RESUMO
A stimuli-responsive polymeric three-dimensional microstructured film (PTMF) is a 3D structure with an array of sealed chambers on its external surface. In this work, we demonstrate the use of PTMF as a laser-triggered stimulus-response system for local in vivo targeted blood vessels stimulation by vasoactive substances. The native vascular networks of the mouse mesentery were used as model tissues. Epinephrine and KCl were used as vasoactive agents that were sealed into individual chambers upon precipitation in the amount of pictograms. We demonstrated the method for non-damaged one-by-one chamber activation using a focused 532 nm laser light passed through biological tissues. To avoid laser-induced photothermal damage to biological tissues, the PTMF was functionalized with Nile Red dye, which effectively absorbs laser light. Chemically stimulated blood vessel fluctuations were analyzed using digital image processing methods. Hemodynamics changes were measured and visualized using the particle image velocimetry approach.
Assuntos
Lasers , Polímeros , Camundongos , Animais , Raios InfravermelhosRESUMO
Towards the improvement of the efficient study of drugs and contrast agents, the 3D microfluidic platforms are currently being actively developed for testing these substances and particles in vitro. Here, we have elaborated a microfluidic lymph node-on-chip (LNOC) as a tissue engineered model of a secondary tumor in lymph node (LN) formed due to the metastasis process. The developed chip has a collagen sponge with a 3D spheroid of 4T1 cells located inside, simulating secondary tumor in the lymphoid tissue. This collagen sponge has a morphology and porosity comparable to that of a native human LN. To demonstrate the suitability of the obtained chip for pharmacological applications, we used it to evaluate the effect of contrast agent/drug carrier size, on the penetration and accumulation of particles in 3D spheroids modeling secondary tumor. For this, the 0.3, 0.5 and 4 µm bovine serum albumin (BSA)/tannic acid (TA) capsules were mixed with lymphocytes and pumped through the developed chip. The capsule penetration was examined by scanning with fluorescence microscopy followed by quantitative image analysis. The results show that capsules with a size of 0.3 µm passed more easily to the tumor spheroid and penetrated inside. We hope that the device will represent a reliable alternative to in vivo early secondary tumor models and decrease the amount of in vivo experiments in the frame of preclinical study.
Assuntos
Neoplasias , Linfócitos T , Humanos , Cápsulas , Esferoides Celulares , Colágeno , LinfonodosRESUMO
Complex immunosuppressive therapy is prescribed in medical practice to patients with glomerulonephritis to help them overcome symptoms and prevent chronic renal failure. Such an approach requires long-term systemic administration of strong medications, which causes severe side effects. This work shows the efficiency of polymer capsule accumulation (2.8 ± 0.4 µm) containing labeled etanercept (100 µg per dose) in the kidneys of mice. The comparison of injection into the renal artery and tail vein shows the significant superiority of the intra-arterial administration strategy. The etanercept retention rate of 18% and 8% ID in kidneys was found 1 min and 1 h after injection, respectively. The capsules were predominantly localized in the glomeruli after injection in mice using a model of acute glomerulonephritis. Histological analysis confirmed a significant therapeutic effect only in animals with intra-arterial administration of microcapsules with etanercept. The proposed strategy combines endovascular surgery and the use of polymer microcapsules containing a high molecular weight drug that can be successfully applied to treat a wide range of kidney diseases associated with glomerular pathology.
Assuntos
Glomerulonefrite , Camundongos , Animais , Etanercepte/uso terapêutico , Cápsulas , Glomerulonefrite/patologia , Rim/patologia , Glomérulos Renais/patologiaRESUMO
The study reveals the polymer-crosslinker interactions and functionality of hydrophilic nanofibers for antibacterial wound coatings. Coaxial electrospinning leverages a drug encapsulation protocol for a core-shell fiber composite with a core derived from polyvinyl alcohol and polyethylene glycol with amorphous silica (PVA-PEG-SiO2), and a shell originating from polyvinyl alcohol and graphene oxide (PVA-GO). Crosslinking with GO and SiO2 initiates the hydrogel transition for the fiber composite upon contact with moisture, which aims to optimize the drug release. The effect of hydrogel-inducing additives on the drug kinetics is evaluated in the case of chlorhexidine digluconate (CHX) encapsulation in the core of core-shell fiber composite PVA-PEG-SiO2-1x-CHX@PVA-GO. The release rate is assessed with the zero, first-order, Higuchi, and Korsmeyer-Peppas kinetic models, where the inclusion of crosslinking silica provides a longer degradation and release rate. CHX medicated core-shell composite provides sustainable antibacterial activity against Staphylococcus aureus.
