Exploring Pyroelectricity, Thermal and Photochemical Switching in a Hybrid Organic-Inorganic Crystal by In Situ X-Ray Diffraction.

The switching behavior of the novel hybrid material (FA)Na[Fe(CN)5(NO)].H2O (1) in response to temperature (T), light irradiation and electric field (E) is studied using in situ X-ray diffraction (XRD). Crystals of 1 display piezoelectricity, pyroelectricity, second and third harmonic generation. XRD shows that the FA+ are disordered at room-temperature, but stepwise cooling from 273-100 K induces gradual ordering, while cooling under an applied field (E=+40 kVcm-1) induces a sudden phase change at 140 K. Structural-dynamics calculations suggest the field pushes the system into a region of the structural potential-energy surface that is otherwise inaccessible, demonstrating that application of T and E offers an effective route to manipulating the crystal chemistry of these materials. Photocrystallography also reveals photoinduced linkage isomerism, which coexists with but is not correlated to other switching behaviors. These experiments highlight a new approach to in situ studies of hybrid materials, providing insight into the structure-property relationships that underpin their functionality.

Uncovering the role of non-covalent interactions in solid-state photoswitches by non-spherical structure refinements with NoSpherA2.

We present a charge density study of two linkage isomer photoswitches, [Pd(Bu4dien)(NO2)]BPh4·THF (1) and [Ni(Et4dien)(NO2)2] (2) using Hirshfeld Atom Refinement (HAR) methods implemented via the NoSpherA2 interface in Olex2. HAR is used to explore the electron density distribution in the photoswitchable molecules of 1 and 2, to gain an in-depth understanding of key bonding features and their influence on the single-crystal-to-single-crystal reaction. HAR analysis is also combined with ab initio calculations to explore the non-covalent interactions that influence physical properties of the photoswitches, such as the stability of the excited state nitrito-(η1-ONO) isomer. This insight can be fed back into the crystal engineering process to develop new and improved photoswitches that can be optimised towards specific applications.

Structural modifications to platinum(II) pincer complexes resulting in changes in their vapochromic and solvatochromic properties.

There is a need to develop rapidly responsive chemical sensors for the detection of low concentrations of volatile organic solvents (VOCs). Platinum pincer complexes have shown promise as sensors because of their colours and vapochromic and solvatochromic properties, that may be related to the non-covalent interactions between the pincer complexes and the guest VOCs. Here we report an investigation into a series of Pt(II) complexes based on the 1,3-di(pyridine)benzene tridentate (N⁁C⁁N) skeleton with the formula [Pt(N⁁C(R)⁁N)(CN)] (R = C(O)Me 2, C(O)OEt 3, C(O)OPh 4) with the fourth coordination site occupied by a cyanide ligand. Solid-state samples of the complexes have been tested with a range of volatiles including methanol, ethanol, acetone, dichloromethane and water, and while 2 displays thermochromism, 3 and 4 display rapidly reversible vapochromism and solvatochromism. These results are correlated with X-ray powder and single crystal X-ray structural data including an assessment of the crystal packing and the void space in the crystalline space. The cyanide ligand and the R substituents are involved in hydrogen bonding that creates the voids within the structures and interact with the solvent molecules that influence the Pt⋯Pt separation in the crystalline state.

Photocrystallographic Studies on Transition Metal Nitrito Metastable Linkage Isomers: Manipulating the Metastable State.

