerne les caractéristiques jugées les plus importantes, le document énumère ce qui suit: (i) une grande précision diagnostique (sensibilité et spécificité); (ii) un délai idéal d'obtention des résultats ≤ 2 heures et au maximum de 1 jour; (iii) le type d'échantillon requis doit être peu invasif et facile à obtenir, comme l'urine, l'haleine ou le sang capillaire, ou bien un échantillon respiratoire au-delà des expectorations; (iv) idéalement, l'essai pourrait avoir lieu dans un établissement de santé périphérique sans laboratoire ; et (v) l'essai devrait être abordable pour les pays à revenu faible et intermédiaire et permettre un accès large et équitable ainsi qu'une mise à l'échelle. L'utilisation de ces profils de produits cibles devrait faciliter la mise au point de nouveaux essais de surveillance et d'optimisation du traitement de la tuberculose qui soient précis et accessibles à toutes les personnes suivant un traitement pour la tuberculose.

La Organización Mundial de la Salud ha elaborado perfiles de productos objetivo que contienen objetivos mínimos y óptimos para las características principales de las pruebas de seguimiento y optimización del tratamiento de la tuberculosis. La optimización del tratamiento de la tuberculosis consiste en iniciar o cambiar a un régimen eficaz de tratamiento de la tuberculosis que ofrezca una alta probabilidad de un buen resultado terapéutico. Los perfiles de productos objetivo también abarcan las pruebas de curación realizadas al final del tratamiento. La elaboración de los perfiles de los productos objetivo se basó en una encuesta a las partes interesadas, un análisis de rentabilidad y un análisis de la vía de atención al paciente. Se obtuvo información adicional de las partes interesadas mediante un proceso tipo Delphi, una consulta técnica y una convocatoria de comentarios públicos sobre un borrador del documento. Un grupo de desarrollo científico acordó los objetivos finales en una reunión de consenso. Para las características clasificadas de mayor importancia, el documento enumera: (i) alta precisión diagnóstica (sensibilidad y especificidad); (ii) tiempo hasta el resultado de óptimamente ≤ 2 horas y no más de 1 día; (iii) el tipo de muestra requerida debe ser mínimamente invasiva, fácil de obtener, como orina, aliento o sangre capilar, o una muestra respiratoria que vaya más allá del esputo; (iv) idealmente la prueba podría realizarse en un centro sanitario periférico sin laboratorio; y (v) la prueba debe ser asequible para los países de ingresos bajos y medios y permitir un acceso amplio y equitativo y su expansión. El uso de estos perfiles de producto objetivo debería facilitar el desarrollo de pruebas nuevas de seguimiento y optimización del tratamiento de la tuberculosis que sean precisas y accesibles para todas las personas que reciben tratamiento antituberculoso.

Unravelling patient pathways in the context of antibacterial resistance in East Africa.

BACKGROUND: A key factor driving the development and maintenance of antibacterial resistance (ABR) is individuals' use of antibiotics (ABs) to treat illness. To better understand motivations and context for antibiotic use we use the concept of a patient treatment-seeking pathway: a treatment journey encompassing where patients go when they are unwell, what motivates their choices, and how they obtain antibiotics. This paper investigates patterns and determinants of patient treatment-seeking pathways, and how they intersect with AB use in East Africa, a region where ABR-attributable deaths are exceptionally high. METHODS: The Holistic Approach to Unravelling Antibacterial Resistance (HATUA) Consortium collected quantitative data from 6,827 adult outpatients presenting with urinary tract infection (UTI) symptoms in Kenya, Tanzania, and Uganda between February 2019- September 2020, and conducted qualitative in-depth patient interviews with a subset (n = 116). We described patterns of treatment-seeking visually using Sankey plots and explored explanations and motivations using mixed-methods. Using Bayesian hierarchical regression modelling, we investigated the associations between socio-demographic, economic, healthcare, and attitudinal factors and three factors related to ABR: self-treatment as a first step, having a multi-step treatment pathway, and consuming ABs. RESULTS: Although most patients (86%) sought help from medical facilities in the first instance, many (56%) described multi-step, repetitive treatment-seeking pathways, which further increased the likelihood of consuming ABs. Higher socio-economic status patients were more likely to consume ABs and have multi-step pathways. Reasons for choosing providers (e.g., cost, location, time) were conditioned by wider structural factors such as hybrid healthcare systems and AB availability. CONCLUSION: There is likely to be a reinforcing cycle between complex, repetitive treatment pathways, AB consumption and ABR. A focus on individual antibiotic use as the key intervention point in this cycle ignores the contextual challenges patients face when treatment seeking, which include inadequate access to diagnostics, perceived inefficient public healthcare and ease of purchasing antibiotics without prescription. Pluralistic healthcare landscapes may promote more complex treatment seeking and therefore inappropriate AB use. We recommend further attention to healthcare system factors, focussing on medical facilities (e.g., accessible diagnostics, patient-doctor interactions, information flows), and community AB access points (e.g., drug sellers).