Assuntos
Grafite , Nanofibras , Grafite/farmacologia , Álcool de Polivinil , Dióxido de Silício , Hidrogéis/farmacologia , Antibacterianos/farmacologia , Antibacterianos/uso terapêutico , Bandagens , Nanofibras/uso terapêuticoRESUMO
Alcohol intoxication has a dangerous effect on human health and is often associated with a risk of catastrophic injuries and alcohol-related crimes. A demand to address this problem adheres to the design of new sensor systems for the real-time monitoring of exhaled breath. We introduce a new sensor system based on a porous hydrophilic layer of submicron silica particles (SiO2 SMPs) placed on a one-dimensional photonic crystal made of Ta2O5/SiO2 dielectric layers whose operation relies on detecting changes in the position of surface wave resonance during capillary condensation in pores. To make the active layer of SiO2 SMPs, we examine the influence of electrostatic interactions of media, particles, and the surface of the crystal influenced by buoyancy, gravity force, and Stokes drag force in the frame of the dip-coating preparation method. We evaluate the sensing performance toward biomarkers such as acetone, ammonia, ethanol, and isopropanol and test sensor system capabilities for alcohol intoxication assessment. We have found this sensor to respond to all tested analytes in a broad range of concentrations. By processing the sensor signals by principal component analysis, we selectively determined the analytes. We demonstrated the excellent performance of our device for alcohol intoxication assessment in real-time.
Assuntos
Intoxicação Alcoólica , Acetona/análise , Intoxicação Alcoólica/diagnóstico , Etanol/análise , Humanos , Óptica e Fotônica , Fótons , Dióxido de Silício/químicaRESUMO
Siliceous diatom frustules represent an up-and-coming platform for a range of bio-assisted nanofabrication processes able to overcome the complexity and high cost of current engineering technology solutions in terms of negligibly small power consumption and environmentally friendly processing combined with unique highly porous structures and properties. Herein, the modification of diatomite - a soft, loose, and fine-grained siliceous sedimentary rock composed of the remains of fossilized diatoms - with gold nanoparticles using layer-by-layer technology in combination with a freezing-induced loading approach is demonstrated. The obtained composite structures are characterized by dynamic light scattering, extinction spectroscopy, scanning (SEM) and transmission electron microscopy (TEM), and photoacoustic imaging techniques, and tested as a platform for surface-enhanced Raman scattering (SERS) using Rhodamine 6G. SEM, TEM, and energy dispersive X-ray spectroscopy (EDX) confirmed a dense coating of gold nanoparticles with an average size of 19 nm on the surface of the diatomite and within the pores. The photoacoustic signal excited at a wavelength of 532 nm increases with increasing loading cycles of up to three polyelectrolyte-gold nanoparticle bilayers. The hybrid materials based on diatomite modified with gold nanoparticles can be used as SERS substrates, but also as biosensors, catalysts, and platforms for advanced bioimaging.
