Biogenic methane in coastal unconsolidated sediment systems: A review.

Marine sediments are the world's largest known reservoir of methane. In many coastal regions, methane is trapped in sediments buried at depths ranging from centimeters to hundreds of meters below the seafloor, in the forms of gas pockets, dispersed gas bubbles and dissolved gas, also known as shallow gas (methane-dominated gas mixture). The existence of shallow gas affects the engineering geological environment and threatens the safety of artificial facilities. The escape of shallow gas from sediments into the atmosphere can even threaten ecosystem security and affect global climate change. However, until now, shallow gas has remained a mystery to the scientific community. For example, how it is generated, how it distributes and migrates in sediments, and what are the factors that influence these processes that are still unclear. In the context of increasingly intense offshore development and global warming, there is a huge gap between existing scientific understanding of shallow gas and the need to develop scientific solutions for related problems. Based on this, this paper systematically collects the information on all aspects of shallow gas mentioned above, comprehensively summarizes the current scientific understanding, and analyzes the existing shortcomings, which will provide systematic references for the research on environmental disaster prevention, engineering technology, climate change, and other fields.

Self-dispersed crumpled graphene balls in oil for friction and wear reduction.

Ultrafine particles are often used as lubricant additives because they are capable of entering tribological contacts to reduce friction and protect surfaces from wear. They tend to be more stable than molecular additives under high thermal and mechanical stresses during rubbing. It is highly desirable for these particles to remain well dispersed in oil without relying on molecular ligands. Borrowing from the analogy that pieces of paper that are crumpled do not readily stick to each other (unlike flat sheets), we expect that ultrafine particles resembling miniaturized crumpled paper balls should self-disperse in oil and could act like nanoscale ball bearings to reduce friction and wear. Here we report the use of crumpled graphene balls as a high-performance additive that can significantly improve the lubrication properties of polyalphaolefin base oil. The tribological performance of crumpled graphene balls is only weakly dependent on their concentration in oil and readily exceeds that of other carbon additives such as graphite, reduced graphene oxide, and carbon black. Notably, polyalphaolefin base oil with only 0.01-0.1 wt % of crumpled graphene balls outperforms a fully formulated commercial lubricant in terms of friction and wear reduction.

Transplantation of miRNA-34a overexpressing adipose-derived stem cell enhances rat nerve regeneration.

Peripheral nerve injury is an ongoing challenge in reconstructive surgery. Adipose-derived stem cell (ADSC) application is reported to improve nerve regeneration. In the present study, we evaluated the potential benefit of 34a-ADSCs for never regeneration. Lentiviral vectors containing miRNA-34a were constructed and ADSCs were transduced. The obtained 34a-ADSCs were used to regenerate the sciatic nerve in surgically induced sciatic nerve injury rat model. Sprague-Dawley (SD) rats were randomly divided into two groups, a 34a-ADSC group and an Lv-ADSC group. Functional nerve recovery was assessed by walking track analysis at 12 weeks after surgery. In addition, histology, including light microscopy and transmission electron microscopy, and immunohistochemistry, was utilized to investigate the nerve repair effects of 34a-ADSC. Results showed that reconstruction of the injured sciatic nerve had been significantly enhanced by restoration of nerve continuity and functional recovery in the 34a-ADSC group compared with the Lv-ADSC group. Furthermore, sciatic nerve conduction velocity and compound nerve action potential in the 34a-ADSC group was much higher than that in the Lv-ADSC group (30.72 ± 2.95 m/s vs. 22.73 ± 1.91 m/s, p< 0.0001; 11.93 ± 0.76 mV vs. 9.52 ± 0.53 mV, p = 0.0418). This study raises the possibility of using miRNA-34a overexpressed ADSCs as a promising alternative for nerve regeneration.

The High-Efficiency Calculation and Analysis of Different Quadrupole Fields Based on the Method of Fundamental Solution.

