RESUMO
Cover crops play an increasingly important role in improving soil quality, reducing agricultural inputs and improving environmental sustainability. The main objectives of this critical global review and systematic analysis were to assess cover crop practices in the context of their impacts on nitrogen leaching, net greenhouse gas balances (NGHGB) and crop productivity. Only studies that investigated the impacts of cover crops and measured one or a combination of nitrogen leaching, soil organic carbon (SOC), nitrous oxide (N2 O), grain yield and nitrogen in grain of primary crop, and had a control treatment were included in the analysis. Long-term studies were uncommon, with most data coming from studies lasting 2-3 years. The literature search resulted in 106 studies carried out at 372 sites and covering different countries, climatic zones and management. Our analysis demonstrates that cover crops significantly (p < 0.001) decreased N leaching and significantly (p < 0.001) increased SOC sequestration without having significant (p > 0.05) effects on direct N2 O emissions. Cover crops could mitigate the NGHGB by 2.06 ± 2.10 Mg CO2 -eq ha-1 year-1 . One of the potential disadvantages of cover crops identified was the reduction in grain yield of the primary crop by ≈4%, compared to the control treatment. This drawback could be avoided by selecting mixed cover crops with a range of legumes and non-legumes, which increased the yield by ≈13%. These advantages of cover crops justify their widespread adoption. However, management practices in relation to cover crops will need to be adapted to specific soil, management and regional climatic conditions.
Assuntos
Gases de Efeito Estufa , Agricultura , Produção Agrícola , Produtos Agrícolas , Nitrogênio , SoloRESUMO
BACKGROUND AND AIMS: Germplasm with diverse, agronomically relevant traits forms the foundation of a successful plant breeding programme. Since 1993, the United Nations has been advocating the implementation of the Convention on Biological Diversity (CBD) and the subsequent 2002 Bonn Guidelines as international best practice on germplasm collection and use. In 2006, a European team made an expedition to Asia to collect wild germplasm of Miscanthus, a C4 perennial rhizomatous grass, for breeding an environmentally adaptable, resilient and high-yielding bioenergy crop. We outline general aspects of germplasm collection, conservation, breeding and biomass production evaluation while following the CBD's guidelines, respecting biodiversity and conservation needs, and the ethical use of genetic resources. METHODS: Effective protocols, quarantine, methods for collecting seed and rhizomes, and a genebank for conservation were established. Versatile informatics and database architecture were used to assist in selection, flowering synchronization, crossing, evaluation, phenotyping and data integration. Approaches were formulated to comply with the CBD guidelines. KEY RESULTS: A total of 303 accessions of M. sinensis, M. sacchariflorus and M. floridulus were collected from 158 geographically and environmentally diverse locations. These species were shown to accumulate different amounts of aerial biomass due to combinations of stem count, height and thickness. Progeny from one interspecies cross accumulated more biomass in early trials and has shown double the yield performance in years 3-4 compared with the existing commercial cultivar M. × giganteus. An example of an F1 hybrid has already demonstrated the long-term potential of exploiting this collection for a breeding programme. CONCLUSIONS: By conforming to the CBD principles, the authors' international collaboration provides a practical example of implementing the CBD. The collection widened the genetic diversity of Miscanthus available to allow for breeding of novel hybrids that exhibit more diverse traits to increase yield and resilience for growth on marginal land and in climate-challenged environments.
Assuntos
Biodiversidade , Poaceae , Ásia , Europa (Continente) , Nações UnidasRESUMO
Peat soils represent an important global carbon (C) sink, but can also provide a highly fertile medium for growing horticultural crops. Sustainable crop production on peat soils involves a trade-off between ensuring food security and mitigating typically high greenhouse gas (GHG) emissions and rates of soil C loss. An alternative approach to resource intensive field-based monitoring of GHG fluxes for all potential management scenarios is to use a process-based model driven by existing field data to estimate emissions. The aim of this study was to evaluate the suitability of the Denitrification-Decomposition (DNDC) model for estimating emissions of CO2, N2O and CH4 from horticultural peat soils. The model was parameterised using climatic, soil, and crop management data from two intensively cultivated sites on soils of contrasting soil organic matter (SOM) contents (â¼35% and â¼70% SOM content). Simulated emissions of CO2, N2O and CH4, and simulated soil physical and crop output values, were compared to actual GHG, soil and crop measurements. Model performance was assessed using baseline parameterisation (i.e. model defaults), then calibrated using pre-simulation and sensitivity analysis processes. Under baseline parameterisation conditions, DNDC proved poor at predicting GHG emissions and soil/crop variables. Calibration and validation improved DNDC performance in estimating the annual magnitude of emissions, but model refinement is still required for reproducing seasonal GHG patterns in particular. Key constraints on model functioning appear to be its ability to reliably model soil moisture and some aspects of C and nitrogen dynamics, as well as the quality of input data relating to water table dynamics. In conclusion, our results suggest that the DNDC (v. 9.5) model cannot accurately reproduce or be used to replace actual field measurements for estimation of GHG emission factors under different management scenarios for horticultural peat soils, but may be able to do so with further modification.
