Enhanced Recovery of Local Anesthesia in Pediatric Patients: The Impact of Photobiomodulation on Reversing Anesthesia Effects.

BACKGROUND The split-mouth study design is used in oral health research and usually consists of 2 treatments randomly assigned to either the right or left side. This split-mouth study aimed to evaluate the efficacy of photobiomodulation on reversal of local anesthesia in 50 children aged 8-10 years. MATERIAL AND METHODS The study was conducted among 50 children: 27 girls and 23 boys, aged 8-10 years (mean age 9.38±1.15 years), who presented 2 carious maxillary permanent molars. One side was randomly assigned to the laser group (50 teeth), and the contralateral side to the control group (50 teeth). At the end of the treatment, photobiomodulation (PBM) was performed in the area of infiltration at 6 points, with 635 nm (25 children) (250 mW, 500 mW/cm², 15J) and 808 nm (25 children) (200 mW, 400 mW/cm², 12J) (SmartM PRO, Lasotronix, Poland). On the contralateral side, the laser's off-mode applicator was used. Anesthetic effect was evaluated by palpation test (soft tissues) and electrical test (dental pulp). RESULTS After 15 minutes, in the laser group the return to normal sensations in the palpation test showed 88% (808 nm) and 68% (635 nm), and only 20% in the control group (P=0.04123). After 45 minutes, all the participants from the PBM group returned to normal sensations (P=0.21458). Dental pulp's excitability threshold was lower for both wavelengths compared to the control group (P=0.000001). CONCLUSIONS The identification of factors accelerating the recovery time to normal function, such as PBM, can be used as important data to eliminate self-injury secondary to local anesthesia (LA) in children.

A Molecular Approach for Detecting Bacteria and Fungi in Healthcare Environment Aerosols: A Systematic Review.

Molecular methods have become integral to microbiological research for microbial identification. This literature review focuses on the application of molecular methods in examining airborne bacteria and fungi in healthcare facilities. In January 2024, a comprehensive electronic search was carried out in esteemed databases including PubMed, Web of Science, and Scopus, employing carefully selected keywords such as ((bacteria) OR (virus) OR (fungi)) AND (aerosol) AND ((hospital) OR (healthcare) OR (dental office)) AND ((molecular) OR (PCR) OR (NGS) OR (RNA) OR (DNA) OR (metagenomic) OR (microarray)), following the PRISMA protocol. The review specifically targets healthcare environments with elevated concentrations of pathogenic bacteria. A total of 487 articles were initially identified, but only 13 met the inclusion criteria and were included in the review. The study disclosed that the prevalent molecular methodology for appraising aerosol quality encompassed the utilization of the PCR method, incorporating either 16S rRNA (bacteria) or 18S rRNA (fungi) amplification techniques. Notably, five diverse molecular techniques, specifically PFGE, DGGE, SBT, LAMP, and DNA hybridization methods, were implemented in five distinct studies. These molecular tests exhibited superior capabilities compared to traditional bacterial and fungal cultures, providing precise strain identification. Additionally, the molecular methods allowed the detection of gene sequences associated with antibiotic resistance. In conclusion, molecular testing offers significant advantages over classical microbiological culture, providing more comprehensive information.

Effectiveness of lasers and aPDT in elimination of intraoral halitosis: a systematic review based on clinical trials.

In recent years, there has been increasing interest in research showing positive results in antimicrobial photodynamic therapy (aPDT) and laser therapy (LT) in dentistry. The authors of this review tried to answer the question: "Is the effectiveness of lasers and aPDT in the elimination of intraoral halitosis possible?" For this purpose, the electronic database of PubMed and Cochrane Library were searched until September 2021 using a combination of different keywords: (bad breath OR fetor ex ore OR halitosis OR oral malodor) AND (laser OR PDT OR PACT OR photodynamic inactivation OR photodynamic therapy OR photodynamic antimicrobial chemotherapy). Initially, 83 studies were identified. A total of 9 articles were qualified after the application of the eligibility criteria. Eight works concerned aPDT treatment, and only one dedicated to the Er,Cr:YSGG laser. A significant reduction in halitosis occurred immediately after both LT and aPDT. The review found the confirmation of the effectiveness of laser therapy in reducing the number of volatile sulfur compounds (VSC) and the amount of anaerobic bacteria responsible for VSC formation. In most studies, a positive effect was observed for a 1-week follow-up. Laser therapy (aPDT, Er,Cr:YSGG) effectively eliminates microorganisms that produce volatile compounds and can effectively eliminate bad breath for the longer period of time than traditional methods of combatting this ailment.

