A Review on Bacteriorhodopsin-Based Bioelectronic Devices.

Bacteriorhodopsin protein extracted from Halobacterium salinarum is widely used in many biohybrid electronic devices and forms a research subject known as bioelectronics, which merges biology with electronic technique. The specific molecule structure and components of bR lead to its unique photocycle characteristic, which consists of several intermediates (bR, K, L, M, N, and O) and results in proton pump function. In this review, working principles and properties of bacteriorhodopsin are briefly introduced, as well as bR layer preparation method. After that, different bR-based devices divided into photochemical and photoelectric applications are shown. Finally, outlook and conclusions are drawn to inspire new design of high-performance bR-based biohybrid electronic devices.

Graphene-based Two-Stage Enhancement Pressure Sensor for Subtle Mechanical Force Monitoring.

The development of pressure sensors with high sensitivity and a low detection limit for subtle mechanical force monitoring and the understanding of the sensing mechanism behind subtle mechanical force monitoring are of great significance for intelligent technology. Here, we proposed a graphene-based two-stage enhancement pressure sensor (GTEPS), and we analyzed the difference between subtle mechanical force monitoring and conventional mechanical force monitoring. The GTEPS exhibited a high sensitivity of 62.2 kPa-1 and a low detection limit of 0.1 Pa. Leveraging its excellent performance, the GTEPS was successfully applied in various subtle mechanical force monitoring applications, including acoustic wave detection, voice-print recognition, and pulse wave monitoring. In acoustic wave detection, the GTEPS achieved a 100% recognition accuracy for six words. In voiceprint recognition, the sensor exhibited accurate identification of distinct voiceprints among individuals. Furthermore, in pulse wave monitoring, GTEPS demonstrated effective detection of pulse waves. By combination of the pulse wave signals with electrocardiogram (ECG) signals, it enabled the assessment of blood pressure. These results demonstrate the excellent performance of GTEPS and highlight its great potential for subtle mechanical force monitoring and its various applications. The current results indicate that GTEPS shows great potential for applications in subtle mechanical force monitoring.

Recent Advancements in Physiological, Biochemical, and Multimodal Sensors Based on Flexible Substrates: Strategies, Technologies, and Integrations.

Flexible wearable devices have been widely used in biomedical applications, the Internet of Things, and other fields, attracting the attention of many researchers. The physiological and biochemical information on the human body reflects various health states, providing essential data for human health examination and personalized medical treatment. Meanwhile, physiological and biochemical information reveals the moving state and position of the human body, and it is the data basis for realizing human-computer interactions. Flexible wearable physiological and biochemical sensors provide real-time, human-friendly monitoring because of their light weight, wearability, and high flexibility. This paper reviews the latest advancements, strategies, and technologies of flexibly wearable physiological and biochemical sensors (pressure, strain, humidity, saliva, sweat, and tears). Next, we systematically summarize the integration principles of flexible physiological and biochemical sensors with the current research progress. Finally, important directions and challenges of physiological, biochemical, and multimodal sensors are proposed to realize their potential applications for human movement, health monitoring, and personalized medicine.

Multichannel Flexible Pulse Perception Array for Intelligent Disease Diagnosis System.

Pressure sensors with high sensitivity, a wide linear range, and a quick response time are critical for building an intelligent disease diagnosis system that directly detects and recognizes pulse signals for medical and health applications. However, conventional pressure sensors have limited sensitivity and nonideal response ranges. We proposed a multichannel flexible pulse perception array based on polyimide/multiwalled carbon nanotube-polydimethylsiloxane nanocomposite/polyimide (PI/MPN/PI) sandwich-structure pressure sensor that can be applied for remote disease diagnosis. Furthermore, we established a mechanical model at the molecular level and guided the preparation of MPN. At the structural level, we achieved high sensitivity (35.02 kPa-1) and a broad response range (0-18 kPa) based on a pyramid-like bilayer microstructure with different upper and lower surfaces. A 27-channel (3 × 9) high-density sensor array was integrated at the device level, which can extract the spatial and temporal distribution information on a pulse. Furthermore, two intelligent algorithms were developed for extracting six-dimensional pulse information and automatic pulse recognition (the recognition rate reaches 97.8%). The results indicate that intelligent disease diagnosis systems have great potential applications in wearable healthcare devices.

An Ultra-Sensitive and Multifunctional Electronic Skin with Synergetic Network of Graphene and CNT.

