Neuronal sensorimotor integration guiding salt concentration navigation in Caenorhabditis elegans.

Animals navigate their environment by manipulating their movements and adjusting their trajectory which requires a sophisticated integration of sensory data with their current motor status. Here, we utilize the nematode Caenorhabditis elegans to explore the neural mechanisms of processing the sensory and motor information for navigation. We developed a microfluidic device which allows animals to freely move their heads while receiving temporal NaCl stimuli. We found that C. elegans regulates neck bending direction in response to temporal NaCl concentration changes in a way which is consistent with a C. elegans' navigational strategy which regulates traveling direction toward preferred NaCl concentrations. Our analysis also revealed that the activity of a neck motor neuron is significantly correlated with neck bending and activated by the decrease in NaCl concentration in a phase-dependent manner. By combining the analysis of behavioral and neural response to NaCl stimuli and optogenetic perturbation experiments, we revealed that NaCl decrease during ventral bending activates the neck motor neuron which counteracts ipsilateral bending. Simulations further suggest that this phase-dependent response of neck motor neurons can facilitate curving toward preferred salt concentrations.

A Wettability Contrast SERS Droplet Assay for Multiplexed Analyte Detection.

Droplet assay platforms have emerged as a significant methodology, providing distinct advantages such as sample compartmentalization, high throughput, and minimal analyte consumption. However, inherent complexities, especially in multiplexed detection, remain a challenge. We demonstrate a novel strategy to fabricate a plasmonic droplet assay platform (PDAP) for multiplexed analyte detection, enabling surface-enhanced Raman spectroscopy (SERS). PDAP efficiently splits a microliter droplet into submicroliter to nanoliter droplets under gravity-driven flow by wettability contrast between two distinct regions. The desired hydrophobicity and adhesive contrast between the silicone oil-grafted nonadhesive hydrophilic zone with gold nanoparticles is attained through (3-aminopropyl) triethoxysilane (APTES) functionalization of gold nanoparticles (AuNPs) using a scotch-tape mask. The wettability contrast surface facilitates the splitting of aqueous droplets with various surface tensions (ranging from 39.08 to 72 mN/m) into ultralow volumes of nanoliters. The developed PDAP was used for the multiplexed detection of Rhodamine 6G (Rh6G) and Crystal Violet (CV) dyes. The limit of detection for 120 nL droplet using PDAP was found to be 134 pM and 10.1 nM for Rh6G and CV, respectively. These results align with those from previously reported platforms, highlighting the comparable sensitivity of the developed PDAP. We have also demonstrated the competence of PDAP by testing adulterant spiked milk and obtained very good sensitivity. Thus, PDAP has the potential to be used for the multiplexed screening of food adulterants.

Fourier Transform Coherent Anti-Stokes Raman Scattering Spectroscopy: A Comprehensive Review.

Fourier transform coherent anti-Stokes Raman scattering (FT-CARS) spectroscopy is a powerful spectroscopic method that combines the principles of Fourier transform spectroscopy with coherent anti-Stokes Raman scattering (CARS). This method stands out in spectroscopy for its ability to rapidly acquire coherent Raman spectra, achieving an impressive rate of over 10 000 spectra per second. The method involves scanning the optical delay between two femtosecond pulses; the initial pulse induces a vibrational coherence in the sample, while the subsequent pulse probes this coherence over increasing delays. The anti-Stokes scattering intensity generated is modulated by the vibrational dynamics of the sample, enabling the retrieval of Raman spectra through Fourier transformation. Over the past two decades, FT-CARS spectroscopy has undergone substantial evolution, paving the way for its application in a wide array of fields, including material analysis and flow cytometry. In this comprehensive Review, we explore the fundamental principles and diverse applications of FT-CARS spectroscopy and delve into the potential future advances and challenges associated with this emerging method.

Manipulation of photosynthetic energy transfer by vibrational strong coupling.

