Copolymerization of ß-Butyrolactones into Functionalized Polyhydroxyalkanoates Using Aluminum Catalysts: Influence of the Initiator in the Ring-Opening Polymerization Mechanism.

Within bioplastics, natural poly(3-hydroxybutyrate) (PHB) stands out as fully biocompatible and biodegradable, even in marine environments; however, its high isotacticity and crystallinity limits its mechanical properties and hence its applications. PHB can also be synthesized with different tacticities via a catalytic ring-opening polymerization (ROP) of rac-ß-butyrolactone (BBL), paving the way to PHB with better thermomechanical and processability properties. In this work, the catalyst family is extended based on aluminum phenoxy-imine methyl catalyst [AlMeL2], that reveals efficient in the ROP of BBL, to the halogeno analogous complex [AlClL2]. As well, the impact on the ROP mechanism of different initiators is further explored with a particular focus in dimethylaminopyridine (DMAP), a hardly studied initiator for the ROP of BBL. A thorough mechanistic study is performed that evidences the presence of two concomitant DMAP-mediated mechanisms, that lead to either a DMAP or a crotonate end-capping group. Besides, in order to increase the possibilities of PHB post-polymerization functionalization, the introduction of a side-chain functionality is explored, establishing the copolymerization of BBL with ß-allyloxymethylene propiolactone (BPLOAll), resulting in well-defined P(BBL-co-BPLOAll) copolymers.

Tacticity Control of Cyclic Poly(3-Thiobutyrate) Prepared by Ring-Opening Polymerization of Racemic ß-Thiobutyrolactone.

We report here on the ring-opening polymerization (ROP) of racemic ß-thiobutyrolactone (rac-TBL), as the first chemical synthesis of poly(3-thiobutyrolactone) (P3TB), the thioester analogue of the ubiquitous poly(3-hydroxybutyrate) (P3HB). The ROP reactions proceed very fast (TOF >12 000 h-1 at r.t.) in the presence of various metal-based catalysts. Remarkably, catalyst systems based on non-chiral yttrium complexes stabilized by tetradentate amino alkoxy- or diamino-bis(phenolate) ligands {ONXOR1,R2 }2- (X=O, N) provide access to cyclic P3TB with either high isoselectivity (Pm up to 0.90) or high syndiotactic bias (Pr up to 0.70). The stereoselectivity can be controlled by manipulation of the substituents on the ligand platform and adequate choice of the reaction solvent and temperature as well. The cyclic polymer topology is evidenced by MALDI-ToF MS, NMR and TGA. Highly isotactic cyclic P3TB is a semi-crystalline material as revealed by DSC.

Recent Advances in Metal-Mediated Stereoselective Ring-Opening Polymerization of Functional Cyclic Esters towards Well-Defined Poly(hydroxy acid)s: From Stereoselectivity to Sequence-Control.

Poly(hydroxy acid)s are a family of biocompatible and (bio)degradable polyesters with various outcomes in different domains of application. To date, poly(hydroxy acid)s are best prepared by ring-opening polymerization (ROP) of the corresponding cyclic esters. Using racemic chiral monomers featuring side-chain groups enables to access, providing a stereoselective catalyst/initiator system is implemented, stereoregular functional polymers, thereby improving their physico-chemical properties, and ultimately, widening their range of uses. Here, we highlight a few important advances in metal-mediated stereoselective ROP of cyclic esters towards the synthesis of (functional) stereoregular poly(hydroxy acid)s that have recently been disclosed, emphasizing on (functional) ß- and γ-lactones, diolide and O-carboxyanhydride (OCA) monomers and yttrium-based catalysis. Fine-tuning of the substituents flanked on the catalyst ligand enables reaching poly(hydroxy acid)s with syndiotactic and also isotactic microstructures. The stereocontrol mechanisms at work and their probable origin, relying on steric but also electronic factors imparted in particular by the ligand substituents, are discussed. Taking advantage of such stereoselective ROPs, original copoly(hydroxy acid)s with gradient or alternated patterns then become accessible from the use of mixtures of chemically different, oppositely configured enantiopure monomers.