Presence of optrA-mediated linezolid resistance in multiple lineages and plasmids of Enterococcus faecalis revealed by long read sequencing.

Transferable linezolid resistance due to optrA, poxtA, cfr and cfr-like genes is increasingly detected in enterococci associated with animals and humans globally. We aimed to characterize the genetic environment of optrA in linezolid-resistant Enterococcus faecalis isolates from Scotland. Six linezolid-resistant E. faecalis isolated from urogenital samples were confirmed to carry the optrA gene by PCR. Short read (Illumina) sequencing showed the isolates were genetically distinct (>13900 core SNPs) and belonged to different MLST sequence types. Plasmid contents were examined using hybrid assembly of short and long read (Oxford Nanopore MinION) sequencing technologies. The optrA gene was located on distinct plasmids in each isolate, suggesting that transfer of a single plasmid did not contribute to optrA dissemination in this collection. pTM6294-2, BX5936-1 and pWE0438-1 were similar to optrA-positive plasmids from China and Japan, while the remaining three plasmids had limited similarity to other published examples. We identified the novel Tn6993 transposon in pWE0254-1 carrying linezolid (optrA), macrolide (ermB) and spectinomycin [ANT(9)-Ia] resistance genes. OptrA amino acid sequences differed by 0-20 residues. We report multiple variants of optrA on distinct plasmids in diverse strains of E. faecalis. It is important to identify the selection pressures driving the emergence and maintenance of resistance against linezolid to retain the clinical utility of this antibiotic.

Increased bactericidal activity but dose-limiting intolerability at 50†mg·kg-1 rifampicin.

BACKGROUND: Accumulating data indicate that higher rifampicin doses are more effective and shorten tuberculosis (TB) treatment duration. This study evaluated the safety, tolerability, pharmacokinetics, and 7- and 14-day early bactericidal activity (EBA) of increasing doses of rifampicin. Here we report the results of the final cohorts of PanACEA HIGHRIF1, a dose escalation study in treatment-naive adult smear-positive patients with TB. METHODS: Patients received, in consecutive cohorts, 40 or 50 mg·kg-1 rifampicin once daily in monotherapy (day 1-7), supplemented with standard dose isoniazid, pyrazinamide and ethambutol between days 8 and 14. RESULTS: In the 40 mg·kg-1 cohort (n=15), 13 patients experienced a total of 36 adverse events during monotherapy, resulting in one treatment discontinuation. In the 50 mg·kg-1 cohort (n=17), all patients experienced adverse events during monotherapy, 93 in total; 11 patients withdrew or stopped study medication. Adverse events were mostly mild/moderate and tolerability rather than safety related, i.e. gastrointestinal disorders, pruritis, hyperbilirubinaemia and jaundice. There was a more than proportional increase in the rifampicin geometric mean area under the plasma concentration-time curve from time 0 to 12 h (AUC0-24 h) for 50 mg·kg-1 compared with 40 mg·kg-1; 571 (range 320-995) versus 387 (range 201-847) mg·L-1·h, while peak exposures saw proportional increases. Protein-unbound exposure after 50 mg·kg-1 (11% (range 8-17%)) was comparable with lower rifampicin doses. Rifampicin exposures and bilirubin concentrations were correlated (Spearman's ρ=0.670 on day 3, p<0.001). EBA increased considerably with dose, with the highest seen after 50 mg·kg-1: 14-day EBA -0.427 (95% CI -0.500- -0.355) log10CFU·mL-1·day-1. CONCLUSION: Although associated with an increased bactericidal effect, the 50 mg·kg-1 dose was not well tolerated. Rifampicin at 40 mg·kg-1 was well tolerated and therefore selected for evaluation in a phase IIc treatment-shortening trial.

