Association between textual and pictorial warnings on tumbac (waterpipe tobacco) boxes and motivation to quit waterpipe smoking among Lebanese and Iraqi adolescents.

BACKGROUND: Waterpipe tobacco smoking has increased tremendously at a global level among all age groups, particularly young people. Previous studies have examined the impact of waterpipe tobacco pictorial health warnings on adults but scarce studies were done on adolescents. The aim of this study was to assess the association of textual versus pictorial warnings on tumbac boxes and the motivation to quit waterpipe smoking among adolescents located in two Eastern Mediterranean countries Lebanon and Iraq. METHODS: A cross-sectional study was conducted between May and November 2022, involving 294 adolescents waterpipe smokers from Lebanon and Iraq. The questionnaire included the Lebanese Waterpipe Dependence Smoking-11, the Depression, Anxiety and Stress Scale, the Waterpipe Harm Perception Scale, Waterpipe Knowledge Scale, Waterpipe Attitude Scale, the Fagerstrom Test for Nicotine Dependence, and the Motivation to Stop Scale. RESULTS: When adjusting the results over confounding variables, the results showed that compared to finding the warnings to stop smoking not efficacious at all, adolescents who find the warnings moderately (aOR = 2.83) and very (aOR = 6.64) efficacious had higher motivation to quit. Compared to finding the warnings not increasing their curiosity for information about how to stop waterpipe smoking at all, participants who confessed that warnings increased their curiosity a little (aOR = 2.59), moderately (aOR = 3.34) and very (aOR = 3.58) had higher motivation to quit. Compared to not considering changing the tumbac brand if the company uses pictorial warnings, adolescents who would consider changing the tumbac brand (aOR = 2.15) had higher motivation to quit. CONCLUSION: Pictorial and textual warnings on waterpipe packs were associated with higher motivation to stop waterpipe smoking. Public health education programs for this purpose seem warranted.

Using COM-B model in identifying facilitators, barriers and needs of community pharmacists in implementing weight management services in Malaysia: a qualitative study.

BACKGROUND: Previous qualitative studies exploring the experiences of community pharmacists (CP) in implementing weight management services (WMS) often lack a theoretical underpinning. This study applied the capability, opportunity, motivation, behaviour (COM-B) model to factors associated with WMS implementation among CPs to develop and recommend better intervention strategies. METHODS: A qualitative study design was used by conducting in-depth, semi-structured interviews with CPs. All the interviews were audio-recorded and duly transcribed. The thematic analysis approach was used to analyse the data, and the themes generated were mapped onto COM-B model components. RESULTS: The themes that emerged were (1) motivation of pharmacists and (2) knowledge and skills, which were identified as both barriers and facilitators, and (3) the barriers to implementation in aspects of social norms and resources. Factors were subsequently categorised into the subcomponents of the model: physical capability (e.g., training), psychological capability (e.g., lack of knowledge), physical opportunity (e.g., product range), social opportunity (e.g., stigma), automatic motivation (e.g., remuneration) and reflective motivation (e.g., CPs extended roles). CONCLUSIONS: In conclusion, programs or training For Cps should develop their psychological capability to change their behaviour by being more proactive in promoting and providing weight management services, with a vital educational component. This behavioural change will improve the promotion of this service and will help many customers who were unaware of this service. Learning opportunities will leave CPs to feel more empowered and overcome barriers to implementing and maintaining WMS in primary care. The study findings provided essential insights into the factors that affect this provided service in Malaysia. The results will help to encourage the embedding of nutrition counselling in academic curricula.

Exploring the level of lockdown fatigue and effect of personal resilience and coping behaviours on university students during the covid-19 pandemic: a cross-sectional analysis from Iraq.