Uncovering the mystery of efficient and directional energy transfer in photosynthetic organisms remains a critical challenge in quantum biology. Recent experimental evidence and quantum theory developments indicate the significance of quantum features of molecular vibrations in assisting photosynthetic energy transfer, which provides the possibility of manipulating the process by controlling molecular vibrations. Here, we propose and theoretically demonstrate efficient manipulation of photosynthetic energy transfer by using vibrational strong coupling between the vibrational state of a Fenna-Matthews-Olson (FMO) complex and the vacuum state of an optical cavity. Specifically, based on a full-quantum analytical model to describe the strong coupling effect between the optical cavity and molecular vibration, we realize efficient manipulation of energy transfer efficiency (from 58% to 92%) and energy transfer time (from 20 to 500 ps) in one branch of FMO complex by actively controlling the coupling strength and the quality factor of the optical cavity under both near-resonant and off-resonant conditions, respectively. Our work provides a practical scenario to manipulate photosynthetic energy transfer by externally interfering molecular vibrations via an optical cavity and a comprehensible conceptual framework for researching other similar systems.

Boosting the Brightness of Raman Tags Using Cyanostar Macrocycles.

Raman probes have received growing attention for their potential use in super-multiplex biological imaging and flow cytometry applications that cannot be achieved using fluorescent probes. However, obtaining strong Raman scattering signals from small Raman probes has posed a challenge that holds back their practical implementation. Here, we present new types of Raman-active nanoparticles (Rdots) that incorporate ionophore macrocycles, known as cyanostars, to act as ion-driven and structure-directing spacers to address this problem. These macrocycle-enhanced Rdots (MERdots) exhibit sharper and higher electronic absorption peaks than Rdots. When combined with resonant broadband time-domain Raman spectroscopy, these MERdots show a ∼3-fold increase in Raman intensity compared to conventional Rdots under the same particle concentration. Additionally, the detection limit on the concentration of MERdots is improved by a factor of 2.5 compared to that of Rdots and a factor of 430 compared to that of Raman dye molecules in solution. The compact size of MERdots (26 nm in diameter) and their increased Raman signal intensity, along with the broadband capabilities of time-domain resonant Raman spectroscopy, make them promising candidates for a wide range of biological applications.

Graphene oxide bulk material reinforced by heterophase platelets with multiscale interface crosslinking.

Graphene oxide (GO) and reduced GO possess robust mechanical, electrical and chemical properties. Their nanocomposites have been extensively explored for applications in diverse fields. However, due to the high flexibility and weak interlayer interactions of GO nanosheets, the flexural mechanical properties of GO-based composites, especially in bulk materials, are largely constrained, which hinders their performance in practical applications. Here, inspired by the amorphous/crystalline feature of the heterophase within nacreous platelets, we present a centimetre-sized, GO-based bulk material consisting of building blocks of GO and amorphous/crystalline leaf-like MnO2 hexagon nanosheets adhered together with polymer-based crosslinkers. These building blocks are stacked and hot-pressed with further crosslinking between the layers to form a GO/MnO2-based layered (GML) bulk material. The resultant GML bulk material exhibits a flexural strength of 231.2 MPa. Moreover, the material exhibits sufficient fracture toughness and strong impact resistance while being light in weight. Experimental and numerical analyses indicate that the ordered heterophase structure and synergetic crosslinking interactions across multiscale interfaces lead to the superior mechanical properties of the material. These results are expected to provide insights into the design of structural materials and potential applications of high-performance GO-based bulk materials in aerospace, biomedicine and electronics.

Label-free multiphoton imaging flow cytometry.