The design of solid-state materials whose properties and functions can be manipulated in a controlled manner by the application of light is an important objective in modern materials chemistry. When the material changes property or function, it is helpful if a simple measurable response, such as a change in color, can be detected. Potential applications for such materials are wide ranging, from data storage to smart windows. With the growing emphasis on solid-state materials that have two or more accessible energy states and which exhibit bistability, attention has turned to transition metal complexes that contain ambidentate ligands that can switch between linkage isomeric forms when activated by light. Suitable ligands that show promise in this area include nitrosyls, nitro groups, and coordinated sulfur dioxide molecules, each of which can coordinate to a metal center in more than one bonding mode. A nitrosyl normally coordinates through its N atom (η1-NO) but when photoactivated can undergo isomerism and coordinate through its O atom (η1-ON). At a molecular level, converting between these two configurations can act as an "on/off" switch. The analysis of such materials has been aided by the development of photocrystallographic techniques, which allow the full three-dimensional structure of a single crystal of a complex, under photoactivation, to be determined, when it is in either a metastable or short-lived excited state. The technique effectively brings the dimension of "time" to the crystallographic experiment and brings us closer to being able to watch solid-state processes occur in real time. In this Account, we highlight the advances made in photocrystallography for studying solid-state, photoactivated linkage isomerism and describe the factors that favor the switching process and which allow complete switching between isomers. We demonstrate that control of temperature is key to achieving either a metastable state or an excited state with a specific lifetime. We draw our conclusions from published work on the formation of photoactivated metastable states for nitrosyl and sulfur dioxide complexes and from our own work on photoactivated switching between nitro and nitrito groups. We show that efficient switching between isomers is dependent on the wavelength of light used, on the temperature at which the experiment is carried out, on the flexibility of the crystal lattice, and on both the electronic and steric environment of the ambidentate ligand undergoing isomerism. We have designed and prepared a number of nitro/nitrito isomeric metal complexes that undergo reversible 100% conversion between the two forms at temperatures close to room temperature. Through our fine control over the generation of the metastable states, it should be possible to effectively "dial up" a suitable temperature to give a metastable or an excited state with a desired lifetime.

Evaluating Iodine Uptake in a Crystalline Sponge Using Dynamic X-ray Crystallography.

The uptake of gaseous iodine into the crystalline sponge material [(ZnI2)3(tpt)2]·0.7triphenylene·0.3PhNO2·0.7C6H12 1 (tpt = 2,4,6-tris(4-pyridyl)-1,3,5-triazine) has been monitored by dynamic X-ray diffraction and thermogravimetric analysis. The X-ray analyses have enabled the location, quantity, uptake rate, and subsequent chemistry of the iodine upon inclusion into the pores to be determined. An uptake of 6.0 wt % (0.43 I2 per formula unit) was observed crystallographically over a period of 90 min before crystal degradation occurred. The included iodine molecules interact with the iodine atoms of the ZnI2 nodes at three different sites, forming coordinated I3- ions. The results contrast to recent observations on [(ZnI2)3(tpt)2] without the triphenylene guests which show the presence of I42- ions with low quantities of absorbed iodine.

Monitoring photo-induced population dynamics in metastable linkage isomer crystals: a crystallographic kinetic study of [Pd(Bu4dien)NO2]BPh4.

We present a detailed kinetic study of photo-induced solid state linkage isomerism in the compound [Pd(Bu4dien)NO2]BPh4 (Bu4dien = N,N,N',N'-tetrabutyldiethylenetriamine) using in situ photocrystallographic techniques. We explore the key variables that influence the photoconversion and develop a detailed kinetic model for the excitation and decay processes and the temperature dependence of the conversion rates. We show that by varying the temperature the lifetime of the excited state can be varied over orders of magnitude, making these systems ideal test cases for the development of new time-resolved X-ray diffraction methods. The kinetic model is used to build a numerical-simulation tool, which we use to explore the practicalities of pump-probe single-crystal diffraction experiments with minute and second time-resolution.

Modelling flavoenzymatic charge transfer events: development of catalytic indole deuteration strategies.

The formation and chemistry of flavin-indole charge transfer (CT) complexes has been studied using a model cationic flavin. The ability to form a CT complex is sensitive to indole structure as gauged by spectroscopic, kinetics and crystallographic studies. Single crystals of sufficient quality of a flavin-indole CT complex, suitable for X-ray diffraction, have been grown, allowing solid-state structural analysis. When CT complex formation is conducted in d4-methanol, an efficient and synthetically useful C-3 indole deuteration is observed.

Magnetic coupling in a hybrid Mn(ii) acetylene dicarboxylate.

The design of ligands that mediate through-bond long range super-exchange in metal-organic hybrid materials would expand chemical space beyond the commonly observed short range, low temperature magnetic ordering. Here we examine acetylene dicarboxylate as a potential ligand that could install long range magnetic ordering due to its spatially continuous frontier orbitals. Using a known Mn(ii)-containing coordination polymer we compute and measure the electronic structure and magnetic ordering. In this case, the latter is weak owing to the sub-optimal ligand coordination geometry, with a critical temperature of 2.5 K.