Governments worldwide have imposed lockdowns in their countries to restrict unnecessary movement and curb the spread and transmission of the Covid-19 as a mitigation measure. The education sector has also implemented rapid changes, and this has transformed the operational procedures for both students and lecturers. As the pandemic has progressed, its emotional and psychological toll is equally bearing on students, leading to lockdown fatigue. This study aimed to investigate the level of lockdown-induced fatigue and its correlation with personal resilience and coping skills among university students in Iraq. This study used quantitative methods of research using a cross-sectional study design. A questionnaire survey was distributed electronically among 819 university students in Iraq. The study used three standardised scales: the lockdown fatigue scale, brief resilience scale, and coping behaviours questionnaire for data collection. Descriptive and inferential statistical analysis were done using SPSS. Overall, students indicated a high level of lockdown fatigue with a mean score of 33.48out of 50. Fear of personal safety and the wellbeing of the family was the most fear expressed by the students. The ability to go through stressful times and unpleasant events was the most common worry among the students. Female, urbanised, and science field students were the most students who suffered from lockdown-induced fatigue. However, positive coping behaviours and personal resilience were significantly correlated with decreasing fatigue levels during the lockdown period. Level of lockdown fatigue accelerated in an alarming stage among university students in Iraq. Hence, students need to build their emotional resilience and learn how to navigate surviving hard times and bounce back after a loss. This could be facilitated by counselling services being availed to educational and social institutions to benefit university students.

Comparison of anterior and posterior trabecular bone microstructure of human mandible using cone-beam CT and micro CT.

BACKGROUND: The aim of this study was to compare the trabecular bone microstructures of anterior and posterior edentulous regions of human mandible using cone-beam computed tomography (CBCT) and micro computed tomography (µCT). METHODS: Twenty volumes of interests consisting of six anterior and fourteen posterior edentulous regions were obtained from human mandibular cadavers. A CBCT system with a resolution of 80 µm (3D Accuitomo 170, J. Morita, Kyoto, Japan) and a µCT system with a resolution of 35 µm (SkyScan 1173, Kontich, Belgium) were used to scan the mandibles. Three structural parameters namely, trabecular number (Tb.N), trabecular thickness (Tb.Th), and trabecular separation (Tb.Sp) were analysed using CTAn software (v 1.11, SkyScan, Kontich, Belgium). For each system, the measurements obtained from anterior and posterior regions were tested using independent sample t-test. Subsequently, all measurements between systems were tested using paired t-test. RESULTS: In CBCT, all parameters of the anterior and posterior mandible showed no significant differences (p > 0.05). However, µCT showed a significant different of Tb.Th (p = 0.023) between anterior and posterior region. Regardless of regions, the measurements obtained using both imaging systems were significantly different (p ≤ 0.021) for Tb.Th and Tb.N. CONCLUSIONS: The current study demonstrated that only the variation of Tb.Th between anterior and posterior edentulous region of mandible can be detected using µCT. In addition, CBCT is less feasible than µCT in assessing trabecular bone microstructures at both regions.

The accuracy of computer-guided implant surgery with tooth-supported, digitally designed drill guides based on CBCT and intraoral scanning. A prospective cohort study.

OBJECTIVES: The purpose of this prospective cohort study was to evaluate computer-guided implant surgery with tooth-supported drill guides based on CBCT scans and intraoral scanning. MATERIALS AND METHODS: For partially edentulous patients, a prosthetic and surgical planning was completed in the guided surgery software (coDiagnostiX) and drill guides were 3D-printed accordingly. Three months after implant placement, an intraoral scan of the implant's position was used to evaluate the accuracy of placement using the coDiagnostiX treatment evaluation tool. Deviations were reported in degrees and in distance at implant's entry point and apex. Several risk factors, which might influence the accuracy, were evaluated separately: treated jaw, flap design, prior augmentations, amount of unrestored teeth, crowding, location of implants, cortical interference, and implant's length and diameter. RESULTS: A total of 66 patients received 145 Straumann tissue level implants that were eligible for accuracy analysis. The mean angular deviation was 2.72° ± 1.42. The mean three-dimensional deviation at the implant's entry point was 0.75 mm ± 0.34. At implant's apex, the mean was 1.06 mm ± 0.44. The amount of unrestored teeth (p = .002 & p = .003), the implant's location (p < .001), the implant's length (p = .004), and cortical interference (p = .033) had a significant influence on the accuracy of placement. Implant survival was 99.3% (n = 1 failed implant) at 12 and 24 months. CONCLUSIONS: Guided surgery with tooth-supported drill guides made in a digital workflow is a feasible treatment option. However, deviations do occur and the implant's length, location, cortical interference and the amount of unrestored teeth have a significant influence on the accuracy.