Assuntos
Gases de Efeito Estufa , Dióxido de Carbono , Desnitrificação , Metano , Nitrogênio , Óxido Nitroso , SoloRESUMO
Mercury is a naturally occurring heavy metal that has also been associated with anthropogenic sources such as cement production or hydrocarbon extraction. Mercury is a contaminant of concern as it can have a significant negative impact on organismal health when ingested. In aquatic environments, it bioaccumulates up the foodweb, where it then has the potential to impact human health. With the offshore hydrocarbon platforms in the North Sea nearing decommissioning, they must be assessed as a potential source for the environmental release of mercury. International treaties govern the handling of materials placed in the ocean. Studies have assessed the ecologic and economic benefits of (partial) in situ abandonment of the infrastructure as artificial reefs. This can be applied to pipelines after substantial cleaning to remove mercury accumulation from the inner surface. This work outlines the application of an approach to modelling marine mercury bioaccumulation for decommissioning scenarios in the North Sea. Here, in situ decommissioning of cleaned pipelines was unlikely to have a negative impact on the North Sea food web or human health. However, significant knowledge gaps have been determined, which must be addressed before all negative impacts on ecosystems and organismal health can be excluded.
RESUMO
The North Sea is an ecologically rich habitat for marine wildlife which has also been impacted by industrial developments and anthropogenic emissions of contaminants such as mercury. Marine mammals are particularly susceptible to mercury exposure, due to their trophic position, long lifespan, and dependence on (increasingly contaminated) aquatic prey species. To mitigate impact, marine mammals can detoxify methylmercury by binding it to selenium-containing biomolecules, creating insoluble mercury selenide granules. Here, liver, kidney, muscle, and brain samples from an adult male bottlenose dolphin (Tursiops truncatus) with known elevated mercury concentrations were analysed through scanning electron microscopy (SEM). Tiemannite (HgSe) deposits were identified in all organs, ranging from 400 nm to 5 µm in diameter, with particle size being organ-dependent. Although reported in other studies, this is the first time that the three-dimensional nature of tiemannite is captured in marine mammal tissue.
Assuntos
Golfinho Nariz-de-Garrafa , Mercúrio , Compostos de Metilmercúrio , Poluentes Químicos da Água , Animais , Masculino , Mercúrio/análise , Poluentes Químicos da Água/análise , Compostos de Metilmercúrio/análise , Golfinho Nariz-de-Garrafa/metabolismo , Fígado/metabolismoRESUMO
With increasing annual chemical development and production, safety testing demands and requirements have also increased. In addition to traditional animal testing, quantitative structure-activity relationship (QSAR) modelling can be used to predict the biological effect of a chemical structure, based on the analysis of quantitative characteristics of structure features. Whilst suitable for e.g., pharmaceuticals, other compounds can be more challenging to model. The naturally occurring heavy metal mercury speciates in the environment, with some toxic species accumulating in aquatic organisms. Although this is well known, only little data is available from (eco)toxicological studies, none of which account for this speciation behaviour. The present work highlights the current toxicity data for mercury in aquatic animals and gaps in our understanding and data for future QSAR modelling. All publicly available ecotoxicology data was obtained from databases and literature. Only few studies could be determined that assessed mercury toxicity in aquatic species. Of these, likely speciation products were determined using PHREEQc. This highlighted that the mercury exposure species was not always the predominant species in the medium. Finally, the descriptors for the modelled species were obtained from ChemDes, highlighting the limited availability of such details. Additional testing is required, accounting for speciation and biological interactions, to successfully determine the toxicity profile of different mercury species in aquatic environments. In the present work, insufficient mercury-species specific data was obtained, to conduct QSAR modelling successfully. This highlights a significant lack of data, for a heavy metal with potentially fatal repercussions.
