Pharmacokinetics of eperisone following oral administration in healthy Korean volunteers.

Eperisone is an oral muscle relaxant used to treat musculoskeletal diseases, which exhibits high pharmacokinetic (PK) variability in bioequivalence studies. The aim of this study was to characterize the PKs of eperisone following its oral administration to Korean volunteers through the conduct of a noncompartmental and population analysis. A total of 360 concentration-time measurements collected on two separate occasions from 15 healthy volunteers during a bioequivalent study of eperisone 50 mg (Murex® ) were used in the PK analysis. Noncompartmental analysis was performed using WinNonLinTM and population analysis was performed using NONMEM® . The possible influence of thirty demographic and pathophysiological characteristics on the PKs of eperisone were explored. Based on noncompartmental analysis mean eperisone elimination half-life, apparent clearance (CL/F), and apparent volume of distribution were estimated to be 3.81 h, 39.24 × 103  l/h × 103  L, respectively. During population PK modeling a two-compartment model with first-order absorption rate constant (typical population K a  = 1.5 h-1 ) and first-order elimination (typical population CL/F and apparent volume of distribution in the central compartment [V c /F] = 30.8 × 103  l/h and 86.2 × 103  l, respectively) best described the PKs of eperisone. Interindividual variability in CL/F and V c /F were estimated to be 87.9% and 130.3%, respectively and interoccasion variability in CL/F and V c /F were estimated to be 23.8% and 30.8%, respectively. Aspartate aminotransferase level and smoking status were identified as potential covariates that may influence the CL/F of eperisone. This is the first study to develop a disposition model for eperisone and investigate the potential influence of covariate factors on it PK variability.

Pharmacokinetic and bioequivalence study of sugar-coated and film-coated eperisone tablets in healthy subjects: A randomized, open-label, three-way, reference-replicated crossover study
.

OBJECTIVE: Eperisone hydrochloride is used in the treatment of musculoskeletal disorders as a muscle relaxant via blocking of calcium channels. In this study, we aimed to investigate the within-subject variability (CVwR) of reference eperisone formulation for highly-variable drugs and to perform bioequivalence study of two oral formulations (sugar- and film-coated tablets) of eperisone hydrochloride 50 mg in healthy subjects by reference-replicated crossover study. MATERIALS AND METHODS: 36 healthy Korean male subjects were recruited, and 33 subjects completed the study. A randomized, single-dose, open-label, three-way, three-sequence, reference formulation-replicated, crossover bioequivalence study was conducted to determine the bioequivalence of eperisone. Blood samples were collected before dosing and at 0.33, 0.67, 1, 1.5, 2, 2.5, 3, 4, 6, 8, and 12 hours after dosing. The plasma concentration of eperisone was determined using liquid chromatography-tandem mass spectrometry. RESULTS: The CVwR of eperisone reference product was 33.17% for AUCt and 50.21% for Cmax. The acceptance limit for Cmax was scaled to 0.6984 - 1.4319 according to CVwR. The 90% confidence intervals for the test/reference geometric mean ratio were 0.8275 - 1.1692 for AUCt and 0.7587 - 1.1652 for Cmax, which were within the accepted bioequivalence limits. Single oral doses of eperisone hydrochloride 50 mg were generally well tolerated in healthy adult subjects in this study. CONCLUSION: The newly developed film-coated tablet can be interchanged with the original sugar-coated tablet of eperisone. In addition, the reference scaling methods are more effective and economical than the classical method for assessing BE of HVDs.
.

A Simple HPLC Method for the Quantitative Determination of Silybin in Rat Plasma: Application to a Comparative Pharmacokinetic Study on Commercial Silymarin Products.

Silybin (SBN) is a major active constituent of silymarin, a mixture of flavonoids found in fruits and seeds of milk thistle. The aim of this study was to describe a simple bioanalytical method for quantifying SBN in rat plasma. A simple protein deproteinization procedure with acetonitrile (ACN) was employed for plasma sample preparation. A reversed column and gradient elution of a mobile phase (mixture of phosphate buffer (pH 5.0) and ACN) were used for chromatographic separation. The selectivity, linearity (50-5000 ng/mL), precision, accuracy, recovery, matrix effect, and stability for this method were validated as per the current Food and Drug Administration (FDA) guidelines. Our method for SBN was applied to a comparative pharmacokinetic study on four different commercial silymarin products. This in vivo rat study demonstrated that product #4 significantly enhanced the relative oral bioavailability of SBN, as compared to product #1-3. Therefore, the bioanalytical method proposed herein could serve as a promising alternative for preclinical pharmacokinetic studies on silymarin products and, by extension, clinical use after partial modification and validation.

