RESUMO
AIMS: Inflammation plays essential role in development of plaque disruption and coronary stent-associated complications. This study aimed to examine whether intracoronary dual-modal optical coherence tomography (OCT)-near-infrared fluorescence (NIRF) structural-molecular imaging with indocyanine green (ICG) can estimate inflammation in swine coronary artery. METHODS AND RESULTS: After administration of clinically approved NIRF-enhancing ICG (2.0 mg/kg) or saline, rapid coronary imaging (20 mm/s pullback speed) using a fully integrated OCT-NIRF catheter was safely performed in 12 atheromatous Yucatan minipigs and in 7 drug-eluting stent (DES)-implanted Yorkshire pigs. Stronger NIRF activity was identified in OCT-proven high-risk plaque compared to normal or saline-injected controls (P = 0.0016), which was validated on ex vivo fluorescence reflectance imaging. In vivo plaque target-to-background ratio (pTBR) was much higher in inflamed lipid-rich plaque compared to fibrous plaque (P < 0.0001). In vivo and ex vivo peak pTBRs correlated significantly (P < 0.0022). In vitro cellular ICG uptake and histological validations corroborated the OCT-NIRF findings in vivo. Indocyanine green colocalization with macrophages and lipids of human plaques was confirmed with autopsy atheroma specimens. Two weeks after DES deployment, OCT-NIRF imaging detected strong NIRF signals along stent struts, which was significantly higher than baseline (P = 0.0156). Histologically, NIRF signals in peri-strut tissue co-localized well with macrophages. CONCLUSION: The OCT-NIRF imaging with a clinical dose of ICG was feasible to accurately assess plaque inflammation and DES-related inflammation in a beating coronary artery. This highly translatable dual-modal molecular-structural imaging strategy could be relevant for clinical intracoronary estimation of high-risk plaques and DES biology.
Assuntos
Stents , Animais , Doença da Artéria Coronariana , Vasos Coronários , Stents Farmacológicos , Humanos , Verde de Indocianina , Inflamação , Imagem Molecular , Suínos , Tomografia de Coerência ÓpticaRESUMO
Fluorescence lifetime imaging microscopy (FLIM) is a powerful technique to visualize photophysical characteristics of biological targets. However, conventional FLIM methods have some limitations that restrict obtaining high-precision images in real time. Here, we propose a high-speed time-resolved laser-scanning microscopy by incorporating a novel line-to-pixel referencing method into the previously suggested analog mean-delay (AMD) method. The AMD method dramatically enhances the photon accumulation speed for achieving the certain precision compared to the time-correlated single-photon counting (TCSPC) method while maintaining high photon efficiency. However, its imaging pixel rate can still be restricted by the rearm time of the digitizer when it is triggered by laser pulses. With our line-to-pixel referencing method, the pulse train repeats faster than the trigger rearm time can be utilized by generating a line trigger, which is phase-locked with only the first pulse in each horizontal line composing an image. Our proposed method has been tested with a pulsed laser with 40 MHz repetition rate and a commercial digitizer with a 500 ns trigger rearm time, and a frame rate of 3.73 fps with a pixel rate of 3.91 MHz was accomplished while maintaining the measurement precision under 20 ps.
RESUMO
We propose a new method for high-speed, three-dimensional (3-D) fluorescence imaging, which we refer to as dual-detection confocal fluorescence microscopy (DDCFM). In contrast to conventional beam-scanning confocal fluorescence microscopy, where the focal spot must be scanned either optically or mechanically over a sample volume to reconstruct a 3-D image, DDCFM can obtain the depth of a fluorescent emitter without depth scanning. DDCFM comprises two photodetectors, each with a pinhole of different size, in the confocal detection system. Axial information on fluorescent emitters can be measured by the axial response curve through the ratio of intensity signals. DDCFM can rapidly acquire a 3-D fluorescent image from a single two-dimensional scan with less phototoxicity and photobleaching than confocal fluorescence microscopy because no mechanical depth scans are needed. We demonstrated the feasibility of the proposed method by phantom studies.