Assuntos
Mercúrio , Metais Pesados , Poluentes Químicos da Água , Animais , Mercúrio/toxicidade , Relação Quantitativa Estrutura-Atividade , Metais Pesados/toxicidade , Poluentes Químicos da Água/toxicidadeRESUMO
This modelling study uses the ERICA Tool and Bateman's equation to derive sediment threshold values for radiation protection of the marine environment relevant to NORM-contaminated products (radium-contaminated scales, 210Pb films and 210Po films) found in subsea oil and gas infrastructure. Threshold values are calculated as the activity concentration of the NORM-contaminated products' head of chain radionuclide (i.e., 226Ra + 228Ra, 210Pb, or 210Po) that will increase radiation dose rates in sediments by 10 µGy/h to the most exposed organism at a given release time. The minimum threshold value (corresponding to peak radiation dose rates from the ingrowth of progeny) were for radium-contaminated scales, 0.009 Bq/g of 226Ra, 0.029 Bq/g of 228Ra (in the absence of 226Ra) or 0.14 Bq/g of 228Ra (in the presence of 226Ra), followed by 0.015 Bq/g for 210Pb films, and 1.6 Bq/g for 210Po films. These may be used as default threshold values. Added activity concentrations of the NORM-contaminated products to marine sediments below these threshold values implies a low radiological risk to organisms while exceedances imply that further investigation is necessary. Using contaminated product specific parameterisations, such as Kd values derived for Ra from a BaSO4 matrix in seawater, could greatly affect threshold values. Strong consideration should be given to deriving such data as part of specific radiological risk assessments for these products.
Assuntos
Monitoramento de Radiação , Rádio (Elemento) , Ecossistema , Rádio (Elemento)/análise , ChumboRESUMO
Subsea pipelines carrying well fluids from hydrocarbon fields accumulate mercury. If the pipelines (after cleaning and flushing) are abandoned in situ, their degradation may release residual mercury into the environment. To justify pipeline abandonment, decommissioning plans include environmental risk assessments to determine the potential risk of environmental mercury. These risks are informed by environmental quality guideline values (EQGVs) governing concentrations in sediment or water above which mercury toxicity may occur. However, these guidelines may not consider e.g., the bioaccumulation potential of methylated mercury. Therefore, EQGVs may not protect humans from exposure if applied as the sole basis for risk assessments. This paper outlines a process to assess the EQGVs' protectiveness from mercury bioaccumulation, providing preliminary insights to questions including how to (1) determine pipeline threshold concentrations, (2) model marine mercury bioaccumulation, and (3) determine exceedance of the methylmercury tolerable weekly intake (TWI) for humans. The approach is demonstrated with a generic example using simplifications to describe mercury behaviour and a model food web. In this example, release scenarios equivalent to the EQGVs resulted in increased marine organism mercury tissue concentrations by 0-33 %, with human dietary methylmercury intake increasing 0-21 %. This suggests that existing guidelines may not be protective of biomagnification in all circumstances. The outlined approach could inform environmental risk assessments for asset-specific release scenarios but must be parameterised to reflect local environmental conditions when tailored to local factors.
Assuntos
Mercúrio , Compostos de Metilmercúrio , Poluentes Químicos da Água , Humanos , Animais , Compostos de Metilmercúrio/metabolismo , Mercúrio/análise , Cadeia Alimentar , Bioacumulação , Organismos Aquáticos/metabolismo , Monitoramento Ambiental/métodos , Peixes/metabolismo , Poluentes Químicos da Água/análiseRESUMO
Afforestation and reforestation to meet 'Net Zero' emissions targets are considered a necessary policy by many countries. Their potential benefits are usually assessed through forest carbon and growth models. The implementation of vegetation demography gives scope to represent forest management and other size-dependent processes within land surface models (LSMs). In this paper, we evaluate the impact of including management within an LSM that represents demography, using both in-situ and reanalysis climate drivers at a mature, upland Sitka spruce plantation in Northumberland, UK. We compare historical simulations with fixed and variable CO2 concentrations, and with and without tree thinning implemented. Simulations are evaluated against the observed vegetation structure and carbon fluxes. Including thinning and the impact of increasing CO2 concentration ('CO2 fertilisation') gave more realistic estimates of stand-structure and physical characteristics. Historical CO2 fertilisation had a noticeable effect on the Gross Primary Productivity seasonal-diurnal cycle and contributed to approximately 7% higher stand biomass by 2018. The net effect of both processes resulted in a decrease of tree density and biomass, but an increase in tree height and leaf area index.