Mycobactericidal Effects of Different Regimens Measured by Molecular Bacterial Load Assay among People Treated for Multidrug-Resistant Tuberculosis in Tanzania.

Rifampin or multidrug-resistant tuberculosis (RR/MDR-TB) treatment has largely transitioned to regimens free of the injectable aminoglycoside component, despite the drug class' purported bactericidal activity early in treatment. We tested whether Mycobacterium tuberculosis killing rates measured by tuberculosis molecular bacterial load assay (TB-MBLA) in sputa correlate with composition of the RR/MDR-TB regimen. Serial sputa were collected from patients with RR/MDR- and drug-sensitive TB at days 0, 3, 7, and 14, and then monthly for 4 months of anti-TB treatment. TB-MBLA was used to quantify viable M. tuberculosis 16S rRNA in sputum for estimation of colony forming units per ml (eCFU/ml). M. tuberculosis killing rates were compared among regimens using nonlinear-mixed-effects modeling of repeated measures. Thirty-seven patients produced 296 serial sputa and received treatment as follows: 13 patients received an injectable bedaquiline-free reference regimen, 9 received an injectable bedaquiline-containing regimen, 8 received an all-oral bedaquiline-based regimen, and 7 patients were treated for drug-sensitive TB with conventional rifampin/isoniazid/pyrazinamide/ethambutol (RHZE). Compared to the adjusted M. tuberculosis killing of -0.17 (95% confidence interval [CI] -0.23 to -0.12) for the injectable bedaquiline-free reference regimen, the killing rates were -0.62 (95% CI -1.05 to -0.20) log10 eCFU/ml for the injectable bedaquiline-containing regimen (P = 0.019), -0.35 (95% CI -0.65 to -0.13) log10 eCFU/ml for the all-oral bedaquiline-based regimen (P = 0.054), and -0.29 (95% CI -0.78 to +0.22) log10 eCFU/ml for the RHZE regimen (P = 0.332). Thus, M. tuberculosis killing rates from sputa were higher among patients who received bedaquiline but were further improved with the addition of an injectable aminoglycoside.

Tuberculosis bacillary load, an early marker of disease severity: the utility of tuberculosis Molecular Bacterial Load Assay.

In this comparative biomarker study, we analysed 1768 serial sputum samples from 178 patients at 4 sites in Southeast Africa. We show that tuberculosis Molecular Bacterial Load Assay (TB-MBLA) reduces time-to-TB-bacillary-load-result from days/weeks by culture to hours and detects early patient treatment response. By day 14 of treatment, 5% of patients had cleared bacillary load to zero, rising to 58% by 12th week of treatment. Fall in bacillary load correlated with mycobacterial growth indicator tube culture time-to-positivity (Spearmans r=-0.51, 95% CI (-0.56 to -0.46), p<0.0001). Patients with high pretreatment bacillary burdens (above the cohort bacillary load average of 5.5log10eCFU/ml) were less likely to convert-to-negative by 8th week of treatment than those with a low burden (below cohort bacillary load average), p=0.0005, HR 3.1, 95% CI (1.6 to 5.6) irrespective of treatment regimen. TB-MBLA distinguished the bactericidal effect of regimens revealing the moxifloxacin-20 mg rifampicin regimen produced a shorter time to bacillary clearance compared with standard-of-care regimen, p=0.008, HR 2.9, 95% CI (1.3 to 6.7). Our data show that the TB-MBLA could inform clinical decision making in real-time and expedite drug TB clinical trials.

Modelling the effects of environmental heterogeneity within the lung on the tuberculosis life-cycle.