Assuntos
Diatomáceas , Nanopartículas Metálicas , Terra de Diatomáceas , Diatomáceas/química , Congelamento , Ouro/química , Nanopartículas Metálicas/química , Análise Espectral Raman/métodosRESUMO
The freezing-induced loading (FIL) method is a promising technique for encapsulation of bioactive substances as well as for preparation of nanocomposite materials. A critically important aspect for this method is the remote control of the freezing process. The knowledge of the moment of freezing process ending can allow us to increase the quality of loading and reduce the process duration, thus making this approach more controllable. Herein, we present a photonic technique based on Raman spectroscopy as one of the optimal solutions for remote control of FIL. As a result of our study, the setup for obtaining Raman spectra during the process of liquid vehicle crystallization in suspensions has been developed, which allowed us to analyze the sorption of nanoparticles onto micro- and submicron particles by the FIL method in situ. The main focus of the present work is the in situ Raman spectroscopy monitoring of the crystallization process, including technologically important parameters such as the ice/water interface velocity in water colloids/suspensions and the moment of the final adsorption of the nanoparticles on the microparticles. In contrast to other approaches, Raman spectroscopy allows to directly observe the hydrogen bond formation during crystallization. Additionally, a schematic and a detailed description of the setup are presented here. Thus, the developed technique has a good perspective for scaling up the FIL approach and increasing the area of application of this technology.
RESUMO
Efficient delivery of genetic material to primary cells remains challenging. Here, efficient transfer of genetic material is presented using synthetic biodegradable nanocarriers, resembling extracellular vesicles in their biomechanical properties. This is based on two main technological achievements: generation of soft biodegradable polyelectrolyte capsules in nanosize and efficient application of the nanocapsules for co-transfer of different RNAs to tumor cell lines and primary cells, including hematopoietic progenitor cells and primary T cells. Near to 100% efficiency is reached using only 2.5 × 10-4 pmol of siRNA, and 1 × 10-3 nmol of mRNA per cell, which is several magnitude orders below the amounts reported for any of methods published so far. The data show that biodegradable nanocapsules represent a universal and highly efficient biomimetic platform for the transfer of genetic material with the utmost potential to revolutionize gene transfer technology in vitro and in vivo.
Assuntos
Portadores de Fármacos , Vesículas Extracelulares/metabolismo , Nanopartículas , Transfecção , Linhagem Celular Tumoral , Humanos , CinéticaRESUMO
Many nanomedicine approaches are struggling to reach high enough effectiveness in delivery if applied systemically. The perspective is sought to explore the clinical practices currently used for localized treatment. In this study, we combine in vivo targeting of carriers sensitive to the external magnetic field with clinically used endovascular delivery to specific site. Fluorescent micron-size capsules made of biodegradable polymers and containing magnetite nanoparticles incorporated in the capsule wall were explored in vivo using Near-Infrared Fluorescence Live Imaging for Real-Time. Comparison of systemic (intravenous) and directed (intra-arterial) administration of the magnetic microcapsule targeting in the hindpaw vessels demonstrated that using femoral artery injection in combination with magnetic field exposure is 4 times more efficient than tail vein injection. Thus, endovascular targeting significantly improves the capabilities of nanoengineered drug delivery systems reducing the systemic side effects of therapy.
Assuntos
Nanopartículas de Magnetita/química , Nanomedicina/métodos , Animais , Cápsulas/química , Sistemas de Liberação de Medicamentos/métodos , Humanos , Polímeros/químicaRESUMO
Endogenous autofluorescence of biological tissues is an important source of information for biomedical diagnostics. Despite the molecular complexity of biological tissues, the list of commonly known fluorophores is strictly limited. Still, the question of molecular sources of the red and near-infrared excited autofluorescence remains open. In this work we demonstrated that the oxidation products of organic components (lipids, proteins, amino acids, etc.) can serve as the molecular source of such red and near-infrared excited autofluorescence. Using model solutions and cell systems (human keratinocytes) under oxidative stress induced by UV irradiation we demonstrated that oxidation products can contribute significantly to the autofluorescence signal of biological systems in the entire visible range of the spectrum, even at the emission and excitation wavelengths higher than 650 nm. The obtained results suggest the principal possibility to explain the red fluorescence excitation in a large class of biosystems-aggregates of proteins and peptides, cells and tissues-by the impact of oxidation products, since oxidation products are inevitably presented in the tissue. The observed fluorescence signal with broad excitation originated from oxidation products may also lead to the alteration of metabolic imaging results and has to be taken into account.