NAMPT expression in osteoblasts controls osteoclast recruitment in alveolar bone remodeling.

In bone remodeling, osteoclasts are recruited via increased production of RANKL (receptor activator of nuclear factor-κB ligand) and migrate to the bone surface, aided by matrix metalloproteinases (MMPs). NAMPT (nicotinamide phosphoribosyl transferase), which catalyzes the rate-limiting step in the NAD+ salvage pathway, increases during in vitro osteogenic differentiation and inhibits RANKL-induced osteoclast differentiation. Alveolar bone loss, due to disturbance of the remodeling process, is a major feature of periodontitis. Thus, we investigated the role of NAMPT in a synchronized alveolar bone remodeling rat model. NAMPT expression increased in osteogenic cells during the remodeling activation phase, in parallel with RANKL and MMP-2 expression. Inhibition of NAMPT activity, by systemic delivery of its selective inhibitor FK866, decreased the recruitment of osteoclasts, but not their activity. In vitro, NAMPT mRNA, and protein expression also increased during osteoblast differentiation in primary calvarial osteoblast cultures. Recombinant NAMPT and NMN, its direct metabolite, dose-dependently increased bone marker expression, including that of sialoprotein (BSP) and osteocalcin (OC), whereas their expression was inhibited by FK866 treatment. Recombinant NAMPT did not regulate MMP-2, -9, MMP-13, or RANKL/OPG mRNA expression in osteoblasts. Our data suggest that de novo NAMPT synthesis in osteoblasts controls cell differentiation through osteoclast recruitment during the activation of bone remodeling.

Reconstructive aspects: Summary and consensus statements of group 3. The 5th EAO Consensus Conference 2018.

OBJECTIVES: The tasks of this working group were to evaluate the existing evidence on the efficiency and efficacy of the digital and conventional workflows for the fabrication of fixed implant reconstructions, to assess the performance of all-ceramic fixed implant reconstructions and, finally, to evaluate the outcomes of internally and externally connected implant abutments and reconstructions. METHODS: Four reviews were available analyzing the current literature on the respective topics. One review dealt with the efficiency and efficacy of digital and conventional fabrication workflows. Two reviews analyzed the outcomes of all-ceramic fixed implant reconstructions, one focusing on single-implant reconstructions and the other evaluating multiple-unit implant fixed dental prostheses (FDPs). The fourth review evaluated the clinical outcome on external, respectively, internal implant-abutment connections. These reviews were the basis for the discussions within the group and at the plenary sessions. RESULTS: The present consensus report gives the consensus statements, the clinical recommendations, and the implications for future research as discussed and approved by the plenum of the consensus conference. The four manuscripts by Mühlemann et al., Rabel et al., Pieralli et al., and Pjetursson et al. are published as part of the journal supplement of the present EAO consensus conference.

Cone beam computed tomography in implant dentistry: recommendations for clinical use.

BACKGROUND: In implant dentistry, three-dimensional (3D) imaging can be realised by dental cone beam computed tomography (CBCT), offering volumetric data on jaw bones and teeth with relatively low radiation doses and costs. The latter may explain why the market has been steadily growing since the first dental CBCT system appeared two decades ago. More than 85 different CBCT devices are currently available and this exponential growth has created a gap between scientific evidence and existing CBCT machines. Indeed, research for one CBCT machine cannot be automatically applied to other systems. METHODS: Supported by a narrative review, recommendations for justified and optimized CBCT imaging in oral implant dentistry are provided. RESULTS: The huge range in dose and diagnostic image quality requires further optimization and justification prior to clinical use. Yet, indications in implant dentistry may go beyond diagnostics. In fact, the inherent 3D datasets may further allow surgical planning and transfer to surgery via 3D printing or navigation. Nonetheless, effective radiation doses of distinct dental CBCT machines and protocols may largely vary with equivalent doses ranging between 2 to 200 panoramic radiographs, even for similar indications. Likewise, such variation is also noticed for diagnostic image quality, which reveals a massive variability amongst CBCT technologies and exposure protocols. For anatomical model making, the so-called segmentation accuracy may reach up to 200 µm, but considering wide variations in machine performance, larger inaccuracies may apply. This also holds true for linear measures, with accuracies of 200 µm being feasible, while sometimes fivefold inaccuracy levels may be reached. Diagnostic image quality may also be dramatically hampered by patient factors, such as motion and metal artefacts. Apart from radiodiagnostic possibilities, CBCT may offer a huge therapeutic potential, related to surgical guides and further prosthetic rehabilitation. Those additional opportunities may surely clarify part of the success of using CBCT for presurgical implant planning and its transfer to surgery and prosthetic solutions. CONCLUSIONS: Hence, dental CBCT could be justified for presurgical diagnosis, preoperative planning and peroperative transfer for oral implant rehabilitation, whilst striving for optimisation of CBCT based machine-dependent, patient-specific and indication-oriented variables.