Assuntos
Dióxido de Carbono , Picea , Florestas , Árvores , Carbono , Fertilização , DemografiaRESUMO
New biomass crop hybrids for bioeconomic expansion require yield projections to determine their potential for strategic land use planning in the face of global challenges. Our biomass growth simulation incorporates radiation interception and conversion efficiency. Models often use leaf area to predict interception which is demanding to determine accurately, so instead we use low-cost rapid light interception measurements using a simple laboratory-made line ceptometer and relate the dynamics of canopy closure to thermal time, and to measurements of biomass. We apply the model to project the European biomass potentials of new market-ready hybrids for 2020-2030. Field measurements are easier to collect, the calibration is seasonally dynamic and reduces influence of weather variation between field sites. The model obtained is conservative, being calibrated by crops of varying establishment and varying maturity on less productive (marginal) land. This results in conservative projections of miscanthus hybrids for 2020-2030 based on 10% land use conversion of the least (productive) grassland and arable for farm diversification, which show a European potential of 80.7-89.7 Mt year-1 biomass, with potential for 1.2-1.3 EJ year-1 energy and 36.3-40.3 Mt year-1 carbon capture, with seeded Miscanthus sacchariflorus × sinensis displaying highest yield potential. Simulated biomass projections must be viewed in light of the field measurements on less productive land with high soil water deficits. We are attempting to model the results from an ambitious and novel project combining new hybrids across Europe with agronomy which has not been perfected on less productive sites. Nevertheless, at the time of energy sourcing issues, seed-propagated miscanthus hybrids for the upscaled provision of bioenergy offer an alternative source of renewable energy. If European countries provide incentives for growers to invest, seeded hybrids can improve product availability and biomass yields over the current commercial miscanthus variety.
RESUMO
Demand for sustainably produced biomass is expected to increase with the need to provide renewable commodities, improve resource security and reduce greenhouse gas emissions in line with COP26 commitments. Studies have demonstrated additional environmental benefits of using perennial biomass crops (PBCs), when produced appropriately, as a feedstock for the growing bioeconomy, including utilisation for bioenergy (with or without carbon capture and storage). PBCs can potentially contribute to Common Agricultural Policy (CAP) (2023-27) objectives provided they are carefully integrated into farming systems and landscapes. Despite significant research and development (R&D) investment over decades in herbaceous and coppiced woody PBCs, deployment has largely stagnated due to social, economic and policy uncertainties. This paper identifies the challenges in creating policies that are acceptable to all actors. Development will need to be informed by measurement, reporting and verification (MRV) of greenhouse gas emissions reductions and other environmental, economic and social metrics. It discusses interlinked issues that must be considered in the expansion of PBC production: (i) available land; (ii) yield potential; (iii) integration into farming systems; (iv) R&D requirements; (v) utilisation options; and (vi) market systems and the socio-economic environment. It makes policy recommendations that would enable greater PBC deployment: (1) incentivise farmers and land managers through specific policy measures, including carbon pricing, to allocate their less productive and less profitable land for uses which deliver demonstrable greenhouse gas reductions; (2) enable greenhouse gas mitigation markets to develop and offer secure contracts for commercial developers of verifiable low-carbon bioenergy and bioproducts; (3) support innovation in biomass utilisation value chains; and (4) continue long-term, strategic R&D and education for positive environmental, economic and social sustainability impacts.
