Redox-Responsive Gold Nanoparticles Coated with Hyaluronic Acid and Folic Acid for Application in Targeting Anticancer Therapy.

Methotrexate (MTX) has poor water solubility and low bioavailability, and cancer cells can become resistant to it, which limits its safe delivery to tumor sites and reduces its clinical efficacy. Herein, we developed novel redox-responsive hybrid nanoparticles (NPs) from hyaluronic acid (HA) and 3-mercaptopropionic acid (MPA)-coated gold NPs (gold@MPA NPs), which were further conjugated with folic acid (FA). The design of FA-HA-ss-gold NPs aimed at enhancing cellular uptake specifically in cancer cells using an active FA/HA dual targeting strategy for enhanced tumor eradication. MTX was successfully encapsulated into FA-HA-ss-gold NPs, with drug encapsulation efficiency (EE) as high as >98.7%. The physicochemical properties of the NPs were investigated in terms of size, surface charges, wavelength reflectance, and chemical bonds. MTX was released in a sustained manner in glutathione (GSH). The cellular uptake experiments showed effective uptake of FA-HA-ss-gold over HA-ss-gold NPs in the deep tumor. Moreover, the release studies provided strong evidence that FA-HA-ss-gold NPs serve as GSH-responsive carriers. In vitro, anti-tumor activity tests showed that FA-HA-ss-gold/MTX NPs exhibited significantly higher cytotoxic activity against both human cervical cancer (HeLa) cells and breast cancer (BT-20) cells compared to gold only and HA-ss-gold/MTX NPs while being safe for human embryonic kidney (HEK-293) cells. Therefore, this present study suggests that FA-HA-ss-gold NPs are promising active targeting hybrid nanocarriers that are stable, controllable, biocompatible, biodegradable, and with enhanced cancer cell targetability for the safe delivery of hydrophobic anticancer drugs.

DeepRefiner: high-accuracy protein structure refinement by deep network calibration.

The DeepRefiner webserver, freely available at http://watson.cse.eng.auburn.edu/DeepRefiner/, is an interactive and fully configurable online system for high-accuracy protein structure refinement. Fuelled by deep learning, DeepRefiner offers the ability to leverage cutting-edge deep neural network architectures which can be calibrated for on-demand selection of adventurous or conservative refinement modes targeted at degree or consistency of refinement. The method has been extensively tested in the Critical Assessment of Techniques for Protein Structure Prediction (CASP) experiments under the group name 'Bhattacharya-Server' and was officially ranked as the No. 2 refinement server in CASP13 (second only to 'Seok-server' and outperforming all other refinement servers) and No. 2 refinement server in CASP14 (second only to 'FEIG-S' and outperforming all other refinement servers including 'Seok-server'). The DeepRefiner web interface offers a number of convenient features, including (i) fully customizable refinement job submission and validation; (ii) automated job status update, tracking, and notifications; (ii) interactive and interpretable web-based results retrieval with quantitative and visual analysis and (iv) extensive help information on job submission and results interpretation via web-based tutorial and help tooltips.

Bioactive Natural Products Identification Using Automation of Molecular Networking Software.

Secondary metabolites from natural sources are promising starting points for discovering and developing drug prototypes and new drugs, as many current treatments for numerous diseases are directly or indirectly related to such compounds. Recent advances in bioinformatics tools and molecular networking methods have made it possible to identify novel bioactive compounds. In this study, a workflow combining network-based methods for identifying bioactive compounds found in natural products was streamlined by innovating an automated bioinformatics software. The workflow relies on Global Natural Product Social Molecular Networking (GNPS), a web-based mass spectrometry ecosystem that aims to be an open-access knowledge base for community-wide organization and sharing of raw, processed, or annotated fragmentation mass spectrometry data. By combining computational tools including MZmine2, GNPS, and Cytoscape, the integrated dashboard quickly creates bioactive molecular networks with minimal user intervention and reduces the processing time of the original workflow by over 80%. This newly automated workflow quickens the process of discovering bioactive compounds from natural products. This study uses extracts from Psidium guajava leaves to demonstrate the application of our automated software.

Thermoresponsive- co-Biodegradable Linear-Dendritic Nanoparticles for Sustained Release of Nerve Growth Factor To Promote Neurite Outgrowth.