Steady-state and pseudo-steady-state photocrystallographic studies on linkage isomers of [Ni(Et4dien)(η2-O,ON)(η1-NO2)]: identification of a new linkage isomer.

At temperatures below 150 K, the photoactivated metastable endo-nitrito linkage isomer [Ni(Et4 dien)(η(2)-O,ON)(η(1)-ONO)] (Et4 dien=N,N,N',N'-tetraethyldiethylenetriamine) can be generated with 100 % conversion from the ground state nitro-(η(1)-NO2) isomer on irradiation with 500 nm light, in the single crystal by steady-state photocrystallographic techniques. Kinetic studies show the system is no longer metastable above 150 K, decaying back to the ground state nitro-(η(1)-NO2) arrangement over several hours at 150 K. Variable-temperature kinetic measurements in the range of 150-160 K show that the rate of endo-nitrito decay is highly dependent on temperature, and an activation energy of Eact =+48.6(4) kJ mol(-1) is calculated for the decay process. Pseudo-steady-state experiments, where the crystal is continually pumped by the light source for the duration of the X-ray experiment, show the production of a previously unobserved, exo-nitrito-(η(1)-ONO) linkage isomer only at temperatures close to the metastable limit (ca. 140-190 K). This exo isomer is considered to be a transient excited-state species, as it is only observed in data collected by pseudo-steady-state methods.

Tunable trimers: using temperature and pressure to control luminescent emission in gold(I) pyrazolate-based trimers.

A systematic investigation into the relationship between the solid-state luminescence and the intermolecular Au⋅⋅⋅Au interactions in a series of pyrazolate-based gold(I) trimers; tris(µ2 -pyrazolato-N,N')-tri-gold(I) (1), tris(µ2 -3,4,5- trimethylpyrazolato-N,N')-tri-gold(I) (2), tris(µ2 -3-methyl-5-phenylpyrazolato-N,N')-tri-gold(I) (3) and tris(µ2 -3,5-diphenylpyrazolato-N,N')-tri-gold(I) (4) has been carried out using variable temperature and high pressure X-ray crystallography, solid-state emission spectroscopy, Raman spectroscopy and computational techniques. Single-crystal X-ray studies show that there is a significant reduction in the intertrimer Au⋅⋅⋅Au distances both with decreasing temperature and increasing pressure. In the four complexes, the reduction in temperature from 293 to 100 K is accompanied by a reduction in the shortest intermolecular Au⋅⋅⋅Au contacts of between 0.04 and 0.08 Å. The solid-state luminescent emission spectra of 1 and 2 display a red shift with decreasing temperature or increasing pressure. Compound 3 does not emit under ambient conditions but displays increasingly red-shifted luminescence upon cooling or compression. Compound 4 remains emissionless, consistent with the absence of intermolecular Au⋅⋅⋅Au interactions. The largest pressure induced shift in emission is observed in 2 with a red shift of approximately 630 cm(-1) per GPa between ambient and 3.80 GPa. The shifts in all the complexes can be correlated with changes in Au⋅⋅⋅Au distance observed by diffraction.

Methods in molecular photocrystallography.

Over the last three decades, the technology that makes it possible to follow chemical processes in the solid state in real time has grown enormously. These studies have important implications for the design of new functional materials for applications in optoelectronics and sensors. Light-matter interactions are of particular importance, and photocrystallography has proved to be an important tool for studying these interactions. In this technique, the three-dimensional structures of light-activated molecules, in their excited states, are determined using single-crystal X-ray crystallography. With advances in the design of high-power lasers, pulsed LEDs and time-gated X-ray detectors, the increased availability of synchrotron facilities, and most recently, the development of XFELs, it is now possible to determine the structures of molecules with lifetimes ranging from minutes down to picoseconds, within a single crystal, using the photocrystallographic technique. This review discusses the procedures for conducting successful photocrystallographic studies and outlines the different methodologies that have been developed to study structures with specific lifetime ranges. The complexity of the methods required increases considerably as the lifetime of the excited state shortens. The discussion is supported by examples of successful photocrystallographic studies across a range of timescales and emphasises the importance of the use of complementary analytical techniques in order to understand the solid-state processes fully.