Preparation and in vivo evaluation of a dutasteride-loaded solid-supersaturatable self-microemulsifying drug delivery system.

The purpose of this study was to prepare a dutasteride-loaded solid-supersaturatable self-microemulsifying drug delivery system (SMEDDS) using hydrophilic additives with high oral bioavailability, and to determine if there was a correlation between the in vitro dissolution data and the in vivo pharmacokinetic parameters of this delivery system in rats. A dutasteride-loaded solid-supersaturatable SMEDDS was generated by adsorption of liquid SMEDDS onto Aerosil 200 colloidal silica using a spray drying process. The dissolution and oral absorption of dutasteride from solid SMEDDS significantly increased after the addition of hydroxypropylmethyl cellulose (HPMC) or Soluplus. Solid SMEDDS/Aerosil 200/Soluplus microparticles had higher oral bioavailability with 6.8- and 5.0-fold higher peak plasma concentration (Cmax) and area under the concentration-time curve (AUC) values, respectively, than that of the equivalent physical mixture. A linear correlation between in vitro dissolution efficiency and in vivo pharmacokinetic parameters was demonstrated for both AUC and Cmax values. Therefore, the preparation of a solid-supersaturatable SMEDDS with HPMC or Soluplus could be a promising formulation strategy to develop novel solid dosage forms of dutasteride.

Enhanced supersaturation and oral absorption of sirolimus using an amorphous solid dispersion based on Eudragit® e.

The present study aimed to investigate the effect of Eudragit® E/HCl (E-SD) on the degradation of sirolimus in simulated gastric fluid (pH 1.2) and to develop a new oral formulation of sirolimus using E-SD solid dispersions to enhance oral bioavailability. Sirolimus-loaded solid dispersions were fabricated by a spray drying process. A kinetic solubility test demonstrated that the sirolimus/E-SD/TPGS (1/8/1) solid dispersion had a maximum solubility of 196.7 µg/mL within 0.5 h that gradually decreased to 173.4 µg/mL after 12 h. According to the dissolution study, the most suitable formulation was the sirolimus/E-SD/TPGS (1/8/1) solid dispersion in simulated gastric fluid (pH 1.2), owing to enhanced stability and degree of supersaturation of E-SD and TPGS. Furthermore, pharmacokinetic studies in rats indicated that compared to the physical mixture and sirolimus/HPMC/TPGS (1/8/1) solid dispersion, the sirolimus/E-SD/TPGS (1/8/1) solid dispersion significantly improved oral absorption of sirolimus. E-SD significantly inhibited the degradation of sirolimus in a dose-dependent manner. E-SD also significantly inhibited the precipitation of sirolimus compared to hydroxypropylmethyl cellulose (HPMC). Therefore, the results from the present study suggest that the sirolimus-loaded E-SD/TPGS solid dispersion has great potential in clinical applications.

Preparation and evaluation of solid dispersion of atorvastatin calcium with Soluplus® by spray drying technique.

The aim of the present study was to investigate the effect of Soluplus® on the solubility of atorvastatin calcium and to develop a solid dispersion formulation that can improve the oral bioavailability of atorvastatin calcium. We demonstrated that Soluplus® increases the aqueous solubility of atorvastatin calcium. Several solid dispersion formulations of atorvastatin calcium with Soluplus® were prepared at various drug : carrier ratios by spray drying. Physicochemical analysis demonstrated that atorvastatin calcium is amorphous in each solid dispersion, and the 2 : 8 drug : carrier ratio provided the highest degree of sustained atorvastatin supersaturation. Pharmacokinetic analysis in rats revealed that the 2 : 8 dispersion significantly improved the oral bioavailability of atorvastatin. This study demonstrates that spray-dried Soluplus® solid dispersions can be an effective method for achieving higher atorvastatin plasma levels.

Formulation, characterization, and in vivo evaluation of celecoxib-PVP solid dispersion nanoparticles using supercritical antisolvent process.

