Axin1 regulates tooth root development by inhibiting AKT1-mTORC1 activation and Shh translation in Hertwig's epithelial root sheath.

Hertwig's epithelial root sheath (HERS) interacts with dental apical mesenchyme and guides development of the tooth root, which is an integral part for the function of the whole tooth. However, the key genes in HERS essential for root development are understudied. Here we show that Axin1, a scaffold protein that negatively regulates canonical Wnt signaling, is strongly expressed in the HERS. Axin1 ablation in the HERS of mice leads to defective root development but in a manner independent of canonical Wnt signaling. Further studies reveal that Axin1 in the HERS negatively regulates the AKT1-mTORC1 pathway through binding to AKT1, leading to inhibition of ribosomal biogenesis and mRNA translation. Sonic hedgehog (Shh) protein, a morphogen essential for root development, is over synthesized by upregulated mTORC1 activity upon Axin1 inactivation. Importantly, either haploinsufficiency of mTORC1 subunit Raptor or pharmacologic inhibition of Shh signaling can rescue the root defects in Axin1 mutant mice. Collectively, our data suggest that, independent of canonical Wnt signaling, Axin1 controls ribosomal biogenesis and selective mRNA translation programs via AKT1-mTORC1 signaling during tooth root development.

Pembrolizumab plus vorinostat induces responses in patients with Hodgkin lymphoma refractory to prior PD-1 blockade.

This phase 1 study evaluated the addition of vorinostat to pembrolizumab in patients with relapsed/refractory (RR) classical Hodgkin lymphoma (cHL), diffuse large B-cell lymphoma, and follicular lymphoma. We report the results in cases of cHL. Adult patients with RR cHL who had received ≥1 prior lines of therapy and were ineligible for transplantation were treated in a dose-escalation cohort with 2 dose levels (DLs) and then on an expansion cohort at the recommended phase 2 dose (RP2D) in 21-day cycles. Vorinostat 100 mg twice a day (DL1) and 200 mg twice a day (DL2) was administered orally from days 1 to 5 and 8 to 12; all patients received pembrolizumab 200 mg IV every 3 weeks. The primary end point was safety and determination of RP2D. In total, 32 patients with cHL were enrolled, including 30 at DL2 (RP2D); 78% had received prior anti-programmed cell death 1 (anti-PD-1) therapy, and 56% were PD-1 refractory. Grade ≥3 adverse events (AEs) included hypertension (9%), neutropenia (9%), hypophosphatemia (9%), thrombocytopenia (6%), and lymphopenia (6%). Immune-related AEs included grade 1 or 2 thyroiditis (13%), grade 1 rash (6%), and grade 3 esophagitis/duodenitis (3%). The overall response rate (ORR) was 72% and complete response (CR) rate was 34%. Patients refractory to prior PD-1 blockade (n = 18) had ORR and CR rates of 56% and 11%, respectively. Pembrolizumab and vorinostat was well tolerated with a high ORR rate in RR cHL including in anti-PD-1-refractory disease. This trial was registered at www.clinicaltrials.gov as #NCT03150329.

High-Performance Aqueous Calcium Ion Batteries Enabled by Zn Metal Anodes with Stable Ion-Conducting Interphases.

Aqueous calcium ion batteries, promising for energy storage, are still challenged by very limited anode choices. Although a Zn metal anode is popular in aqueous batteries, interface instability due to incessant corrosion and severe Zn dendrites hinders its development. Here, an interphase layer with densely packed nanocrystals of Ca3(CO3)2(OH)2·1.5H2O and ZnF2, and amorphous organic species, is demonstrated for a Zn metal anode with 1 M calcium trifluoromethyl sulfonate aqueous electrolyte. The hybrid interface fully avoids direct Zn-H2O contact, maintains fast ion conductivity, and effectively prevents corrosion and dendrite growth. Therefore, the symmetric cell stably lasts for 1600 h at 0.5 mA cm-2 and 2.5 mAh cm-2, far superior to 150 h for the control cell. Furthermore, the device maintains 80% capacity retention after 700 cycles at 1 A g-1, outperforming 13% retention after 200 cycles for the control device. This work indicates that interface and interphase engineering is also crucial for aqueous batteries.

High-performance PCW-DFB laser diodes using offset quantum well epitaxial structures.

We demonstrated a high-performance partially corrugated waveguide distributed feedback (PCW-DFB) laser with high output power, low relative intensity noise (RIN) and narrow linewidth. By introducing offset quantum-well structure that provides enough threshold gain difference for single transverse mode operation, the laser can achieve single mode behavior with an 8-µm-wide ridge waveguide. The laser has been designed by the simulation model based on the coupled wave equations, and the fabricated PCW-DFB laser with the cavity length of 1.3 mm exhibited an output power higher than 190 mW. Stable single mode characteristics have been achieved with a side-mode suppression-ratio (SMSR) over 55 dB. The RIN was less than -160.5 dB/Hz at an injection current of 470 mA, and the linewidth reached 45 kHz.