Thermoresponsive and biodegradable linear-dendritic nanoparticles containing poly( N-isopropylacrylamide), poly(l-lactic acid), and poly(l-lysine) dendrons were investigated for sustained release of nerve growth factor (NGF) in response to temperature change. The nanoparticles and their degradants were not cytotoxic to neuron-like PC12 cells for at least one month. The nanoparticles were preferentially taken up by PC12 cells 6-13-times more at temperatures above (37 °C) than below (25 °C) the lower critical solution temperature of the nanoparticles. NGF could be loaded into the nanoparticles in aqueous solution and slowly released from the nanoparticles for 12 and 33 days at 25 and 37 °C, respectively. The released NGF was biologically active by promoting neurite outgrowth of PC12 cells. This work demonstrates a new concept of using thermoresponsive and biodegradable linear-dendritic nanoparticles for thermally targeted and sustained release of NGF and other protein drugs for the treatment of Alzheimer's disease and other neurological disorders.

NIR-degradable and biocompatible hydrogels derived from hyaluronic acid and coumarin for drug delivery and bio-imaging.

In this work, bioorthogonal and photodegradable hydrogels derived from norbornene (Nb) functionalized hyaluronic acid and a water soluble coumarin-based cross-linker possessing terminal tetrazine (Tz) groups, were developed for NIR-responsive release of doxorubicin (DOX). The inverse electron demand Diels-Alder cross-linking reaction between Nb and Tz functionalities formed the hydrogels at physiological conditions, whereas N2 gas liberated during the reaction created pores in the hydrogels. The gelation time ranges (about 5-20 min) and the viscoelastic behavior (G' ~ 346-1380 Pa) demonstrated that the resulting hydrogels were injectable and possessed tunable mechanical properties. Moreover, hydrogels released the encapsulated DOX upon NIR irradiation, owing to the NIR-responsive cleavage of coumarin-ester, and consequently, induced anti-tumor activity in BT-20 cancer cells. Additionally, the hydrogels could be excited at various wavelengths of the visible spectrum and can emit green to red fluorescence, demonstrating their simultaneous photo-responsive drug release and bio-imaging applications.

The effect of molecular weight and chemical structure of cross-linkers on the properties of redox-responsive hyaluronic acid hydrogels.

In this work, we investigated the effect of the size and the chemical structure of crosslinkers on the properties of hyaluronic acid-based hydrogels prepared via an inverse electron demand Diels-Alder reaction. Hydrogels having loose and dense networks were designed by cross-linkers with and without polyethylene glycol (PEG) spacers of different molecular weights (1000 and 4000 g/mol). The study showed that the properties of hydrogels such as swelling ratios (20-55 times), morphology, stability, mechanical strength (storage modulus in the range 175-858 Pa), and drug loading efficiency (87 % ~ 90 %) were greatly influenced by the addition of PEG and changing its molecular weight in the cross-linker. Particularly, the presence of PEG chains in redox- responsive crosslinkers increased the doxorubicin release (85 %, after 168 h) and the degradation rate (96 %, after 10 d) of hydrogels in the simulated reducing medium (10 mM DTT). The in vitro cytotoxicity experiments conducted for HEK-293 cells revealed that the formulated hydrogels were biocompatible, which could be a promising candidate for drug delivery applications.

Anticancer drug-loaded gliadin nanoparticles induce apoptosis in breast cancer cells.

Nanoscale drug carriers play an important role in regulating the delivery, permeability, and retention of the drugs. Although various carriers have been used to encapsulate anticancer drugs, natural biomaterials are of great benefit for delivery and controlled release of drugs. We used the electrospray deposition system to synthesize gliadin and gliadin-gelatin composite nanoparticles for delivery and controlled release of an anticancer drug (e.g., cyclophosphamide). The size profile and synthesis of nanoparticles was characterized by dynamic light scattering and X-ray diffractometry. Cyclophosphamide was gradually released from the gliadin nanoparticles for 48 h. In contrast, the gliadin-gelatin composite nanoparticles released cyclophosphamide in a rapid manner. Furthermore, we demonstrated that breast cancer cells cultured with cyclophosphamide-loaded 7% gliadin nanoparticles for 24 h became apoptotic, confirmed by Western blotting analysis. Therefore, the gliadin-based nanoparticle could be a powerful tool for delivery and controlled release of anticancer drugs.