The aim of this study was to develop celecoxib-polyvinylpyrrolidone (PVP) solid dispersion nanoparticles with and without surfactant using the supercritical antisolvent (SAS) process. The effect of different surfactants such as gelucire 44/14, poloxamer 188, poloxamer 407, Ryoto sugar ester L1695, and d-α-tocopheryl polyethylene glycol 1000 succinate (TPGS) on nanoparticle formation and dissolution as well as oral absorption of celecoxib-PVP K30 solid dispersion nanoparticles was investigated. Spherical celecoxib solid dispersion nanoparticles less than 300 nm in size were successfully developed using the SAS process. Analysis by differential scanning calorimetry and powder X-ray diffraction showed that celecoxib existed in the amorphous form within the solid dispersion nanoparticles fabricated using the SAS process. The celecoxib-PVP-TPGS solid dispersion nanoparticles significantly enhanced in vitro dissolution and oral absorption of celecoxib relative to that of the unprocessed form. The area under the concentration-time curve (AUC0→24 h) and peak plasma concentration (Cmax) increased 4.6 and 5.7 times, respectively, with the celecoxib-PVP-TPGS formulation. In addition, in vitro dissolution efficiency was well correlated with in vivo pharmacokinetic parameters. The present study demonstrated that formulation of celecoxib-PVP-TPGS solid dispersion nanoparticles using the SAS process is a highly effective strategy for enhancing the bioavailability of poorly water-soluble celecoxib.

Injectable sustained-release poly(lactic-co-glycolic acid) (PLGA) microspheres of exenatide prepared by supercritical fluid extraction of emulsion process based on a design of experiment approach.

This study aimed to develop an improved sustained-release (SR) PLGA microsphere of exenatide using supercritical fluid extraction of emulsions (SFEE). As a translational research, we investigated the effect of various process parameters on the fabrication of exenatide-loaded PLGA microspheres by SFEE (ELPM_SFEE) using the Box-Behnken design (BBD), a design of experiment approach. Further, ELPM obtained under optimized conditions and satisfying all the response criteria were compared with PLGA microspheres prepared using the conventional solvent evaporation (ELPM_SE) method through various solid-state characterizations and in vitro and in vivo evaluations. The four process parameters selected as independent variables were pressure (X 1), temperature (X 2), stirring rate (X 3), and flow ratio (X 4). The effects of these independent variables on five responses, namely the particle size, its distribution (SPAN value), encapsulation efficiency (EE), initial drug burst release (IBR), and residual organic solvent, were evaluated using BBD. Based on the experimental results, a desirable range of combinations of various variables in the SFEE process was determined by graphical optimization. Solid-state characterization and in vitro evaluation revealed that ELPM_SFEE improved properties, including a smaller particle size and SPAN value, higher EE, lower IBR, and lower residual solvent. Furthermore, the pharmacokinetic and pharmacodynamic study results indicated better in vivo efficacy with desirable SR properties, including a reduction in blood glucose levels, weight gain, and food intake, for ELPM_SFEE than those generated using SE. Therefore, the potential drawback of conventional technologies such as the SE for the preparation of injectable SR PLGA microspheres could be improved by optimizing the SFEE process.

Preparation of Hot-Melt-Extruded Solid Dispersion Based on Pre-Formulation Strategies and Its Enhanced Therapeutic Efficacy.

In this study, an amorphous solid dispersion containing the poorly water-soluble drug, bisacodyl, was prepared by hot-melt extrusion to enhance its therapeutic efficacy. First, the miscibility and interaction between the drug and polymer were investigated as pre-formulation strategies using various analytical approaches to obtain information for selecting a suitable polymer. Based on the calculation of the Hansen solubility parameter and the identification of the single glass transition temperature (Tg), the miscibility between bisacodyl and all the investigated polymers was confirmed. Additionally, the drug-polymer molecular interaction was identified based on the comprehensive results of dynamic vapor sorption (DVS), Fourier transform infrared spectroscopy (FT-IR), Raman spectroscopy, and a comparison of the predicted and experimental values of Tg. In particular, the hydroxypropyl methylcellulose (HPMC)-based solid dispersions, which exhibited large deviation between the calculated and experimental values of Tg and superior physical stability after DVS experiments, were selected as the most appropriate solubilized bisacodyl formulations due to the excellent inhibitory effects on precipitation based on the results of the non-sink dissolution test. Furthermore, it was shown that the enteric-coated tablets containing HPMC-bisacodyl at a 1:4 ratio (w/w) had significantly improved in vivo therapeutic laxative efficacy compared to preparations containing un-solubilized raw bisacodyl in constipation-induced rabbits. Therefore, it was concluded that the pre-formulation strategy, using several analyses and approaches, was successfully applied in this study to investigate the miscibility and interaction of drug-polymer systems, hence resulting in the manufacture of favorable solid dispersions with favorable in vitro and in vivo performances using hot-melt extrusion processes.