The calculation and analysis of electric fields are indispensable steps in the design of mass spectrometry. In this work, an approach for this calculation was established based on the method of fundamental solution (MFS). It was proved to be much faster and more accurate than the other popular methods, and its optimum parameters were found for the calculation of different quadrupole fields. After this, quadrupole fields with round rods and different shielding covers were computed to investigate the impact of shielding covers, and a strategy of nonequilibrium allocation in the MFS was proposed to further improve the calculational efficiency. Moreover, through field calculation and mass analysis, the performances of the quadrupole fields with rectangular rods and different electrode cross section lengths were demonstrated, and their optimum sizes were also found. The proposed method and results of analysis in this work provided a highly efficient calculational approach and useful instruction for the design of a quadrupole mass filter.

Microdroplets initiate organic-inorganic interactions and mass transfer in thermal hydrous geosystems.

Organic-inorganic interactions regulate the dynamics of hydrocarbons, water, minerals, CO2, and H2 in thermal rocks, yet their initiation remains debated. To address this, we conducted isotope-tagged and in-situ visual thermal experiments. Isotope-tagged studies revealed extensive H/O transfers in hydrous n-C20H42-H2O-feldspar systems. Visual experiments observed water microdroplets forming at 150-165 °C in oil phases near the water-oil interface without surfactants, persisting until complete miscibility above 350 °C. Electron paramagnetic resonance (EPR) detected hydroxyl free radicals concurrent with microdroplet formation. Here we propose a two-fold mechanism: water-derived and n-C20H42-derived free radicals drive interactions with organic species, while water-derived and mineral-derived ions trigger mineral interactions. These processes, facilitated by microdroplets and bulk water, blur boundaries between organic and inorganic species, enabling extensive interactions and mass transfer. Our findings redefine microscopic interplays between organic and inorganic components, offering insights into diagenetic and hydrous-metamorphic processes, and mass transfer cycles in deep basins and subduction zones.

A study of the transient gas flow affected ion transmission in atmospheric pressure interfaces based on large eddy simulation for electrospray ionization mass spectrometry.

Modern atmosphere pressure interface (API) enables high-efficiency coupling between mass analyzers in high vacuum and atmosphere ionization sources such as electrospray ionization (ESI) source. The transient gas flow entering API possesses strong compressibility and turbulent characteristics, which exerts a huge impact on ion transmission. However, the instantaneous nature and vortical morphology of the turbulence in API and its affection in ion transmission were hardly covered in the reported research. Here we conduct a transient turbulent flow-affected ion transmission evaluation for two typical APIs, the ion funnel and the S-lens, based on scale-resolving large eddy simulation and electro-hydrodynamical ion tracing simulation. In our simulation, the transient properties of the gas flow in the two APIs are illustrated and analyzed in-depth. After experimentally validated on a homemade ESI-TOF-MS platform, the results suggest that the ion funnel can achieve a higher droplet desolvation rate by introducing a unique droplet recirculation mechanism. Meanwhile, the less-dispersed gas flow in S-lens is beneficial in actuating ions axially. In conclusion, the application of the scale-resolving turbulence model helps us to understand the complicated fluid-ion interaction mechanism in APIs and is promising in the development of mass spectrometry instruments of higher performance.

Direct and sensitive determination of Cu, Pb, Cr and Ag in soil by laser ablation microwave plasma torch optical emission spectrometry.

Based on microwave plasma torch optical emission spectrometry combined with laser ablation, a direct solid sample detection device was developed for sensitive determination of heavy metals in soil. In the proposed laser ablation microwave plasma torch optical emission spectrometry (LA-MPT-OES) device, a new ablation chamber was designed, which the washout time and the relative standard deviation of this chamber were almost one-third of those of the conventional one, indicating that the proposed chamber had a smaller dead volume to provide efficient and stable transport of ablated sample particles. Meanwhile, to ensure a high signal intensity during a long exposure time, the moving sampling method was used to guarantee a sufficient injection amount. With the optimal experimental parameters, the limits of detection (LODs) of Cu, Pb, Cr and Ag were 0.075, 0.093, 0.068, 0.009 mg·kg-1, respectively, which was reduced by one to two orders of magnitude compared with that of laser-induced breakdown spectroscopy and X-ray fluorescence and was similar to the LODs of the digestion-required techniques (e.g., ICP-OES and MP-AES) and other LA-related techniques (e.g., LA-ICP-MS). Furthermore, the LA-MPT-OES was applied to the quantitative analysis of standard samples and actual samples, and the obtained determination results were in agreement with the standard values and that of atomic absorption spectrometry. The practicability and accuracy (relative errors were 0.95%-25.9%) of LA-MPT-OES determination of heavy metal elements were also validated.

