Constructing Lanthanide-Organic Complexes for X-ray Scintillation and Imaging.

The photoluminescent properties of lanthanide complexes have been thoroughly investigated; however, there have been much fewer studies showcasing their potential use in ionizing radiation detection. In this work, we delve into the photo- and radio-induced luminescence of a series of lanthanide-bearing organic-inorganic hybrids and their potential as a platform for X-ray scintillation and imaging. The judicious synergy between lanthanide cations and 2,6-di(1H-pyrazol-1-yl)isonicotinate (bppCOO-) ligands affords six new materials with three distinct structures. Notably, Eu-bppCOO-1 and Tb-bppCOO-2 display sharp fingerprint X-ray-excited luminescence (XEL), the intensities of which can be linearly correlated with the X-ray dose rates over a broad dynamic range (0.007-4.55 mGy s-1). Moreover, the X-ray sensing efficacies of Eu-bppCOO-1 and Tb-bppCOO-2 were evaluated, showing that Tb-bppCOO-2 features a lower detection limit of 4.06 µGy s-1 compared to 14.55 µGy s-1 of Eu-bppCOO-1. Given the higher X-ray sensitivity and excellent radiation stability of Tb-bppCOO-2, we fabricated a flexible scintillator film for X-ray imaging by embedding finely ground Tb-bppCOO-2 in the polydimethylsiloxane (PDMS) polymer. The resulting scintillator film can be utilized for high-resolution X-ray imaging with a spatial resolution of approximately 7 lp mm-1.

Adsorption and Detection of Iodine Species by a Thorium-Based Metal-Organic Framework.

Actinide-bearing metal-organic frameworks (MOFs) encompass intriguing structures and properties, but the radioactivity of actinide cripples their applications. Herein, we have constructed a new thorium-based MOF (Th-BDAT) as a bifunctional platform for the adsorption and detection of radioiodine, a more radioactive fission product that can readily spread through the atmosphere in its molecular form or via solution as anionic species. The iodine capture within the framework of Th-BDAT from both the vapor phase and the cyclohexane solution has been verified, showing that Th-BDAT features maximum I2 adsorption capacities (Qmax) of 959 and 1046 mg/g, respectively. Notably, the Qmax of Th-BDAT toward I2 from cyclohexane solution ranks among the highest value for Th-MOFs reported to date. Furthermore, incorporating highly extended and π-electron-rich BDAT4- ligands renders Th-BDAT as a luminescent chemosensor whose emission can be selectively quenched by iodate with a detection limit of 1.367 µM. Our findings thus foreshadow promising directions that might unlock the full potential of actinide-based MOFs from the point of view of practical application.

Synergistic Enhancement of Photocatalytic H2 Evolution over NH2-MIL-125 Modified with Dual Cocatalyst.

The construction of efficient photocatalysts for water splitting to enable H2 evolution is pivotal to alleviate energy issues and environmental concerns. In this work, carbon dots (CDs) were prepared by employing "green solvent" ionic liquids as carbon sources and then combined with Pt/NH2-MIL-125, resulting in the emergence of a high-efficiency photocatalyst termed CDs-Pt/NH2-MIL-125 for the first time. This composite photocatalyst exhibited outstanding photocatalytic activity in H2 production under visible light irradiation. Notably, the H2 production rate of CDs100-Pt/NH2-MIL-125 reaches up to 951.4 µmol/g/h, which was 3.1 times that of Pt/NH2-MIL-125. The characterization results indicate that CDs and Pt uniformly dispersed on the surface of NH2-MIL-125 and fabricated a synergistic compact structure, providing a high BET surface area (985 m2 g-1) and a suitable band gap. Furthermore, the distinctive embeddable-dispersed CDs and Pt, as dual cocatalyst, can harvest light and facilitate the transfer of photogenerated electrons, thereby significantly augmenting the exploitation of visible light. The plausible mechanism of photocatalytic H2 evolution over the CDs-Pt/NH2-MIL-125 catalyst was also discussed. This work introduces a promising strategy for designing high-performance CDs-MOFs-based photocatalysts, an innovative step toward achieving efficient photocatalytic water splitting for H2 production.

Ligand-Mediated Regulation of the Chemical/Thermal Stability and Catalytic Performance of Isostructural Cobalt(II) Coordination Polymers.