Injectable and biocompatible alginate-derived porous hydrogels cross-linked by IEDDA click chemistry for reduction-responsive drug release application.

In this work, novel injectable and reduction-responsive hydrogels were successfully prepared via inverse electron demand Diels-Alder reaction between alginate-norbornene and a water-soluble PEG based disulfide cross-linker. The reduction-responsive cross-linker was designed to contain a PEG chain within two disulfide linkages, and two terminal tetrazine groups. The resulting hydrogels possessed high swelling ratios, porous morphology, excellent drug loading efficiency (~92%), and suitable mechanical properties. The drug release experiments demonstrated that the hydrogels released more than 90% of the encapsulated doxorubicin (DOX) in the presence of 10 mM glutathione while a minimal DOX release (<25%) was measured in physiological buffer (PBS, pH = 7.4) after 11 d. The cross-linker and hydrogels did not exhibit any apparent cytotoxicity to fibroblast cells. In contrast, DOX-loaded hydrogels induced anti-tumor activity against cancer cells. The injectable and reduction-responsive hydrogels hold great potential as a biomaterial for stimuli responsive drug delivery applications.

Multi-stimuli responsive hydrogels derived from hyaluronic acid for cancer therapy application.

One of the most promising strategies for the controlled release of therapeutic molecules is stimuli-responsive and biodegradable hydrogels developed from natural polymers. However, current strategies to development stimuli-responsive hydrogels lack precise control over drug release profile and use cytotoxic materials during preparation. To address these issues, multi-stimuli responsive hydrogels derived from hyaluronic acid and diselenide based cross-linker were developed for the controlled release of doxorubicin (DOX). Hydrogels were rapidly formed via an inverse electron demand Diels-Alder click chemistry and encapsulated DOX/indocyanine green (ICG) in their porous networks. The hydrogels showed a rapid release of DOX in acidic (pH 5), reducing (10 mmol DTT), and oxidizing medium (0.5% H2O2), and after NIR irradiation. The in vitro experiments demonstrated that hydrogels were highly cytocompatible and the DOX-loaded hydrogels induced similar anti-tumor effect as compared to that of the free-DOX. Furthermore, DOX + ICG loaded hydrogels increased the antitumor efficacy of DOX after NIR irradiation.

Fast Absorbent and Highly Bioorthogonal Hydrogels Developed by IEDDA Click Reaction for Drug Delivery Application.

In this work, we engineered highly biocompatible and fast absorbent injectable hydrogels derived from norbornene (Nb)-functionalized hyaluronic acid (HA-Nb) and a water-soluble cross-linker possessing tetrazine (Tz) functional groups on both ends of polyethylene glycol (PEG-DTz). The by-product (nitrogen gas) of the inverse electron demand Diels−Alder (IEDDA) cross-linking reaction carved porosity in the resulting hydrogels. By varying the molar ratio of HA-Nb and PEG-DTz (Nb:Tz = 10:10, 10:5, 10:2.5), we were able to formulate hydrogels with tunable porosity, gelation time, mechanical strength, and swelling ratios. The hydrogels formed quickly (gelation time < 100 s), offering a possibility to use them as an injectable drug delivery system. The experimental data showed rapid swelling and a high swelling ratio thanks to the existence of PEG chains and highly porous architectures of the hydrogels. The hydrogels were able to encapsulate a high amount of curcumin (~99%) and released the encapsulated curcumin in a temporal pattern. The PEG-DTz cross-linker, HA-Nb, and the resulting hydrogels showed no cytotoxicity in HEK-293 cells. These fast absorbent hydrogels with excellent biocompatibility fabricated from HA-Nb and the IEDDA click-able cross-linker could be promising drug carriers for injectable drug delivery applications.

Reduction-responsive and bioorthogonal carboxymethyl cellulose based soft hydrogels cross-linked via IEDDA click chemistry for cancer therapy application.