Label-free imaging flow cytometry is a powerful tool for biological and medical research as it overcomes technical challenges in conventional fluorescence-based imaging flow cytometry that predominantly relies on fluorescent labeling. To date, two distinct types of label-free imaging flow cytometry have been developed, namely optofluidic time-stretch quantitative phase imaging flow cytometry and stimulated Raman scattering (SRS) imaging flow cytometry. Unfortunately, these two methods are incapable of probing some important molecules such as starch and collagen. Here, we present another type of label-free imaging flow cytometry, namely multiphoton imaging flow cytometry, for visualizing starch and collagen in live cells with high throughput. Our multiphoton imaging flow cytometer is based on nonlinear optical imaging whose image contrast is provided by two optical nonlinear effects: four-wave mixing (FWM) and second-harmonic generation (SHG). It is composed of a microfluidic chip with an acoustic focuser, a lab-made laser scanning SHG-FWM microscope, and a high-speed image acquisition circuit to simultaneously acquire FWM and SHG images of flowing cells. As a result, it acquires FWM and SHG images (100 × 100 pixels) with a spatial resolution of 500 nm and a field of view of 50 µm × 50 µm at a high event rate of four to five events per second, corresponding to a high throughput of 560-700 kb/s, where the event is defined by the passage of a cell or a cell-like particle. To show the utility of our multiphoton imaging flow cytometer, we used it to characterize Chromochloris zofingiensis (NIES-2175), a unicellular green alga that has recently attracted attention from the industrial sector for its ability to efficiently produce valuable materials for bioplastics, food, and biofuel. Our statistical image analysis found that starch was distributed at the center of the cells at the early cell cycle stage and became delocalized at the later stage. Multiphoton imaging flow cytometry is expected to be an effective tool for statistical high-content studies of biological functions and optimizing the evolution of highly productive cell strains.

Intelligent sort-timing prediction for image-activated cell sorting.

Intelligent image-activated cell sorting (iIACS) has enabled high-throughput image-based sorting of single cells with artificial intelligence (AI) algorithms. This AI-on-a-chip technology combines fluorescence microscopy, AI-based image processing, sort-timing prediction, and cell sorting. Sort-timing prediction is particularly essential due to the latency on the order of milliseconds between image acquisition and sort actuation, during which image processing is performed. The long latency amplifies the effects of the fluctuations in the flow speed of cells, leading to fluctuation and uncertainty in the arrival time of cells at the sort point on the microfluidic chip. To compensate for this fluctuation, iIACS measures the flow speed of each cell upstream, predicts the arrival timing of the cell at the sort point, and activates the actuation of the cell sorter appropriately. Here, we propose and demonstrate a machine learning technique to increase the accuracy of the sort-timing prediction that would allow for the improvement of sort event rate, yield, and purity. Specifically, we trained an algorithm to predict the sort timing for morphologically heterogeneous budding yeast cells. The algorithm we developed used cell morphology, position, and flow speed as inputs for prediction and achieved 41.5% lower prediction error compared to the previously employed method based solely on flow speed. As a result, our technique would allow for an increase in the sort event rate of iIACS by a factor of ~2.

Long-term effects of Pfizer-BioNTech COVID-19 vaccinations on platelets.

There is a global concern about the safety of COVID-19 vaccines associated with platelet function. However, their long-term effects on overall platelet activity remain poorly understood. Here we address this problem by image-based single-cell profiling and temporal monitoring of circulating platelet aggregates in the blood of healthy human subjects, before and after they received multiple Pfizer-BioNTech (BNT162b2) vaccine doses over a time span of nearly 1 year. Results show no significant or persisting platelet aggregation trends following the vaccine doses, indicating that any effects of vaccinations on platelet turnover, platelet activation, platelet aggregation, and platelet-leukocyte interaction was insignificant.

Real-time intelligent classification of COVID-19 and thrombosis via massive image-based analysis of platelet aggregates.

Microvascular thrombosis is a typical symptom of COVID-19 and shows similarities to thrombosis. Using a microfluidic imaging flow cytometer, we measured the blood of 181 COVID-19 samples and 101 non-COVID-19 thrombosis samples, resulting in a total of 6.3 million bright-field images. We trained a convolutional neural network to distinguish single platelets, platelet aggregates, and white blood cells and performed classical image analysis for each subpopulation individually. Based on derived single-cell features for each population, we trained machine learning models for classification between COVID-19 and non-COVID-19 thrombosis, resulting in a patient testing accuracy of 75%. This result indicates that platelet formation differs between COVID-19 and non-COVID-19 thrombosis. All analysis steps were optimized for efficiency and implemented in an easy-to-use plugin for the image viewer napari, allowing the entire analysis to be performed within seconds on mid-range computers, which could be used for real-time diagnosis.