Regulating the chemical/thermal stability and catalytic activity of coordination polymers (CPs) to achieve high catalytic performance is topical and challenging. The CPs are competent in promoting oxidative cross-coupling, yet they have not received substantial attention. Here, the ligand effect of the secondary ligand of CPs for oxidative cross-coupling reactions was investigated. Specifically, four new isostructural CPs [Co(Fbtx)1.5(4-R-1,2-BDC)]n (denoted as Co-CP-R, Fbtx = 1,4-bis(1,2,4-triazole-1-ylmethyl)-2,3,5,6-tetrafluorobenzene, 4-R-1,2-BDC = 4-R-1,2-benzenedicarboxylate, R = F, Cl, Br, CF3) were prepared. It was found that in the reactions of oxidative amination of benzoxazoles with secondary amines and the oxidative coupling of styrenes with benzaldehydes, both the chemical and thermal stabilities of the four Co-CPs with the R group followed the trend of -CF3 > -Br > -Cl > -F. Density functional theory (DFT) calculations suggested that the difference in reactivity may be ascribed to the effect of substituent groups on the electron transition energy of the cobalt(II) center of these Co-CPs. These findings highlight the secondary ligand effect in regulating the stability and catalytic performance of coordination networks.

Unveiling the Unique Roles of Metal Coordination and Modulator in the Polymorphism Control of Metal-Organic Frameworks.

Polymorphism control of metal-organic frameworks is highly desired for elucidating structure-property relationships, but remains an empirical process and is usually done in a trial-and-error approach. We adopted the rarely used actinide cation Th4+ and a ditopic linker to construct a series of thorium-organic frameworks (TOFs) with a range of polymorphs. The extraordinary coordination versatility of Th4+ cations and clusters, coupled with synthetic modulation, gives five distinct phases, wherein the highest degree of interpenetration (threefold) and porosity (75.9 %) of TOFs have been achieved. Notably, the O atom on the capping site of the nine-coordinated Th4+ cation can function as a bridging unit to interconnect neighboring secondary building units (SBUs), affording topologies that are undocumented for other tetravalent-metal-containing MOFs. Furthermore, for the first time HCOOH has been demonstrated as a bridging unit of SBUs to further induce structural complexity. The resulting TOFs exhibit considerably different adsorption behaviors toward organic dyes, thus suggesting that TOFs represent an exceptional and promising platform for structure-property relationship study.

Boosting the Iodine Adsorption and Radioresistance of Th-UiO-66 MOFs via Aromatic Substitution.

Effective capture of radioactive iodine is of paramount importance for the safe and long-term storage of fission products in the nuclear fuel cycle. Herein, a series of functionalized Th-UiO-66 MOFs was employed as a model to investigate the effects of substituents on iodine adsorption in both solution and vapor states. Sorption studies revealed that the electro-donating amino group exhibits the most positive role on increasing the removal rate of iodine from cyclohexane and the uptake capacity of iodine vapor. Particularly, the disubstituted Th-UiO-66-(NH2 )2 can effectively remove 91.9 % of iodine (300 mg L-1 ) from cyclohexane and capture 969 mg g-1 iodine vapor, significantly higher than 59.6 % and 334 mg g-1 of untagged Th-UiO-66, respectively. In addition, the substituent effect on the radiolytic stability of MOFs was for the first time investigated, leading to the unearthing of one of the most radioresistant MOFs Th-UiO-66-NH2 reported to date.

Emergence of Thorium-Based Polyoxo Clusters as a Platform for Selective X-ray Dosimetry.

A brand-new application of thorium-bearing clusters in the field of ionizing radiation detection is exemplified by two novel hexanuclear thorium clusters, Th-bppCOO-1 and Th-bppCOO-2, which incorporate carboxylate-functionalized 2,6-di(pyrazol-1-yl)pyridine ligands. Notably, Th-bppCOO-1 is composed of an unprecedented [Th6(OH)4O4(H2O)5]12+ secondary building unit, the Th6 core of which is decorated by five H2O molecules. Furthermore, selective photoluminescence quenching responses of Th-bppCOO-1 and Th-bppCOO-2 toward X-ray over UV radiation have been demonstrated for the first time.

Interpenetration Control in Thorium Metal-Organic Frameworks: Structural Complexity toward Iodine Adsorption.