Assuntos
Aumento da Imagem/instrumentação , Imageamento Tridimensional/instrumentação , Lentes , Microscopia Confocal/instrumentação , Microscopia Confocal/métodos , Microscopia de Fluorescência por Excitação Multifotônica/instrumentação , Imagem Molecular/instrumentação , Desenho Assistido por Computador , Desenho de Equipamento , Análise de Falha de Equipamento , Aumento da Imagem/métodos , Imageamento Tridimensional/métodos , Microscopia de Fluorescência por Excitação Multifotônica/métodos , Imagem Molecular/métodos , Reprodutibilidade dos Testes , Sensibilidade e EspecificidadeRESUMO
This paper describes the design and control of a nanoprecision XY Theta scanner consisting of voice coil motors and air bearing guides. The proposed scanner can be installed on a conventional XY stage with long strokes to improve the positioning accuracy and settling performance. Major design considerations in developing a high precision scanner are sensor accuracy, actuator properties, structural stability, guide friction, and thermal expansion. Considering these factors, the proposed scanner is made of invar, which has a small thermal expansion coefficient and good structural stiffness. Four voice coil motors drive the scanner, which is suspended by four air bearing pads, in the x, y, and theta directions. The scanner's position is measured by three laser interferometers which decouple the scanner from the conventional stage. The mirror blocks reflecting the laser beams are fixed using viscoelastic sheets, ensuring that the scanner has a well-damped structural mode. A time delay control algorithm is implemented on the real-time controller to control the scanner. The effectiveness of the proposed scanner is verified experimentally.
RESUMO
Rationale: Atherosclerotic plaque is a chronic inflammatory disorder involving lipid accumulation within arterial walls. In particular, macrophages mediate plaque progression and rupture. While PPARγ agonist is known to have favorable pleiotropic effects on atherogenesis, its clinical application has been very limited due to undesirable systemic effects. We hypothesized that the specific delivery of a PPARγ agonist to inflamed plaques could reduce plaque burden and inflammation without systemic adverse effects. Methods: Herein, we newly developed a macrophage mannose receptor (MMR)-targeted biocompatible nanocarrier loaded with lobeglitazone (MMR-Lobe), which is able to specifically activate PPARγ pathways within inflamed high-risk plaques, and investigated its anti-atherogenic and anti-inflammatory effects both in in vitro and in vivo experiments. Results: MMR-Lobe had a high affinity to macrophage foam cells, and it could efficiently promote cholesterol efflux via LXRα-, ABCA1, and ABCG1 dependent pathways, and inhibit plaque protease expression. Using in vivo serial optical imaging of carotid artery, MMR-Lobe markedly reduced both plaque burden and inflammation in atherogenic mice without undesirable systemic effects. Comprehensive analysis of en face aorta by ex vivo imaging and immunostaining well corroborated the in vivo findings. Conclusion: MMR-Lobe was able to activate PPARγ pathways within high-risk plaques and effectively reduce both plaque burden and inflammation. This novel targetable PPARγ activation in macrophages could be a promising therapeutic strategy for high-risk plaques.
Assuntos
PPAR gama/metabolismo , Animais , Macrófagos/efeitos dos fármacos , Macrófagos/metabolismo , Camundongos , Camundongos Endogâmicos C57BL , Camundongos Mutantes , Imagem Óptica , PPAR gama/agonistas , Placa Aterosclerótica/tratamento farmacológico , Pirimidinas/uso terapêutico , Células RAW 264.7 , Transdução de Sinais/efeitos dos fármacos , Tiazolidinedionas/uso terapêuticoRESUMO
A new AFM system was designed for the establishment of a standard technique of nano-length measurement in a 2D plane. In a long range (about several tens of micrometers), measurement uncertainty is dominantly affected by the Abbe error of the XY scanning stage. No linear stage is perfectly straight; in other words, every scanning stage is subject to tilting, pitch and yaw motions. In this paper, an AFM system with minimum offsets of XY sensing is designed. Moreover, the XY scanning stage is designed to minimize the rotation angle, as Abbe errors occur through multiple combination of the offset and the rotation angle. To minimize the rotation angle, an optimal design is performed by maximizing the ratio of the stiffness of the parasitic direction to the motion direction of each stage. This paper describes a design scheme of a full AFM system, in particular, the XY scanner. The full range of a fabricated XY scanner is 100 microm x 100 microm. The tilting, pitch and yaw motions are measured by an autocollimator to evaluate the performance of the XY stage. The results show that the XY scanner have a 0.75 arcsec parasitic rotation about the maximum range, thus the uncertainty in terms of the Abbe errors are very small relative to other standard equipment. Using this AFM system, a 3mum pitch specimen was measured. The measurement uncertainty of the total system was evaluated especially about pitch length. For a 1D evaluation, Abbe errors are the most dominant factor, and the expanded combined uncertainty (k = 2) of system was square root (4.13)(2)+(5.07 x 10(-5)xp)(2)(nm). For a 2D evaluation, mirror non-orthogonality and Abbe errors are dominant factors, and expanded combined uncertainty (k = 2) of the system was square root (4.13)(2)+(1.228 x 10(-4)xp)(2) in the X direction, and square root (6.28)(2)+(1.266 x 10(-4)xp)(2) in the Y direction (the unit is nanometers), where p is the measured length in nm.