In this work, novel biocompatible and reduction-responsive soft hydrogels were formulated from norbornene (Nb)-functionalized carboxymethyl cellulose (CMCNb). To cross-link the CMC-Nb via a highly bioorthogonal inverse electron demand Diels-Alder (IEDDA) reaction, we employed a water-soluble and reduction-responsive diselenide-based cross-linker possessing two terminal tetrazine (Tz) groups with varying molar concentrations (Nb/Tz molar ratios of 10/10, 10/05, and 10/2.5). The N2 microbubbles liberated as a by-product during the IEDDA reaction generated in-situ pores in hydrogel networks. The resulting hydrogels had highly porous structures and relatively soft mechanical properties (storage moduli in the range 74 ⁓160 Pa). The hydrogels showed high swelling ratios (>35 times), tunable gelation times (1-5 min), and excellent doxorubicin (DOX) loading efficiencies (>85 %). The hydrogels exhibited stimuli-responsive and fast release of DOX (99 %, after 12 h) in the presence of 10 mmol of glutathione as compared to the normal PBS solution (38 %). The cytotoxic effects of blank hydrogels were not observed against HEK-239 cells, while the DOX-encapsulated hydrogels exhibited anti-tumor activity in BT-20 cancer cells. The results indicate potential applications of the CMC-based soft hydrogels in injectable drug delivery systems.

Highly porous core-shell polymeric fiber network.

Core-shell nanofibers are of great interest in the field of tissue engineering and cell biology. We fabricated porous core-shell fiber networks using an electrospinning system with a water-immersed collector. We hypothesized that the phase separation and solvent evaporation process would enable the control of the pore formation on the core-shell fiber networks. To synthesize porous core-shell fiber networks, we used polycaprolactone (PCL) and gelatin. Quantitative analysis showed that the sizes of gelatin-PCL core-shell nanofibers increased with PCL concentrations. We also observed that the shapes of the pores created on the PCL fiber networks were elongated, whereas the gelatin-PCL core-shell fiber networks had circular pores. The surface areas of porous nanofibers were larger than those of the nonporous nanofibers due to the highly volatile solvent and phase separation process. The porous core-shell fiber network was also used as a matrix to culture various cell types, such as embryonic stem cells, breast cancer cells, and fibroblast cells. Therefore, this porous core-shell polymeric fiber network could be a potentially powerful tool for tissue engineering and biological applications.

Synthesis of micellar-like terpolymer nanoparticles with reductively-cleavable cross-links and evaluation of efficacy in 2D and 3D models of triple negative breast cancer.

Triple negative or basal-like breast cancer (TNBC) is characterised by aggressive progression, lack of standard therapies and poorer overall survival rates for patients. The bad prognosis, high rate of relapse and resistance against anticancer drugs have been associated with a highly abnormal loss of redox control in TNBC cells. Here, we developed docetaxel (DTX)-loaded micellar-like nanoparticles (MLNPs), designed to address the aberrant TNBC biology through the placement of redox responsive cross-links designed into a terpolymer. The MLNPs were derived from poly(ethyleneglycol)-b-poly(lactide)-co-poly(N3-α-ε-caprolactone) with a disulfide linker pendant from the caprolactone regions in order to cross-link adjacent chains. The terpolymer contained both polylactide and polycaprolactone to provide a balance of accessibility to reductive agents necessary to ensure stability in transit, but rapid micellar breakdown and concomitant drug release, when in breast cancer cells with increased levels of reducing agents. The empty MLNPs did not show any cytotoxicity in vitro in 2D monolayers of MDA-MB-231 (triple negative breast cancer), MCF7 (breast cancer) and MCF10A (normal breast epithelial cell line), whereas DTX-loaded reducible crosslinked MLNPs exhibited higher cytotoxicity against TNBC and breast cancer cells which present high intracellular levels of glutathione. Crosslinked and non-crosslinked MLNPs showed high and concentration-dependent cellular uptake in monolayers and tumour spheroids, including when assessed in co-cultures of TNBC cells and cancer-associated fibroblasts. DTX loaded crosslinked MLNPs showed the highest efficacy against 3D spheroids of TNBC, in addition the MLNPs also induced higher levels of apoptosis, as assessed by annexin V/PI assays and increased caspase 3/7 activity in MDA-MB-231 cells in comparison to cells treated with DTX-loaded un-crosslinked MLNP (used as a control) and free DTX. Taken together these data demonstrate that the terpolymer micellar-like nanoparticles with reducible crosslinks have high efficacy in both 2D and 3D in vitro cancer models by targeting the aberrant biology, i.e. loss of redox control of this type of tumour, thus may be promising and effective carrier systems for future clinical applications in TNBC.

Design strategies for chemical-stimuli-responsive programmable nanotherapeutics.