RESUMO
Switchgrass is a promising energy crop has the potential to mitigate global warming and energy security, improve local ecology and generate profit. Its quantitative traits, such as biomass productivity and environmental adaptability, are determined by genotype-by-environment interaction (GEI) or response of genotypes grown across different target environments. To simulate the yield of switchgrass outside its original habitat, a genotype-specific growth model, SwitchFor that captures GEI was developed by parameterising the MiscanFor model. Input parameters were used to describe genotype-specific characteristics under different soil and climate conditions, which enables the model to predict the yield in a wide range of environmental and climate conditions. The model was validated using global field trail data and applied to estimate the switchgrass yield potentials on the marginal land of the Loess Plateau in China. The results suggest that upland and lowland switchgrass have significant differences in the spatial distribution of the adaptation zone and site-specific biomass yield. The area of the adaption zone of upland switchgrass was 4.5 times of the lowland ecotype's. The yield difference between upland and lowland ecotypes ranges from 0 to 34 Mg ha-1. The weighted average yield of the lowland ecotype (20 Mg ha-1) is significantly higher than the upland type (5 Mg ha-1). The optimal yield map, generated by comparing the yield of upland and lowland ecotypes based on 1 km2 grid locations, illustrates that the total yield potential of the optimal switchgrass is 61.6-106.4 Tg on the marginal land of the Loess Plateau, which is approximately twice that of the individual ecotypes. Compared with the existing models, the accuracy of the yield prediction of switchgrass is significantly improved by using the SwitchFor model. This spatially explicit and cultivar-specific model provides valuable information on land management and crop breeding and a robust and extendable framework for yield mapping of other cultivars.
RESUMO
To achieve net zero greenhouse gas emission by 2050 as set out by the 2019 amendment to the 2008 UK Climate Change Act, a major shift towards renewable energy is needed. This includes the development of new methods along with improving and upscaling existing technologies. One example of new methods in bioenergy is developing new Miscanthus cultivars for electricity generation via thermal power station furnaces. Miscanthus is still relatively new compared with other agriculture practices, so market assessments and improvements are needed to reduce the barriers to entry for prospective growers. This publication provides a profile of UK Miscanthus growers and their businesses, their experiences of benefits and drawbacks of the crop, and what they see as potential barriers to entry for prospective farmers. A survey of current Miscanthus growers in England and Wales was conducted and indicated that most farmers were content with the crop and that its environmental and economic benefits were noted. However, it was evident that with a geographically limited UK market, growers wanted to see a better distribution of biomass processing stations to reduce the ongoing costs of transport. With growing demand for renewables, including bio-energy sources, it was determined important to provide information and support for stable farming operations and to incentivise the adoption of Miscanthus. Such incentives include ongoing development of new cultivars, focussing on traits such as production potential and stressor resilience, and growers indicated preference for an annual planting grant. These developments are predicted to further improve the crop's profit margin, making it a more cost-effective crop for farmers. Sensitively managed Miscanthus also has the potential to contribute to carbon sequestration, soil health, and aspects of farmland biodiversity. Incentivising such management in government land-based environmental schemes would offer additional income streams and help to promote environmental positive crop planting.
RESUMO
Thousands of offshore oil and gas facilities are coming to the end of their life in jurisdictions worldwide and will require decommissioning. In-situ decommissioning, where the subsea components of that infrastructure are left in the marine environment following the end of its productive life, has been proposed as an option that delivers net benefits, including from: ecological benefits from the establishment of artificial reefs, economic benefits from associated fisheries, reduced costs and improved human safety outcomes for operators. However, potential negative impacts, such as the ecological risk of residual contaminants, are not well understood. Naturally occurring radioactive materials (NORM) are a class of contaminants found in some oil and gas infrastructure (e.g. pipelines) and includes radionuclides of uranium, thorium, radium, radon, lead, and polonium. NORM are ubiquitous in oil and gas reservoirs around the world and may form contamination products including scales and sludges in subsea infrastructure due to their chemistries and the physical processes of oil and gas extraction. The risk that NORM from these sources pose to marine ecosystems is not yet understood meaning that decisions made about decommissioning may not deliver the best outcomes for environments. In this review, we consider the life of NORM-contamination products in oil and gas systems, their expected exposure pathways in the marine environment, and possible ecological impacts following release. These are accompanied by the key research priorities that need to better describe risk associated with decommissioning options.