The In Vitro Effect of Laser Irradiation (Er:YAG and CO2) and Chemical Reagents (Hydrogen Peroxide, Sodium Hypochlorite, Chlorhexidine, or Sodium Fluoride) Alone or in Combination on Reducing Root Caries Bacteria.

(1) Lasers have been used for the treatment of dentinal hypersensitivity and bacterial reductions in periodontology. The purpose of this in vitro study was to evaluate the effect of Carbon Dioxide (CO2) and Erbium-doped Yttrium Aluminum Garnet (Er:YAG) lasers with chlorhexidine (CHX), hydrogen peroxide (H2O2), sodium hypochlorite (NaOCl), or sodium fluoride (NaF) on the viability of oral bacteria associated with root caries. (2) Streptococcus mutans, Streptococcus sanguinis, and Enterococcus faecalis were grown in Brain Heart Infusion (BHI) broth, diluted to an OD660 of 0.5, and treated with antiseptics with or without simultaneous irradiation with the Er:YAG and CO2 lasers for 30 s repeated three times. The treatment groups consisted of 1: no treatment, 2: 0.5% H2O2 alone, 3: 0.5% NaOCl alone, 4: 0.12% CHX alone, 5: 2% NaF alone, 6: laser alone, 7: laser with 0.5% H2O2, 8: laser with 0.5% NaOCl, 9: laser with 0.12% CHX, and 10: laser with 2% NaF for both lasers. The microbial viability was determined through plating and viable colonies were counted, converted into CFU/mL, and transformed into log form. The statistical analysis was performed using a two-tailed paired t-test. (3) The use of CO2 and Er:YAG lasers alone failed to show statistically significant antibacterial activity against any of the bacteria. The only effective monotreatment was CHX for S. mutans. The combined treatment of 0.5% NaOCl with Er:YAG produced the greatest reduction in overall viability. (4) The combination of the Er:YAG laser with 0.5% NaOCl resulted in the largest reduction in bacterial survival when compared to monotherapies with antimicrobial solutions or lasers.

Erbium laser-assisted ceramic debonding: a scoping review.

PURPOSE: Removal of ceramic restorations and appliances can be time consuming, invasive, and inconvenient. Erbium lasers offer an alternative noninvasive method for debonding of ceramic appliances. This paper aims to provide a comprehensive review of current literature on the effectiveness of erbium lasers for removal of ceramic restorations and appliances from natural teeth and dental implants. METHODS: A comprehensive search of 7 databases, including Medline (Ovid), Embase, Dentistry and Oral Sciences Source (DOSS), Web of Science, Cochrane Library, and ProQuest Dissertations and Theses was performed. The inclusion and exclusion criteria were agreed prior to the literature search. Two reviewers independently screened the title and abstract. A third reviewer then broke the tie, if any. The selected articles then underwent full text review and the data was extracted. RESULTS: The search identified 4117 unique articles published through June 10, 2021. Studies were assessed and categorized based on the type of restoration/appliance, type of abutment, type of laser, laser settings, efficacy of debonding, and pulpal temperature rise. Thirty-eight full-text articles were reviewed for inclusion. Time for ceramic debonding varies depending on the type of restorations and materials. Removal of zirconia crowns from teeth and implant abutments requires a longer period of time compared to lithium disilicate crowns. Temperature increases were reported as 5.5 degrees or less. Laser setting and laser type affect the debonding time and the increase in temperature. Examinations of debonded ceramics demonstrated no known structural damages resulting from laser applications. CONCLUSIONS: Erbium lasers are effective noninvasive tools to remove all ceramic restorations/appliances from natural teeth and implant abutments without causing harm to abutments. Laser-assisted debonding should be considered as a viable alternative to rotary instrumentation for ceramic crowns; however, clinical studies of erbium-assisted ceramic retrieval are needed.