RESUMO
High internal phase emulsions have been widely used as templates for various porous materials, but special strategies are required to form, in particular, particle-covered ones that have been more difficult to obtain. Here, we report a versatile strategy to produce a stable high internal phase Pickering emulsion by exploiting a depletion interaction between an emulsion droplet and a particle using water-soluble polymers as a depletant. This attractive interaction facilitating the adsorption of particles onto the droplet interface and simultaneously suppressing desorption once adsorbed. This technique can be universally applied to nearly any kind of particle to stabilize an interface with the help of various non- or weakly adsorbing polymers as a depletant, which can be solidified to provide porous materials for many applications.
RESUMO
In this paper, the development of compact transmission soft x-ray microscopy (XM) with sub-50 nm spatial resolution for biomedical applications is described. The compact transmission soft x-ray microscope operates at lambda = 2.88 nm (430 eV) and is based on a tabletop regenerative x-ray source in combination with a tandem ellipsoidal condenser mirror for sample illumination, an objective micro zone plate and a thinned back-illuminated charge coupled device to record an x-ray image. The new, compact x-ray microscope system requires the fabrication of proper x-ray optical devices in order to obtain high-quality images. For an application-oriented microscope, the alignment procedure is fully automated via computer control through a graphic user interface. In imaging studies using our compact XM system, a gold mesh image was obtained with 45 nm resolution at x580 magnification and 1 min exposure. Images of a biological sample (Coscinodiscus oculoides) were recorded.
Assuntos
Microanálise por Sonda Eletrônica/métodos , Raios X , Diatomáceas/ultraestrutura , Processamento de Imagem Assistida por Computador , Lasers , Microscopia , Microscopia Eletrônica de Transmissão/métodos , Dispositivos Ópticos , Fótons , SoftwareRESUMO
A fast and ultra-sensitive trace analysis of methyl parathion pesticides in a polydimethylsiloxane (PDMS) microfluidic channel was investigated using confocal surface-enhanced Raman spectroscopy (SERS). A three-dimensional PDMS-based passive micromixer was fabricated for this purpose. This PDMS micromixer showed a high mixing efficiency because a strong chaotic advection was developed by the simultaneous vertical and transverse dispersion of the confluent streams. The confocal SERS signal was measured after methyl parathion pesticides were effectively adsorbed onto silver nanoparticles while flowing along the upper and lower alligator-teeth-shaped PDMS channel. A quantitative analysis of the methyl parathion pesticides was performed based on the measured peak height at 1246 cm-1. Our method has a detection limit of 0.1 ppm. This value satisfies the requirement recommended by the Collaborative International Pesticides Analytical Council (CIPAC) for the determination of methyl parathion in pesticide formulations. This study demonstrates the feasibility of using confocal SERS for the highly sensitive detection of methyl parathion pesticides in a PDMS microfluidic channel.
Assuntos
Dimetilpolisiloxanos/química , Metil Paration/análise , Técnicas Analíticas Microfluídicas/instrumentação , Microscopia Confocal/métodos , Praguicidas/análise , Silicones/química , Análise Espectral Raman/métodos , Calibragem , Sensibilidade e Especificidade , Compostos de Prata/químicaRESUMO
Rapid and highly sensitive detection of duplex dye-labelled DNA sequences in a PDMS microfluidic channel was investigated using confocal surface enhanced Raman spectroscopy (SERS). This method does not need either an immobilization procedure or a PCR amplification procedure, which are essential for a DNA microarray chip. Furthermore, Raman peaks of each dye-labelled DNA can be easily resolved since they are much narrower than the corresponding broad fluorescence bands. To find the potential applicability of confocal SERS for sensitive bio-detection in a microfluidic channel, the mixture of two different dye-labelled (TAMRA and Cy3) sex determining Y genes, SRY and SPGY1, was adsorbed on silver colloids in the alligator teeth-shaped PDMS microfluidic channel and its SERS signals were measured under flowing conditions. Its major SERS peaks were observable down to the concentration of 10(-11) M. In the present study, we explore the feasibility of confocal SERS for the highly sensitive detection of duplex dye-labelled DNA oligonucleotides in a PDMS microfluidic chip.