Assuntos
Ecossistema , Monitoramento de Radiação , Pesqueiros , Humanos , Campos de Petróleo e Gás , Medição de RiscoRESUMO
Many oil and gas fields are nearing production cessation and will require decommissioning, with the preferred method being complete infrastructure removal in most jurisdictions. However, decommissioning in situ, leaving some disused components in place, is an option that may be agreed to by the regulators and reservoir titleholders in some circumstances. To understand this option's viability, the environmental impacts and risks of any residual contaminants assessed. Mercury, a contaminant of concern, is naturally present in hydrocarbon reservoirs, may contaminate offshore processing and transmission infrastructure, and can biomagnify in marine ecosystems. Mercury's impact is dependent on its speciation, concentration, and the exposure duration. However, research characterising and quantifying the amount of mercury in offshore infrastructure and the efficacy of decontamination is limited. This review describes the formation of mercury-contaminated products within oil and gas infrastructure, expected exposure pathways after environmental release, possible impacts, and key research gaps regarding the ecological risk of in situ decommissioned contaminated infrastructure. Suggestions are made to overcome these gaps, improving the in situ mercury quantification in infrastructure, understanding environmental controls on, and forecasting of, mercury methylation and bioaccumulation, and the cumulative impacts of multiple stressors within decommissioned infrastructures.
Assuntos
Ecossistema , Mercúrio , Meio Ambiente , Mercúrio/toxicidade , Campos de Petróleo e GásRESUMO
This global systematic analysis and review investigate the impacts of previous land use system, climate zone, forest type and forest age on soil organic carbon (SOC), total nitrogen (TN), total phosphorus (TP) stock, soil bulk density (BD) and pH at soil layers 0-20, 20-60 and 60-100 cm, following afforestation. Data came from 91 publications on SOC, TN and TP stock changes, covering different countries and climate zones. Overall, afforestation significantly increased SOC by 46%, 52% and 20% at 0-20, 20-60 and 60-100 cm depths, respectively. It also significantly increased shallower TN stocks by 28% and 22% at 0-20 and 20-60 cm depths, respectively, but had no overall impacts on TP. Previous land use system had the largest influence on SOC, TN and TP stock changes, with greater accumulations on barren land compared to cropland and grassland. Climate zone influenced SOC, TN and TP stock changes, with greater accumulations for moist cool than other climate zones. Broadleaf forests were better than coniferous forests for increasing SOC, TN and TP stocks of the investigated soil profile (0-100 cm). Afforestation for <20 years accumulated SOC and TN stocks only at the soil surface (0-20 cm), whilst afforestation for >20 years accumulated SOC and TN stocks to 100 cm soil depth. Changes to SOC and TN were positively correlated at depths down to 100 cm under all age groups, demonstrating that an increase TN could offset progressive N limitation, and maintains SOC accumulation as forests age. TP stock decreased significantly in topsoil (0-20 cm) for <20-year-old forest and did not change for >20-year-old forest, suggesting that it may become a limiting factor for carbon sequestration as forests age. Following afforestation, soil BD decreased alongside significant increases in SOC and TN stocks to 100 cm depth, but had no relationship with TP.
RESUMO
Urban rooftop functional design offers a promising option to enable multi-function urban land-use to deliver multiple ecosystem services, e.g., food production by rooftop agriculture and energy supply by installing photovoltaic (PV) panels. To identify the best rooftop utilization strategy considering multiple decision criteria and understand the impact of rooftop solution on the design of urban energy systems, we propose a whole system modeling framework that integrates biogeochemical simulation and multi-objective energy system optimization. We apply the framework to evaluate three rooftop agriculture options, namely, basic rooftop farming, unconditioned greenhouse, and conditioned greenhouse, and one rooftop energy supply option, i.e., PV panels, for an urban energy eco-design case in Shanghai, China. Enabling rooftop agriculture options brings more flexibility to the design and operation of energy systems. PV panels provide cost-optimal solutions, whereas conditioned greenhouse potentially delivers environmentally sustainable land-use by contributing to climate regulation ecosystem services.