Photobiomodulation Therapy in the Treatment of Oral Mucositis-A Case Report.

In 2021, our group published a laboratory study on the impact of PBM on human gingival fibroblasts. The in vitro results confirmed the fact that the appropriately selected wavelength and properly selected parameters of the laser settings can increase cell proliferation, modulate inflammatory markers, and decrease the susceptibility of human gingival fibroblasts to apoptosis. Therefore, this case report was aimed at the clinical evaluation of the proposed settings and treatment regimen in a very difficult situation of an immunocompromised patient with extensive changes and stagnation of symptoms for many weeks. A 65-year-old man, during his oncological treatment, was diagnosed with oral mucositis grade 3 according to the World Health Organization and National Cancer Institute scales. Due to pain sensation, long-lasting and not healing oral lesions, and problems with solid food intake, he was qualified for laser photobiomodulation therapy. For the management of oral lesions, a diode laser 635 nm (SmartMPro, Lasotronix, Poland) was intraorally applied at an energy density of 4 J/cm2, the 20 s of irradiation, the output power of 100 mW, and in continuous wave mode. Seven treatment procedures were performed two times a week using the spot technique in contact and non-contact mode. Within 21 days of monotherapy, all ailments disappeared. The patient was also able to reuse dental dentures and return to a solid diet. The obtained results confirm the efficiency of at least 3 PBM protocols. Our case shows that the use of PMB therapy contributes to faster healing of painful oral lesions in oncological patients, and thus the treatment time and return to the appropriate quality of life is shorter.

Influence of Incubation Time on Ortho-Toluidine Blue Mediated Antimicrobial Photodynamic Therapy Directed against Selected Candida Strains-An In Vitro Study.

(1) Background and the aim: The appropriate incubation time in the antimicrobial photodynamic therapy protocol seems to have a huge impact on the efficacy of this process. This is particularly important in relation to Candida strains, due to the size of these cells and the presence of the cell wall. The aims of this study were to determine the optimal incubation time needed for the absorption of toluidine blue by cells of C. albicans, C. glabrata, C. krusei and C. parapsilosis using direct observation by optical microscopy, and to evaluate the efficacy of TBO-mediated aPDT on planktonic cells of these strains. (2) Methods: The microscopic evaluation consisted of taking a series of images at a magnification of 600× and counting the % of stained cells. The in vitro effect of TBO-mediated aPDT combined with a diode laser (635 nm, 400mW, 12 J/cm2, CW) on the viability of yeast cells with different incubation times was evaluated. (3) Results: The presence of TBO within the cytoplasm was observed in all tested Candida strains and at all microscopic evaluation times. However, the highest percentages of cells were stained at 7 and 10 min. The highest % reduction of CFU/mL after TBO-mediated aPDT against Candida was obtained for the strain C. albicans ATCC 10,231 and it was 78.55%. (4) Conclusions: TBO-mediated aPDT against Candida was effective in reducing the number of CFU/mL at all assessed incubation times. However, the most efficient period for almost all strains was 7-10 min.

Effect of ozone and diode laser (635 nm) in reducing orthodontic pain in the maxillary arch-a randomized clinical controlled trial.