The rational design and synthesis of metal-organic frameworks with well-controlled interpenetration have been active research areas of inquiry, particularly for porosity-related applications. Herein, we extend the use of the ligand steric modulation strategy to initiate the first study of the interpenetration control of thorium-based MOFs. The approximate "hardness" of the Th4+ cation, which was conjugated with aromatic substitutions and delicately modified synthetic conditions, allows for the crystallization of single crystals of seven new Th-MOFs with five distinct topologies. Solvothermal reactions of Th(NO3)4 with the triphenyl H2TPDC ligand under variable conditions exclusively gave rise to an interpenetrated Th-MOF with a hex topology, namely Th-SINAP-16. Modifications of the ligand sterics with two pendant methyl groups to 2',5'-Me2TPDC2- and 2,2″-Me2TPDC2- afforded two noninterpenetrated UiO-68-type Th-MOFs (Th-SINAP-17 and Th-SINAP-20, respectively) with record-high pore volumes (74.8% and 75.3%, respectively) among all the thorium MOFs. Moreover, another four Th-MOFs Th-SINAP-n (n = 18, 19, 21, and 22) with three different topologies were obtained by a simple synthetic modulation. Notably, Th-SINAP-16 and Th-SINAP-21 represent the second rare examples of interpenetrated Th-MOFs reported to date. These findings revealed the unprecedented structural complexity and synthetic accessibility of Th-MOFs among all tetravalent metal containing MOFs. Such features make Th-MOFs as an ideal platform to elucidate the structure-property relationship for various applications, e.g. iodine adsorption.

Auxiliary Ligand-Dependent Adaptive Regulation of Uranyl Coordination in Mixed-Ligand Uranyl Compounds of Flexible Biphenyltetracarboxylic Acid.

The mixed-ligand strategy is one of the important methods for preparing new materials and regulating the properties of materials. In this work, by introducing different auxiliary ligands (ALs), we have obtained a series of mixed-ligand uranyl complexes (1-6) from a flexible biphenyltetracarboxylic acid (H4bptc) with an adjustable orthogonal conformation and studied the influence of different organic base molecules on the coordination and assembly of H4bptc with a uranyl cation. It is found that the coordinated ALs, including 4,4'-bipyridine-1,1'-dioxide and 1,10-phenanthroline, partially occupy the coordination sites of the uranyl center and directly affect the molecular conformations and uranyl coordination of flexible bptc linkers. On the other hand, noncoordinated ALs such as protonated 4,4'-bipyridine ([H2(4,4'-bpy)]2+) or dimethylammonium, which work as counterions in the form of encapsulated guests or hydrogen-bonded templates, also have a nonnegligible impact on the conformation and coordination of bptc linkers. Most interestingly, the AL-mediated evolution of uranyl coordination by the bptc linker and coordination geometry of the uranyl center is clearly observed, which suggests the adaptability of flexible bptc linkers to take suitable molecular configurations and uranyl coordination modes so as to adapt to the external regulator agents and varying environment. The physicochemical characterization of these uranyl compounds, especially photoluminescence, is addressed and discussed, and the results reveal that compound 5 has the potential to serve as a multifunctional radiation detection material for UV light and X-ray radiation.

Correction: Nickel-catalyzed cyanation of phenol derivatives activated by 2,4,6-trichloro-1,3,5-triazine.

Correction for 'Nickel-catalyzed cyanation of phenol derivatives activated by 2,4,6-trichloro-1,3,5-triazine' by Liang Wang, et al., Org. Biomol. Chem., 2018, 16, 4816-4820, DOI: 10.1039/C8OB01034J.

Nickel-catalyzed cyanation of phenol derivatives activated by 2,4,6-trichloro-1,3,5-triazine.

A nickel-catalyzed cyanation of phenol derivatives activated by 2,4,6-trichloro-1,3,5-triazine (TCT) using aminoacetonitrile as the cyanating agent is described. This catalytic system delivered the desired products in moderate to good yields with good substrate compatibility. The readily available starting materials, cost-effective nickel catalyst and metal-free cyanating agent are the major features of the present method.

Effect of L-cysteine on the oxidation of cyclohexane catalyzed by manganeseporphyrin.