A novel approach for custom three-dimensional printing of a zirconia root analogue implant by digital light processing.

OBJECTIVES: This study aimed to explore the feasibility of fabrication of three-dimensional (3D)-printed zirconia root analogue implant (RAI) through digital light processing (DLP) technology. MATERIAL AND METHODS: One partially edentulous mandibular human cadaver was scanned with a cone-beam computed tomography (CBCT) system. The scan volumes and data sets were used to create computer-aided design (CAD) model of the RAI. A high-end DLP 3D printing technology was used to fabricate the RAI from the CAD model. Within this approach, solid 3D objects are built using a DLP projector to translate voxel data so it is reproduced in liquid photopolymer dispersed with a commercial ceramic, thereby light polymerizing the resin to solid. Optical scanning technology was used to measure the tooth and 3D-printed RAI. To validate the accuracy of the printed zirconia RAI, the optical surface model of the original tooth and CAD model were superimposed. RESULTS: The differences between the optical scans of the RAI and original tooth are most noticeable towards the apical foramen, showing a disparity for the RAI with a maximum deviation of 0.86 mm. When setting a maximum threshold of 0.5 mm for the 3D-printed RAI surface to be deviating from the original tooth model and CAD model, measurements show 1.55% and 4.86% of the surface areas are exceeding the threshold distance, respectively. CONCLUSION: With the use of currently available technology, it is well feasible to 3D print in zirconia a custom RAI.

Computer-assisted template-guided custom-designed 3D-printed implant placement with custom-designed 3D-printed surgical tooling: an in-vitro proof of a novel concept.

OBJECTIVES: The aim of this study was to introduce a new concept for computer-assisted template-guided placement of a custom 3D-designed/3D-printed implant with congruent custom 3D-designed/3D-printed surgical tooling and to test the feasibility and accuracy of this method in-vitro. MATERIALS AND METHODS: One partially edentulous human mandibular cadaver was scanned with a cone-beam computed tomography (CBCT) system and intra-oral scan system. The 3D data of this cadaver were imported in specialized software and used to analyse the region of a missing tooth. Based on the functional and anatomical parameters, an individual implant with congruent surgical tooling and surgical guided template was designed and 3D-printed. The guided osteotomy was performed, and the custom implant inserted. To evaluate the planned implant position in comparison with the placed implant position, the mandible with implant was scanned again with the CBCT system and software matching was applied to measure the accuracy of the procedure. RESULTS: The angular deflection with the planned implant position was 0.40°. When comparing the 3D positions of the shoulder, there is a deviation of 0.72 mm resulting in an apical deviation of 0.72 mm. CONCLUSION: With the use of currently available technology, it is very well feasible to create in a virtual simulation a custom implant with congruent custom surgical tooling and to transfer this to a clinical setting. However, further research on multiple levels is needed to explore this novel approach.

Registration of cone beam computed tomography data and intraoral surface scans - A prerequisite for guided implant surgery with CAD/CAM drilling guides.