Chemical-stimuli-responsive nanotherapeutics have gained great interest in drug delivery and diagnosis applications. These nanotherapeutics are designed to respond to specific internal stimuli including pH, ionic strength, redox, reactive oxygen species, glucose, enzymes, ATP and hypoxia for site-specific and responsive or triggered release of payloads and/or biomarker detections. This review systematically and comprehensively addresses up-to-date technological and design strategies, and challenges nanomaterials to be used for triggered release and sensing in response to chemical stimuli.

Design strategies for physical-stimuli-responsive programmable nanotherapeutics.

Nanomaterials that respond to externally applied physical stimuli such as temperature, light, ultrasound, magnetic field and electric field have shown great potential for controlled and targeted delivery of therapeutic agents. However, the body of literature on programming these stimuli-responsive nanomaterials to attain the desired level of pharmacologic responses is still fragmented and has not been systematically reviewed. The purpose of this review is to summarize and synthesize the literature on various design strategies for simple and sophisticated programmable physical-stimuli-responsive nanotherapeutics.

Bioreducible cross-linked core polymer micelles enhance in vitro activity of methotrexate in breast cancer cells.

Polymer micelles have emerged as promising carriers for controlled release applications, however, several limitations of micelle-based drug delivery have also been reported. To address these issues, we have synthesized a functional biodegradable and cytocompatible block copolymer based on methoxypoly(ethyleneglycol)-b-poly(ε-caprolactone-co-α-azido-ε-caprolactone) (mPEG-b-poly(εCL-co-αN3εCL)) as a precursor of reduction sensitive core-crosslinked micelles. The synthesized polymer was formulated as micelles using a dialysis method and loaded with the anti-inflammatory and anti-cancer drug methotrexate (MTX). The micellar cores were subsequently crosslinked at their pendent azides by a redox-responsive bis(alkyne). The size distributions and morphology of the polymer micelles were assessed using dynamic light scattering (DLS) and transmission electron microscopy, and drug release assays were performed under simplified (serum free) physiological and reductive conditions. Cellular uptake studies in human breast cancer cells were performed using Oregon-green loaded core-crosslinked micelles. The MTX-loaded core-crosslinked micelles were assessed for their effects on metabolic activity in human breast cancer (MCF-7) cells by evaluating the reduction of the dye MTT 3-(4,5-dimethylthiazol-2-yl)-2,5-diphenyltetrazolium bromide. The apoptosis inducing potential of MTX-loaded core-crosslinked micelles was analysed using Hoechst/propidium iodide (PI) and annexin-V/PI assays. The data from these experiments indicated that drug release from these cross-linked micelles can be controlled and that the redox-responsive micelles are more effective carriers for MTX than non-crosslinked analogues and the free drug in the cell-lines tested.

Two-phase bioreactor system for cell-laden hydrogel assembly.

Bottom-up approach is a potentially useful tool for hydrogel assembly of cell-laden individual building blocks. In this article, we assembled individual building blocks of photocrosslinkable microgels in a rapid and controlled manner. Individual building blocks of poly(ethylene glycol) (PEG) microgels with square and hexagonal shapes were fabricated by using a photolithography technique. Individual building blocks of PEG microgels were assembled on a hydrophobic mineral oil phase in a bioreactor with a magnetic stirrer. The hydrophobic mineral oil minimized the surface free energy to assemble hydrophilic PEG microgels on a two-phase oil-aqueous solution interface. We used the hydrophobic effect as a driving force for the hydrogel assembly. Various types of the hydrogel assembly were generated by controlling the stirring rate. As stirring speed increased, the percentage of linear, branched, and closely packed hydrogel assembly was increased. However, the percentage of random assembly was reduced by increasing stirring rate. The stirring time also played an important role in controlling the types of hydrogel assembly. The percentage of linear, branched, and closely packed hydrogel assembly was improved by increasing stirring time. Therefore, we performed directed cell-laden hydrogel assembly using a two-phase bioreactor system and optimized the stirring rate and time to regulate the desired types of hydrogel assembly. Furthermore, we analyzed cell viability of hydrogel linear assembly with square shapes, showing highly viable even after secondary photocrosslinking reaction. This bioreactor system-based hydrogel assembly could be a potentially powerful approach for creating tissue microarchitectures in a three-dimensional manner.