Yttrium-Mediated Ring-Opening Copolymerization of Oppositely Configurated 4-Alkoxymethylene-ß-Propiolactones: Effective Access to Highly Alternated Isotactic Functional PHAs.

The ring-opening copolymerization (ROCOP) of functional 4-alkoxymethylene-ß-propiolactones (BPLOR s) by yttrium-bisphenolate complexes was investigated. The ROCOP of equimolar mixtures of BPLOR s of opposite configurations, namely (R)-BPLOR1 /(S)-BPLOR2 [R1 , R2 =OMe, OAllyl, OCH2 Ph (=OBn), OSiMe2 tBu (=OTBDMS)], by the syndioselective Y{ONOOcum }/iPrOH catalyst/initiator system affords P(HBOR1 -alt-HBOR2 ) copolymers with high alternation degrees (altern.=89-94 %), as determined by comprehensive kinetic, 13 C{1 H} NMR spectroscopy, MALDI-ToF MS and ESI MS/MS fragmentation studies. The ROCOP of the (R)-BPLOMe /(S)-BPLOTBDMS combination, featuring a large difference in the substituents' bulkiness, constitutes the only observed exception to this trend (altern.=64 %). On the other hand, the isoselectivity of the Y{ONNOCl }/iPrOH catalyst/initiator system has been exploited to generate, in a one-pot/one-step procedure, original mixtures of isotactic poly(hydroxyalkanoate)s (PHAs). This system efficiently transforms equimolar mixtures of (R)-BPLOAll /(S)-BPLOMe into a 1:1 mixture of the corresponding isotactic iso-(R)-PHBOAll and iso-(S)-PHBOMe homopolymers; almost no copolymerization defects are observed. This new approach has been extended successfully to the ROCOP of equimolar mixtures of racemic monomers, rac-BPLOAll /rac-BPLOMe .

Highly Syndiotactic or Isotactic Polyhydroxyalkanoates by Ligand-Controlled Yttrium-Catalyzed Stereoselective Ring-Opening Polymerization of Functional Racemic ß-Lactones.

Reported herein is the first stereoselective controlled ROP of a specific family of racemic functional ß-lactones, namely 4-alkoxymethylene-ß-propiolactones (BPLOR s). This process is catalyzed by an yttrium complex stabilized by a nonchiral tetradentate amino alkoxy bisphenolate ligand {ONOOR'2 }2- , which features both a good activity and a high degree of control over the molar masses of the resulting functional poly(3-hydroxyalkanoate)s. A simple modification of the R' substituents in ortho and para position on the ligand platform allows for a complete reversal from virtually pure syndioselectivity (Ps up to 0.91 with R'=cumyl) to very high isoselectivity (Pi up to 0.93 with R'=Cl), as supported by DFT insights. This is the first example of a highly isoselective ROP of a racemic chiral ß-lactone.

Highly Stereocontrolled Ring-Opening Polymerization of Racemic Alkyl ß-Malolactonates Mediated by Yttrium [Amino-alkoxy-bis(phenolate)] Complexes.

Yttrium [amino-alkoxy-bis(phenolate)]amido complexes have been used for the ring-opening polymerization (ROP) of racemic alkyl ß-malolactonates (4-alkoxycarbonyl-2-oxetanones, rac-MLA(R) s) bearing an allyl (All), benzyl (Bz) or methyl (Me) lateral ester function. The nature of the ortho-substituent on the phenolate rings in the metal ancillary dictated the stereocontrol of the ROP, and consequently the syndiotactic enrichment of the resulting polyesters. ROP promoted by catalysts with halogen (Cl, Br)-disubstituted ligands allowed the first reported synthesis of highly syndiotactic PMLA(R) s (Pr ≥ 0.95); conversely, catalysts bearing bulky alkyl and aryl ortho-substituted ligands proved largely ineffective. All polymers have been characterized by (1) H and (13) C{(1) H} NMR spectroscopy, MALDI-ToF mass spectrometry and DSC analyses. Statistical and thermal analyses enabled the rationalization of the chain-end control mechanism. Whereas the stereocontrol of the polymerization obeyed a Markov first-order (Mk1) model for the ROP of rac-MLA(Bz) and rac-MLA(All) , the ROP of rac-MLA(Me) led to a chain end-control of Markov second-order type (Mk2). DFT computations suggest that the high stereocontrol ability featured by catalysts bearing Cl- and Br-substituted ligands does not likely originate from halogen bonding between the halogen substituent and the growing polyester chain.