Progress in shortening the duration of tuberculosis (TB) treatment is hampered by the lack of a predictive model that accurately reflects the diverse environment within the lung. This is important as TB has been shown to produce distinct localisations to different areas of the lung during different disease stages, with the environmental heterogeneity within the lung of factors such as air ventilation, blood perfusion and oxygen tension believed to contribute to the apical localisation witnessed during the post-primary form of the disease. Building upon our previous model of environmental lung heterogeneity, we present a networked metapopulation model that simulates TB across the whole lung, incorporating these notions of environmental heterogeneity across the whole TB life-cycle to show how different stages of the disease are influenced by different environmental and immunological factors. The alveolar tissue in the lung is divided into distinct patches, with each patch representing a portion of the total tissue and containing environmental attributes that reflect the internal conditions at that location. We include populations of bacteria and immune cells in various states, and events are included which determine how the members of the model interact with each other and the environment. By allowing some of these events to be dependent on environmental attributes, we create a set of heterogeneous dynamics, whereby the location of the tissue within the lung determines the disease pathological events that occur there. Our results show that the environmental heterogeneity within the lung is a plausible driving force behind the apical localisation during post-primary disease. After initial infection, bacterial levels will grow in the initial infection location at the base of the lung until an adaptive immune response is initiated. During this period, bacteria are able to disseminate and create new lesions throughout the lung. During the latent stage, the lesions that are situated towards the apex are the largest in size, and once a post-primary immune-suppressing event occurs, it is the uppermost lesions that reach the highest levels of bacterial proliferation. Our sensitivity analysis also shows that it is the differential in blood perfusion, causing reduced immune activity towards the apex, which has the biggest influence of disease outputs.

Model-Based Relationship between the Molecular Bacterial Load Assay and Time to Positivity in Liquid Culture.

The molecular bacterial load (MBL) assay is a new tuberculosis biomarker which provides results in ∼4 hours. The relationship between MBL and time-to-positivity (TTP) has not been thoroughly studied, and predictive models do not exist. We aimed to develop a model for MBL and identify the MBL-TTP relationship in patients. The model was developed on data from 105 tuberculosis patients from Malawi, Mozambique, and Tanzania with joint MBL and TTP observations quantified from patient sputum collected for 12 weeks. MBL was quantified using PCR of mycobacterial RNA and TTP using the mycobacterial growth indicator tube (MGIT) 960 system. Treatment consisted of isoniazid, pyrazinamide, and ethambutol in standard doses together with rifampin 10 or 35 mg/kg of body weight. The developed MBL-TTP model included several linked submodels, a component describing decline of bacterial load in sputum, another component describing growth in liquid culture, and a hazard model translating bacterial growth into a TTP signal. Additional components for contaminated and negative TTP samples were included. Visual predictive checks performed using the developed model gave good description of the observed data. The model predicted greater total sample loss for TTP than MBL due to contamination and negative samples. The model detected an increase in bacterial killing for 35 versus 10 mg/kg rifampin (P = 0.002). In conclusion, a combined model for MBL and TTP was developed that described the MBL-TTP relationship. The full MBL-TTP model or each submodel was used separately. Second, the model can be used to predict biomarker response for MBL given TTP data or vice versa in historical or future trials.

Heat Inactivation Renders Sputum Safe and Preserves Mycobacterium tuberculosis RNA for Downstream Molecular Tests.