The effect of ozone, diode laser irradiation, and presence of teeth crowding/spacing on pain perception in orthodontic patient was tested. Overall, 76 patients [55 women and 21 men; age 35.1(6.4) years] who met the inclusion criteria participated in the study. Immediately after fixed orthodontic appliance placement, the patients were exposed to a pain relief treatment (one single session) using either 635-nm diode laser (SmartM, Lasotronix, Warsaw, Poland) or ozone therapy (OzoneDTA, Apoza, New Taipei City, Taiwan) by placing the handpieces in the area of each teeth apex and interdental papillae, from the maxillary right first molar to the maxillary left first molar. Subjects were divided into three groups: control group (G1, n = 26), ozone (G2, n = 26, exposed to ozone therapy, generator probe type 3, working time per point 5 s, 23 points, application time 1 min and 55 s), and laser group (G3, n = 25, exposed to continuous mode diode laser, 400 mW, handpiece diameter 8 mm, spot area 0.5024 cm2, power density per second 1.59 W/cm2, dose 2 J per point, time: 5 s per point, 23 points, total energy per session 46 J, application time 1 min and 55 s). The level of teeth crowding was assessed using the Lundstrom indicator. The patients received a questionnaire for pain assessment (the Numeric Rating Scale, NRS-11, grade level 0-10) and recorded at 7 time points (1 h, 6 h, and 1, 2, 3, 4, and 5 days ) after the fixed orthodontic appliance placement. The mean pain values for the diode laser, ozone, and control group were 3.6 (1.31) (95% CI, 2.95-4.25), 5.25 (3.37) (95% CI, 3.52-6.98), and 5.75 (2.40) (95% CI, 4.69-6.81), respectively. We observed lower pain values in the diode laser group compared to the control group (p = 0.0237). The use of ozone in this study did not result in significant pain reduction in comparison to control (p = 0.8040) and laser groups (p = 0.1029). There were no differences in pain perception between patients with crowded teeth and non-crowded teeth in each group (G1, p = 0.66, G2, p = 0.86, G3, p = 0.24). The use of 635-nm diode laser led to decreased pain perception; however, ozone and presence of teeth crowding/spacing did not affect the pain perception in orthodontic patients during the first 5 days after the fixed orthodontic appliance placement.

Effects of Nd:YAG laser irradiation on the growth of Candida albicans and Streptococcus mutans: in vitro study.

The purpose of this study was to evaluate the effects of Nd:YAG laser with flat-top handpiece on the in vitro growth of Candida albicans and Streptococcus mutans. The incidence of C. albicans (opportunistic commensal) and S. mutans (facultatively anaerobic) infections is increasing, despite available treatments. Cultures of Streptococcus mutans and Candida albicans were irradiated using Nd:YAG laser (LightWalker, Fotona) with flat-top handpiece (Genova, LightWalker, Fotona) at the following parameters: group G1: 0.25 W, 10 Hz, 15 s, 3 J and group G2: 1 W, 10 Hz, 60s, 59 J. The results were evaluated directly and 24 h after irradiation using a quantitative culture method (estimation of colony-forming units in 1 ml of suspension, cfu/ml), and microscopic analysis with Janus green stain and compared with control group in which laser was not applied. C. albicans was reduced by 20 up to 54% for G1, and for G2 by 10 up to 60% directly after the application. The cfu/ml values for S. mutans decreased by 13% (p = 0.1771) for G1 and 89% (p < 0.0001) for G2. In both test groups 24 h after the application, the number of colony-forming units decreased by 15-46% for G1 and by 15-64% for G2. The arrested cell division, increasing the surface area and increasing the number of metabolically inactive cells, were observed in morphometric analysis. Macroscopic and microscopic analyses revealed a reduction in cell number and a significant decrease of cell metabolism after laser application for both C. albicans and S. mutans.

Retrieval of Glass Fiber Post Using Er:YAG Laser and Conventional Endodontic Ultrasonic Method: An In Vitro Study.

PURPOSE: To compare the times and temperatures used to remove a glass fiber post from an endodontically treated tooth using erbium-doped yttrium aluminum garnet (Er:YAG) compared to conventional endodontic ultrasonic method. MATERIALS AND METHODS: Thirty-four single-root human extracted teeth were endodontically treated ex vivo. The post space was prepared to 7 mm in depth and a 11.4 mm glass fiber post was cemented using composite resin cement. Specimens were kept in 100% humidity for 24 hours and then randomly assigned to Er:YAG laser or ultrasonic methods for post removal. The removal time was recorded. Specimens with a fractured post during the removal process were excluded. The temperature on the external surface of the root was measured at the coronal, middle, and apical third portions during the laser or ultrasonic applications from 1 to 10 minutes. Data were analyzed using one-tailed t-test and paired t-test (ɑ = 0.01) for the post removal time and temperature difference, respectively. The specimen surfaces were examined using scanning electron microscopy (SEM). RESULTS: Fifteen specimens were tested in each group. Four specimens were fractured, 2 in the laser and 1 in ultrasonic group. One post was excluded because of laser tip damage. The average removal time were 98 ± 46.1 seconds for Er:YAG laser and 538 ± 215.6 seconds or ultrasonic groups with significant difference between the groups (p < 0.001). The temperature (°C) ranges measured from 1 to 10 minutes were [24.2°, 27.3°] for laser and [33.0°, 38.0°] for ultrasonic in the cervical area, [22.1°,24.6°] for laser and [31.0°, 34.6°] for ultrasonic in the middle area, and [24.4°, 27.7°] for laser and [30.3°, 34.1°] for ultrasonic in the apical area. There were significant differences between temperatures for each treatment (p < 0.001). SEM examination showed no visible damage caused by treatment with Er:YAG laser. CONCLUSIONS: Er:YAG laser can remove posts up to 5 times faster than ultrasonic removal method. The laser causes lower temperature increase at the root surface compared to the ultrasonic removal. Er:YAG may be considered as a viable alternative to sonication for post removal.