Poly(trimethylene carbonate)/Poly(malic acid) Amphiphilic Diblock Copolymers as Biocompatible Nanoparticles.

Amphiphilic polycarbonate-poly(hydroxyalkanoate) diblock copolymers, namely, poly(trimethylene carbonate) (PTMC)-b-poly(ß-malic acid) (PMLA), are reported for the first time. The synthetic strategy relies on commercially available catalysts and initiator. The controlled ring-opening polymerization (ROP) of trimethylene carbonate (TMC) catalyzed by the organic guanidine base 1,5,7-triazabicyclo[4.4.0]dec-5-ene (TBD), associated with iPrOH as an initiator, provided iPrO-PTMC-OH, which served as a macroinitiator in the controlled ROP of benzyl ß-malolactonate (MLABe) catalyzed by the neodymium triflate salt (Nd(OTf)3). The resulting hydrophobic iPrO-PTMC-b-PMLABe-OH copolymers were then hydrogenolyzed into the parent iPrO-PTMC-b-PMLA-OH copolymers. A range of well-defined copolymers, featuring different sizes of segments (Mn,NMR up to 9300 g mol(-1) ; ÐM =1.28-1.40), were thus isolated in gram quantities, as evidenced by NMR spectroscopy, size exclusion chromatography, thermogravimetric analysis, differential scanning calorimetry, and contact angle analyses. Subsequently, PTMC-b-PMLA copolymers with different hydrophilic weight fractions (11-75 %) self-assembled in phosphate-buffered saline upon nanoprecipitation into well-defined nano-objects with Dh =61-176 nm, a polydispersity index <0.25, and a negative surface charge, as characterized by dynamic light scattering and zeta-potential analyses. In addition, these nanoparticles demonstrated no significant effect on cell viability at low concentrations, and a very low cytotoxicity at high concentrations only for PTMC-b-PMLA copolymers exhibiting hydrophilic fractions over 47 %, thus illustrating the potential of these copolymers as promising nanoparticles.

New Linear and Star-Shaped Thermogelling Poly([R]-3-hydroxybutyrate) Copolymers.

The synthesis of multi-arm poly([R]-3-hydroxybutyrate) (PHB)-based triblock copolymers (poly([R]-3-hydroxybutyrate)-b-poly(N-isopropylacrylamide)-b-[[poly(methyl ether methacrylate)-g-poly(ethylene glycol)]-co-[poly(methacrylate)-g-poly(propylene glycol)]], PHB-b-PNIPAAM-b-(PPEGMEMA-co-PPPGMA), and their subsequent self-assembly into thermo-responsive hydrogels is described. Atom transfer radical polymerization (ATRP) of N-isopropylacrylamide (NIPAAM) followed by poly(ethylene glycol) methyl ether methacrylate (PEGMEMA) and poly(propylene glycol) methacrylate (PPGMA) was achieved from bromoesterified multi-arm PHB macroinitiators. The composition of the resulting copolymers was investigated by (1) H and (13) C J-MOD NMR spectroscopy as well as size-exclusion chromatography (SEC), thermogravimetric analysis (TGA), and differential scanning calorimetry (DSC). The copolymers featuring different architectures and distinct hydrophilic/hydrophobic contents were found to self-assemble into thermo-responsive gels in aqueous solution. Rheological studies indicated that the linear one-arm PHB-based copolymer tend to form a micellar solution, whereas the two- and four-arm PHB-based copolymers afforded gels with enhanced mechanical properties and solid-like behavior. These investigations are the first to correlate the gelation properties to the arm number of a PHB-based copolymer. All copolymers revealed a double thermo-responsive behavior due to the NIPAAM and PPGMA blocks, thus allowing first the copolymer self-assembly at room temperature, and then the delivery of a drug at body temperature (37 °C). The non-significant toxic response of the gels, as assessed by the cell viability of the CCD-112CoN human fibroblast cell line with different concentrations of the triblock copolymers ranging from 0.03 to 1 mg mL(-1) , suggest that these PHB-based thermo-responsive gels are promising candidate biomaterials for drug-delivery applications.