Electronic skin (e-skin) has attracted tremendous interest due to its diverse potential applications, including in physiological signal detection, health monitoring, and artificial throats. However, the major drawbacks of traditional e-skin are the weak adhesion of substrates, incompatibility between sensitivity and stretchability, and its single function. These shortcomings limit the application of e-skin and increase the complexity of its multifunctional integration. Herein, the synergistic network of crosslinked SWCNTs within and between multilayered graphene layers was directly drip coated onto the PU thin film with self-adhesion to fabricate versatile e-skin. The excellent mechanical properties of prepared e-skin arise from the sufficient conductive paths guaranteed by SWCNTs in small and large deformation under various strains. The prepared e-skin exhibits a low detection limit, as small as 0.5% strain, and compatibility between sensitivity and stretchability with a gauge factor (GF) of 964 at a strain of 0-30%, and 2743 at a strain of 30-60%. In physiological signals detection application, the e-skin demonstrates the detection of subtle motions, such as artery pulse and blinking, as well as large body motions, such as knee joint bending, elbow movement, and neck movement. In artificial throat application, the e-skin integrates sound recognition and sound emitting and shows clear and distinct responses between different throat muscle movements and different words for sound signal acquisition and recognition, in conjunction with superior sound emission performance with a sound spectrum response of 71 dB (f = 12.5 kHz). Overall, the presented comprehensive study of novel materials, structures, properties, and mechanisms offers promising potential in physiological signals detection and artificial throat applications.

Two-stage amplification of an ultrasensitive MXene-based intelligent artificial eardrum.

We report an artificial eardrum using an acoustic sensor based on two-dimensional MXene (Ti3C2Tx), which mimics the function of a human eardrum for realizing voice detection and recognition. Using MXene with a large interlayer distance and micropyramid polydimethylsiloxane arrays can enable a two-stage amplification of pressure and acoustic sensing. The MXene artificial eardrum shows an extremely high sensitivity of 62 kPa-1 and a very low detection limit of 0.1 Pa. Notably, benefiting from the ultrasensitive MXene eardrum, the machine-learning algorithm for real-time voice classification can be realized with high accuracy. The 280 voice signals are successfully classified for seven categories, and a high accuracy of 96.4 and 95% can be achieved by the training dataset and the test dataset, respectively. The current results indicate that the MXene artificial intelligent eardrum shows great potential for applications in wearable acoustical health care devices.

Wafer-Scale Photolithography-Pixeled Pb-Free Perovskite X-ray Detectors.

Pb-free perovskite material is considered to be a promising material utilized in next-generation X-ray detectors due to its high X-ray absorption coefficient, decent carrier transport properties, and relatively low toxicity. However, the pixelation of the perovskite material with an industry-level photolithography processing method remains challenging due to its poor structural stability. Herein, we use Cs2AgBiBr6 perovskite material as the prototype and investigate its interaction with photolithographic polar solvents. Inspired by that, we propose a wafer-scale photolithography patterning method, where the pixeled perovskite array devices for X-ray detection are successfully prepared. The devices based on pixeled Pb-free perovskite material show a high detection sensitivity up to 19118 ± 763 µC Gyair-1 cm-2, which is comparable to devices with Pb-based perovskite materials and superior to the detection sensitivity (∼20 µC Gyair-1 cm-2) of the commercial a-Se detector. After pixelation, the devices achieve an improved spatial resolution capacity with the spatial frequency from 2.7 to 7.8 lp mm-1 at modulation-transfer-function (MTF) = 0.2. Thus, this work may contribute to the development of high-performance array X-ray detectors based on Cs2AgBiBr6 perovskite material.

Ultrafast Photodetector by Integrating Perovskite Directly on Silicon Wafer.

Single-crystal (SC) perovskite is currently a promising material due to its high quantum efficiency and long diffusion length. However, the reported perovskite photodetection range (<800 nm) and response time (>10 µs) are still limited. Here, to promote the development of perovskite-integrated optoelectronic devices, this work demonstrates wider photodetection range and shorter response time perovskite photodetector by integrating the SC CH3NH3PbBr3 (MAPbBr3) perovskite on silicon (Si). The Si/MAPbBr3 heterojunction photodetector with an improved interface exhibits high-speed, broad-spectrum, and long-term stability performances. To the best of our knowledge, the measured detectable spectrum (405-1064 nm) largely expands the widest response range reported in previous perovskite-based photodetectors. In addition, the rise time is as fast as 520 ns, which is comparable to that of commercial germanium photodetectors. Moreover, the Si/MAPbBr3 device can maintain excellent photocurrent performance for up to 3 months. Furthermore, typical gray scale face imaging is realized by scanning the Si/MAPbBr3 single-pixel photodetector. This work using an ultrafast photodetector by directly integrating perovskite on Si can promote advances in next-generation integrated optoelectronic technology.

An efficient flexible graphene-based light-emitting device.

In recent years, flexible light-emitting devices (LEDs) have become the main focus in the field of display technology. Graphene, a two-dimensional layered material, has attracted great interest in LEDs due to its excellent properties. However, there are many problems such as efficiency, lifetime, and flexibility not well solved. Herein, we have successfully prepared a flexible LED using laser-induced reduced graphene oxide (LIRGO). The LIRGO LED achieves a luminescence lifetime of over 60 hours and a wall plug efficiency of up to 1.4% in a vacuum environment of 0.02 Pa. There are many small luminescent spots randomly distributed on 3.5 × 5 mm2 of LIRGO. LIRGO's luminous behavior can be controlled by modifying the supply voltage and laser reduction intensity. We also explore LIRGO's applications by testing it in different packages and customizable bulbs. Furthermore, as an interesting demo, the LIRGO device can be used to mimic constellations with visual shapes. This work demonstrates LIRGO's great potential in many fields, such as flexible and miniature light sources and displays.