The World Health Organization End Tuberculosis (TB) strategy has called for the development of-and increased access to-effective tools for diagnosis and treatment of TB disease. Mycobacterium tuberculosis , the causative agent of TB, is categorized as a highly infectious agent. Consequently, diagnostic tests that involve comprehensive manipulation of specimens from presumed tuberculosis cases must be performed in a category 3 laboratory. We have evaluated the use of heat inactivation to render TB samples safe to work with while preserving RNA for downstream molecular tests. Using Mycobacterium bovis bacillus Calmette-Guérin (BCG) cultures and TB-positive sputum samples, we show that boiling for 20 min at 80, 85, and 95°C inactivates all M. tuberculosis bacilli. The efficiency of inactivation was verified by culturing heat-treated and untreated (live) fractions of BCG and TB sputum samples for 42 days. No growth was observed in the cultures of heat-treated samples. In contrast, the optical density of untreated BCG in Middlebrook 7H9 broth rose from 0.04 to 0.85, and the untreated sputum samples flagged positive at 3 days of incubation in mycobacterial growth indicator tubes. Quantification of reference genes 16S rRNA, transfer-messenger RNA (tmRNA), pre-16S rRNA, and rpoB by reverse transcriptase quantitative PCR (RT-qPCR) showed minimal loss in estimated bacterial load. The loss was RNA species dependent, <1 log10, 1.1 log10, 1.3 log10, and 2.4 log10 estimated CFU/ml for 16S rRNA, tmRNA, pre-16S rRNA, and rpoB, respectively. The RNA loss was independent of inactivation temperature. These findings show that heat inactivation could obviate the need for category 3 laboratories to perform RNA-based testing of TB samples.

Molecular Bacterial Load Assay Concurs with Culture on NaOH-Induced Loss of Mycobacterium tuberculosis Viability.

Effective methods to detect viable Mycobacterium tuberculosis, the main causative agent of tuberculosis (TB), are urgently needed. To date, cultivation of M. tuberculosis is the gold standard, which depends on initial sample processing with N-acetyl-l-cysteine-sodium hydroxide (NALC-NaOH), chemicals that compromise M. tuberculosis viability and, consequently, the performance of downstream tests. We applied culture and the novel molecular bacterial load assay (MBLA) to measure the loss of M. tuberculosis viability following NALC-NaOH treatment of M. tuberculosis H37Rv pure culture and clinical sputum samples from pulmonary TB patients. Compared to the bacterial loads of untreated controls, NALC-NaOH treatment of M. tuberculosis reduced the MBLA-detectable bacillary load (estimated number of CFU [eCFU] per milliliter) by 0.66 ± 0.21 log10 at 23°C (P = 0.018) and 0.72 ± 0.08 log10 at 30°C (P = 0.013). Likewise, NALC-NaOH treatment reduced the viable count on solid culture by 0.84 ± 0.02 log10 CFU/ml at 23°C (P < 0.001) and 0.85 ± 0.01 log10 CFU/ml at 30°C (P < 0.001), respectively. The reduction in the viable count was reflected by a corresponding increase in the time to positivity of the mycobacterial growth indicator tube (MGIT) liquid culture: 1.2 days at 23°C (P < 0.001) and 1.1 days at 30°C (P < 0.001). This NaOH-induced M. tuberculosis viability loss was replicated in clinical sputum samples, with the bacterial load dropping by 0.65 ± 0.17 log10 from 5.36 ± 0.24 log10 eCFU/ml to 4.71 ± 0.16 log10 eCFU/ml for untreated and treated sputa, respectively. Applying the model of Bowness et al. (R. Bowness, M. J. Boeree, R. Aarnoutse, R. Dawson, et al., J Antimicrob Chemother 70:448-455, 2015, https://doi.org/10.1093/jac/dku415) revealed that the treated MGIT time to culture positivity of 142 ± 7.02 h was equivalent to 4.86 ± 0.28 log10 CFU, consistent with the MBLA-measured bacterial load. Our study confirms the contribution of NALC-NaOH treatment to the loss of viable bacterial counts. Tests that obviate the need for decontamination may offer an alternative option for the accurate detection of viable M. tuberculosis and treatment response monitoring.

Can phenotypic data complement our understanding of antimycobacterial effects for drug combinations?