Cationic nanoplastic causes mitochondrial dysfunction in neural progenitor cells and impairs hippocampal neurogenesis.

Nanoplastics (NPs) exposure to humans can occur through various routes, including the food chain, drinking water, skin contact, and respiration. NPs are plastics with a diameter of less than 100 nm and have the potential to accumulate in tissues, leading to toxic effects. This study aimed to investigate the neurotoxicity of polystyrene NPs on neural progenitor cells (NPCs) and hippocampal neurogenesis in a rodent model. Toxicity screening of polystyrene NPs based on their charge revealed that cationic amine-modified polystyrene (PS-NH3+) exhibited cytotoxicity, while anionic carboxylate-modified polystyrene (PS-COO-) and neutral NPs (PS) did not. NPCs treated with PS-NH3+ showed a significant reduction in growth rate due to G1 cell cycle arrest. PS-NH3+ increased the expression of cell cycle arrest markers p21 and p27, while decreasing cyclin D expression in NPCs. Interestingly, PS-NH3+ accumulated in mitochondria, leading to mitochondrial dysfunction and energy depletion, which caused G1 cell cycle arrest. Prolonged exposure to PS-NH3+ in C17.2 NPCs increased the expression of p16 and senescence-associated secretory phenotype factors, indicating cellular senescence. In vivo studies using C57BL/6 mice demonstrated impaired hippocampal neurogenesis and memory retention after 10 days of PS-NH3+ administration. This study suggests that NPs could deplete neural stem cell pools in the brain by mitochondrial dysfunction, thereby adversely affecting hippocampal neurogenesis and neurocognitive functions.

Active coating of immediate-release evogliptin tartrate to prepare fixed dose combination tablet with sustained-release metformin HCl.

This study was aimed to develop a fixed dose combination (FDC) tablet containing a low dose of evogliptin tartrate (6.87 mg) for immediate release combined with a high dose (1000 mg) of sustained-release (SR) metformin HCl appropriate for once daily dosing the treatment of type 2 diabetes. To prepare the FDC tablets, an active coating was used in this study, whereby evogliptin tartrate film was layered on a matrix core tablet containing metformin HCl. To overcome the problem caused by a low-dose drug in combination with a relatively large matrix tablet containing high-dose drug, it was also aimed to confirm the formulation and coating operation for satisfactory content uniformity, and to describe the chemical stability during storage of the amorphous active coating layer formulation in relation to molecular mobility. Furthermore, the in vitro release and in vivo pharmacokinetic profiles of metformin HCl and evogliptin tartrate in the FDC active coating tablet were compared to those of the commercially marketed reference drugs, Diabex XR® (Daewoong, Seoul, Korea) containing metformin HCl and Suganon® (Donga ST, Seoul, Korea) containing evogliptin tartrate. In conclusion, the newly developed FDC active coating tablet in this study was confirmed to be bioequivalent to the reference marketed products in beagle dogs, with satisfactory content uniformity and stability.

Complexation of exenatide and cyclodextrin: An approach for the stabilization and sustained release of exenatide in PLGA microsphere.

The purpose of this study was to evaluate the effects of cyclodextrins (CyDs) to stabilize exnatide in the microencapsulation medium and influence on the pharmaceutical properties of exenatide loaded PLGA microsphere. Three CyDs interacted differently with exenatide by investigation using ultraviolet, fluorescence and circular dichroism spectroscopy. The binding affinities of CyDs to the hydrophobic tryptophan residues of exenatide increased in following order: α-CyD < ß-CyD < Î³-CyD. It was consistent with orders of W/O interface stabilizing and anti-adsorption effects. However, the stabilizing effect of ß-CyD on liquid-state and freeze-drying of exenatide was greater than that of γ-CyD. The negative values of ΔH0, ΔS0, and ΔG0 indicated that the exenatide-CyDs complex formation was a favorable exothermic and spontaneous processes that increased the order in the complex with structural rigidity. Furthermore, it was also shown that ß-CyD improved encapsulation efficiency, in vitro extended release, and in vivo pharmacokinetic and pharmacodynamic properties of prepared PLGA microspheres.