OBJECTIVES: Guided implant surgery (GIS) is performed with drilling guides that are produced on the virtual tooth model using CAD/CAM technology. The prerequisite for this workflow is the alignment of patients cone beam computed tomography CBCT and surface scan (registration). Dental restorations may cause deteriorating imaging artifacts in CBCT data, which in turn can have an impact on the registration process. The influence of the user and the preprocessing of data and of image artifacts on the registration accuracy were examined. MATERIAL AND METHODS: CBCT data and intraoral surface scans of 36 patients were used for virtual implant planning in coDiagnostiX (Dentalwings, Montreal, Canada). CBCT data were reconstructed to a three-dimensional anatomical model with the default settings provided by the software and also manually by four different examiners. Subsequently, the CBCT and intraoral surface models were registered by each examiner with the help of anatomical landmarks. Patients' data were subdivided into four groups (A-D) according to the number of metallic restorations: A = 0-2 restorations, B = 3-5 restorations, C = 6-8 restorations and D > 8 restorations. After registration, the distances between CBCT and dental surface models were measured. Linear regression models were used to assess the influence of the segmentation, the examiner and to the number of restorations (P < 0.05). RESULTS: The deviations between surface scan and CBCT models accounted to 0.54 mm (mean). The mean deviations were 0.69 mm (max. 24.8 mm) and 0.4 mm (max. 9.1 mm) for default and manual segmentation, respectively. Mean deviations of 0.36 mm (Group A), 0.43 mm (Group B), 0.67 mm (Group C) and 1.01 mm (Group D) were recorded. The segmentation (P = 0.000), the user (P = 0.0052) and the number of restorations (P = 0.0337) had a significant influence on the registration accuracy. CONCLUSIONS: The deviation between CBCT and surface scan model resulting from inaccurate registration is transferred to the surgical field and results in a deviation between the planned and actual implant position. The registration accuracy in commercial virtual implant planning software is significantly influenced by the preprocessing of imported data, by the user and by the number of restorations resulting in clinically non-acceptable deviations encoded in drilling guides.

A digital approach integrating facial scanning in a CAD-CAM workflow for complete-mouth implant-supported rehabilitation of patients with edentulism: A pilot clinical study.

STATEMENT OF PROBLEM: Complete-mouth implant-supported rehabilitations are challenging because of the multiple surgical and prosthetic steps involved in clinical evaluations to assure passive prosthesis fit and optimal esthetic and functional outcomes. As a result, these rehabilitations are usually associated with substantial clinical time, patient discomfort, and high treatment cost. PURPOSE: The purpose of this pilot clinical study was to evaluate a novel digital approach integrating digital intraoral dental and extraoral facial scanning information to design and mill a computer-aided design and computer-aided manufacturing (CAD-CAM) implant-retained prosthesis for patients with complete edentulism. MATERIAL AND METHODS: Ten patients in need of complete-mouth rehabilitation were included in this pilot study. Digital intraoral records were obtained through optical scanning the duplicate interim prosthesis using a laboratory scanner, while digital extraoral records were obtained through facial scanning using an in-office scanner. The scanned impressions and occlusal records were used to create a virtual tooth arrangement, which was matched to the patient's 3-dimensional face scan to create a virtual clinical evaluation phase. After applying the necessary adjustments, the virtual arrangement was submitted to a CAM procedure where a 5-axis industrial milling machine was used to fabricate an interim prosthesis. RESULTS: Digital intraoral and extraoral records were integrated and used to fabricate CAD-CAM milled interim prostheses, which were inserted and assessed for clinical fit, occlusion/articulation, and esthetics. The prostheses remained in function for at least 6 months with no notable technical or biological complications except for 1 prosthesis that fractured. CONCLUSIONS: A novel digital workflow incorporating facial scanning in a CAD-CAM workflow was used to fully digitally design and mill 10 implant-retained interim prostheses. More research is required to further develop and assess the accuracy and applicability of this approach.

An In Vitro Study of Factors Influencing the Performance of Digital Intraoral Impressions Operating on Active Wavefront Sampling Technology with Multiple Implants in the Edentulous Maxilla.

PURPOSE: To evaluate the performance (accuracy and repeatability) and the factors affecting the clinical performance of a recently released intraoral scanner based on active wavefront sampling technology. MATERIALS AND METHODS: A single resin model of an edentulous maxilla fitted with six implants inserted at various depths and angulations was measured with a coordinated measuring machine (CMM) at 3 to 5 µm, and this acted as the "true," or reference, values of the study. Six corresponding cylindrical PEEK scanbodies were then mounted onto the implants, and four calibrated observers independently repeated the digital intraoral scan five times with a True Definition (TrueDef) scanner. Using implant position #15 as a reference, five linear and angular measurements were compared with the reference values (CMM), and the data were analyzed via one-way ANOVA and two-sample t-test. RESULTS: Mean linear and angular deviations for the TrueDef from CMM measurements were from 5.38 ± 12.61 µm to -26.97 ± 50.56 µm and from 0.16º ± 0.04º to -0.43º ± 0.1º, respectively. Experienced observers performed significantly better than inexperienced ones (p = 0.006), and scan distance (quadrant) significantly affected scanning accuracy (p = 0.003). Visible length of the scanbody affected measurement accuracy (p = 0.0001), while implant angulation did not (p = 0.757). CONCLUSIONS: The TrueDef scanner provides measurements within clinically accepted limits. Yet scanbody visibility, observer experience, and scan length remain relevant factors affecting accuracy.