Distribution and environmental risk assessment of microplastics in continental shelf sediments in the southern East China Sea: A high-spatial-resolution survey.

We report a high-spatial-resolution study on the distributions, characteristics, and environmental risks of microplastics in surface sediments of the southern East China Sea. Microplastics were omnipresent in the sediments (concentration range: 53.3-246.7; mean: 138.4 particles/kg dry-weight sediment) and enriched in nearshore areas close to urban centers relative to lower offshore concentrations. The microplastics identified were dominated by polyethylene (41.2%) and polyethylene terephthalate (19.9%) in polymer type, fibers (45.8%) and fragments (40.3%) in shape, 0.1-0.5 mm (61.0%) in size, and black (52.0%) in color. The benthic environment experienced low to moderate microplastic pollution, with polyvinylchloride exhibiting the highest ecological risk index. The high-resolution sampling revealed highly diverse polymer types and strongly patchy distributions of microplastic abundance and pollution indices in sediments. Results from this study imply that complex physical, biological, and topographic interactions control the distribution of microplastics and the associated environmental risks in coastal sediments.

Methanogenesis pathways of methanogens and their responses to substrates and temperature in sediments from the South Yellow Sea.

Although coastal sediments are major contributors to the production of atmospheric methane, the effects of environmental conditions on methanogenesis and the community of methanogenic archaea are not well understood. Here, we investigated the methanogenesis pathways in nearshore and offshore sediments from the South Yellow Sea (SYS). Moreover, the effects of the supply of methanogenic substrates (H2/CO2, acetate, trimethylamine (TMA), and methanol) and temperature on methanogenesis and the community of methanogenic archaea were further determined. Methylotrophic, hydrogenotrophic and acetotrophic methanogenesis were found to be responsible for biogenic methane production in nearshore sediments. In the offshore sediments, methylotrophic methanogenesis was the predominant methanogenic pathway. The changes in methanogenic community structure under different substrate amendments were characterized. Lower diversities were detected in substrate-amended samples with methanogenic activity. Hydrogenotrophic Methanogenium, multitrophic Methanosarcina, methylotrophic Methanococcoide, Methanococcoide or methylotrophic Methanolobus were dominant in H2/CO2-, acetate-, TMA- and methanol-amended sediment slurries, respectively. PCoA showed that the methanogen community in H2/CO2 and acetate amendments exhibited greater differences than those in other treatments. Lower temperature (10 °C) limits hydrogenotrophic and acetoclastic methanogenesis, but methylotrophic methanogenesis is much less affected. The response of methanogen diversity to the incubation temperature varied among the different substrate-amended slurries. The multitrophic methanogen Methanosarcina became increasingly abundant in H2/CO2- and acetate-amended sediment slurries when the temperature increased from 10 to 30 °C.

Bioavailability of dissolved organic nitrogen and its uptake by Ulva prolifera: Implications in the outbreak of a green bloom off the coast of Qingdao, China.

To investigate bioavailability of dissolved organic nitrogen (DON) and its contribution to nitrogen demand for Ulva prolifera, a cruise was conducted during a bloom of U. prolifera in Qingdao coastal waters, China, dissolved inorganic nitrogen (DIN) and DON components were investigated. Uptakes of both DIN and DON by U. prolifera were synchronously measured onboard using stable isotope techniques. The contribution of DON to total dissolved N (TDN) was >50% and that of labile components (urea and to amino acids, AA) to DON exceeded 30%. Both DIN and DON were utilized by U. prolifera, which uptake NH4-N preferentially, then urea, NO3-N and AA in turn; whereas the ranking of turnover times from short to long was AA, NH4-N, urea and NO3-N. The high uptake rates and short turnover time of AA and urea indicated that DON may play an important role in the nutrition of U. prolifera.