OBJECTIVES: To demonstrate how phenotypic cell viability data can provide insight into antimycobacterial effects for the isoniazid/rifampicin treatment backbone. METHODS: Data from a Mycobacterium komossense hollow-fibre infection model comprising a growth control group, rifampicin at three different exposures (Cmax = 0.14, 0.4 and 1.47 mg/L with t½ = 1.57 h and τ = 8 h) and rifampicin plus isoniazid (Cmax rifampicin = 0.4 mg/L and Cmax isoniazid = 1.2 mg/L with t½ = 1.57 h and τ = 8 h) were used for this investigation. A non-linear mixed-effects modelling approach was used to fit conventional cfu data, quantified using solid-agar plating. Phenotypic proportions of respiring (alive), respiring but with damaged cell membrane (injured) and 'not respiring' (dead) cells data were quantified using flow cytometry and Sytox Green™ (Sigma-Aldrich, UK) and resazurin sodium salt staining and fitted using a multinomial logistic regression model. RESULTS: Isoniazid/rifampicin combination therapy displayed a decreasing overall antimicrobial effect with time (θTime1/2 = 438 h) on cfu data, in contrast to rifampicin monotherapy where this trend was absent. In the presence of isoniazid a phenotype associated with cell injury was displayed, whereas with rifampicin monotherapy a pattern of phenotypic cell death was observed. Bacterial killing onset time on cfu data correlated negatively (θTime50 = 28.9 h, θLAGRIF50 = 0.132 mg/L) with rifampicin concentration up to 0.165 mg/L and this coincided with a positive relationship between rifampicin concentration and the probability of phenotypic cell death. CONCLUSIONS: Cell viability data provide structured information on the pharmacodynamic interaction between isoniazid and rifampicin that complements the understanding of the antibacillary effects of this mycobacterial treatment backbone.

Toxicity related to standard TB therapy for pulmonary tuberculosis and treatment outcomes in the REMoxTB study according to HIV status.

BACKGROUND: The phase III REMoxTB study prospectively enrolled HIV-positive (with CD4+ count > 250 cells, not on anti-retroviral therapy) and HIV-negative patients. We investigated the incidence of adverse events and cure rates according to HIV status for patients receiving standard TB therapy in the trial. METHODS: Forty-two HIV-positive cases were matched to 220 HIV-negative controls by age, gender, ethnicity, and trial site using coarsened exact matching. Grade 3 and 4 adverse events (AEs) were summarised by MedDRA System Organ Class. Kaplan-Meier curves for time to first grade 3 or 4 AE were constructed according to HIV status with hazard ratios calculated. Patients were considered cured if they were culture negative 18 months after commencing therapy with ≥2 consecutive negative culture results. RESULTS: Twenty of 42 (47.6%) HIV-positive and 34 of 220 (15.5%) HIV-negative patients experienced ≥1 grade 3 or 4 AE, respectively. The majority of these were hepatobiliary disorders that accounted for 12 of 40 (30.0%) events occurring in 6 of 42 (14.3%) HIV-positive patients and for 15 of 60 (25.0%) events occurring in 9 of 220 (4.1%) HIV-negative patients. The median time to first grade 3 or 4 AE was 54 days (IQR 15.5-59.0) for HIV-positive and 29.5 days (IQR 9.0-119.0) for HIV-negative patients, respectively. The hazard ratio for experiencing a grade 3 or 4 AE among HIV-positive patients was 3.25 (95% CI 1.87-5.66, p < 0.01). Cure rates were similar, with 38 of 42 (90.5%) HIV-positive and 195 of 220 (88.6%) HIV-negative patients (p = 0.73) cured at 18 months. CONCLUSIONS: HIV-positive patients receiving standard TB therapy in the REMoxTB study were at greater risk of adverse events during treatment but cure rates were similar when compared to a matched sample of HIV-negative patients.

Greater Early Bactericidal Activity at Higher Rifampicin Doses Revealed by Modeling and Clinical Trial Simulations.