Beyond stereoselectivity, switchable catalysis: some of the last frontier challenges in ring-opening polymerization of cyclic esters.

Metal-based catalysts and initiators have played a pivotal role in the ring-opening polymerization (ROP) of cyclic esters, thanks to their high activity and remarkable ability to control precisely the architectures of the resulting polyesters in terms of molar mass, dispersity, microstructure, or tacticity. Today, after two decades of extensive research, the field is slowly reaching maturity. However, several challenges remain, while original concepts have emerged around new types or new applications of catalysis. This Review is not intended to comprehensively cover all of these aspects. Rather, it provides a personal overview of the very recent progress achieved in some selected, important aspects of ROP catalysis--stereocontrol and switchable catalysis. Hence, the first part addresses the development of new metal-based catalysts for the isoselective ROP of racemic lactide towards stereoblock copolymers, and the use of syndioselective ROP metal catalysts to control the monomer sequence in copolymers. A second part covers the development of ROP catalysts--primarily metal-based catalysts, but also organocatalysts--that can be externally regulated by the use of chemical or photo stimuli to switch them between two states with different catalytic abilities. Current challenges and opportunities are highlighted.

PMLABe diol synthesized by ring-opening polymerization of racemic benzyl ß-malolactonate initiated by rare-earth trisborohydride complexes: an experimental and DFT study.

Polymer diols are a class of polymeric building blocks of high interest for the synthesis of complex macromolecular edifices. Rare-earth borohydride complexes are known as efficient initiators for the ring-opening polymerization (ROP) of cyclic esters, directly affording α,ω-dihydroxy-telechelic polyesters. Here, were report the direct synthesis of poly(benzyl ß-malolactonate) (PMLABe) diols, from the ROP of racemic (benzyl ß-malolactonate) (rac-MLABe), a valuable and renewable monomer, initiated by the homoleptic [Ln(BH4 )3 (thf)3 ] (Ln=La, Nd, and Sm) complexes. These initiators enabled the controlled ROP of this ß-lactone, affording well-defined syndiotactic-enriched (Pr ≈0.83) PMLABes (Mn up to 21 300 g mol(-1) , ÐM ≈1.5) as evidenced by size exclusion chromatography, (1) H and (13) C NMR spectroscopy, and MALDI-ToF mass spectrometry analyses. The first and second insertions of rac-MLABe, as assessed by DFT calculations, revealed more favorable stationary front-side than migratory back-side insertions, the thermodynamically and kinetically competitive ROP on two distinct arms with that on a one arm-only, and the thermodynamically slightly favored formation of syndiotactic-enriched PMLABes.

From syndiotactic homopolymers to chemically tunable alternating copolymers: highly active yttrium complexes for stereoselective ring-opening polymerization of ß-malolactonates.

Alternating copolymers constitute an attractive class of materials. It was shown previously that highly alternated poly(ß-hydroxyalkanoate)s (PHAs) can be prepared by ring-opening polymerization (ROP) of mixtures of two different enantiomerically pure 4-alkyl-ß-propiolactones. However, the approach could not be extended to PHAs with chemically tunable functional groups, which is highly desirable to access original advanced materials. Reported herein is the first highly syndioselective and controlled ROP of racemic allyl and benzyl ß-malolactonates (MLA(R); R=allyl, benzyl) using an yttrium complex supported by a tetradentate dichloro-substituted bis(phenolate) ligand. This highly active catalyst allows the nearly perfect alternating copolymerization of MLA(Allyl) and MLA(Benzyl). Hydrogenolysis of the benzyloxycarbonyl or functionalization of the allyl pendant groups opens a route towards a new class of functional alternating copolymers.

Chemistry that allows plastic recycling.

Enhancing thermal stability of polyhydroxyalkanoates for their closed-loop chemistry.

Discrete cationic zinc and magnesium complexes for dual organic/organometallic-catalyzed ring-opening polymerization of trimethylene carbonate.