Assuntos
Corantes/química , DNA/química , Dimetilpolisiloxanos/química , Técnicas Analíticas Microfluídicas , Análise de Sequência com Séries de Oligonucleotídeos , Oligonucleotídeos/química , Coloides/química , DNA/análise , Técnicas Analíticas Microfluídicas/instrumentação , Técnicas Analíticas Microfluídicas/métodos , Microscopia Confocal/métodos , Análise de Sequência com Séries de Oligonucleotídeos/instrumentação , Análise de Sequência com Séries de Oligonucleotídeos/métodos , Oligonucleotídeos/análise , Sensibilidade e Especificidade , Prata/química , Análise Espectral Raman/métodos , Propriedades de SuperfícieRESUMO
A nonresonant, fiber-optic raster scanning endomicroscope was developed using a quarter-tubular piezoelectric (PZT) actuator. A fiber lever mechanism was utilized to enhance the small actuation range of the tubular PZT actuator and to increase its field-of-view. Finite element method simulation of the endoscopic probe was conducted for various conditions to maximize its scanning range. After fabricating the probe using a double clad fiber, we obtained two-photon fluorescence images using raster beam scanning of the fiber. The outer diameter of the probe was 3.5 mm and its rigid distal length was 30 mm including a high numerical aperture gradient index lens. These features are sufficient for input into the instrumental channel of a commercial colonoscope or gastroscope to obtain high resolution images in vivo.
Assuntos
Endoscopia/métodos , Tecnologia de Fibra Óptica , Microscopia/métodos , Animais , Colonoscopia/instrumentação , Colonoscopia/métodos , Simulação por Computador , Eletrônica , Endoscopia/instrumentação , Desenho de Equipamento , Análise de Elementos Finitos , Gastroenteropatias/diagnóstico , Processamento de Imagem Assistida por Computador , Rim/patologia , Camundongos , Fótons , RefratometriaRESUMO
We developed a multimodal microscopy based on an optical scanning system in order to obtain diverse optical information of the same area of a sample. Multimodal imaging researches have mostly depended on a commercial microscope platform, easy to use but restrictive to extend imaging modalities. In this work, the beam scanning optics, especially including a relay lens, was customized to transfer broadband (400-1000 nm) lights to a sample without any optical error or loss. The customized scanning optics guarantees the best performances of imaging techniques utilizing the lights within the design wavelength. Confocal reflection, confocal fluorescence, and two-photon excitation fluorescence images were obtained, through respective implemented imaging channels, to demonstrate imaging feasibility for near-UV, visible, near-IR continuous light, and pulsed light in the scanning optics. The imaging performances for spatial resolution and image contrast were verified experimentally; the results were satisfactory in comparison with theoretical results. The advantages of customization, containing low cost, outstanding combining ability and diverse applications, will contribute to vitalize multimodal imaging researches.
Assuntos
Microscopia Confocal/instrumentação , Microscopia de Fluorescência por Excitação Multifotônica/instrumentação , Animais , Desenho de Equipamento , Raios Infravermelhos , Rim/citologia , Lentes , Fígado/citologia , Camundongos , Raios UltravioletaRESUMO
This paper presents the development of a new compact three-axis compliant stage employing piezoelectric actuators and a new flexure structure. A proposed stage works out-of-plane (Z, θx, θy) direction. The stage consists of 4 amplification flexures mounted piezoelectric actuators. New structure of flexure reduces height and enhances dynamic performance of stage. To certify excellent performance of the stage, comparison accomplished between conventional amplification flexure and new compact bridge type flexure. Modeling and optimal design of new type nano positioning stage performed. The optimal design is executed on the geometric parameters of the proposed flexure structure using Sequential Quadratic Programming. Experiments are carried out to verify the static and dynamic performance of the stage. The proposed out-of-plane nano-positioning stage has a Z-directional motion range 190 µm and a θx, θy-directional motion range ±2 mrad. The resolution of the stage is 4 nm, 40 nrad, and 40 nrad in the Z-, θx-, and θy-directional motions, respectively. The size of stage is 150 × 150 × 30 mm(3).