Assuntos
Fluorescência , Imagem Molecular , Imagem Óptica , Oxirredução , Biomarcadores , Citometria de Fluxo , Humanos , Queratinócitos/metabolismo , Microscopia Confocal , Imagem Molecular/métodos , Imagem Óptica/métodos , Processos Fotoquímicos , Espectrometria de Fluorescência , Raios UltravioletaRESUMO
Optical fibers are widely used in bioimaging systems as flexible endoscopes that are capable of low-invasive penetration inside hollow tissue cavities. Here, we report on the technique that allows magnetic resonance imaging (MRI) of hollow-core microstructured fibers (HC-MFs), which paves the way for combing MRI and optical bioimaging. Our approach is based on layer-by-layer assembly of oppositely charged polyelectrolytes and magnetite nanoparticles on the inner core surface of HC-MFs. Incorporation of magnetite nanoparticles into polyelectrolyte layers renders HC-MFs visible for MRI and induces the red-shift in their transmission spectra. Specifically, the transmission shifts up to 60 nm have been revealed for the several-layers composite coating, along with the high-quality contrast of HC-MFs in MRI scans. Our results shed light on marrying fiber-based endoscopy with MRI to open novel possibilities for minimally invasive clinical diagnostics and surgical procedures in vivo.
RESUMO
Layer-by-layer assembled polymeric multilayer capsules (PMC) of micrometer sizes are permeable for molecules below 1 KDa; therefore, the efficacy of such capsules in the delivery of low molecular weight water soluble bioactive compounds and drugs is frequently challenged. Thermally induced contraction of hollow PMC is explored here to enhance their loading efficacy with model compound, fluorescent rhodamine B (RhB). Four bilayered capsules obtained of poly(diallyldimethylammonium chloride)/polystyrene sulfonate ([PDADMAC/PSS]4 ) or poly-l-arginine/dextran sulfate ([PARG/DS]4 ) on sacrificial CaCO3 spherical microparticles are postloaded with RhB at ambient or elevated temperatures. The influence of heat on capsule loading is determined quantitatively by varying the amounts of capsules in the batch and keeping the concentration of RhB constant. The applied heat improves the loading efficacy of [PDADMAC/PSS]4 capsules at concentrations up to 2.25 × 109 capsules mL-1 , but has a reversed effect on [PARG/DS]4 capsules at all studied concentrations ((0-3.5) × 109 capsules mL-1 ).
Assuntos
Cápsulas/química , Temperatura Alta , Polímeros/química , Rodaminas/química , Sulfato de Dextrana/química , Peptídeos/química , Polietilenos/química , Poliestirenos/química , Compostos de Amônio Quaternário/químicaRESUMO
Development of composite polymer/graphene oxide (GO) materials attracts significant attention due to their unique properties. In this work, highly ordered arrays of hollow microchambers made of composite polyelectrolyte/GO multilayers (PEGOMs) are successfully fabricated via layer-by-layer assembly on sacrificial or sustainable templates having imprinted patterns of microwells on their surface. Mechanical and optical properties of PEGOMs are studied by nanoindentation and near-infrared (NIR) absorption spectroscopy. Incorporation of three GO layers in between the polyelectrolyte multilayer stacks increases Young's modulus and critical stress of the microchambers by a factor of 5.6 and 2.6, respectively. Optical density of this PEGOM film is found to decrease gradually from 0.14 at λ = 800 nm to 0.06 at λ = 1500 nm. Remote opening of PEGOM microchambers with NIR laser beam is also demonstrated. One of the possible applications of the developed structures includes micropackaging and delivery systems in biological tissues with remote triggering.
Assuntos
Grafite/química , Raios Infravermelhos , Fenômenos Mecânicos , Impressão Molecular/instrumentação , Polieletrólitos/química , Polimetil Metacrilato/química , Estresse MecânicoRESUMO
Microcapsules, made of biodegradable polymers, containing magnetite nanoparticles with tunable contrast in both the T1 and T2 MRI modes, were successfully prepared using a layer-by-layer approach. The MRI contrast of the microcapsules was shown to depend on the distance between magnetite nanoparticles in the polymeric layers, which is controlled by their concentration in the microcapsule shell. A fivefold increase in the average distance between the nanoparticles in the microcapsule shell led to a change in the intensity of the MR signal of 100% for both the T1 and T2 modes. Enzyme treatment of biodegradable shells resulted in a change of the microcapsules' MRI contrast. In vivo degradation of nanocomposite microcapsules concentrated in the liver after intravenous injection was demonstrated by MRI. This method can be used for the creation of a new generation of drug delivery systems, including drug depot, with combined navigation, visualization and remote activated release of bioactive substances in vivo.