In Vitro Examination of the Use of Er:YAG Laser to Retrieve Lithium Disilicate Crowns from Titanium Implant Abutments.

PURPOSE: Removal of cement-retained implant crowns can be difficult and often requires sectioning of the prosthesis by rotary instruments. This study aimed to measure how much time is required in crown removal and the temperature changes when erbium-doped yttrium aluminum garnet (Er:YAG) laser was used to retrieve lithium disilicate crowns from titanium implant abutments luted with composite resin (CR) cement and resin-modified glass ionomer (RMGI). MATERIALS AND METHODS: Forty identical lithium disilicate crowns were fabricated for prefabricated titanium abutments. CR and RMGI cements were used to lute the crowns, 20 specimens for each cement. Specimens were kept in 100% humidity for 48 hours. Er:YAG laser was then used to facilitate the crown retrieval. The retrieval time was recorded. The temperature changes at the abutment level for each type of cement were recorded during irradiation of 10 specimens for each type of cement from 1 to 10 minutes. Data were analyzed using t-test (ɑ = 0.01) and paired t-test (ɑ = 0.05). The surfaces of the crown and the abutment were further examined using scanning electron microscopy (SEM). RESULTS: The average times of crown removal from titanium abutments were 196.5 seconds for CR and 97.5 seconds for RMGI groups with statistical significance (p < 0.001). The temperatures measured from 1 to 10 minutes of irradiation ranged from 18° to 20.8° for CR and 18° to 23° for RMGI at the abutment surface, and 22.1° to 24.6° for CR and 22° to 24.8° for RMGI at the crown surface. No statistical differences were observed between temperature changes at the abutment or the crown for each cement (p = 0.63); however, there was a statistically significant difference between the temperatures at the abutment and crown for both cements (p < 0.001). SEM examination showed no visible damage caused by treatment with Er:YAG laser. CONCLUSIONS: It is faster to remove lithium disilicate crowns from titanium implant abutments when luted with RMGI compared to CR cement. The temperature rise was higher in the crown compared to the abutment. The type of cement had no effects on temperature changes. Heat generated from Er:YAG irradiation does not appear to be high enough to have any adverse effect on implant osseointegration.

Er:YAG laser, piezosurgery, and surgical drill for bone decortication during orthodontic mini-implant insertion: primary stability analysis-an animal study.

It is important to identify factors that affect primary stability of orthodontic mini-implants because it determines the success of treatment. We assessed mini-implant primary stability (initial mechanical engagement with the bone) placed in pig jaws. We also assessed mini-implant insertion failure rate (mini-implant fracture, mini-implants to root contact). A total of 80 taper-shaped mini-implants (Absoanchor® Model SH1312-6; Dentos Inc., Daegu, Korea) 6 mm long with a diameter of 1.1 mm were used. Bone decortication was made before mini-implant insertion by means of three different methods: Group G1: Er:YAG laser (LiteTouch®, Light Instruments, Yokneam, Israel) at energy of 300 mJ, frequency 25 Hz, fluence 38.2 J/cm2, cooling 14 ml/min, tip 1.0 × 17 mm, distance 1 mm, time of irradiation 6 s; Group G2: drill (Hager & Meisinger GmbH, Hansemannstr, Germany); Group G3: piezosurgery (Piezotom Solo, Acteon, NJ, USA). In G4 group (control), mini-implants were driven by a self-drilling method. The primary stability of mini-implants was assessed by measuring damping characteristics between the implant and the tapping head of Periotest device (Gulden-Medizinteknik, Eschenweg, Modautal, Germany). The results in range between - 8 to + 9 allowed immediate loading. Significantly lower Periotest value was found in the control group (mean 0.59 ± 1.57, 95% CI 0.7, 2.4) as compared with Er:YAG laser (mean 4.44 ± 1.64, 95% CI 3.6, 5.3), piezosurgery (mean 17.92 ± 2.73, 95% CI 16.5, 19.3), and a drill (mean 5.91 ± 1.52, 95% CI 5.2, 6.6) (p < 0.05). The highest failure rate (33.3%) during mini-implant insertion was noted for self-drilling method (G4) as compared with G1, G2, and G3 groups (p < 0.05). The small diameter decortication by Er:YAG laser appeared to provide better primary stability as compared to drill and piezosurgery. Decortication of the cortical bone before mini-implant insertion resulted in reduced risk of implant fracture or injury of adjacent teeth. The high initial stability with a smaller diameter of the mini-implant resulted in increased risk of fracture, especially for a self-drilling method.

