Photo-Assisted Li-N2 Batteries with Enhanced Nitrogen Fixation and Energy Conversion.

Li-N2 batteries have received widespread attention for their potential to integrate N2 fixation, energy storage, and conversion. However, because of the low activity and poor stability of cathode catalysts, the electrochemical performance of Li-N2 batteries is suboptimal, and their electrochemical reversibility has rarely been proven. In this study, a novel bifunctional photo-assisted Li-N2 battery system was established by employing a plasmonic Au nanoparticles (NPs)-modified defective carbon nitride (Au-Nv -C3 N4 ) photocathode. The Au-Nv -C3 N4 exhibits strong light-harvesting, N2 adsorption, and N2 activation abilities, and the photogenerated electrons and hot electrons are remarkably beneficial for accelerating the discharge and charge reaction kinetics. These advantages enable the photo-assisted Li-N2 battery to achieve a low overpotential of 1.32 V, which is the lowest overpotential reported to date, as well as superior rate capability and prolonged cycle stability (≈500 h). Remarkably, a combination of theoretical and experimental results demonstrates the high reversibility of the photo-assisted Li-N2 battery. The proposed novel strategy for developing efficient cathode catalysts and fabricating photo-assisted battery systems breaks through the overpotential bottleneck of Li-N2 batteries, providing important insights into the mechanism underlying N2 fixation and storage.

Polyoxometalate Li3 PW12 O40 and Li3 PMo12 O40 Electrolytes for High-energy All-solid-state Lithium Batteries.

Solid-state lithium (Li) batteries promise both high energy density and safety while existing solid-state electrolytes (SSEs) fail to satisfy the rigorous requirements of battery operations. Herein, novel polyoxometalate SSEs, Li3 PW12 O40 and Li3 PMo12 O40 , are synthesized, which exhibit excellent interfacial compatibility with electrodes and chemical stability, overcoming the limitations of conventional SSEs. A high ionic conductivity of 0.89 mS cm-1 and a low activation energy of 0.23 eV are obtained due to the optimized three-dimensional Li+ migration network of Li3 PW12 O40 . Li3 PW12 O40 exhibits a wide window of electrochemical stability that can both accommodate the Li anode and high-voltage cathodes. As a result, all-solid-state Li metal batteries fabricated with Li/Li3 PW12 O40 /LiNi0.5 Co0.2 Mn0.3 O2 display a stable cycling up to 100 cycles with a cutoff voltage of 4.35 V and an areal capacity of more than 4 mAh cm-2 , as well as a cost-competitive SSEs price of $5.68 kg-1 . Moreover, Li3 PMo12 O40 homologous to Li3 PW12 O40 was obtained via isomorphous substitution, which formed a low-resistance interface with Li3 PW12 O40 . Applications of Li3 PW12 O40 and Li3 PMo12 O40 in Li-air batteries further demonstrate that long cycle life (650 cycles) can be achieved. This strategy provides a facile, low-cost strategy to construct efficient and scalable solid polyoxometalate electrolytes for high-energy solid-state Li metal batteries.

Metal-Organic Framework-Based Mixed Conductors Achieve Highly Stable Photo-assisted Solid-State Lithium-Oxygen Batteries.

The demand for high-energy sustainable rechargeable batteries has motivated the development of lithium-oxygen (Li-O2) batteries. However, the inherent safety issues of liquid electrolytes and the sluggish reaction kinetics of existing cathodes remain fundamental challenges. Herein, we demonstrate a promising photo-assisted solid-state Li-O2 battery based on metal-organic framework-derived mixed ionic/electronic conductors, which simultaneously serve as the solid-state electrolytes (SSEs) and the cathode. The mixed conductors could effectively harvest ultraviolet-visible light to generate numerous photoelectrons and holes, which is favorable to participate in the electrochemical reaction, contributing to greatly improved reaction kinetics. According to the study on conduction behavior, we discover that the mixed conductors as SSEs possess outstanding Li+ conductivity (1.52 × 10-4 S cm-1 at 25 °C) and superior chemical/electrochemical stability (especially toward H2O, O2-, etc.). Application of mixed ionic electronic conductors in photo-assisted solid-state Li-O2 batteries further reveals that a high energy efficiency (94.2%) and a long life (320 cycles) can be achieved with a simultaneous design of SSEs and cathodes. The achievements present the widespread universality in accelerating the development of safe and high-performance solid-state batteries.

Polymers with Intrinsic Microporosity as Solid Ion Conductors for Solid-State Lithium Batteries.