We describe herein an original approach for the efficient immortal ring-opening polymerization (iROP) of trimethylene carbonate (TMC) under mild conditions using dual-catalyst systems combining a discrete cationic metal complex with a tertiary amine. A series of new zinc and magnesium cationic complexes of the type [{NNO}M](+) [anion](-) ({NNO}(-) = 2,4-di-tert-butyl-6-{[(2'-dimethylaminoethyl)methylamino]methyl}phenolate; M = Zn, [anion](-) = [B(C(6)F(5))(4)](-) (2), [H(2)N-{B(C(6)F(5))(3)}(2)](-) (3), and [EtB(C(6)F(5))(3)](-) (4); M = Mg, [anion](-) = [H(2)N{B(C(6)F(5))(3)}(2)](-) (7)) have been prepared from the corresponding neutral compounds [{NNO}ZnEt] (1) and [{NNO}-Mg(nBu)] (6). Compounds 2-4 and 7 exist as free ion pairs, as revealed by (1)H, (13)C, (19)F, and (11) B NMR spectroscopy in THF solution, and an X-ray crystallographic analysis of the bis(THF) adduct of compound 7, 7⋅(THF)(2). The neutral complexes 1 and 6, in combination with one equivalent or an excess of benzyl alcohol (BnOH), initiate the rapid iROP of TMC, in bulk or in toluene solution, at 45-60 °C (turnover frequency, TOF, up to 25-30,000 mol(TMC)⋅mol(Zn)⋅h(-1) for 1 and 220-240,000 mol(TMC)⋅mol(Mg)⋅h(-1) for 6), to afford H-PTMC-OBn with controlled macromolecular features. ROP reactions mediated by the cationic systems 2/BnOH and 7/BnOH proceeded much more slowly (TOF up to 500 and 3000 mol(TMC)⋅mol(Zn or Mg)⋅h(-1) at 110 °C) than those based on the parent neutral compounds 1/BnOH and 6/BnOH, respectively. Use of original dual organic/organometallic catalyst systems, obtained by adding 0.2-5 equiv of a tertiary amine such as NEt(3) to zinc cationic complexes [{NNO}Zn](+) [anion](-) (2-4), promoted high activities (TOF up to 18,300 mol(TMC)⋅mol(Zn)⋅h(-1) at 45 °C) giving H-PTMC-OBn with good control over the M(n) and M(w)/M(n) values. Variation of the nature of the anion in 2-4 did not significantly affect the performance of these catalyst systems. On the other hand, the dual magnesium-based catalyst system 7/NEt(3) proved to be poorly effective.

Controlled ROP of ß-butyrolactone simply mediated by amidine, guanidine, and phosphazene organocatalysts.

Basic organocatalysts of the guanidine (1,5,7-triazabicyclo[4.4.0]dec-5-ene, TBD), amidine (1,8-diazabicyclo[5.4.0]-undec-7-ene, DBU), and phosphazene (2-tert-butylimino-2-diethylamino-1,3-dimethylperhydro-1,3,2diazaphosphorine, BEMP) type do effectively polymerize ß-butyrolactone (BL). Poly(3-hydroxybutyrate)s (PHBs) with controlled molecular features, that is, controlled molar masses, narrow molar mass distributions, and well-defined functional end groups are thus formed at 60 °C from bulk monomer, with M(n,NMR) up to 21 500 g mol(-1). The formation of α,ω-guanidine/amidine/phosphazene,crotonate functionalized PHBs, as demonstrated by NMR, SEC, and MALDI-ToF mass spectrometry analyses, mechanistically suggests the formation of N-acyl-α,ß-unsaturated propagating species that originate from 1:1 guanidine/amidine/phosphazene:BL adducts.

Polythioesters Prepared by Ring-Opening Polymerization of Cyclic Thioesters and Related Monomers.