RESUMO
In this study, we describe the development of a novel, compact, and long range in-plane XYθ(z) nano-positioning stage with piezoelectric actuator and flexure mechanism. The stage is composed of an X-directional motion part and a Y, θ(z)-directional motion part, which are linked serially. The stage consists of a bridge-type amplifying mechanism for the amplification of deformation of the piezoelectric actuator, a double compound guide mechanism for performing only desired motion, and a circular hinge mechanism that permits rotational motion in the Y and θ(z)-stages. To set the design variables of the stage, optimal design is carried out. To verify the results of the optimal design process and the performance of the stage, the FEM simulation and experiment are carried out. The proposed XYθ(z) nano-positioning stage has a translational motion range of 700 µm and a rotational motion range of 0.3°; it has a closed-loop resolution of 5 nm, 5 nm, and 0.025 arcsec in the X-, Y-, and θ(z)-directional motions, respectively. The proposed stage is a novelty in that it has a compact size of 200 × 200 × 30 mm(3), and decoupled kinematic design.
RESUMO
Spectral (or multi-color) microscopy has the ability to detect the fluorescent light of biological specimens with a broad range of wavelengths. Currently, the acousto-optic tunable filter (AOTF) is widely used in spectral microscopy as a substitute for a multiple-dichroic mirror to divide excitation and emission signals while maintaining sufficient light efficiency. In addition, systems which utilize an AOTF have a very fast switching speed and high resolution for wavelength selection. In this paper, confocal-spectral microscopy is proposed with a particular spectrometer design with a wavelength-scanning galvano-mirror. This enables the detection of broadband (480-700 nm) fluorescence signals by a single point detector (photomultiplier tube) instead of a CCD pixel array. For this purpose, a number of optical elements were applicably designed. A prism is used to amplify the dispersion angle, and the design of the relay optics matches the signals to the diameter of the wavelength-scanning galvano-mirror. Also, a birefringent material known as calcite is used to offset the displacement error at the image plane depending on the polarization states. The proposed multi-color confocal microscopy with the unique detection body has many advantages in comparison with commercial devices. In terms of the detection method, it can be easily applied to other imaging modalities.
RESUMO
This paper describes the design, modeling, optimization, and validation of an active vibration isolation system using a voice coil motor. The active vibration isolating method was constructed with a passive isolator and an active isolator. A spring was used for passive isolating; an actuator was used for active isolating. The proposed active vibration isolation system (AVIS) can isolate disturbances for many kinds of instruments. Until now, developed AVIS were able to isolate a six degree-of-freedom disturbance effectively. This paper proposes the realization of such a six degree-of-freedom active vibration isolation system that can work as a bench top device for precision measuring machines such as atomic force microscope, scanning probe microscope, etc.
RESUMO
Flexure mechanisms have been widely used for nanometer positioning systems. This article presents a novel conceptual design of an ultra-precision 3-degrees of freedom (XYθ(Z)) positioning system with nanometer precision. The main purpose of this novel stage design is for the application of measurement equipment, in particular biological specimens. The stage was designed as a hollow type and with a compact size for the inverted microscope. This stage includes piezoelectric transducer actuators, double compound amplification mechanisms, moving plate, and capacitor sensors. The double compound amplification mechanism was designed using a mathematical model and analyzed by the finite element method. Since the relationship between the variables of the hinge parameters and system performances are complicated, an optimization procedure was used to obtain the optimal design parameters, which maximized the system bandwidth. Based on the solution of the optimization problem, the design of the stage and FEM simulation results are presented. Finally, the stage was manufactured and tested.