Solid-state electrolytes (SSEs) with high ionic conductivity and superior stability are considered to be a key technology for the safe operation of solid-state lithium batteries. However, current SSEs are incapable of meeting the requirements for practical solid-state lithium batteries. Here we report a general strategy for achieving high-performance SSEs by engineering polymers of intrinsic microporosity (PIMs). Taking advantage of the interconnected ion pathways generated from the ionizable groups, high ionic conductivity (1.06×10-3  S cm-1 at 25 °C) is achieved for the PIMs-based SSEs. The mechanically strong (50.0 MPa) and non-flammable SSEs combine the two superiorities of outstanding Li+ conductivity and electrochemical stability, which can restrain the dendrite growth and prevent Li symmetric batteries from short-circuiting even after more than 2200 h cycling. Benefiting from the rational design of SSEs, PIMs-based SSEs Li-metal batteries can achieve good cycling performance and superior feasibility in a series of withstand abuse tests including bending, cutting, and penetration. Moreover, the PIMs-based SSEs endow high specific capacity (11307 mAh g-1 ) and long-term discharge/charge stability (247 cycles) for solid-state Li-O2 batteries. The PIMs-based SSEs present a powerful strategy for enabling safe operation of high-energy solid-state batteries.

A Renewable Light-Promoted Flexible Li-CO2 Battery with Ultrahigh Energy Efficiency of 97.9.

Directly converting and storing abundant solar energy in next-generation energy storage devices is of central importance to build a sustainable society. Herein, a new prototype of a light-promoted rechargeable and flexible Li-CO2 battery with a TiO2 /carbon cloth (CC) cathode is reported for the direct utilization of solar energy to promote the kinetics of the carbon dioxide reduction reaction and carbon dioxide evolution reaction (CO2 ER). Under illumination, photoelectrons are generated in the conduction band of TiO2 /CC, followed by the enhancing diffusion of electrons and lithium ions during the discharge process. The photoelectrons on the cathode surface can regulate the morphology of the discharge product Li2 CO3 , contributing to boosting the kinetics of the subsequent CO2 ER process. In the reverse charge process, photogenerated holes can favor the decomposition of Li2 CO3 , leading to a negative charge potential of 2.88 V without increased polarization over ≈60 h of cycling. Owing to an ultralow overpotential of 0.06 V between the discharge and charge process, an ultrahigh energy efficiency of 97.9% is attained under illumination. The introduction of a light-promoted flexible Li-CO2 battery can pave the way toward developing the use of solar energy to address the charging overpotential of conventional Li-CO2 batteries.

Light/Electricity Energy Conversion and Storage for a Hierarchical Porous In2 S3 @CNT/SS Cathode towards a Flexible Li-CO2 Battery.

A photoinduced flexible Li-CO2 battery with well-designed, hierarchical porous, and free-standing In2 S3 @CNT/SS (ICS) as a bifunctional photoelectrode to accelerate both the CO2 reduction and evolution reactions (CDRR and CDER) is presented. The photoinduced Li-CO2 battery achieved a record-high discharge voltage of 3.14 V, surpassing the thermodynamic limit of 2.80 V, and an ultra-low charge voltage of 3.20 V, achieving a round trip efficiency of 98.1 %, which is the highest value ever reported (<80 %) so far. These excellent properties can be ascribed to the hierarchical porous and free-standing structure of ICS, as well as the key role of photogenerated electrons and holes during discharging and charging processes. A mechanism is proposed for pre-activating CO2 by reducing In3+ to In+ under light illumination. The mechanism of the bifunctional light-assisted process provides insight into photoinduced Li-CO2 batteries and contributes to resolving the major setbacks of the system.

Highly Stable Organic Molecular Porous Solid Electrolyte with One-Dimensional Ion Migration Channel for Solid-State Lithium-Oxygen Battery.

Solid-state lithium-oxygen (Li-O2) batteries have been widely recognized as one of the candidates for the next-generation of energy storage batteries. However, the development of solid-state Li-O2 batteries has been hindered by the lack of solid-state electrolyte (SSE) with high ionic conductivity at room temperature, high Li+ transference number, and the high stability to air. Herein, the organic molecular porous solid cucurbit[7]uril (CB[7]) with one-dimensional (1D) ion migration channels is developed as the SSE for solid-state Li-O2 batteries. Taking advantage of the 1D ion migration channel for Li+ conduction, CB[7] SSE achieves high ionic conductivity (2.45 × 10-4 S cm-1 at 25 °C). Moreover, the noncovalent interactions facilitated the immobilization of anions, realizing a high Li+ transference number (tLi + = 0.81) and Li+ uniform distribution. The CB[7] SSE also shows a wide electrochemical stability window of 0-4.65 V and high thermal stability and chemical stability, as well as realizes stable Li+ plating/stripping (more than 1000 h at 0.3 mA cm-2). As a result, the CB[7] SSE endows solid-state Li-O2 batteries with superior rate capability and long-term discharge/charge stability (up to 500 h). This design strategy of CB[7] SSE paves the way for stable and efficient solid-state Li-O2 batteries toward practical applications.