Background: The currently recommended rifampicin dose (10 mg/kg) for treating tuberculosis is suboptimal. The PanACEA HIGHRIF1 trial evaluated the pharmacokinetics and early bactericidal activity of rifampicin doses of up to 40 mg/kg. Conventional statistical analyses revealed no significant exposure-response relationship. Our objectives were to explore the exposure-response relationship for high-dose rifampicin by using pharmacokinetic-pharmacodynamic modeling and to predict the early bactericidal activity of 50 mg/kg rifampicin. Methods: Data included time to Mycobacterium tuberculosis positivity of liquid cultures of sputum specimens from 83 patients with tuberculosis who were treated with 10 mg/kg rifampicin (n = 8; reference arm) or 20, 25, 30, 35, or 40 mg/kg rifampicin (n = 15/arm) for 7 days. We used a semimechanistic time-to-event approach to model the time-to-positivity data. Rifampicin exposure and baseline time to culture positivity were explored as covariates. Results: The baseline time to culture positivity was a significant covariate on the predicted initial bacterial load, and rifampicin exposure was a significant covariate on the bacterial kill rate in sputum resulting in increased early bactericidal activity. The 90% prediction interval for the predicted median day 7 increase in time to positivity for 50 mg/kg rifampicin was 7.25-10.3 days. Conclusions: A significant exposure-response relationship was found between rifampicin exposure and early bactericidal activity. Clinical trial simulations showed greater early bactericidal activity for 50 mg/kg rifampicin. Clinical Trials Registration: NCT01392911.

The Potential for Treatment Shortening With Higher Rifampicin Doses: Relating Drug Exposure to Treatment Response in Patients With Pulmonary Tuberculosis.

Background: Tuberculosis remains a huge public health problem and the prolonged treatment duration obstructs effective tuberculosis control. Higher rifampicin doses have been associated with better bactericidal activity, but optimal dosing is uncertain. This analysis aimed to characterize the relationship between rifampicin plasma exposure and treatment response over 6 months in a recent study investigating the potential for treatment shortening with high-dose rifampicin. Methods: Data were analyzed from 336 patients with pulmonary tuberculosis (97 with pharmacokinetic data) treated with rifampicin doses of 10, 20, or 35 mg/kg. The response measure was time to stable sputum culture conversion (TSCC). We derived individual exposure metrics with a previously developed population pharmacokinetic model of rifampicin. TSCC was modeled using a parametric time-to-event approach, and a sequential exposure-response analysis was performed. Results: Higher rifampicin exposures increased the probability of early culture conversion. No maximal limit of the effect was detected within the observed range. The expected proportion of patients with stable culture conversion on liquid medium at week 8 was predicted to increase from 39% (95% confidence interval, 37%-41%) to 55% (49%-61%), with the rifampicin area under the curve increasing from 20 to 175 mg/L·h (representative for 10 and 35 mg/kg, respectively). Other predictors of TSCC were baseline bacterial load, proportion of culture results unavailable, and substitution of ethambutol for either moxifloxacin or SQ109. Conclusions: Increasing rifampicin exposure shortened TSCC, and the effect did not plateau, indicating that doses >35 mg/kg could be yet more effective. Optimizing rifampicin dosage while preventing toxicity is a clinical priority.

Moxifloxacin Replacement in Contemporary Tuberculosis Drug Regimens Is Ineffective against Persistent Mycobacterium tuberculosis in the Cornell Mouse Model.

Tuberculosis (TB), which is caused by Mycobacterium tuberculosis, remains a leading killer worldwide, and disease control is hampered by the ineffective control of persistent infections. Substitution of moxifloxacin for isoniazid or ethambutol in standard anti-TB regimens reduces the treatment duration and relapse rates in animal studies, and 4-month regimens were not noninferior in clinical trials. Resuscitation-promoting factor (RPF)-dependent bacilli have recently been implicated in M. tuberculosis persistence. We aimed to investigate the therapeutic effects of the substitution of moxifloxacin for a drug used in the standard drug regimen in eradicating CFU count-positive and RPF-dependent persistent M. tuberculosis using the Cornell murine model. M. tuberculosis-infected mice were treated with regimens in which either isoniazid or ethambutol was replaced by moxifloxacin in the standard regimen. The efficacy of the regimens for bacterial CFU count elimination and removal of persistent tubercle bacilli, evaluated using culture filtrate (CF) derived from M. tuberculosis strain H37Rv, was compared to that of the standard regimen. We also measured disease relapse rates. The regimen in which moxifloxacin replaced isoniazid achieved total organ CFU count clearance at 11 weeks posttreatment, which was faster than that by the standard regimen (14 weeks), and showed a 34% lower relapse rate. The regimen in which moxifloxacin replaced ethambutol was similar to standard regimens in these regards. Importantly, neither the regimen in which moxifloxacin replaced isoniazid or ethambutol nor the standard regimen could remove CF-dependent persistent bacilli. The finding of CF-dependent persistent M. tuberculosis in TB treatment requires confirmation in human studies and has implications for future drug design, testing, and clinical applications.