Intelligent image-activated sorting of Chlamydomonas reinhardtii by mitochondrial localization.

Organelle positioning in cells is associated with various metabolic functions and signaling in unicellular organisms. Specifically, the microalga Chlamydomonas reinhardtii repositions its mitochondria, depending on the levels of inorganic carbon. Mitochondria are typically randomly distributed in the Chlamydomonas cytoplasm, but relocate toward the cell periphery at low inorganic carbon levels. This mitochondrial relocation is linked with the carbon-concentrating mechanism, but its significance is not yet thoroughly understood. A genotypic understanding of this relocation would require a high-throughput method to isolate rare mutant cells not exhibiting this relocation. However, this task is technically challenging due to the complex intracellular morphological difference between mutant and wild-type cells, rendering conventional non-image-based high-event-rate methods unsuitable. Here, we report our demonstration of intelligent image-activated cell sorting by mitochondrial localization. Specifically, we applied an intelligent image-activated cell sorting system to sort for C. reinhardtii cells displaying no mitochondrial relocation. We trained a convolutional neural network (CNN) to distinguish the cell types based on the complex morphology of their mitochondria. The CNN was employed to perform image-activated sorting for the mutant cell type at 180 events per second, which is 1-2 orders of magnitude faster than automated microscopy with robotic pipetting, resulting in an enhancement of the concentration from 5% to 56.5% corresponding to an enrichment factor of 11.3. These results show the potential of image-activated cell sorting for connecting genotype-phenotype relations for rare-cell populations, which require a high throughput and could lead to a better understanding of metabolic functions in cells.

High-Throughput Raman Flow Cytometry and Beyond.

Flow cytometry is a powerful tool with applications in diverse fields such as microbiology, immunology, virology, cancer biology, stem cell biology, and metabolic engineering. It rapidly counts and characterizes large heterogeneous populations of cells in suspension (e.g., blood cells, stem cells, cancer cells, and microorganisms) and dissociated solid tissues (e.g., lymph nodes, spleen, and solid tumors) with typical throughputs of 1,000-100,000 events per second (eps). By measuring cell size, cell granularity, and the expression of cell surface and intracellular molecules, it provides systematic insights into biological processes. Flow cytometers may also include cell sorting capabilities to enable subsequent additional analysis of the sorted sample (e.g., electron microscopy and DNA/RNA sequencing), cloning, and directed evolution. Unfortunately, traditional flow cytometry has several critical limitations as it mainly relies on fluorescent labeling for cellular phenotyping, which is an indirect measure of intracellular molecules and surface antigens. Furthermore, it often requires time-consuming preparation protocols and is incompatible with cell therapy. To overcome these difficulties, a different type of flow cytometry based on direct measurements of intracellular molecules by Raman spectroscopy, or "Raman flow cytometry" for short, has emerged. Raman flow cytometry obtains a chemical fingerprint of the cell in a nondestructive manner, allowing for single-cell metabolic phenotyping. However, its slow signal acquisition due to the weak light-molecule interaction of spontaneous Raman scattering prevents the throughput necessary to interrogate large cell populations in reasonable time frames, resulting in throughputs of about 1 eps. The remedy to this throughput limit lies in coherent Raman scattering methods such as stimulated Raman scattering (SRS) and coherent anti-Stokes Raman scattering (CARS), which offer a significantly enhanced light-sample interaction and hence enable high-throughput Raman flow cytometry, Raman imaging flow cytometry, and even Raman image-activated cell sorting (RIACS). In this Account, we outline recent advances, technical challenges, and emerging opportunities of coherent Raman flow cytometry. First, we review the principles of various types of SRS and CARS and introduce several techniques of coherent Raman flow cytometry such as CARS, multiplex CARS, Fourier-transform CARS, SRS, SRS imaging flow cytometry, and RIACS. Next, we discuss a unique set of applications enabled by coherent Raman flow cytometry, from microbiology and lipid biology to cancer detection and cell therapy. Finally, we describe future opportunities and challenges of coherent Raman flow cytometry including increasing sensitivity and throughput, integration with droplet microfluidics, utilizing machine learning techniques, or achieving in vivo flow cytometry. This Account summarizes the growing field of high-throughput Raman flow cytometry and the bright future it can bring.