Enhanced Oral Bioavailability of Resveratrol by Using Neutralized Eudragit E Solid Dispersion Prepared via Spray Drying.

In this study, we designed amorphous solid dispersions based on Eudragit E/HCl (neutralized Eudragit E using hydrochloric acid) to maximize the dissolution of trans-resveratrol. Solid-state characterization of amorphous solid dispersions of trans-resveratrol was performed using powder X-ray diffraction, scanning electron microscopy, and particle size measurements. In addition, an in vitro dissolution study and an in vivo pharmacokinetic study in rats were carried out. Among the tested polymers, Eudragit E/HCl was the most effective solid dispersion for the solubilization of trans-resveratrol. Eudragit E/HCl significantly inhibited the precipitation of trans-resveratrol in a pH 1.2 dissolution medium in a dose-dependent manner. The amorphous Eudragit E/HCl solid dispersion at a trans-resveratrol/polymer ratio of 10/90 exhibited a high degree of supersaturation without trans-resveratrol precipitation for at least 48 h by the formation of Eudragit E/HCl micelles. In rats, the absolute oral bioavailability (F%) of trans-resveratrol from Eudragit E/HCl solid dispersion (10/90) was estimated to be 40%. Therefore, trans-resveratrol-loaded Eudragit E/HCl solid dispersions prepared by spray drying offer a promising formulation strategy with high oral bioavailability for developing high-quality health supplements, nutraceutical, and pharmaceutical products.

Pharmaceutical Applications of Supercritical Fluid Extraction of Emulsions for Micro-/Nanoparticle Formation.

Micro-/nanoparticle formulations containing drugs with or without various biocompatible excipients are widely used in the pharmaceutical field to improve the physicochemical and clinical properties of the final drug product. Among the various micro-/nanoparticle production technologies, emulsion-based particle formation is the most widely used because of its unique advantages such as uniform generation of spherical small particles and higher encapsulation efficiency (EE). For this emulsion-based micro-/nanoparticle technology, one of the most important factors is the extraction efficiency associated with the fast removal of the organic solvent. In consideration of this, a technology called supercritical fluid extraction of emulsions (SFEE) that uses the unique mass transfer mechanism and solvent power of a supercritical fluid (SCF) has been proposed to overcome the shortcomings of several conventional technologies such as solvent evaporation, extraction, and spray drying. This review article presents the main aspects of SFEE technology for the preparation of micro-/nanoparticles by focusing on its pharmaceutical applications, which have been organized and classified according to several types of drug delivery systems and active pharmaceutical ingredients. It was definitely confirmed that SFEE can be applied in a variety of drugs from water-soluble to poorly water-soluble. In addition, it has advantages such as low organic solvent residual, high EE, desirable release control, better particle size control, and agglomeration prevention through efficient and fast solvent removal compared to conventional micro-/nanoparticle technologies. Therefore, this review will be a good resource for determining the applicability of SFEE to obtain better pharmaceutical quality when researchers in related fields want to select a suitable manufacturing process for preparing desired micro-/nanoparticle drug delivery systems containing their active material.

Preparation and Characterization of Fenofibrate Microparticles with Surface-Active Additives: Application of a Supercritical Fluid-Assisted Spray-Drying Process.

In this study, supercritical fluid-assisted spray-drying (SA-SD) was applied to achieve the micronization of fenofibrate particles possessing surface-active additives, such as d-α-tocopheryl polyethylene glycol 1000 succinate (TPGS), sucrose mono palmitate (Sucroester 15), and polyoxyethylene 52 stearate (Myrj 52), to improve the pharmacokinetic and pharmacodynamic properties of fenofibrate. For comparison, the same formulation was prepared using a spray-drying (SD) process, and then both methods were compared. The SA-SD process resulted in a significantly smaller mean particle size (approximately 2 µm) compared to that of unprocessed fenofibrate (approximately 20 µm) and SD-processed particles (approximately 40 µm). There was no significant difference in the effect on the particle size reduction among the selected surface-active additives. The microcomposite particles prepared with surface-active additives using SA-SD exhibited remarkable enhancement in their dissolution rate due to the synergistic effect of comparably moderate wettability improvement and significant particle size reduction. In contrast, the SD samples with the surface-active additives exhibited a decrease in dissolution rate compared to that of the unprocessed fenofibrate due to the absence of particle size reduction, although wettability was greatly improved. The results of zeta potential and XPS analyses indicated that the surface-active additive coverage on the surface layer of the SD-processed particles with a better wettability was higher than that of the SA-SD-processed composite particles. Additionally, after rapid depletion of hydrophilic additives that were excessively distributed on the surfaces of SD-processed particles, the creation of a surface layer rich in poorly water-soluble fenofibrate resulted in a decrease in the dissolution rate. In contrast, the surface-active molecules were dispersed homogeneously throughout the particle matrix in the SA-SD-processed microparticles. Furthermore, improved pharmacokinetic and pharmacodynamic characteristics were observed for the SA-SD-processed fenofibrate microparticles compared to those for the SD-processed fenofibrate particles. Therefore, the SA-SD process incorporating surface-active additives can efficiently micronize poorly water-soluble drugs and optimize their physicochemical and biopharmaceutical characteristics.