Exploration of mtDNA control region sequences in Chinese Tibetan Mastiffs.

The control region of mitochondrial DNA (mtDNA) was obtained from 40 purebred Chinese Tibetan Mastiffs (TMs). Sequence structure and genetic diversity were analyzed, and a phylogenetic tree was constructed. The TM mtDNA control region was composed of ETAS (extended termination associated sequences), CD (a central domain) and CSBs (conserved sequenced blocks) and sequence length showed some diversity, which was mainly caused by the number of 10 nucleotide repeat units [5'-GTA CAC GT (G/A) C-3'] between CSB I and CSB II, which ranged from 27 to 35 among individuals. Seventy-five polymorphic sites were identified, which defined 37 haplotypes; the haplotype diversity was 0.990, and the nucleotide diversity was 1.201. Based on the control region sequences, Chinese TMs were divided into three categories, which were consistent with the origin and geographical classification of TMs. Phylogenetic analysis of 538-bp HVR-I sequences revealed that TMs were most closely related to Labrador Retrievers.

Boundary Lubrication Mechanisms for High-Performance Friction Modifiers.

We recently reported a new molecular heterocyclic friction modifier (FM) that exhibits excellent friction and wear reduction in the boundary lubrication regime. This paper explores the mechanisms by which friction reduction occurs with heterocyclic alkyl-cyclen FM molecules. We find that these chelating molecules adsorb onto (oxidized) steel surfaces far more tenaciously than conventional FMs such as simple alkylamines. Molecular dynamics simulations argue that the surface coverage of our heterocyclic FM molecules remains close to 100% even at 200 °C. This thermal stability allows the FMs to firmly anchor to the surface, allowing the hydrocarbon chains of the molecules to interact and trap base oil lubricant molecules. This results in thicker boundary film thickness compared with conventional FMs, as shown by optical interferometry measurements.

The impact assessment of anticancer drug imatinib on the feeding behavior of rotifers with an integrated perspective: Exposure, post-exposure and re-exposure.

The anticancer drugs are getting increasing attention as an emerging contaminant in the aquatic environments. In the present study, feeding behavior of the rotifer Brachionus calyciflorus under the impact of anticancer drug imatinib was evaluated. Traditional toxicological studies usually focus on dose-effect relationship at a given exposure time, while ignore the possible impact after the exposure. Thus, how the impact varied in the post-exposure and re-exposure was also considered in the present study. The feeding depression of the rotifers was attributed to the increased concentration of imatinib. Although the filtration and ingestion rate of the rotifers recovered to a certain extent after the exposure, the significant feeding inhibition still persisted even if the exposure was ended. In the re-exposure period, the feeding behavior was less depressed than those of the exposure period, which implied that rotifers might develop a tolerance to the same toxics. The activities of acetylcholine esterase (AchE) and the levels of reactive oxygen species (ROS) in rotifers were also detected. Imatinib inhibited the activities of AchE in the exposure and re-exposure while ROS levels increased significantly in the re-exposure period. Our present study provided an integrated assessment the potential environmental risks of imatinib at a new perspective.

Alkyl-Cyclens as Effective Sulfur- and Phosphorus-Free Friction Modifiers for Boundary Lubrication.

Modern automotive engines operate at higher power densities than ever before, driving a need for new lubricant additives capable of reducing friction and wear further than ever before while not poisoning the catalytic converter. Reported in this paper is a new class of molecular friction modifier (FM), represented by 1,4,7,10-tetradodecyl-1,4,7,10-tetraazacyclododecane (1a), designed to employ thermally stable, sulfur- and phosphorus-free alkyl-substituted nitrogen heterocycles with multiple nitrogen centers per molecule. The multiple nitrogen centers enable cooperative binding to a surface which provides strong surface adsorption and lubricant film durability in the boundary lubrication (BL) regime. A 1 wt % loading of the cyclen FM 1a in Group III base oil exhibits strong surface adsorption, leading to excellent reductions in friction (70%) and wear (95%) versus the pure Group III oil across a wide temperature range. The lubricant with the new FM additive also outperforms two commercially available noncyclic amine-based FMs and a fully formulated commercial 5W30 motor oil.