High-throughput sorting of nanoliter droplets enabled by a sequentially addressable dielectrophoretic array.

Droplet microfluidics has emerged as a powerful tool for a diverse range of biomedical and industrial applications such as single-cell analysis, directed evolution, and metabolic engineering. In these applications, droplet sorting has been effective for isolating small droplets encapsulating molecules, cells, or crystals of interest. Recently, there is an increased interest in extending the applicability of droplet sorting to larger droplets to utilize their size advantage. However, sorting throughputs of large droplets have been limited, hampering their wide adoption. Here, we report our demonstration of high-throughput fluorescence-activated droplet sorting of 1 nL droplets using an upgraded version of the sequentially addressable dielectrophoretic array (SADA), which we reported previously. The SADA is an array of electrodes that are individually and sequentially activated/deactivated according to the speed and position of a droplet passing nearby the array. We upgraded the SADA by increasing the number of driving electrodes constituting the SADA and incorporating a slanted microchannel. By using a ten-electrode SADA with the slanted microchannel, we achieved fluorescence-activated droplet sorting of 1 nL droplets at a record high throughput of 1752 droplets/s, twice as high as the previously reported maximum sorting throughput of 1 nL droplets.

Label-free chemical imaging flow cytometry by high-speed multicolor stimulated Raman scattering.

Combining the strength of flow cytometry with fluorescence imaging and digital image analysis, imaging flow cytometry is a powerful tool in diverse fields including cancer biology, immunology, drug discovery, microbiology, and metabolic engineering. It enables measurements and statistical analyses of chemical, structural, and morphological phenotypes of numerous living cells to provide systematic insights into biological processes. However, its utility is constrained by its requirement of fluorescent labeling for phenotyping. Here we present label-free chemical imaging flow cytometry to overcome the issue. It builds on a pulse pair-resolved wavelength-switchable Stokes laser for the fastest-to-date multicolor stimulated Raman scattering (SRS) microscopy of fast-flowing cells on a 3D acoustic focusing microfluidic chip, enabling an unprecedented throughput of up to ∼140 cells/s. To show its broad utility, we use the SRS imaging flow cytometry with the aid of deep learning to study the metabolic heterogeneity of microalgal cells and perform marker-free cancer detection in blood.

Highly sensitive Fourier-transform coherent anti-Stokes Raman scattering spectroscopy via genetic algorithm pulse shaping.

We report highly sensitive Fourier-transform coherent anti-Stokes Raman scattering spectroscopy enabled by genetic algorithm (GA) pulse shaping for adaptive dispersion compensation. We show that the non-resonant four-wave mixing signal from water can be used as a fitness indicator for successful GA training. This method allows GA adaptation to sample measurement conditions and offers significantly improved performance compared to training using second-harmonic generation from a nonlinear crystal in place of the sample. Results include a 3× improvement to peak signal-to-noise ratio for 2-propanol measurement, as well as a 10× improvement to peak intensities from the high-throughput measurement of polystyrene microbeads under flow.

Morphological Indicator for Directed Evolution of Euglena gracilis with a High Heavy Metal Removal Efficiency.