Turn-key Kerr soliton generation and tunable microwave synthesizer in dual-mode Si3N4 microresonators.

This study investigates the thermal compensation mechanism in dual-mode Si3N4 microresonators that demonstrates the ease of generation of single-solitons with nearly octave-wide spectral bandwidth. The deterministic creation of soliton frequency combs is achieved by merely switching the wavelength of a tunable laser or a semiconductor diode laser in a single step. The pump frequency detuning range that can sustain the soliton state is 30 gigahertz (GHz), which is approximately 100 times the resonance linewidth. Interestingly, these dual-mode resonators also support the coexistence of primary combs and solitons, enabling their utilization as functional microwave synthesizers. Furthermore, these resonators readily facilitate the generation of diverse multi-solitons and soliton crystals. This work presents a simplified system to access high-performance and versatile Kerr solitons, with wide-ranging applications in optical metrology, microwave photonics, and LiDAR.

Plant community diversity alters the response of ecosystem multifunctionality to multiple global change factors.

Biodiversity is considered important to the mitigation of global change impacts on ecosystem multifunctionality in terrestrial ecosystems. However, potential mechanisms through which biodiversity maintains ecosystem multifunctionality under global change remain unclear. We grew 132 plant communities with two levels of plant diversity, crossed with treatments based on 10 global change factors (nitrogen deposition, soil salinity, drought, plant invasion, simulated grazing, oil pollution, plastics pollution, antibiotics pollution, heavy metal pollution, and pesticide pollution). All global change factors negatively impacted ecosystem multifunctionality, but negative impacts were stronger in high compared with low diversity plant communities. We explored potential mechanisms for this unexpected result, finding that the inhibition of selection effects (i.e., selection for plant species associated with high ecosystem functioning) contributed to sensitivity of ecosystem multifunctionality to global change. Specifically, global change factors decreased the abundance of novel functional plants (i.e., legumes) in high but not low diversity plant communities. The negative impacts of global change on ecosystem multifunctionality were also mediated by increased relative abundance of fungal plant pathogens (identified from metabarcoding of soil samples) and their negative relationship with the abundance of novel functional plants. Taken together, our experiment highlights the importance of protecting high diversity plant communities and legumes, and managing fungal pathogens, to the maintenance of ecosystem multifunctionality in the face of complex global change.

Health state utility values for children and adolescents with type 1 diabetes: A systematic review and meta-analysis.

BACKGROUND: Type 1 diabetes mellitus (T1DM) is one of the most burdensome chronic diseases in the world. Health utility values are an important tool for quantifying this disease burden and conducting cost-utility analyses. This review aimed to derive a reference set of health utility values for children and adolescents with T1DM. METHODS: We searched MEDLINE and Embase from inception to March 2023 for health utility values of T1DM children and adolescents (aged ≤18 years) measured using direct and indirect preference elicitation approaches. Utility estimates were pooled by meta-analyses with subgroup analyses to evaluate differences by populations and elicitation approaches. RESULTS: Six studies involving 1276 participants were included in this study. Meta-analysis showed the overall utility value of children and adolescents with T1DM was 0.91 (95% CI 0.89-0.93). The utility value of T1DM children and adolescents with complications was 0.90 (95% CI 0.88-0.92), which was lower than those without complications (0.96, 95% CI 0.95-0.97). The utility value of children (aged <13 years) was higher than adolescents (aged 13-18 years) (0.90 vs. 0.85). The utility value measured by the EQ-5D-3L (0.91) was higher than the HUI3 (0.89), the SF-6Dv1 (0.83), and the time trade-off (0.81). The parent proxy-reported was similar to the patient self-reported (0.91 vs. 0.91). CONCLUSIONS: This study developed a reference set of pooled utility estimates for children and adolescents with T1DM, which is helpful for understanding the overall health status of T1DM and conducting economic evaluations. Further studies are needed to explore the utilities of T1DM with different types of complications.

Mapping IWQOL-Lite onto EQ-5D-5L and SF-6Dv2 among overweight and obese population in China.