[The influence of selected plants on the tobacco smoking-induced effects in the oral cavity--review]. / Wplyw wybranych zwiazków roslinnych na ograniczenie skutków palenia tytoniu w jamie ustnej--przeglad literatury.

Tobacco smoking is a culprit of many pathological lesions on the oral mucosa. In this literature review we focused on various therapeutic options for tobacco induced mucosal pathologies. Many active ingredients of Aloe vera, Chamomile, Curcuma longa and Calendula show potent anti-inflammatory and regenerative activity, making plant derived drugs a reasonable option for traditional pharmaceuticals.

Analysis of aerosol generation during Er:YAG laser-assisted caries treatment: A randomized clinical trial.

BACKGROUND: Maintaining biosafety in dental practice involves the effective elimination of aerosols produced during dental treatment. OBJECTIVES: To assess the quantity of aerosols and aerobic bacteria in the air during the treatment of caries. MATERIAL AND METHODS: The study involved 60 patients with a total of 60 molar teeth (n = 60) in the mandible who were divided into 2 groups based on caries treatment method. Group 1 (G1, n = 30) received treatment with a conventional dental turbine (W&H Synea TA-98LC; W&H, Burmoos, Austria), while group 2 (G2, n = 30) underwent treatment with an Er:YAG (erbium-doped yttrium aluminium garnet) laser (LightWalker, Fotona, Slovenia). Measurements of aerosol particles between 0.3 Em and 10.0 Em near the operatorfs mouth were taken using the PC200 laser particle counter (Trotec GmbH, Schwerin, Germany). The number of aerobic bacteria in the air was determined using 60 Petri plates with a microbiological medium (Columbia agar with 5% sheep blood) and the sedimentation method. A control group (G3) was established to measure initial aerosol levels and initial total number of bacteria colony-forming units (CFUs) before each treatment. RESULTS: In G1 (dental turbine), the median value of aerosol particles was 57,021 (42,564.67,568), while in G2 (Er:YAG laser), it was significantly lower at 33,318 (28,463.35,484) (p < 0.001). The median total bacteria count per cubic meter of air in G1 (conventional dental turbine + high volume evacuator (HVE)), G2 (Er:YAG laser + HVE) and G3 (control group before caries treatment) were 734 (420.988), 158 (96.288) and 48 (32.74), respectively, with a statistically significant difference between the groups (p < 0.001). CONCLUSIONS: The use of Er:YAG laser during caries treatment resulted in a 41.6% reduction in aerosol amounts and a 78.5% decrease in the total bacterial count (TBC) compared to treatment with a dental turbine.

Full operating parameter recording as an essential component of the reproducibility of laser-tissue interaction and treatments.