Flexible Two-Dimensional Ti3C2 MXene Films as Thermoacoustic Devices.

MXenes have attracted great attention for their potential applications in electrochemical and electronic devices due to their excellent characteristics. Traditional sound sources based on the thermoacoustic effect demonstrated that a conductor needs to have an extremely low heat capacity and high thermal conductivity. Hence, a thin MXene film with a low heat capacity per unit area (HCPUA) and special layered structure is emerging as a promising candidate to build loudspeakers. However, the use of MXenes in a sound source device has not been explored. Herein, we have successfully prepared sound source devices on an anodic aluminum oxide (AAO) and a flexible polyimide (PI) substrates by using the prepared Ti3C2 MXene nanoflakes. Due to the larger interlayer distance of MXene, the MXene-based sound source device has a higher sound pressure level (SPL) than that of graphene of the same thickness. High-quality Ti3C2 MXene nanoflakes were fabricated by selectively etching the Ti3AlC2 powder. The as-fabricated MXene sound source device on an AAO substrate exhibits a higher SPL of 68.2 dB (f = 15 kHz) and has a very stable sound spectrum output with frequency varying from 100 Hz to 20 kHz. A theoretical model has been built to explain the mechanism of the sound source device on an AAO substrate, matching well with the experimental results. Furthermore, the MXene sound source device based on a flexible PI substrate has been attached to the arms, back of the hand, and fingers, indicating an excellent acoustic wearability. Then, the MXene film is packaged successfully into a commercial earphone case and shows an excellent performance at high frequencies, which is very suitable for human audio equipment.

Light-Enhanced Ion Migration in Two-Dimensional Perovskite Single Crystals Revealed in Carbon Nanotubes/Two-Dimensional Perovskite Heterostructure and Its Photomemory Application.

Two-dimensional (2D) hybrid perovskite sandwiched between two long-chain organic layers is an emerging class of low-cost semiconductor materials with unique optical properties and improved moisture stability. Unlike conventional semiconductors, ion migration in perovskite is a unique phenomenon possibly responsible for long carrier lifetime, current-voltage hysteresis, and low-frequency giant dielectric response. While there are many studies of ion migration in bulk hybrid perovskite, not much is known for its 2D counterparts, especially for ion migration induced by light excitation. Here, we construct an exfoliated 2D perovskite/carbon nanotube (CNT) heterostructure field effect transistor (FET), not only to demonstrate its potential in photomemory applications, but also to study the light induced ion migration mechanisms. We show that the FET I-V characteristic curve can be regulated by light and shows two opposite trends under different CNT oxygen doping conditions. Our temperature-dependent study indicates that the change in the I-V curve is probably caused by ion redistribution in the 2D hybrid perovskite. The first principle calculation shows the reduction of the migration barrier of I vacancy under light excitation. The device simulation shows that the increase of 2D hybrid perovskite dielectric constant (enabled by the increased ion migration) can change the I-V curve in the trends observed experimentally. Finally, the so synthesized FET shows the multilevel photomemory function. Our work shows that not only we could understand the unique ion migration behavior in 2D hybrid perovskite, it might also be used for many future memory function related applications not realizable in traditional semiconductors.

A hardware Markov chain algorithm realized in a single device for machine learning.

There is a growing need for developing machine learning applications. However, implementation of the machine learning algorithm consumes a huge number of transistors or memory devices on-chip. Developing a machine learning capability in a single device has so far remained elusive. Here, we build a Markov chain algorithm in a single device based on the native oxide of two dimensional multilayer tin selenide. After probing the electrical transport in vertical tin oxide/tin selenide/tin oxide heterostructures, two sudden current jumps are observed during the set and reset processes. Furthermore, five filament states are observed. After classifying five filament states into three states of the Markov chain, the probabilities between each states show convergence values after multiple testing cycles. Based on this device, we demo a fixed-probability random number generator within 5% error rate. This work sheds light on a single device as one hardware core with Markov chain algorithm.

Millimeter-Scale Nonlocal Photo-Sensing Based on Single-Crystal Perovskite Photodetector.

Organometal trihalide perovskites (OTPs) are promising optoelectronic materials for high-performance photodetectors. However, up to now, traditional polycrystal OTP-based photodetectors have demonstrated limited effective photo-sensing range. Recently, bulk perovskite single crystals have been seen to have the potential for position-sensitive photodetection. Herein, for the first time, we demonstrate a position-dependent photodetector based on perovskite single crystals by scanning a focused laser beam over the device perpendicular to the channel. The photodetector shows the best-ever effective photo-sensing distance up to the millimeter range. The photoresponsivity and photocurrent decrease by nearly an order of magnitude when the beam position varies from 0 to 950 µm and the tunability of carrier diffusion length in CH3NH2PbBr3 with the variation of the exciting laser intensity is demonstrated. Furthermore, a numerical model based on transport of photoexcited carriers is proposed to explain the position dependence. This photodetector shows excellent potential for application in future nanoelectronics and optoelectronics systems.