Optimization of bilayer tablet manufacturing process for fixed dose combination of sustained release high-dose drug and immediate release low-dose drug based on quality by design (QbD).

A fixed dose combination (FDC) bilayer tablet, consisting of high-dose metformin HCl in a sustained release layer and low-dose evogliptin tartrate in an immediate release layer, was developed based on a quality by design (QbD) approach. To implement QbD approach, the bilayer tableting process parameters judged as high risk through risk analysis were optimized by a central composite face-centered design as a design of experiment (DOE) methodology. Using DOE, the optimized conditions of the tableting process for drug products that satisfy the established quality target product profiles were obtained. The content uniformity of low-dose evogliptin tartrate in the optimized bilayer tablet prepared on a large scale was confirmed by at-line transmittance Raman spectroscopy as a process analytical technology. In addition, the in vitro drug release and in vivo pharmacokinetic studies showed that metformin HCl and evogliptin tartrate in the bilayer tablet is bioequivalent to those of the respective reference drugs. Furthermore, the physicochemical stability of the optimized bilayer tablet during storage under long-term and accelerated conditions was also confirmed. Therefore, it can be concluded that the QbD approach is an effective way to develop a new FDC bilayer tablet that is easy to scale up for successful commercialization.

Current Status of Supersaturable Self-Emulsifying Drug Delivery Systems.

Self-emulsifying drug delivery systems (SEDDSs) are a vital strategy to enhance the bioavailability (BA) of formulations of poorly water-soluble compounds. However, these formulations have certain limitations, including in vivo drug precipitation, poor in vitro in vivo correlation due to a lack of predictive in vitro tests, issues in handling of liquid formulation, and physico-chemical instability of drug and/or vehicle components. To overcome these limitations, which restrict the potential usage of such systems, the supersaturable SEDDSs (su-SEDDSs) have gained attention based on the fact that the inclusion of precipitation inhibitors (PIs) within SEDDSs helps maintain drug supersaturation after dispersion and digestion in the gastrointestinal tract. This improves the BA of drugs and reduces the variability of exposure. In addition, the formulation of solid su-SEDDSs has helped to overcome disadvantages of liquid or capsule dosage form. This review article discusses, in detail, the current status of su-SEDDSs that overcome the limitations of conventional SEDDSs. It discusses the definition and range of su-SEDDSs, the principle mechanisms underlying precipitation inhibition and enhanced in vivo absorption, drug application cases, biorelevance in vitro digestion models, and the development of liquid su-SEDDSs to solid dosage forms. This review also describes the effects of various physiological factors and the potential interactions between PIs and lipid, lipase or lipid digested products on the in vivo performance of su-SEDDSs. In particular, several considerations relating to the properties of PIs are discussed from various perspectives.

Pure Trans-Resveratrol Nanoparticles Prepared by A Supercritical Antisolvent Process Using Alcohol and Dichloromethane Mixtures: Effect of Particle Size on Dissolution and Bioavailability in Rats.