Odontogenic myxoma: a clinicopathological study in a South African population.

BACKGROUND: Odontogenic myxoma is a benign, locally aggressive neoplasm of the jaws. Prevalence rates range between 0.5% and 17.7% of odontogenic tumours. There are few reports in the literature on this lesion in African populations, and therefore, this study aimed to report on odontogenic myxoma in a South African population over a 40-year period. METHODS: The clinical records and orthopantomograms of 29 histopathologically diagnosed odontogenic myxoma were retrospectively analysed. Details of age, gender, ethnic origin and clinical, histological as well as radiological features were recorded. RESULTS: The ages of patients ranged from 7 to 44 years with a mean of 21.3 years. The male-to-female ratio was 1:2.6 with the majority of patients being of mixed race and Africans. Clinically, 31% complained of pain while 58.6% had a history of swelling. The majority of odongenic myxomas (62.1%) were located in the mandible with the posterior region being most commonly affected. Multilocular lesions (69.2%) were more common and were significantly larger than unilocular lesions (P < 0.05). The outline of these tumours was mostly well-defined (84.6%) with different degrees of cortication. Only one tumour caused tooth resorption, while 20 cases (76.9%) caused tooth displacement. Six tumours expanded into the maxillary sinus, and 14 tumours caused expansion of the mandible. CONCLUSIONS: Odontogenic myxomas have variable clinical, radiological and histological features. Most of these features in this population were similar to other populations. It is mandatory to use conventional radiographs along with histopathological examination to aid in arriving at an accurate diagnosis.

Clinical evaluation comparing the fit of all-ceramic crowns obtained from silicone and digital intraoral impressions.

OBJECTIVES: The aim of this study is to compare the fit of all-ceramic crowns fabricated from conventional silicone impressions with the fit of all-ceramic crowns fabricated from intraoral digital impressions. METHODS: Twenty patients with 26 posterior teeth with a prosthetic demand were selected for the study. Two crowns (Straumann-Zerion) were made for each preparation. One crown was fabricated from an intraoral digital impression system (IDI group; Cadent-iTero), and the other crown was fabricated from a conventional one-step silicone impression (CI group; Express Penta Putty and Body Light). To replicate the interface between the crown and the preparation, each crown was cemented on its corresponding clinical preparation with ultra-flow silicone (Express Ultra Light Body). Each crown was embedded in resin to stabilize the registered interface, cut in 2-mm-thick slices in a buco-lingual orientation. Internal misfit was measured in microns using stereomicroscopy with a magnification of ×40. Measurements were taken at different landmarks: margin, chamfer angle, axial, crest, and occlusal fosse. After checking for normality, data was analyzed using paired Student's t test (α = 0.05). RESULTS: Fit values were significantly affected by the impression technique (p = 0.000). Mean internal misfit and mean marginal misfit were 111.40 µm (SD = 54.04)/80.29 µm (SD = 26.24) for the crowns of the IDI group and 173.00 µm (SD = 92.65)/133.51 µm (SD = 48.78) for the CI group. CONCLUSION: All-ceramic crowns fabricated from intraoral digital impressions with parallel confocal technology demonstrated a clinically acceptable internal and marginal fit as conventional impression. CLINICAL SIGNIFICANCE: Intraoral digital impressions as initial step to the digital workflow could further improve the marginal adaptation of all ceramic single crowns. TRIAL REGISTRATION: http://www.isrctn.com/ISRCTN16111844.

Comparing 2 Cone Beam Computed Tomography Devices for the Transfer Accuracy of a Laboratory-Based Guided Surgery System In Vitro.