Assuntos
Materiais Biocompatíveis/química , Sistemas de Liberação de Medicamentos , Nanopartículas de Magnetita/química , Nanocompostos/química , Cápsulas , Imageamento por Ressonância MagnéticaRESUMO
Development of tailor-made porous polymer scaffolds acting as a temporary tissue-construct for cellular organization is of primary importance for tissue engineering applications. Control over the gel porosity is a critical issue due to the need for cells to proliferate and migrate and to ensure the transport of nutrition and metabolites. Gel loading with bioactive molecules is desired for target release of soluble signals to guide cell function. Calcium-alginate hydrogels are one of the most popular gels successfully utilized as polymer scaffolds. Here we propose a benchtop approach to design porous alginate gels by dispersion of CaCO3 vaterite crystals in sodium alginate followed by the crystal elimination. CaCO3 crystals play a triple role being (i) cross-linkers (a source of calcium ions to cross-link gel network), (ii) pore-makers (leaching of crystals retains the empty pores), and (iii) reservoirs with (bio)molecules (by molecule preloading into the crystals). Pore dimensions, interconnectivity, and density can be adjusted by choosing the size, concentration, and packing of the sacrificial CaCO3 crystals. An opportunity to load the pores with biomolecules was demonstrated using FITC-labeled dextrans of different molecular masses from 10 to 500 kDa. The dextrans were preloaded into CaCO3 vaterite crystals, and the subsequent crystal removal resulted in encapsulation of dextrans inside the pores of the gel. The dextran release rate from the gel pores depends on the equilibration of the gel structure as concluded by comparing dextran release kinetics during gelation (fast) and dextran diffusion into the performed gel (slower). Macromolecule binding to the gel is electrostatically driven as found for lysozyme and insulin. The application of porous gels as scaffolds potentially offering biomacromolecule encapsulation/release performance might be useful for alginate gel-based applications such as tissue engineering.
Assuntos
Alginatos/química , Géis , Carbonato de Cálcio/química , Ácido Glucurônico/química , Ácidos Hexurônicos/química , Microscopia Confocal , Microscopia Eletrônica de Varredura , Alicerces TeciduaisRESUMO
Herein, we have designed composite SERS-active micro-satellites, which exhibit a dual role: (i) effective probes for determining cellular composition and (ii) optically movable and easily detectable markers. The satellites were synthesized by the layer-by-layer assisted decoration of silica microparticles with metal (gold or silver) nanoparticles and astralen in order to ensure satellite SERS-based microenvironment probing and satellite recognition, respectively. A combination of optical tweezers and Raman spectroscopy can be used to navigate the satellites to a certain cellular compartment and probe the intracellular composition following cellular uptake. In the future, this developed approach may serve as a tool for single cell analysis with nanometer precision due to the multilayer surface design, focusing on both extracellular and intracellular studies.
Assuntos
Fibroblastos/citologia , Pinças Ópticas , Dióxido de Silício/química , Análise de Célula Única/instrumentação , Análise Espectral Raman/instrumentação , Animais , Linhagem Celular , Desenho de Equipamento , Ouro/química , Nanopartículas Metálicas/química , Camundongos , Prata/químicaRESUMO
Protein-coated microbubbles have become one of the emerging platforms in biomedical research as theranostic agents. In recent years, microbubbles have been extensively used as ultrasound contrast agents and carriers of molecular cargoes, pertaining to which several studies have focused on tuning the properties of these bubbles to achieve a higher degree of biocompatibility and extended stability. Synthesis of microbubbles has so far been traditionally carried out with pre-heated proteins like bovine serum albumin (BSA) as shell coatings, owing to the ease in making BSA crosslinked structures through disulfide bridge formation. We, however, have performed experiments to demonstrate that air core microbubbles formed with native BSA are more stable compared with those formed using denatured BSA. The experimental observations have been supported with analytical modeling and computational studies, which offer insights into the effect of BSA conformation in stabilizing the microbubbles shells and prolonging their lifetimes.