Effect of L-cysteine as the cocatalyst on the oxidation of cyclohexane by tert-butylhydroperoxide (TBHP) catalyzed by manganese tetraphenylporphyrin (MnTPP) has been investigated. The results showed that L-cysteine could moderately improve the catalytic activity of MnTPP and significantly increase the selectivity of cyclohexanol. Different from imidazole and pyridine, the L-cysteine may perform dual roles in the catalytic oxidation of cyclohexane. Besides as the axial ligand for MnTPP, the L-cysteine could also react with cyclohexyl peroxide formed as the intermediate to produce alcohol as the main product.

2,3,5,6-Tetra-fluoro-1,4-bis-({[(5-methyl-thio-phen-2-yl)methyl-idene]amino}-meth-yl)benzene.

The title compound, C20H16F4N2S2, is a flexible bis-thio-phene-type Schiff base ligand with a perfluorinated backbone. The terminal thio-phene rings are almost normal to one another with a dihedral angle of 83.8 (2)°, and they are tilted to the central tetra-fluorinated benzene ring with dihedral angles of 61.2 (2) and 77.7 (1)°. In the crystal, there are π-π inter-actions involving the benzene ring and the thiophene ring of a symmetry-related molecule with a centroid-centroid separation of 3.699 (3) Å.

2,3,5,6-Tetra-fluoro-1,4-bis-({[(thio-phen-2-yl)methyl-idene]amino}-meth-yl)benzene.

In the title compound, C18H12F4N2S2, a bis-thio-phenyl Schiff base ligand with a perifluorinated aromatic core, the complete molecule is generated by crystallographic inversion symmetry. The thio-phene and tetra-fluorinated benzene rings are oriented at a dihedral angle of 77.38 (4)°. The crystal structure exhibits C-H⋯F hydrogen bonds, resulting in supra-molecular chains along the c-axis direction.

Metal-Organic Frameworks-Derived Nanocarbon Materials and Nanometal Oxides for Photocatalytic Applications.

Harnessing low-density solar energy and converting it into high-density chemical energy through photocatalysis has emerged as a promising avenue for the production of chemicals and remediation of environmental pollution, which contributes to alleviating the overreliance on fossil fuels. In recent years, metal-organic frameworks (MOFs) have gained widespread application in the field of photocatalysis due to their photostability, tunable structures, and responsiveness in the visible light range. However, most MOFs exhibit relatively low response to light, limiting their practical applications. MOFs-derived nanomaterials not only retain the inherent advantages of pristine MOFs but also show enhanced light adsorption and responsiveness. This review categorizes and summarizes MOFs-derived nanomaterials, including nanocarbons and nanometal oxides, providing representative examples for the synthetic strategies of each category. Subsequently, the recent research progress on MOFs-derived materials in photocatalytic applications are systematically introduced, specifically in the areas of photocatalytic water splitting to H2, photocatalytic CO2 reduction, and photocatalytic water treatment. The corresponding mechanisms involved in each photocatalytic reaction are elaborated in detail. Finally, the review discusses the challenges and further directions faced by MOFs-derived nanomaterials in the field of photocatalysis, highlighting their potential role in advancing sustainable energy production and environmental remediation.

Ionic liquid post-modified carboxylate-rich MOFs for efficient catalytic CO2 cycloaddition under solvent-free conditions.

The synthesis of cyclic carbonates through cycloaddition reactions between epoxides and carbon dioxide (CO2) is an important industrial process. Metal-Organic Frameworks (MOFs) have functional and ordered pore structures, making them attractive catalysts for converting gas molecules into valuable products. One approach to enhance the catalytic activity of MOFs in CO2 cycloaddition reactions is to create open metal sites within MOFs. In this study, the amino-functionalized rare earth Gd-MOF (Gd-TPTC-NH2) and its ionic liquid composite catalysts (Gd-TPTC-NH-[BMIM]Br) were synthesized using 2'-amino-[1,1':4',1''-terphenyl]-3,3'',5,5''-tetracarboxylic acid (H4TPTC-NH2) as the ligand. The catalytic performance of these two catalysts was observed in the cycloaddition reaction of CO2 and epoxides. Under the optimized reaction conditions, Gd-TPTC-NH-[BMIM]Br can effectively catalyze the cycloaddition reaction of a variety of epoxide substrates with good to excellent yields of cyclic carbonate products. Comparatively, epichlorohydrin and epibromohydrin, which possess halogen substituents, promote higher yields of cyclic carbonates due to the electron-withdrawing nature of Cl and Br substituents. Additionally, the Gd-TPTC-NH-[BMIM]Br catalyst demonstrated good recyclability and reproducibility, maintaining its catalytic activity without any changes in its structure or properties after five reuse cycles.