Assuntos
Fenômenos Mecânicos , Nanotecnologia/instrumentação , Desenho de Equipamento , Modelos TeóricosRESUMO
A simple structure of spectral fluorescence lifetime imaging microscope (SLIM) is designed with the use of tunable bandpass filter, a kind of Fabry-perot filter that transmission wavelength is varying according to incident angle of light. Feasibility tests of this angle-tuned bandpass filter (ATBF) are performed and it shows high transmission and constant spectral bandwidth (20 nm) with respect to angle of incidence. Furthermore, using two ATBFs in series, spectral bandwidth can be adjustable down to 4 nm. In this paper, dual ATBFs are implemented to the detection part of fluorescence lifetime imaging microscope (FLIM) system so that we obtained spectrally resolved FLIM images. We compare these SLIM images with an original FLIM image and confirm that the former case provides high accuracy to analyze lifetime distribution as well as high contrast of images. The proposed SLIM microscope with good wavelength selectivity has many opportunities to utilize to other applications such as FLIM-Föster resonant energy transfer and autofluorescence imaging.
Assuntos
Microscopia de Fluorescência/instrumentação , Análise Espectral/instrumentação , Idoso , Estudos de Viabilidade , Feminino , Humanos , Pulmão/citologiaRESUMO
An integrated allele-specific (AS) polymerase chain reaction (PCR) and capillary electrophoresis (CE) microdevice has been developed for multiplex single nucleotide polymorphism (SNP) genotyping on a portable instrumentation, which was applied for on-site identification of HANWOO (Korean indigenous beef cattle). Twelve sets of primers were designed for targeting beef cattle's eleven SNP loci for HANWOO verification and one primer set for a positive PCR control, and the success rate for identification of HANWOO was demonstrated statistically. The AS PCR and CE separation for multiplex SNP typing was carried out on a glass-based microchip consisting of four layers: a microchannel plate for microfluidic control, a Pt-electrode plate for a resistance temperature detector (RTD), a poly(dimethylsiloxane) (PDMS) membrane and a manifold glass for microvalve function. The operation of the sample loading, AS PCR, microvalve, and CE on a chip was automated with a portable genetic analyzer, and the laser-induced fluorescence detection was performed on a miniaturized fluorescence detector. The blind samples were correctly identified as a HANWOO by showing one or two amplicon peaks in the electropherogram, while the imported beef cattle revealed more than five peaks. Our genetic analysis platform provides rapid, accurate, and on-site multiplex SNP typing.
Assuntos
Bovinos/genética , Eletroforese Capilar/instrumentação , Técnicas de Genotipagem/instrumentação , Dispositivos Lab-On-A-Chip , Reação em Cadeia da Polimerase/instrumentação , Polimorfismo de Nucleotídeo Único , Alelos , Animais , Sequência de Bases , Bovinos/classificação , Primers do DNA/genética , Eletroforese Capilar/métodos , Desenho de Equipamento , Frequência do Gene , Técnicas de Genotipagem/métodos , Reação em Cadeia da Polimerase/métodos , República da Coreia , Especificidade da EspécieRESUMO
An integrated allele-specific polymerase chain reaction (AS PCR) and microarray chip has been developed for multiplex single nucleotide polymorphism (SNP) typing on a portable genetic analyzer instrumentation. We applied the integrated PCR-microarray system for on-site Hanwoo (Korean indigenous beef cattle) identification. Eleven sets of primers were designed, among which ten sets of primers targeted ten SNP loci to discriminate Hanwoo from the imported beef cattle and one primer set was used as a positive PCR control. The AS PCR for multiplex SNP typing was conducted on a glass-based microchip consisting of four layers: a microchannel plate for microfluidic control, a Pt-electrode plate for a resistance temperature detector (RTD), a poly(dimethylsiloxane) (PDMS) membrane and a manifold glass for micropump and microvalve function. The resultant AS PCR products were mixed with a hybridization buffer in a micromixer channel through the micropumping operation, and then the microarray assay was performed in the downstream process. Eleven duplicate probes were spotted in a glass slide, which was connected at the end of the micromixer channel unit. When the mixed solution was injected into the disposable microarray chip, pneumatically actuated micropumping was executed to speed up the hybridization process by inducing the convective flow. The fluorescence signals on each spot were monitored by a miniaturized fluorescence scanner, and the Hanwoo was verified by detecting the number of fluorescent spots with three or fewer among eleven. An integrated portable PCR-microarray genetic analysis microsystem was first demonstrated for rapid, accurate, and on-site multiplex SNP typing to differentiate animal species.