Going beyond the Ordered Bulk: A Perspective on the Use of the Cambridge Structural Database for Predictive Materials Design.

When Olga Kennard founded the Cambridge Crystallographic Data Centre in 1965, the Cambridge Structural Database was a pioneering attempt to collect scientific data in a standard format. Since then, it has evolved into an indispensable resource in contemporary molecular materials science, with over 1.25 million structures and comprehensive software tools for searching, visualizing and analyzing the data. In this perspective, we discuss the use of the CSD and CCDC tools to address the multiscale challenge of predictive materials design. We provide an overview of the core capabilities of the CSD and CCDC software and demonstrate their application to a range of materials design problems with recent case studies drawn from topical research areas, focusing in particular on the use of data mining and machine learning techniques. We also identify several challenges that can be addressed with existing capabilities or through new capabilities with varying levels of development effort.

Solid-state photochemistry of molecular photo-switchable species: the role of photocrystallographic techniques.

Over the last 30 years, the single-crystal photocrystallographic technique has been developed to determine the three-dimensional crystal and molecular structures of metastable species which have been generated in the crystal photochemically. Transition-metal complexes that have been investigated using this methodology include complexes that contain nitrosyl, dinitrogen, sulfur dioxide and nitrite ligands, all of which form new linkage isomers in the solid state when photoactivated by light of the appropriate wavelength. Both steric and electronic factors determine the level of the conversion from the ground-state structure to the metastable isomeric structure, and both the `reaction cavity' size and the nature of the intermolecular interactions are shown to be among the key factors that influence the percentage conversion.

Advancing learning equity through virtual radiology grand rounds.

PURPOSE: The COVID-19 pandemic rapidly accelerated the adoption of virtual learning in medical education, including departmental grand rounds lectures in radiology. This retrospective study sought to assess the impact of an open access virtual grand rounds program. We tested the hypothesis that virtual grand rounds would advance learning equity by increasing access to learners outside of our institution. METHODS: Twenty-two open access virtual grand rounds lectures were presented and recorded using an online videoconferencing platform. After the lecture, registrants received online access to the lecture recording for later on-demand viewing. The email address, geographical location, institutional affiliation, and medical specialty for all virtual registrants and attendees were retrospectively collected from a required online registration form. The primary outcome measure included an assessment of geographical diversity using descriptive statistics. RESULTS: Attendees of the virtual lectures were from 75 academic institutions and 27 non-academic institutions and located in 32 states, 88 cities, and 9 countries. Twenty-seven medical specialties were represented. CONCLUSION: The virtual grand rounds program in radiology contributes to free and open access educational content online for learners around the world. To address learning equity and promote international inclusion, we recommend that grand rounds organizers consider including a virtual option that allows free sharing of knowledge.

Plan Selection, Enrollee Risk, and Health Spending on the Patient Protection and Affordable Care Act Individual Marketplaces, 2019.

Importance: The Patient Protection and Affordable Care Act (ACA) individual marketplaces are a source of insurance for millions of residents in the US. However, the association between enrollee risk, health spending, and metal tier selection remains unclear. Objectives: To describe individual marketplace enrollees' metal tier selections by risk score and assess enrollees' health spending by metal tier, risk score, and spending type. Design, Setting, and Participants: This retrospective, cross-sectional study analyzed claims data from the Wakely Consulting Group ACA database, a deidentified claims database built on data voluntarily submitted by insurers. Enrollees with continuous, full-year enrollment in on-exchange or off-exchange ACA-qualified health plans during the 2019 contract year were included. Data analysis was conducted from March 2021 to January 2023. Main Outcomes and Measures: Enrollment totals, total spending, and out-of-pocket cost were calculated, stratified by metal tier and the Department of Health and Human Services (HHS) Hierarchical Condition Category (HCC) risk score for 2019. Results: Enrollment and claims data were obtained for 1 317 707 enrollees (53.5% female; mean [SD] age, 46.35 [13.43] years) across all census areas, age groups, and sexes. Of these, 34.6% were on plans with cost-sharing reductions (CSRs), 75.5% did not have an assigned HCC, and 84.0% submitted at least 1 claim. Compared with enrollees in bronze plans (17.2%), enrollees were more likely to be classified in the top HHS-HCC risk quartile if they selected platinum (42.0%), gold (34.4%), or silver (29.7%) plans. The highest share of enrollees with $0 total spending was noted with the catastrophic (26.4%) and bronze (22.7%) plans, while gold plans had the lowest share (8.1%). Median total spending was lower among bronze plan enrollees ($593; IQR, $28-$2100) vs platinum ($4111; IQR, $992-$15 821) or gold ($2675; IQR, $728-$9070). Within the top risk score decile, CSR enrollees had less average total spending than any other metal tier by more than 10%. Conclusions and Relevance: In this cross-sectional study of the ACA individual marketplace, enrollees who selected plans with higher actuarial value also had greater mean HHS-HCC risk scores and health spending. The findings suggest these differences may be associated with variation in benefit generosity by metal tier, enrollee's perceptions of future health needs, or other barriers to care access.