PURPOSE: Using surgical templates for guided placement increases accuracy and decreases patient's discomfort, therefore optimizing the functional, aesthetic, and prosthetic outcomes. Cone Beam computed tomography (CBCT) devices differ in their resolution and geometric accuracies and have been recently demonstrated to influence the measurements of guided surgery. The study aim is to investigate the potential influence of CBCT device selection on the transfer accuracy of guided surgery. MATERIALS AND METHODS: Thirty-two Straumann implants placed in 8 acrylic models were implanted using digital planning and guided surgery. Preoperative and postoperative CBCT scans of 2 different devices (AccuiTomo 170, Morita and NewTom 5G; QR Verona) were made. Post-op implant position was compared with the digital planning and linear and angular deviations at the implant tip and base were compared between both devices. RESULTS: Mean linear and angular deviations were (0.53 mm/0.96 degree) and (0.66 mm/1.04 degree) for the Newtom and AccuiTomo, respectively. The differences were statistically insignificant (P = 0.615). CONCLUSION: In our sample, CBCT device selection did not influence the transfer accuracy of guided surgery. More research is needed to evaluate the accuracy of other systems.

Bone quality evaluation at dental implant site using multislice CT, micro-CT, and cone beam CT.

OBJECTIVES: The first purpose of this study was to analyze the correlation between bone volume fraction (BV/TV) and calibrated radiographic bone density Hounsfield units (HU) in human jaws, derived from micro-CT and multislice computed tomography (MSCT), respectively. The second aim was to assess the accuracy of cone beam computed tomography (CBCT) in evaluating trabecular bone density and microstructure using MSCT and micro-CT, respectively, as reference gold standards. MATERIAL AND METHODS: Twenty partially edentulous human mandibular cadavers were scanned by three types of CT modalities: MSCT (Philips, Best, the Netherlands), CBCT (3D Accuitomo 170, J Morita, Kyoto, Japan), and micro-CT (SkyScan 1173, Kontich, Belgium). Image analysis was performed using Amira (v4.1, Visage Imaging Inc., Carlsbad, CA, USA), 3Diagnosis (v5.3.1, 3diemme, Cantu, Italy), Geomagic (studio(®) 2012, Morrisville, NC, USA), and CTAn (v1.11, SkyScan). MSCT, CBCT, and micro-CT scans of each mandible were matched to select the exact region of interest (ROI). MSCT HU, micro-CT BV/TV, and CBCT gray value and bone volume fraction of each ROI were derived. Statistical analysis was performed to assess the correlations between corresponding measurement parameters. RESULTS: Strong correlations were observed between CBCT and MSCT density (r = 0.89) and between CBCT and micro-CT BV/TV measurements (r = 0.82). Excellent correlation was observed between MSCT HU and micro-CT BV/TV (r = 0.91). However, significant differences were found between all comparisons pairs (P < 0.001) except for mean measurement between CBCT BV/TV and micro-CT BV/TV (P = 0.147). CONCLUSIONS: An excellent correlation exists between bone volume fraction and bone density as assessed on micro-CT and MSCT, respectively. This suggests that bone density measurements could be used to estimate bone microstructural parameters. A strong correlation also was found between CBCT gray values and BV/TV and their gold standards, suggesting the potential of this modality in bone quality assessment at implant site.

Accuracy of preemptively constructed, cone beam CT-, and CAD/CAM technology-based, individual Root Analogue Implant technique: an in vitro pilot investigation.