Polyhydroxyalkanoates (PHAs) are biodegradable and biocompatible polyesters with a wide range of applications; in particular, they currently stand as promising alternatives to conventional polyolefin-based "plastics". The introduction of sulfur atoms within the PHAs backbone can endow the resulting polythioesters (PTEs) with differentiated, sometimes enhanced thermal, optical and mechanical properties, thereby widening their versatility and use. Hence, PTEs have been gaining increasing attention over the past half-decade. This review highlights recent advances towards the synthesis of well-defined PTEs by ring-opening polymerization (ROP) of cyclic thioesters - namely thiolactones - as well as of S-carboxyanhydrides and thionolactones; it also covers the ring-opening copolymerization (ROCOP) of cyclic thioanhydrides or thiolactones with epoxides or episulfides. Most of the ROP reactions described are of anionic type, mediated by inorganic, organic or organometallic initiators/catalysts, along with a few enzymatic reactions as well. Emphasis is placed on the reactivity of the thio monomers, in relation to their ring-size ranging from 4- to 5-, 6- and 7-membered cycles, the nature of the catalyst/initiating systems implemented and their efficiency in terms of activity and control over the PTE molar mass, dispersity, topology, and microstructure.

Organocatalysts for the controlled "immortal" ring-opening polymerization of six-membered-ring cyclic carbonates: a metal-free, green process.

Six-membered cyclic carbonates, namely trimethylene carbonate (TMC), 3,3-dimethoxytrimethylene carbonate (DMTMC) and 3-benzyloxytrimethylene carbonate (BTMC), undergo controlled "immortal" ring-opening polymerization (iROP) under mild conditions (bulk, 60-150 °C), by using organocatalysts, including an amine [4-N,N-dimethylaminopyridine (DMAP)], a guanidine [1,5,7-triazabicyclo-[4.4.0]dec-5-ene (TBD)], or a phosphazene [2-tert-butylimino-2-diethylamino-1,3-dimethylperhydro-1,3,2-diazaphosphorine (BEMP)], in the presence of an alcohol [benzyl alcohol (BnOH), 1,3-propanediol (PPD), glycerol (GLY)] that acts as both a co-initiator and a chain-transfer agent. Remarkably, such organocatalysts remain highly active in the iROP of technical-grade, unpurified TMC. Under optimized conditions, as much as 100,000 equivalents of TMC were fully converted by as little as 10 ppm of BEMP with the simultaneous growth of as many as 200 polymer chains, allowing the preparation of high molar mass poly(trimethylene carbonate)s (up to 45,800 g mol(-1)). These catalyst systems enable among the highest activities (TOF=55,800 h(-1)) and productivities (TON=95,000) ever reported for the ROP of TMC.

Bis(phosphinimino)methanide borohydride complexes of the rare-earth elements as initiators for the ring-opening polymerization of ε-caprolactone: combined experimental and computational investigations.

Rare-earth-metal borohydrides are known to be efficient catalysts for the polymerization of apolar and polar monomers. The bis-borohydrides [{CH(PPh2 NSiMe3)2}La(BH4)2(THF)] and [{CH(PPh2NSiMe3)2}Ln(BH4)2] (Ln = Y, Lu) have been synthesized by two different synthetic routes. The lanthanum and the lutetium complexes were prepared from [Ln(BH4)3(THF)3] and K{CH(PPh2NSiMe3)2}, whereas the yttrium analogue was obtained from in situ prepared [{CH(PPh2NSiMe3)2}YCl2]2 and NaBH4. All new compounds were characterized by standard analytical/spectroscopic techniques, and the solid-state structures were established by single-crystal X-ray diffraction. The ring-opening polymerization (ROP) of ε-caprolactone initiated by [{CH(PPh2NSiMe3)2}La(BH4)2(THF)] and [{CH(PPh2NSiMe3)2}Ln(BH4)2] (Ln = Y, Lu) was studied. At 0 °C the molar mass distributions determined were the narrowest values (M(w)/M(n) = 1.06-1.11) ever obtained for the ROP of ε-caprolactone initiated by rare-earth-metal borohydride species. DFT investigations of the reaction mechanism indicate that this type of complex reacts in an unprecedented manner with the first B-H activation being achieved within two steps. This particularity has been attributed to the metallic fragment based on the natural bond order analysis.

Highly Effective and Green Catalytic Approach Toward α,ω-Dihydroxy-Telechelic Poly(trimethylenecarbonate).