BACKGROUND: The number and diversity of published peer-reviewed studies in the discipline of laser dentistry have grown considerably during the past 10 years. OBJECTIVES: Within primary research, the development of protocols to guide and formulate clinical practice demands precision and ease of reproducibility. Errors in data acquisition and management may become amplified as the applied randomized clinical trials (RCTs) forge new levels of clinical diversity and predictability in the use of laser photonic energy in both ablative (surgical) and sub-ablative (photobiomodulation (PBM) or photodynamic therapy (PDT)) applications. MATERIAL AND METHODS: A comprehensive range of empirical and computational operating parameters must be included in published studies to facilitate the uniformity of powerand time-related values of laser irradiation. RESULTS: Choosing the correct "tissue irradiation parameters" is difficult and depends on the pathology and symptoms, the surface area to be treated, laser wavelength, the thermal relaxation time of each targeted tissue, and controlling penetration depth of the light into tissues. Therefore, to allow the reproducibility of the results, it is recommended that authors mention with the greatest care and clarity the irradiation parameters used in their study. CONCLUSION: This paper outlines the concerns felt regarding the general shortfalls and proposes a minimum range of laser operating parameters that should be represented in future peer-reviewed publications.

Red/Orange Autofluorescence in Selected Candida Strains Exposed to 405 nm Laser Light.

BACKGROUND: Candida albicans and similar species are significant pathogens in immunocompromised and hospitalized individuals, known for mucosal colonization and bloodstream/organ invasion. Many pathogenic fungi, including these species, exhibit autofluorescence (R/OF) under specific light conditions, a feature crucial for their detection. AIM: We investigated the use of a 405 nm diode laser for the direct observation of red/orange autofluorescence of Candida spp., common in the oral cavity, exploring its potential in health screenings. METHODS: This study utilized cultures of Candida spp. on Sabouraud dextrose agar with Qdot 655 and 685 for fluorescence benchmarking, illuminated using a 405 nm diode laser (continuous wave, power 250 mW, 0.0425 J/cm² fluence, 0.0014 W/cm² power density). Images were captured using a yellow-filter camera at set intervals (48 to 144 h). Visual and computational analyses evaluated the R/OF in terms of presence, intensity, coloration, and intra-colony variation. RESULTS: Most Candida strains displayed red/orange autofluorescence at all observation times, characterized by varied coloration and intra-colony distribution. Initially, there was an increase in R/OF intensity, which then stabilized in the later stages of observation. CONCLUSIONS: The majority of the Candida strains tested are capable of emitting R/OF under 405 nm laser light. This finding opens up new possibilities for integrating R/OF detection into routine dental screenings for Candida spp.

The Presence of Women in the Dental Profession: A Global Survey.

OBJECTIVES: The aim of this research was to acquire knowledge about the female dental workforce, identifying factors to pursue specialty training and career choices and working in dental institutions/associations. METHODS: An original online questionnaire was developed, validated (n = 22), and sent to 189 member associations in 133 countries of the Women Dentists Worldwide section of the FDI World Dental Federation. RESULTS: In all, 3232 female dentists from 81 countries participated. Results were divided into 5 geographic areas by continent. Difference in proportion amongst questionnaire items was evaluated with χ2 test or Fisher exact test. Ordinal multinomial linear regression analysis was performed to evaluate the association of questionnaire items with total work experience in dentistry (in years), motivation to study dentistry, type of specialisation, working hours per week, perception of female dentists about working hours, sex-based inequalities, job security after maternity leaves, as well as involvement in political organisations within their country of residence and their role in dental associations. A majority of participating female dentists are self-employed (57.7%), and 60.0% have 10 to 30 years of experience. The most popular form of practice is the single private practice (29.7%), followed by the group private practice (28.8%). Further, 44.8% work 31 to 40 h/wk, 29.1% part-time up to 30 h/wk, and 26.0% more than 40 h/wk. CONCLUSIONS: Women are still poorly represented in professional organisations, and few are officers in representative assemblies, members of the board, or president. Family life with children influences perceptions and has an impact on professional life, especially in academia and political/professional associations, so that taking on leadership positions poses additional challenges.

Photodynamic Therapy with Tolonium Chloride and a Diode Laser (635 nm) in the Non-Surgical Management of Periodontitis: A Clinical Study.

