Synthesis and Characterization of Catalytically Active Au Core─Pd Shell Nanoparticles Supported on Alumina.

A two-step seeded-growth method was refined to synthesize Au@Pd core@shell nanoparticles with thin Pd shells, which were then deposited onto alumina to obtain a supported Au@Pd/Al2O3 catalyst active for prototypical CO oxidation. By the strict control of temperature and Pd/Au molar ratio and the use of l-ascorbic acid for making both Au cores and Pd shells, a 1.5 nm Pd layer is formed around the Au core, as evidenced by transmission electron microscopy and energy-dispersive spectroscopy. The core@shell structure and the Pd shell remain intact upon deposition onto alumina and after being used for CO oxidation, as revealed by additional X-ray diffraction and X-ray photoemission spectroscopy before and after the reaction. The Pd shell surface was characterized with in situ infrared (IR) spectroscopy using CO as a chemical probe during CO adsorption-desorption. The IR bands for CO ad-species on the Pd shell suggest that the shell exposes mostly low-index surfaces, likely Pd(111) as the majority facet. Generally, the IR bands are blue-shifted as compared to conventional Pd/alumina catalysts, which may be due to the different support materials for Pd, Au versus Al2O3, and/or less strain of the Pd shell. Frequencies obtained from density functional calculations suggest the latter to be significant. Further, the catalytic CO oxidation ignition-extinction processes were followed by in situ IR, which shows the common CO poisoning and kinetic behavior associated with competitive adsorption of CO and O2 that is typically observed for noble metal catalysts.

Plasmonic Temperature-Programmed Desorption.

Temperature-programmed desorption (TPD) allows for the determination of the bonding strength and coverage of molecular mono- or multilayers on a surface and is widely used in surface science. In its traditional form using a mass spectrometric readout, this information is derived indirectly by analysis of resulting desorption peaks. This is problematic because the mass spectrometer signal not only originates from the sample surface but also potentially from other surfaces in the measurement chamber. As a complementary alternative, we introduce plasmonic TPD, which directly measures the surface coverage of molecular species adsorbed on metal nanoparticles at ultrahigh vacuum conditions. Using the examples of methanol and benzene on Au nanoparticle surfaces, the method can resolve all relevant features in the submonolayer and multilayer regimes. Furthermore, it enables the study of two types of nanoparticles simultaneously, which is challenging in a traditional TPD experiment, as we demonstrate specifically for Au and Ag.

Catalytically Active Pd-Ag Alloy Nanoparticles Synthesized in Microemulsion Template.

This work investigates the possibility to form catalytically active bimetallic Pd-Ag nanoparticles synthesized in the water pools of a reversed microemulsion using methanol, a more environmental- and user-friendly reductant compared to hydrazine or sodium borohydride, which are commonly used for this type of synthesis. The nanoparticles were characterized with regards to crystallinity and size by X-ray diffraction and transmission electron microscopy. CO chemisorption and oxidation followed by in situ diffuse reflectance infrared Fourier transform spectroscopy (DRIFTS) was used for investigating the elemental composition of the surface and catalytic activity, respectively. Moreover, the structural composition of the bimetallic particles was determined by scanning transmission electron microscopy coupled with energy-dispersive X-ray spectroscopy. The particles were shown to be crystalline nanoalloys of around 5-12 nm. CO adsorption followed by in situ DRIFTS suggests that the particle surfaces are composed of the same Pd-Ag ratios as the entire particles, regardless of elemental ratio (i.e., no core-shell structures can be detected). This is also shown by numerical simulations using a Monte Carlo based model. Furthermore, CO oxidation confirms that the synthesized particles are catalytically active.

Synthesis of Cu Nanoparticles: Stability and Conversion into Cu2S Nanoparticles by Decomposition of Alkanethiolate.

A lean synthesis of copper nanoparticles (Cu NP) from CuCl2 in dodecane via formation of Cu(I)-dodecanethiolate (Cu(I)-DDT) and their decomposition paths including spontaneous C-S bond cleavage of the alkanethiol on the surface of Cu NP is presented. The reduction of Cu(I)-DDT by the tert-butylamine-borane complex (TBAB) in dodecane under N2 at elevated temperatures leads to the formation of thiol-protected Cu NP with narrow size distribution in the size range of 3-10 nm depending on the reaction conditions. The Cu NP in the presence of excess dodecanethiol reacts further to Cu2S NP under decomposition of the ligand on the particle surface. The Cu2S formation occurs after a short time at T > 175 °C or within ∼12 h at room temperature. If excess thiol is removed immediately after the synthesis, the resulting colloid shows irreversible aggregation within days or hours. Our results suggest that alkanethiols are not long-term stable on nanocopper surfaces and that the formation of copper(I) sulfide under the cleavage of the C-S bond occurs even at room temperature.

Synthesis of highly monodisperse Pd nanoparticles using a binary surfactant combination and sodium oleate as a reductant.

This study presents the synthesis of monodisperse Pd nanoparticles (NPs) stabilized by sodium oleate (NaOL) and hexadecyltrimethylammonium chloride (CTAC). The synthesis was conducted without traditional reductants and Pd-precursors are reduced by NaOL. It was confirmed that the alkyl double bond in NaOL is not the only explanation for the reduction of Pd-precursors since Pd NPs could be synthesized with CTAC and the saturated fatty acid sodium stearate (NaST). A quantitative evaluation of the reduction kinetics using UV-Vis spectroscopy shows that Pd NPs synthesized with both stabilizer combinations follow pseudo first-order reaction kinetics, where NaOL provides a faster and more effective reduction of Pd-precursors. The colloidal stabilization of the NP surface by CTAC and NaOL is confirmed by Fourier transform infrared (FTIR) and nuclear magnetic resonance (NMR) analysis.

Continuous Microfluidic Synthesis of Pd Nanocubes and PdPt Core-Shell Nanoparticles and Their Catalysis of NO2 Reduction.

Faceted colloidal nanoparticles are currently of immense interest due to their unique electronic, optical, and catalytic properties. However, continuous flow synthesis that enables rapid formation of faceted nanoparticles of single or multi-elemental composition is not trivial. We present a continuous flow synthesis route for the synthesis of uniformly sized Pd nanocubes and PdPt core-shell nanoparticles in a single-phase microfluidic reactor, which enables rapid formation of shaped nanoparticles with a reaction time of 3 min. The PdPt core-shell nanoparticles feature a dendritic, high surface area with the Pt shell covering the Pd core, as verified using high-resolution scanning transmission electron microscopy and energy dispersive X-ray spectroscopy. The Pd nanocubes and PdPt core-shell particles are catalytically tested during NO2 reduction in the presence of H2 in a flow pocket reactor. The Pd nanocubes exhibited low-temperature activity (i.e., <136 °C) and poor selectivity performance toward production of N2O or N2, whereas PdPt core-shell nanoparticles showed higher activity and were found to achieve better selectivity during NO2 reduction retaining its basic structure at relatively elevated temperatures, making the PdPt core-shell particles a unique, desirable synergic catalyst material for potential use in NOx abatement processes.

Methane adsorption and methanol desorption of copper modified boron silicate.

Boron silicate (BS) with a chabazite framework structure was synthesised using a direct route and rigorously characterized before it was ion-exchanged with copper to form Cu-BS. Employing in situ infrared spectroscopy, we show that Cu-BS is capable of oxidising methane to methoxy species and methanol interacts with the boron sites without deprotonation.