Curcumin exerts anti-inflammatory and antioxidative properties in 1-methyl-4-phenylpyridinium ion (MPP(+))-stimulated mesencephalic astrocytes by interference with TLR4 and downstream signaling pathway.

Neuroinflammation is closely associated with the pathophysiology of neurodegenerative diseases including Parkinson's disease (PD). Recent evidence indicates that astrocytes also play pro-inflammatory roles in the central nervous system (CNS) by activation with toll-like receptor (TLR) ligands. Therefore, targeting anti-inflammation may provide a promising therapeutic strategy for PD. Curcumin, a polyphenolic compound isolated from Curcuma longa root, has been commonly used for the treatment of neurodegenerative diseases. However, the details of how curcumin exerts neuroprotection remain uncertain. Here, we investigated the protective effect of curcumin on 1-methyl-4-phenylpyridinium ion-(MPP(+)-) stimulated primary astrocytes. Our results showed that MPP(+) stimulation resulted in significant production of tumor necrosis factor (TNF)-α, interleukin (IL-6), and reactive oxygen species (ROS) in primary mesencephalic astrocytes. Curcumin pretreatment decreased the levels of these pro-inflammatory cytokines while increased IL-10 expression in MPP(+)-stimulated astrocytes. In addition, curcumin increased the levels of antioxidant glutathione (GSH) and reduced ROS production. Our results further showed that curcumin decreased the levels of TLR4 and its downstream effectors including NF-κB, IRF3, MyD88, and TIRF that are induced by MPP(+) as well as inhibited the immunoreactivity of TLR4 and morphological activation in MPP(+)-stimulated astrocytes. Together, data suggest that curcumin might exert a beneficial effect on neuroinflammation in the pathophysiology of PD.

Determination of sulfadiazine in Jiaozhou Bay using molecularly imprinted solid-phase extraction followed by high-performance liquid chromatography with a diode-array detector.

A highly selective sample cleanup procedure featuring molecularly imprinted solid-phase extraction (MISPE) was developed for the isolation and determination of sulfadiazine (SDZ) in seawater samples from Jiaozhou Bay, China. The molecularly imprinted polymer (MIP) was prepared using SDZ as the template molecule and methacrylic acid as the functional monomer. The MIP was used as a selective sorbent for the solid-phase extraction of SDZ. An off-line MISPE method followed by high-performance liquid chromatography (HPLC) with diode-array detection was established for the analysis of SDZ. Good linearity of the MISPE column for SDZ standard solutions was obtained within 0-200µgL(-1) (R(2)>0.99). The recoveries of spiked seawater samples were satisfactory as high as 88%. Finally, seven samples in Jiaozhou Bay were determined and there was no sulfadiazine found except #2 and #5 sample. The concentrations were respectively 0.33µgL(-1) and 0.28µgL(-1), and the relative standard deviations were 1.35% and 4.13% (n=3).

Tribological evaluation of porcine skin.

This research studies the effects of external parameters on the friction of porcine skin. A tribometer was used to evaluate the frictional behavior of the same. The effects of DI water and body oil on porcine skin against steel and glass balls were evaluated in terms of coefficient of friction (COF). The COF dropped rapidly when DI water/body oil was introduced into the sliding system and remained stable when the volume of the liquid exceeded a certain value. The COF increased with increasing sliding speed under dry conditions and decreased in wet. Under an increasing normal force, the COF decreased regardless of the presence of liquid. The ratio of the real contact area to the nominal contact area of the skin with the steel/glass ball was found to increase with a power law as the applied force was increased. These results reveal basic tribological properties of the skin in contact with a hard slider. These properties could be used as reference for the design and development of artificial skin in prosthetic applications.