This study aimed to evaluate the efficacy of photodynamic therapy (PDT) using tolonium chloride and a 635 nm diode laser as an adjunct to non-surgical periodontitis treatment, specifically scaling and root planing (SRP) alone. A total of 32 patients with a pocket probing depth > 5 mm were included in the study. Among them, 16 patients underwent SRP alone (control group), and the remaining 16 patients received SRP along with PDT (study group). The PDT procedure utilized a 635 nm diode laser (Smart M, Lasotronix, Poland) and tolonium chloride. Clinical periodontal parameters, such as the plaque index (PI), bleeding on probing (BOP), gingival recession (GR), probing pocket depth (PPD), and clinical attachment loss (CAL), were assessed before treatment (T0) and at 3 months after treatment (T3). At T3, both groups demonstrated a significant reduction in the PI, BOP, PD, and CAL compared to T0. The SRP + PDT group displayed a significant reduction in PPD (3.79 mm ± 0.35) compared to the SRP alone group (4.85 mm ± 0.42) at T3. Furthermore, the SRP + PDT group exhibited a significant reduction in CAL (5.01 ± 0.81) compared to the SRP group (5.99 ± 1.08) at T3. Within the study's limitations, it was concluded that PDT, with tolonium chloride and a 635 nm diode laser, significantly contributed to the non-surgical treatment of periodontitis.

Quantitative Evaluation of Aerosols Produced in the Dental Office during Caries Treatment: A Randomized Clinical Trial.

BACKGROUND: Effective removal of aerosols generated during dental treatment is crucial for maintaining biosafety in dental practice. This study aimed to measure the aerosol amount and the number of aerobic bacteria in the air during caries treatment. METHODS: The study involved 50 molar teeth (n = 50) in the mandible in 50 patients divided into two groups based on the type of a high-volume evacuator (HVE); G1 (n = 25) conventional HVE (EM19 EVO, Monoart® Euronda, Vicenza, Italy) and G2 (n = 25) a new, wider, customized HVE. The PC200 laser particle counter (Trotec GmbH, Schwerin, Germany) was used to measure aerosol particles in a range of 0.3-10.0 µm near the operator's mouth. The study used 60 microbiological plates with a microbiological medium (Columbia Agar with 5% Sheep Blood) to check the number of aerobic bacteria in the air. RESULTS: The mean value of aerosol particles in the G1 group (conventional HVE) was 54,145 ± 7915, while in the G2 group (test, wider evacuator) was lower and amounted to 32,632 ± 1803. (p < 0.001). The median total bacteria count in the air per cubic meter in control, G1 (HVE), and G2 (NEW-HVE) groups were 50 [36-60]; 772 [643-881]; 120 [92-139], respectively. (p < 0.05). Gram-positive cocci were the predominant bacteria in the plates: Micrococcus sp. (50%), Bacillus species (36.4%), Staphylococcus epidermidis (3.8%), Staphylococcus saprophyticus (3.8%). CONCLUSIONS: the application of the wider high-volume evacuator increases the air purity during caries treatment as well as the biological safety of a dental office.

Diagnosis, management and knowledge of halitosis among Polish and Lebanese dentists: Questionnaire-based survey.

BACKGROUND: Halitosis (fetor ex ore, malodor, bad breath) is defined as an unpleasant odor coming from the oral cavity, regardless of the cause: local or systemic. It affects 22-50% of the population worldwide, leading to a significant decrease in the overall quality of life, and can have oral and extra-oral etiologies. There is an increased interest in the management of halitosis. OBJECTIVES: This study aims to evaluate the patient-dentist communication on halitosis, the dentists' knowledge about the management and etiology of halitosis, and the treatment options used by dentists who practice in Poland and Lebanon. MATERIAL AND METHODS: An online questionnaire was sent to both Lebanese and Polish dentists using Google Forms (Google LLC, Mountain View, USA). In total, 205 dentists completed the questionnaire, of which 100 practiced in Poland (group P) and 105 practiced in Lebanon (group L). A multivariate analysis was conducted to determine differences between both groups and to identify parameters that could influence a dentist's management of halitosis. RESULTS: According to the questionnaire, 86% of group P members and 65.7% of group L members reported communicating with patients about halitosis. Regarding the knowledge of halitosis, 78% of dentists in group P and 85.7% of dentists in group L reported that there is a classification for halitosis. A significant majority of dentists in both groups revealed not having any tool to measure halitosis (67.6% and 68% from group P and group L, respectively). CONCLUSIONS: This study confirms the need for improved communication skills in Polish and Lebanese dentists, as well as for education on the subject among dentists in both countries, and for standardization in diagnosis, treatment modalities and management of halitosis.