6,7-Difluoro-1,2,3,4-tetra-hydro-quin-oxa-line-5,8-dicarbonitrile.

In the title compound, C10H6F2N4, the Car-N bonds are slightly shortened with respect to a standard aniline C-N bond [1.3580 (16) and 1.3618 (16) versus 1.39 Å], thus indicating some π-π conjgation with the electron-acceptor CN groups. The mol-ecule, except for two C atom of the ethyl-ene bridge, is nearly planar, the largest deviation of the other non-H atoms from the mean plane being 0.309 (2) Å. The N-C-C-N torsion angle involving the ethyl-ene bridge is 50.23 (18)°. In the crystal, mol-ecules are connected by pairs of N-H⋯N hydrogen bonds into chains along [21-1].

10-(3,5-Dinitro-phen-yl)-5,5-difluoro-1,3,7,9-tetra-methyl-5H-dipyrrolo-[1,2-c:2',1'-f][1,3,2]diaza-borinin-4-ium-5-uide.

In an effort to discover new potential boron-dipyrromethene (BODIPY) dyes, the title compound, C19H17BF2N4O4, was prepared from 2,4-dimethyl-pyrrole, 3,5-dinitro-benzaldehyde and boron trifluoride in a one-pot reaction. The BODIPY fragment is nearly planar, with a maximum deviation from the least-squares plane of 0.251 (2) Å, and the benzene ring is inclined at a dihedral angle of 86.8 (6)° to the BODIPY mean plane. In the crystal, pairs of C-H⋯F hydrogen bonds connect neighbouring mol-ecules into inversion dimers, which are linked by further strong C-H⋯F inter-actions, forming a supra-molecular layered array parallel to the bc plane.

Catalytic behavior of a ZnO/TiO2 composite in the synthesis of polycarbonate diol.

ZnO/TiO2 catalysts with different ZnO contents have been prepared through equal volume impregnation method, characterized by XRD, SEM, Py-IR, ICP, XPS, NH3-TPD and N2 adsorption/desorption, and evaluated in the synthesis of polycarbonate diol (PCDL) through transesterification. The results showed that titanium zinc oxide formed in these catalysts, and the content of acidic sites varied with the ZnO content, and ZnO/TiO2 (10%) has the highest acid amount. The ZnO/TiO2 (20%) with medium acidic sites showed the highest catalytic activity. The synthesis process of polycarbonate glycol was also optimized. Under the optimal reaction conditions, the yield of PCDL was 72.5%, and the M n reached 4829 g mol-1 with a PDI of 1.6.

A MOF-based luminometric sensor for ultra-sensitive and highly selective detection of chromium oxyanions.

Sensitization of Cr(VI) oxyanions in environmentally or industrially relevant aquatic media is highly desired owning to their biological toxicity and essential role in nuclear fuel cycle. However, many chemosensors of CrO42- and Cr2O72- suffer from critical drawbacks, including insufficient sensitivity, selectivity, and/or hydrolytic stability. In this work, we prepared a hydrolytically stable metal-organic framework, namely Hf-BITD, which can retain its crystallinity and structural integrity in solutions over a wide pH range (0-12) and in 3 M HCl. The strong emission via rigidifying fluorescent linkers allows for sensing of CrO42- and Cr2O72- in a luminescence quenching manner, with excellent linear correlations (I0/I = 1+ Ksv [Q]) in the ranges of 0-80 µM and 0-50 µM for CrO42- and Cr2O72-, respectively. The adsorption of Cr(VI) oxyanions and the concomitant resonance energy transfer between framework and analysts efficiently turn the emission of Hf-BITD off, which allows for selective recognition of CrO42- and Cr2O72- with detection limits of 0.38 nM and 0.33 nM, respectively. Furthermore, fabrication of Hf-BITD incorporating PVDF membrane makes Hf-BITD@PVDF a promising candidate for facile and effective sensitization of Cr(VI) oxyanions.