OBJECTIVES: The aim of this in vitro pilot investigation is to assess the accuracy of the preemptive individually fabricated root analogue implant (RAI) based on three-dimensional (3D) root surface models obtained from a cone beam computed tomography (CBCT) scan, computer-aided designing (CAD), and computer-aided manufacturing (CAM) technology and to measure the discrepancy in congruence with the alveolar socket subsequent to placement of the RAI. MATERIALS AND METHODS: Eleven single-rooted teeth from nine human cadaver mandibles were scanned with the 3D Accuitomo 170 CBCT system. The 3D surface reconstructions of the teeth acquired from the CBCT scans were used as input for fabrication of the RAIs in titanium using rapid manufacturing technology. The teeth were then carefully extracted. The teeth and RAIs were consequently optically scanned. The mandibles with the empty extraction sockets were scanned with CBCT using identical settings to the first scan. Finally, the preemptively made RAIs were implanted into their respective sockets, and the mandibles were again scanned with CBCT using the same scan settings as previous scans. All 3D surface reconstructions (CBCT 3D surface models and optical scan 3D models) were saved for further analysis. 3D models of original teeth and optical scans of the RAIs were superimposed onto each other; differences were quantified as root mean square (RMS) and Hausdorff surface distance. To obtain an estimate of the fit (congruence) of the RAIs in their respective sockets, the volumetric data sets of the sockets were compared with those of the root part of RAIs congruent with the sockets. RESULTS: Superimposed surfaces of the RAIs and the original tooth reveal discrepancy for RMS, volumetric geometry, and surface area varying from 0.08 mm to 0.35 mm, 0.1% to 7.9%, and 1.1% to 3.8%, respectively. Comparing volume differences of the alveolus with the socket corresponding part of the RAI resulted in every case the volume of the socket being greater than the root part of the RAI ranging from 0.6% to 5.9% volume difference. CONCLUSION: The preemptive CAD/CAM-based RAI technique might offer promising features for immediate implant placement. However, due to the lack of prospective clinical data, further research is needed to fine-tune and evaluate this technique.

Accuracy of trabecular bone microstructural measurement at planned dental implant sites using cone-beam CT datasets.

OBJECTIVE: Cone-beam CT (CBCT) images are infrequently utilized for trabecular bone microstructural measurement due to the system's limited resolution. The aim of this study was to determine the accuracy of CBCT for measuring trabecular bone microstructure in comparison with micro CT (µCT). MATERIALS AND METHODS: Twenty-four human mandibular cadavers were scanned using a CBCT system (80 µm) and a µCT system (35 µm). Three bone microstructural parameters trabecular number (Tb.N), thickness (Tb.Th) and separation (Tb.Sp) were assessed using CTAn imaging software. RESULTS: Intraclass correlation coefficients (ICC) showed a high intra-observer reliability (≥ 0.996) in all parameters for both systems. The Pearson correlation coefficients between the measurements of the two systems were for Tb.Th 0.82, for Tb.Sp 0.94 and for Tb.N 0.85 (all P's<0.001). The Bland and Altman plots showed strongest agreement in Tb.N (-0.37 µm) followed by Tb.Th (1.6 µm) and Tb.Sp (8.8 µm). CONCLUSIONS: Cone-beam CT datasets can be used to evaluate trabecular bone microstructure at dental implant sites. The accuracy for measuring Tb.N was the best followed by Tb.Th and Tb.Sp.

A case report of coexisting breast cancer with peritoneal, cutaneous tuberculosis, and potential Pott's disease: therapeutic and diagnostic challenges.

Introduction: Breast cancer affects one in eight women during their lifetime; it may coincide with other diseases due to its high prevalence. Different pathologies that occur simultaneously with breast cancer, or later during its course, lead to multiple interactions with cancer and have a significant impact on its management. Presentation of case: A 58-year-old Syrian female was admitted to our hospital for compliant of abdominal distension. Following complete examination, obtained biopsies confirmed the diagnosis of peritoneal tuberculosis. At a subsequent time, she suffered back pain and the computed tomography showed vertebral lesion with breast mass that was diagnosed as invasive lobular carcinoma (ILC) of the left breast. Vertebral lesion that appeared on radiologic assessment was diagnosed as cancer metastasis. However, the interaction of this metastasis with the proposed management diverted the attention towards its non-cancerous entity. Five months after completing the chemotherapy, biopsies revealed the recurrence of triple-negative (ER-, PR-, HER2- neu-) ILC of the breast. Ultimately, the patient was followed up for an overall duration of 4 years. Discussion: Latent tuberculosis infections may be activated by chemotherapy regimens that suppress immunity. Therefore, initial management of tuberculous infection is preferred when it coexists with cancer. Conclusion: Breast cancer is common and may co-present with other diseases, which, in some cases, produce mimicking lesions that alter its diagnosis. Pott's disease, albeit a rare entity, has shown a resurgence in developed countries and should be considered in the differential diagnosis of vertebral lesions in patients with breast cancer.