LED-pump-X-ray-multiprobe crystallography for sub-second timescales.

The visualization of chemical processes that occur in the solid-state is key to the design of new functional materials. One of the challenges in these studies is to monitor the processes across a range of timescales in real-time. Here, we present a pump-multiprobe single-crystal X-ray diffraction (SCXRD) technique for studying photoexcited solid-state species with millisecond-to-minute lifetimes. We excite using pulsed LEDs and synchronise to a gated X-ray detector to collect 3D structures with sub-second time resolution while maximising photo-conversion and minimising beam damage. Our implementation provides complete control of the pump-multiprobe sequencing and can access a range of timescales using the same setup. Using LEDs allows variation of the intensity and pulse width and ensures uniform illumination of the crystal, spreading the energy load in time and space. We demonstrate our method by studying the variable-temperature kinetics of photo-activated linkage isomerism in [Pd(Bu4dien)(NO2)][BPh4] single-crystals. We further show that our method extends to following indicative Bragg reflections with a continuous readout Timepix3 detector chip. Our approach is applicable to a range of physical and biological processes that occur on millisecond and slower timescales, which cannot be studied using existing techniques.

Instrument-model refinement in normalized reciprocal-vector space for X-ray Laue diffraction.

A simple yet efficient instrument-model refinement method for X-ray diffraction data is presented and discussed. The method is based on least-squares minimization of differences between respective normalized (i.e. unit length) reciprocal vectors computed for adjacent frames. The approach was primarily designed to work with synchrotron X-ray Laue diffraction data collected for small-molecule single-crystal samples. The method has been shown to work well on both simulated and experimental data. Tests performed on simulated data sets for small-molecule and protein crystals confirmed the validity of the proposed instrument-model refinement approach. Finally, examination of data sets collected at both BioCARS 14-ID-B (Advanced Photon Source) and ID09 (European Synchrotron Radiation Facility) beamlines indicated that the approach is capable of retrieving goniometer parameters (e.g. detector distance or primary X-ray beam centre) reliably, even when their initial estimates are rather inaccurate.

The effect of lean fish consumption on triglyceride levels.

Marine omega-3 fatty acids have an important role in reducing the risk of coronary artery disease (CAD). The American Heart Association recommends 1 g/day of omega-3 fatty acids for patients with CAD, and for those without CAD, the consumption of a variety of fish (preferably fatty fish) at least twice a week is recommended. Greater amounts of omega-3 fatty acids (4 g per day) are recommended to treat hypertriglyceridemia. Fish oil capsules are often needed to provide the greater quantities of omega-3 fatty acids necessary to treat hypertriglyceridemia, which should not obscure the important triglyceride-lowering effects of seafood consumption. The effects of fish consumption on plasma lipids and lipoproteins are well described in studies that have generally been conducted with fatty fish and fish oil capsules. This study of a group of men and women in a strictly controlled dietary setting showed that compared with a cholesterol-free diet, both lean fish and beef diets raised plasma low-density lipoprotein cholesterol levels, but the fish diet resulted in lower levels of plasma total cholesterol, very-low-density lipoprotein (VLDL) triglycerides, and VLDL cholesterol, while the beef diet resulted in higher plasma high-density lipoprotein cholesterol levels. These findings can help practitioners to extend their dietary recommendations to incorporate significant quantities of low-fat fish to reduce triglyceride levels.