PURPOSE: To develop the mapping functions from the Impact of Weight on Quality of Life-Lite (IWQOL-Lite) scores onto the EQ-5D-5L and SF-6Dv2 utility values among the overweight and obese population in China. METHODS: A representative sample of the overweight and obese population in China stratified by age, sex, body mass index (BMI), and area of residence was collected by online survey and the sample was randomly divided into development (80%) and validation (20%) datasets. The conceptual overlap between the IWQOL-Lite and the EQ-5D-5L or SF-6Dv2 was evaluated by Spearman's correlation coefficients. Five models, including OLS, Tobit, CLAD, GLM, and PTM were explored to derive mapping functions using the development dataset. The model performance was assessed using MAE, RMSE, and the percentage of AE > 0.05 and AE > 0.1 in the validation dataset. RESULTS: A total of 1000 respondents (48% female; mean [SD] age: 51.7 [15.3]; mean [SD] BMI: 27.4 [2.8]) were included in this study. The mean IWQOL-Lite scores and the utility values of EQ-5D-5L and SF-6Dv2 were 78.5, 0.851, and 0.734, respectively. The best-performing models predicting EQ-5D-5L and SF-6Dv2 utilities both used IWQOL-Lite total score as a predictor in the CLAD model (MAE: 0.083 and 0.076 for the EQ-5D-5L and SF-6Dv2; RMSE: 0.125 and 0.103 for the EQ-5D-5L and SF-6Dv2; AE > 0.05: 20.5% and 27.5% for the EQ-5D-5L and SF-6Dv2; AE > 0.10: 9.5% and 15.0% for the EQ-5D-5L and SF-6Dv2). CONCLUSION: CLAD models with the IWQOL-Lite total score can be used to predict both the EQ-5D-5L and SF-6Dv2 utility values among overweight and obese population in China.

Intraspecific variation in tomato: Impact on production quality and cadmium phytoremediation efficiency in intercropping systems with hyperaccumulating plant.

Intercropping with hyperaccumulators can facilitate the safe utilization of cadmium-contaminated soil. However, the effectiveness of this approach is influenced by plant species and varieties, which necessitates research on optimal plant consortia. In this study, 8 tomato varieties (3 cherry tomatoes and 5 common large-fruit tomatoes) were intercropped with Sedum alfredii in a moderately Cd-contaminated vegetable field. The results showed that the Cd concentration in the fruits of common large-fruit tomato varieties under monoculture was 1.03-1.50 mg/kg, while that in the fruits of cherry tomato varieties was 0.67-0.71 mg/kg. After intercropping with S. alfredii, the fruit Cd concentrations of Hangza 501, Hangza 503, and Hangza 108 decreased by 16.42 %, 19.72 %, and 6.76 %, respectively, while those of the other varieties significantly increased, except for those of Hangza 8. In contrast, the shoot Cd concentration of cherry tomatoes was greater than that of large-fruit tomatoes under monoculture. Furthermore, a significant increase in the shoot Cd concentration was noted in the Hangza 501, Hangza 503 and Hangza 603 plants following intercropping. Additionally, intercropping with S. alfredii increased the concentration of soluble sugars in the fruits of Hangza 8, Hangza 501, Hangza 503 and Hangza 603 by 4.66 %, 17.91 %, 10.60 % and 17.88 %, respectively. Intercropping with tomatoes resulted in a decrease in both the biomass and Cd uptake of S. alfredii. Interestingly, the inhibitory effect on S. alfredii was less pronounced when intercropped with cherry tomatoes than when intercropped with large-fruit tomatoes. Among the intercropping treatments, S. alfredii exhibited the greatest total Cd accumulation (0.06 mg/plant) when intercropped with Hangza 503. In conclusion, the cherry tomato variety Hangza 503 was the most suitable for intercropping with S. alfredii and can be used safely for vegetable production and simultaneous phytoremediation of polluted soil. Our findings suggest that strategic selection of tomato varieties can optimize the effectiveness of "phytoextraction coupled with agro-safe production" technology for managing soil Cd concentrations.

Ultrasensitive, Fast-Responsive, Directional Airflow Sensing by Bioinspired Suspended Graphene Fibers.

The development of high-performance miniaturized and flexible airflow sensors is essential to meet the need of emerging applications. Graphene-based airflow sensors are hampered by the sluggish response and recovery speed and low sensitivity. Here we employ laser-induced graphene (LIG) with poststructural biomimicry for fabricating high-performance, flexible airflow sensors, including cotton-like porous LIG, caterpillar fluff-like vertical LIG fiber, and Lepidoptera scale-like suspended LIG fiber (SLIGF) structures. The structural engineering changes the deformation behavior of LIGs under stress, among which the synchronous propagation of the scale-like structure of SLIGF is the most conducive to airflow sensing. The SLIGF achieves the shortest average response time of 0.5 s, the highest sensitivity of 0.11 s/m, and a record-low detection threshold of 0.0023 m/s, benchmarked against the state-of-the-art airflow sensors. Furthermore, we showcase the SLIGF airflow sensors in weather forecasting, health, and communications applications. Our study will help develop next-generation waterflow, sound, and motion sensors.