In the past few decades, microalgae-based bioremediation methods for treating heavy metal (HM)-polluted wastewater have attracted much attention by virtue of their environment friendliness, cost efficiency, and sustainability. However, their HM removal efficiency is far from practical use. Directed evolution is expected to be effective for developing microalgae with a much higher HM removal efficiency, but there is no non-invasive or label-free indicator to identify them. Here, we present an intelligent cellular morphological indicator for identifying the HM removal efficiency of Euglena gracilis in a non-invasive and label-free manner. Specifically, we show a strong monotonic correlation (Spearman's ρ = -0.82, P = 2.1 × 10-5) between a morphological meta-feature recognized via our machine learning algorithms and the Cu2+ removal efficiency of 19 E. gracilis clones. Our findings firmly suggest that the morphology of E. gracilis cells can serve as an effective HM removal efficiency indicator and hence have great potential, when combined with a high-throughput image-activated cell sorter, for directed-evolution-based development of E. gracilis with an extremely high HM removal efficiency for practical wastewater treatment worldwide.

Effects of Flow-Induced Microfluidic Chip Wall Deformation on Imaging Flow Cytometry.

Imaging flow cytometry is a powerful tool by virtue of its capability for high-throughput cell analysis. The advent of high-speed optical imaging methods on a microfluidic platform has significantly improved cell throughput and brought many degrees of freedom to instrumentation and applications over the last decade, but it also poses a predicament on microfluidic chips. Specifically, as the throughput increases, the flow speed also increases (currently reaching 10 m/s): consequently, the increased hydrodynamic pressure on the microfluidic chip deforms the wall of the microchannel and produces detrimental effects lead to defocused and blur image. Here, we present a comprehensive study of the effects of flow-induced microfluidic chip wall deformation on imaging flow cytometry. We fabricated three types of microfluidic chips with the same geometry and different degrees of stiffness made of polydimethylsiloxane (PDMS) and glass to investigate material influence on image quality. First, we found the maximum deformation of a PDMS microchannel was >60 µm at a pressure of 0.6 MPa, while no appreciable deformation was identified in a glass microchannel at the same pressure. Second, we found the deviation of lag time that indicating velocity difference of migrating microbeads due to the deformation of the microchannel was 29.3 ms in a PDMS microchannel and 14.9 ms in a glass microchannel. Third, the glass microchannel focused cells into a slightly narrower stream in the X-Y plane and a significantly narrower stream in the Z-axis direction (focusing percentages were increased 30%, 32%, and 5.7% in the glass channel at flow velocities of 0.5, 1.5, and 3 m/s, respectively), and the glass microchannel showed stabler equilibrium positions of focused cells regardless of flow velocity. Finally, we achieved the world's fastest imaging flow cytometry by combining a glass microfluidic device with an optofluidic time-stretch microscopy imaging technique at a flow velocity of 25 m/s. © 2019 International Society for Advancement of Cytometry.

Analysis of signal detection configurations in optical time-stretch imaging.

Optical time-stretch (OTS) imaging is effective for observing ultra-fast dynamic events in real time by virtue of its capability of acquiring images with high spatial resolution at high speed. In different implementations of OTS imaging, different configurations of its signal detection, i.e. fiber-coupled and free-space detection schemes, are employed. In this research, we quantitatively analyze and compare the two detection configurations of OTS imaging in terms of sensitivity and image quality with the USAF-1951 resolution chart and diamond films, respectively, providing a valuable guidance for the system design of OTS imaging in diverse fields.

Sequentially timed all-optical mapping photography boosted by a branched 4f system with a slicing mirror.

We present sequentially timed all-optical mapping photography (STAMP) with a slicing mirror in a branched 4f system for an increased number of frames without sacrificing pixel resolution. The branched 4f system spectrally separates the laser light path into multiple paths by the slicing mirror placed in the Fourier plane. Fabricated by an ultra-precision end milling process, the slicing mirror has 18 mirror facets of differing mirror angles. We used the boosted STAMP to observe dynamics of laser ablation with two image sensors which captured 18 subsequent frames at a frame rate of 126 billion frames per second, demonstrating this technique's potential for imaging unexplored ultrafast non-repetitive phenomena.