Modelling the effects of bacterial cell state and spatial location on tuberculosis treatment: Insights from a hybrid multiscale cellular automaton model.

If improvements are to be made in tuberculosis (TB) treatment, an increased understanding of disease in the lung is needed. Studies have shown that bacteria in a less metabolically active state, associated with the presence of lipid bodies, are less susceptible to antibiotics, and recent results have highlighted the disparity in concentration of different compounds into lesions. Treatment success therefore depends critically on the responses of the individual bacteria that constitute the infection. We propose a hybrid, individual-based approach that analyses spatio-temporal dynamics at the cellular level, linking the behaviour of individual bacteria and host cells with the macroscopic behaviour of the microenvironment. The individual elements (bacteria, macrophages and T cells) are modelled using cellular automaton (CA) rules, and the evolution of oxygen, drugs and chemokine dynamics are incorporated in order to study the effects of the microenvironment in the pathological lesion. We allow bacteria to switch states depending on oxygen concentration, which affects how they respond to treatment. This is the first multiscale model of its type to consider both oxygen-driven phenotypic switching of the Mycobacterium tuberculosis and antibiotic treatment. Using this model, we investigate the role of bacterial cell state and of initial bacterial location on treatment outcome. We demonstrate that when bacteria are located further away from blood vessels, less favourable outcomes are more likely, i.e. longer time before infection is contained/cleared, treatment failure or later relapse. We also show that in cases where bacteria remain at the end of simulations, the organisms tend to be slower-growing and are often located within granulomas, surrounded by caseous material.

Toxicity associated with tuberculosis chemotherapy in the REMoxTB study.

BACKGROUND: The incidence and severity of tuberculosis chemotherapy toxicity is poorly characterised. We used data available from patients in the REMoxTB trial to provide an assessment of the risks associated with the standard regimen and two experimental regimens containing moxifloxacin. METHODS: All grade 3 & 4 adverse events (AEs) and their relationship to treatment for patients who had taken at least one dose of therapy in the REMoxTB clinical trial were recorded. Univariable logistic regression was used to test the relationship of baseline characteristics to the incidence of grade 3 & 4 AEs and significant characteristics (p < 0.10) were incorporated into a multivariable model. The timing of AEs during therapy was analysed in standard therapy and the experimental arms. Logistic regression was used to investigate the relationship between AEs (total and related-only) and microbiological cure on treatment. RESULTS: In the standard therapy arm 57 (8.9%) of 639 patients experienced ≥1 related AEs with 80 of the total 113 related events (70.8%) occurring in the intensive phase of treatment. Both four-month experimental arms ("isoniazid arm" with moxifloxacin substituted for ethambutol & "ethambutol arm" with moxifloxacin substituted for isoniazid) had a lower total of related grade 3 & 4 AEs than standard therapy (63 & 65 vs 113 AEs). Female gender (adjOR 1.97, 95% CI 0.91-1.83) and HIV-positive status (adjOR 3.33, 95% CI 1.55-7.14) were significantly associated with experiencing ≥1 related AE (p < 0.05) on standard therapy. The most common adverse events on standard therapy related to hepatobiliary, musculoskeletal and metabolic disorders. Patients who experienced ≥1 related AE were more likely to fail treatment or relapse (adjOR 3.11, 95% CI 1.59-6.10, p < 0.001). CONCLUSIONS: Most AEs considered related to standard therapy occurred in the intensive phase of treatment with female patients and HIV-positive patients demonstrating a significantly higher risk of AEs during treatment. Almost a tenth of standard therapy patients had a significant side effect, whereas both experimental arms recorded a lower incidence of toxicity. That patients with one or more AE are more likely to fail treatment suggests that treatment outcomes could be improved by identifying such patients through targeted monitoring.