Magnetic and Optical Field Multi-Assisted Li-O2 Batteries with Ultrahigh Energy Efficiency and Cycle Stability.

The photoassisted lithium-oxygen (Li-O2 ) system has emerged as an important direction for future development by effectively reducing the large overpotential in Li-O2 batteries. However, the advancement is greatly hindered by the rapidly recombined photoexcited electrons and holes upon the discharging and charging processes. Herein, a breakthrough is made in overcoming these challenges by developing a new magnetic and optical field multi-assisted Li-O2 battery with 3D porous NiO nanosheets on the Ni foam (NiO/FNi) as a photoelectrode. Under illumination, the photogenerated electrons and holes of the NiO/FNi photoelectrode play a key role in reducing the overpotential during discharging and charging, respectively. By introducing the external magnetic field, the Lorentz force acts oppositely on the photogenerated electrons and holes, thereby suppressing the recombination of charge carriers. The magnetic and optical field multi-assisted Li-O2 battery achieves an ultralow charge potential of 2.73 V, a high energy efficiency of 96.7%, and good cycling stability. This external magnetic and optical field multi-assisted technology paves a new way of developing high-performance Li-O2 batteries and other energy storage systems.

All-Solid-State Photo-Assisted Li-CO2 Battery Working at an Ultra-Wide Operation Temperature.

At present, photoassisted Li-air batteries are considered to be an effective approach to overcome the sluggish reaction kinetics of the Li-air batteries. And, the organic liquid electrolyte is generally adopted by the current conventional photoassisted Li-air batteries. However, the superior catalytic activity of photoassisted cathode would in turn fasten the degradation of the organic liquid electrolyte, leading to limited battery cycling life. Herein, we tame the above limitation of the traditional liquid electrolyte system for Li-CO2 batteries by constructing a photoassisted all-solid-state Li-CO2 battery with an integrated bilayer Au@TiO2/Li1.5Al0.5Ge1.5(PO4)3 (LAGP)/LAGP (ATLL) framework, which can essentially improve battery stability. Taking advantage of photoelectric and photothermal effects, the Au@TiO2/LAGP layer enables the acceleration of the slow kinetics of the carbon dioxide reduction reaction and evolution reaction processes. The LAGP layer could resolve the problem of liquid electrolyte decomposition under illumination. The integrated double-layer LAGP framework endows the direct transportation of heat and Li+ in the entire system. The photoassisted all-solid-state Li-CO2 battery achieves an ultralow polarization of 0.25 V with illumination, as well as a high round-trip efficiency of 92.4%. Even at an extremely low temperature of -73 °C, the battery can still deliver a small polarization of 0.6 V by converting solar energy into heat to achieve self-heating. This study is not limited to the Li-air batteries but can also be applied to other battery systems, constituting a significant step toward the practical application of all-solid-state photoassisted Li-air batteries.

Oxygen Vacancy-Mediated Growth of Amorphous Discharge Products toward an Ultrawide Band Light-Assisted Li-O2 Batteries.

Photoassisted electrochemical reaction is regarded as an effective approach to reduce the overpotential of lithium-oxygen (Li-O2 ) batteries. However, the achievement of both broadband absorption and long term battery cycling stability are still a formidable challenge. Herein, an oxygen vacancy-mediated fast kinetics for a photoassisted Li-O2 system is developed with a silver/bismuth molybdate (Ag/Bi2 MoO6 ) hybrid cathode. The cathode can offer both double advantages for light absorption covering UV to visible region and excellent electrochemical activity for O2 . Upon discharging, the photoexcited electrons from Ag nanoplate based on the localized surface plasmon resonance (LSPR) are injected into the oxygen vacancy in Bi2 MoO6 . The fast oxygen reaction kinetics generate the amorphous Li2 O2 , and the discharge plateau is improved to 3.05 V. Upon charging, the photoexcited holes are capable to decompose amorphous Li2 O2 promptly, yielding a very low charge plateau of 3.25 V. A first cycle round-trip efficiency is 93.8% and retention of 70% over 500 h, which is the longest cycle life ever reported in photoassisted Li-O2 batteries. This work offers a general and reliable strategy for boosting the electrochemical kinetics by tailoring the crystalline of Li2 O2 with wide-band light.