α,ω-Dihydroxy-telechelic poly(trimethylenecarbonate), HO-PTMC-OH, is synthesized from the controlled "immortal" ring-opening polymerization (ROP) of trimethylene carbonate under mild conditions (bulk, 60 °C), using ZnEt(2) or, more efficiently, [(BDI)Zn(N(SiMe(3) )(2) )] (BDI = CH(CMeNC(6) H(3) -2,6-iPr(2) )(2) ) as catalyst precursor, in the presence of a diol HO-R-OH (R = (CH(2) )(2) or CH(2) C(6) H(4) CH(2) ; 0.5-10 equiv. vs Zn) acting both as co-initiator and chain transfer agent. Alternatively, HO-PTMC-OH is prepared upon hydrogenolysis of HO-PTMC-OCH(2) Ph, initially prepared from the ROP of TMC using the [(BDI)Zn(N(SiMe(3) )(2) )]/PhCH(2) OH system, under smooth operating conditions using Pd/charcoal. Well-defined dihydroxy-functionalized PTMCs of molar mass ranging from $\overline M _{\rm n}$ = 2 000 to 109 500 g · mol(-1) were thus quantitatively obtained and fully characterized by NMR, MALDI-TOF-MS and SEC analyses. The versatility of this "immortal" ROP allows the preparation of alike α,ω-functional polyester such as linear HO-poly(lactide)-OH, as well as star polymers such as the glycerol-based PTM-OH(3) .

Biodegradable polycarbonate-b-polypeptide and polyester-b-polypeptide block copolymers: synthesis and nanoparticle formation towards biomaterials.

The amino poly(trimethylene carbonate)-NHt-Boc (PTMC-NHt-Boc) and poly(epsilon-caprolactone)-NH -Boc (PCL-NHt-Boc) were synthesized by ring-opening polymerization (ROP) of TMC or CL and subsequently deprotected into the corresponding PTMC-NH2 and PCL-NH2. These functional homopolymers were used as macroinitiators for the ROP of gamma-benzyl-L-glutamate N-carboxyanhydride (BLG), consequently, giving the respective diblock copolymers PTMC-b-PBLG and PCL-b-PBLG in almost quantitative yields. The (co)polymers have been characterized by NMR and SEC analyses. DSC and IR studies confirmed the block structure of the copolymers and highlighted a phase separation between the rigid peptide (alpha-helix conformation) and the more flexible polyester segments. The self-assembly and the degradation behaviors of the copolymers depended on the nature of the polyester block and on the copolymer composition. Nanoparticles obtained from PBLG block copolymers were twice smaller ( RH < 100 nm) than those formed from PTMC and PCL homopolymers. Finally, their enzymatic degradation revealed that PTMC nanoparticles degraded faster than those made of PCL.

Evaluation of Band-Selective HSQC and HMBC: Methodological Validation on the Cyclosporin Cyclic Peptide and Application for Poly(3-hydroxyalkanoate)s Stereoregularity Determination.

Band-selective (bs) HSQC, improving spectral resolution by restriction of the heteronuclear dimension without inducing spectral folding, has been recently used for polymer tacticity determination. Herein is reported an evaluation of various bs-HSQC and bs-HMBC sequences, first from a methodological point of view (selectivity, dependence to INEPT interpulse delay or relaxation delay), using the cyclic peptide cyclosporin selected as a model compound, and then from an applicative approach, comparing tacticity determined from bs-HSQC and bs-HMBC experiments to the one obtained from 1D 13C{¹H} on poly(3-hydroxyalkanoate)s samples. For HSQC sequences, the 13C selectivity scheme consisting in substituting a 13C broadband refocalization by a selective one revealed itself problematic, with unwanted aliased signals, whereas the insertion of double pulsed field gradients spin-echo (DPFGSE) or the use of opposite sign gradients bracketing a selective refocalization gave satisfactory results. Determination of the probability of syndiotactic enchainments, Ps, by bs-HSQC is fully consistent and no precision loss was observed when decreasing acquisition time (37 min vs. 106 min for 1D 13C{¹H}). Bs-HMBC, although not straightforwardly applicable for tacticity determination, could provide (after a calibration step) an alternative for compounds of which only 13C carbonyl signals are resolved enough for discriminating between syndiotactic and isotactic configurations.