The aim of this study was to prepare pure trans-resveratrol nanoparticles without additives (surfactants, polymers, and sugars) using a supercritical antisolvent (SAS) process with alcohol (methanol or ethanol) and dichloromethane mixtures. In addition, in order to investigate the effect of particle size on the dissolution and oral bioavailability of the trans-resveratrol, two microparticles with different sizes (1.94 µm and 18.75 µm) were prepared using two different milling processes, and compared to trans-resveratrol nanoparticles prepared by the SAS process. The solid-state properties of pure trans-resveratrol particles were characterized. By increasing the percentage of dichloromethane in the solvent mixtures, the mean particle size of trans-resveratrol was decreased, whereas its specific surface area was increased. The particle size could thus be controlled by solvent composition. Trans-resveratrol nanoparticle with a mean particle size of 0.17 µm was prepared by the SAS process using the ethanol/dichloromethane mixture at a ratio of 25/75 (w/w). The in vitro dissolution rate of trans-resveratrol in fasted state-simulated gastric fluid was significantly improved by the reduction of particle size, resulting in enhanced oral bioavailability in rats. The absolute bioavailability of trans-resveratrol nanoparticles was 25.2%. The maximum plasma concentration values were well correlated with the in vitro dissolution rate. These findings clearly indicate that the oral bioavailability of trans-resveratrol can be enhanced by preparing pure trans-resveratrol nanoparticles without additives (surfactants, polymers, and sugars) by the SAS process. These pure trans-resveratrol nanoparticles can be applied as an active ingredient for the development of health supplements, pharmaceutical products, and cosmetic products.

Preparation and characterization of glimepiride eutectic mixture with l-arginine for improvement of dissolution rate.

In this study, glimepiride and l-arginine (GA) binary mixtures at various molar ratios were prepared to evaluate whether they could improve the poor water solubility and dissolution characteristics of glimepiride. It was shown that glimepiride and arginine form a eutectic mixture, a type of crystalline solid dispersions, at a 1:1 M ratio and eutectic temperature of 426.9 K using a phase diagram constructed using differential scanning calorimetry (DSC) and thermo-microscopy. The preserved characteristic powder X-ray diffraction (PXRD) patterns and infrared (IR) spectra of each material in those of GA binary mixtures confirmed the formation of eutectic mixture without molecular interaction in solid state. The formation of GA eutectic mixture (GAEM) resulted in the improvement of solubility through pH modification and the intermolecular interaction of glimepiride and l-arginine in aqueous mediums, thereby wettability and dissolution rate of glimepiride were also enhanced. The intermolecular interaction between glimepiride and l-arginine at a 1:1 stoichiometry of the complex in solution state was identified by phase solubility, stoichiometric determination, and solution state nuclear magnetic resonance (NMR) spectroscopy. Specific molecular interactions such as hydrogen bonding and hydrophobic interaction were suggested as main mechanisms of GA complexation in solution. Therefore, this study concludes that the GAEM could be an effective way to improve the solubility and dissolution rate of glimepiride.

Effect of Formulation Factors and Oxygen Levels on the Stability of Aqueous Injectable Solution Containing Pemetrexed.

The aim of this study was to investigate the effects of various parameters at each control strategy in drug product degradation on the stability of pemetrexed in injectable aqueous solution. A forced degradation study confirmed that oxidation is the main mechanism responsible for the degradation of pemetrexed in aqueous solutions. As control strategies, the antioxidant levels, drug concentration, pH of the control formulation, dissolved oxygen (DO) levels in the control process, and headspace oxygen levels in the control packaging were varied, and their effects on the stability of pemetrexed were evaluated. Sodium sulfite was found to be particularly effective in preventing the color change, and N-acetylcysteine (NAC) had a significant effect in preventing chemical degradation. The sulfite and NAC were found to stabilize pemetrexed in the aqueous solution by acting as sacrificial reductants. A pH below 6 caused significant degradation. The stability of pemetrexed in the solution increased as the concentration of the drug increased from 12.5 to 50 mg/mL. In addition, the DO levels in the solution were controlled by nitrogen purging, and the oxygen levels in headspace were controlled by nitrogen headspace, which also had significant positive effects in improving the stability of the pemetrexed solution; thus, it was confirmed that molecular oxygen is involved in the rate-limiting oxidation step. Based on these results obtained by observing the effects of various control strategies, the optimal formulation of an injectable solution of pemetrexed is suggested as follows: sodium sulfite at 0.06 mg/mL, as an antioxidant for prevention of color change; NAC at 1.63 mg/mL, as an antioxidant for prevention of chemical degradation; pH range 7-8; DO levels below 1 ppm; and headspace oxygen levels below 1%. In conclusion, it can be suggested that this study, which includes well-designed control strategies, can lead to a better understanding of the complex degradation mechanism of pemetrexed; thus, it can lead to the development of an injectable solution formulation of pemetrexed, with improved stability.