RESUMO
Spatially explicit farm-gate production costs and the economic potential of three types of energy crops grown on available marginal land in China for 2017 and 2040 were investigated using a spatial accounting method and construction of cost-supply curves. The average farm-gate cost from all available marginal land was calculated as 32.9 CNY/GJ for Miscanthus Mode, 27.5 CNY/GJ for Switchgrass Mode, 32.4 CNY/GJ for Miscanthus & Switchgrass Mode, and 909 CNY/GJ for Jatropha Mode in 2017. The costs of Miscanthus and switchgrass were predicted to decrease by approximately 11%-15%, whereas the cost of Jatropha was expected to increase by 5% in 2040. The cost of Jatropha varies significantly from 193 to 9,477 CNY/GJ across regions because of the huge differences in yield across regions. The economic potential of the marginal land was calculated as 28.7 EJ/year at a cost of less than 25 CNY/GJ for Miscanthus Mode, 4.0 EJ/year at a cost of less than 30 CNY/GJ for Switchgrass Mode, 29.6 EJ/year at a cost of less than 25 CNY/GJ for Miscanthus & Switchgrass Mode, and 0.1 EJ/year at a cost of less than 500 CNY/GJ for Jatropha Mode in 2017. It is not feasible to develop Jatropha production on marginal land based on existing technologies, given its high production costs. Therefore, the Miscanthus & Switchgrass Mode is the most economical way, because it achieves the highest economic potential compared with other modes. The sensitivity analysis showed that the farm-gate costs of Miscanthus and switchgrass are most sensitive to uncertainties associated with yield reduction and harvesting costs, while, for Jatropha, the unpredictable yield has the greatest impact on its farm-gate cost. This study can help policymakers and industrial stakeholders make strategic and tactical bioenergy development plans in China (exchange rate in 2017: 1 = 7.63ï¿¥; all the joules in this paper are higher heat value).
RESUMO
This study argues that several metrics are necessary to build up a picture of yield gain and nitrogen losses for ryegrass sheep pastures. Metrics of resource use efficiency, nitrous oxide emission factor, leached and emitted nitrogen per unit product are used to encompass yield gain and losses relating to nitrogen. These metrics are calculated from field system simulations using the DAYCENT model, validated from field sensor measurements and observations relating to crop yield, fertilizer applied, ammonium in soil and nitrate in soil and water, nitrous oxide and soil moisture. Three ryegrass pastures with traditional management for sheep grazing and silage are studied. As expected, the metrics between long-term ryegrass swards in this study are not very dissimilar. Slight differences between simulations of different field systems likely result from varying soil bulk density, as revealed by a sensitivity analysis applied to DAYCENT. The field with the highest resource use efficiency was also the field with the lowest leached inorganic nitrogen per unit product, and vice versa. Field system simulation using climate projections indicates an increase in nitrogen loss to water and air, with a corresponding increase in biomass. If we simulate both nitrogen loss by leaching and by gaseous emission, we obtain a fuller picture. Under climate projections, the field with the lowest determined nitrous oxide emissions factor, had a relatively high leached nitrogen per product amongst the three fields. When management differences were investigated, the amount of nitrous oxide per unit biomass was found to be significantly higher for an annual management of grazing only, than a silage harvest plus grazing, likely relating to the increased period of livestock on pasture. This work emphasizes how several metrics validated by auto-sampled data provide a measure of nitrogen loss, efficiency and best management practise.
Assuntos
Agricultura/métodos , Lolium/crescimento & desenvolvimento , Nitrogênio/análise , Biomassa , Clima , Monitoramento Ambiental , Fertilizantes , Óxido Nitroso/análiseRESUMO
Genetic improvement through breeding is one of the key approaches to increasing biomass supply. This paper documents the breeding progress to date for four perennial biomass crops (PBCs) that have high output-input energy ratios: namely Panicum virgatum (switchgrass), species of the genera Miscanthus (miscanthus), Salix (willow) and Populus (poplar). For each crop, we report on the size of germplasm collections, the efforts to date to phenotype and genotype, the diversity available for breeding and on the scale of breeding work as indicated by number of attempted crosses. We also report on the development of faster and more precise breeding using molecular breeding techniques. Poplar is the model tree for genetic studies and is furthest ahead in terms of biological knowledge and genetic resources. Linkage maps, transgenesis and genome editing methods are now being used in commercially focused poplar breeding. These are in development in switchgrass, miscanthus and willow generating large genetic and phenotypic data sets requiring concomitant efforts in informatics to create summaries that can be accessed and used by practical breeders. Cultivars of switchgrass and miscanthus can be seed-based synthetic populations, semihybrids or clones. Willow and poplar cultivars are commercially deployed as clones. At local and regional level, the most advanced cultivars in each crop are at technology readiness levels which could be scaled to planting rates of thousands of hectares per year in about 5 years with existing commercial developers. Investment in further development of better cultivars is subject to current market failure and the long breeding cycles. We conclude that sustained public investment in breeding plays a key role in delivering future mass-scale deployment of PBCs.