RESUMO
BACKGROUND: Real-time monitoring of food consumer quality remains challenging due to diverse bio-chemical processes taking place in the food matrices, and hence it requires accurate analytical methods. Thresholds to determine spoiled food are often difficult to set. The existing analytical methods are too complicated for rapid in situ screening of foodstuff. RESULTS: We have studied the dynamics of meat spoilage by electronic nose (e-nose) for digitizing the smell associated with volatile spoilage markers of meat, comparing the results with changes in the microbiome composition of the spoiling meat samples. We apply the time series analysis to follow dynamic changes in the gas profile extracted from the e-nose responses and to identify the change-point window of the meat state. The obtained e-nose features correlate with changes in the microbiome composition such as increase in the proportion of Brochothrix and Pseudomonas spp. and disappearance of Mycoplasma spp., and with representative gas sensors towards hydrogen, ammonia, and alcohol vapors with R2 values of 0.98, 0.93, and 0.91, respectively. Integration of e-nose and computer vision into a single analytical panel improved the meat state identification accuracy up to 0.85, allowing for more reliable meat state assessment. SIGNIFICANCE: Accurate identification of the change-point in the meat state achieved by digitalizing volatile spoilage markers from the e-nose unit holds promises for application of smart miniaturized devices in food industry.
Assuntos
Bactérias , Nariz Eletrônico , Bactérias/isolamento & purificação , Carne/microbiologia , Carne/análise , Microbiota , Animais , Qualidade dos Alimentos , Microbiologia de AlimentosRESUMO
While microbubbles (MB) are routinely used for ultrasound (US) imaging, magnetic MB are increasingly explored as they can be guided to specific sites of interest by applied magnetic field gradient. This requires the MB shell composition tuning to prolong MB stability and provide functionalization capabilities with magnetic nanoparticles. Hence, we developed air-filled MB stabilized by a protein-polymer complex of bovine serum albumin (BSA) and poly-L-arginine (pArg) of different molecular weights, showing that pArg of moderate molecular weight distribution (15-70 kDa) enabled MB with greater stability and acoustic response while preserving MB narrow diameters and the relative viability of THP-1 cells after 48 h of incubation. After MB functionalization with superparamagnetic iron oxide nanoparticles (SPION), magnetic moment values provided by single MB confirmed the sufficient SPION deposition onto BSA + pArg MB shells. During MB magnetic navigation in a blood vessel mimicking phantom with magnetic tweezers and in a Petri dish with adherent mouse renal carcinoma cell line, we demonstrated the effectiveness of magnetic MB localization in the desired area by magnetic field gradient. Magnetic MB co-localization with cells was further exploited for effective doxorubicin delivery with drug-loaded MB. Taken together, these findings open new avenues in control over albumin MB properties and magnetic navigation of SPION-loaded MB, which can envisage their applications in diagnostic and therapeutic needs.
Assuntos
Nanopartículas de Magnetita , Peptídeos , Camundongos , Animais , Nanopartículas de Magnetita/uso terapêutico , Microbolhas , Soroalbumina Bovina , Nanopartículas Magnéticas de Óxido de FerroRESUMO
We report on a change in the properties of monomolecular films of polyelectrolyte molecules, induced by illuminating the silicon substrate on which they adsorb. It was found that under illumination the thickness of the adsorbed layer decreases by at least 27% and at the same time the roughness is significantly reduced in comparison to a layer adsorbed without irradiation. Furthermore, the homogeneity of the film topography and the surface potential is shown to be improved by illumination. The effect is explained by a change in surface charge density under irradiation of n- and p-type silicon wafers. The altered charge density in turn induces conformational changes of the adsorbing polyelectrolyte molecules. Their photocontrolled adsorption opens new possibilities for selective manipulation of adsorbed films. This possibility is of potential importance for many applications such as the production of well-defined coatings in biosensors or microelectronics.