Branched-gallium phosphide nanowires seeded by palladium nanoparticles.

Palladium nanoparticles were produced by a chemical reagent-free and versatile method called spark ablation with control over particle size and density. These nanoparticles were used as catalytic seed particles for gallium phosphide nanowire growth by metalorganic vapour-phase epitaxy. Controlled growth of GaP nanowires using significantly small Pd nanoparticles between 10 and 40 nm diameter was achieved by varying several growth parameters. Low V/III ratios below 2.0 promote higher Ga incorporation into the Pd nanoparticles. Moderate growth temperatures under 600 °C avoid kinking and undesirable GaP surface growth. In addition, a second batch of palladium nanoparticles of concentration up to 1000 particlesµm-2was deposited onto the GaP nanowires. Subsequently, three-dimensional nanostructures evolved, with branches growing along the surface of the GaP nanowires. The GaP nanowires revealed a zinc blende structure with multiple twinning and a PdGa phase at the tip of the nanowires and branches.

Free-Standing Metal Halide Perovskite Nanowire Arrays with Blue-Green Heterostructures.

Vertically aligned metal halide perovskite (MHP) nanowires are promising for various optoelectronic applications, which can be further enhanced by heterostructures. However, present methods to obtain free-standing vertically aligned MHP nanowire arrays and heterostructures lack the scalability needed for applications. We use a low-temperature solution process to prepare free-standing vertically aligned green-emitting CsPbBr3 nanowires from anodized aluminum oxide templates. The length is controlled from 1 to 20 µm by the precursor amount. The nanowires are single-crystalline and exhibit excellent photoluminescence, clear light guiding and high photoconductivity with a responsivity of 1.9 A/W. We demonstrate blue-green heterostructured nanowire arrays by converting the free-standing part of the nanowires to CsPbCl1.1Br1.9 in an anion exchange process. Our results demonstrate a scalable, self-aligned, and lithography-free approach to achieve high quality free-standing MHP nanowires arrays and heterostructures, offering new possibilities for optoelectronic applications.

α-Synuclein Interaction with Lipid Bilayer Discs.

α-Synuclein (aSyn) is a 140 residue long protein present in presynaptic termini of nerve cells. The protein is associated with Parkinson's disease, in which case it has been found to self-assemble into long amyloid fibrils forming intracellular inclusions that are also rich in lipids. Furthermore, its synaptic function is proposed to involve interaction with lipid membranes, and hence, it is of interest to understand aSyn-lipid membrane interactions in detail. In this paper we report on the interaction of aSyn with model membranes in the form of lipid bilayer discs. Using a combination of cryogenic transmission electron microscopy and small-angle neutron scattering, we show that circular discs undergo a significant shape transition after the adsorption of aSyn. When aSyn self-assembles into fibrils, aSyn molecules desorb from the bilayer discs, allowing them to recover to their original shape. Interestingly, the desorption process has an all-or-none character, resulting in a binary coexistence of circular bilayer discs with no adsorbed aSyn and deformed bilayer discs having a maximum amount of adsorbed protein. The observed coexistence is consistent with the recent finding of cooperative aSyn adsorption to anionic lipid bilayers.

Scanning WAXS microscopy of regenerated cellulose fibers at mesoscopic resolution.

In this work, regenerated cellulose textile fibers, Ioncell-F, dry-wet spun with different draw ratios, have been investigated by scanning wide-angle X-ray scattering (WAXS) using a mesoscopic X-ray beam. The fibers were found to be homogeneous on the 500 nm length scale. Analysis of the azimuthal angular dependence of a crystalline Bragg spot intensity revealed a radial dependence of the degree of orientation of crystallites that was found to increase with the distance from the center of the fiber. We attribute this to radial velocity gradients during the extrusion of the spin dope and the early stage of drawing. On the other hand, the fiber crystallinity was found to be essentially homogeneous over the fiber cross section.

Templated electrodeposition as a scalable and surfactant-free approach to the synthesis of Au nanoparticles with tunable aspect ratios.

A high-throughput method for the fabrication of ordered arrays of Au nanoparticles is presented. It is based on pulsed electrodeposition into porous anodic alumina templates. In contrast to many synthesis routes, it is cyanide-free, prior separation of the alumina template from the aluminium substrate is not required, and the use of contaminating surfactants/capping agents often found in colloidal synthesis is avoided. The aspect ratio of the nanoparticles can also be tuned by selecting an appropriate electrodeposition time. We show how to fabricate arrays of nanoparticles, both with branched bases and with hemispherical bases. Furthermore, we compare the different morphologies produced with electron microscopies and grazing-incidence synchrotron X-ray diffraction. We find the nanoparticles are polycrystalline in nature and are compressively strained perpendicular to the direction of growth, and expansively strained along the direction of growth. We discuss how this can produce dislocations and twinning defects that could be beneficial for catalysis.

Single-Crystalline Perovskite Nanowire Arrays for Stable X-ray Scintillators with Micrometer Spatial Resolution.

X-ray scintillation detectors based on metal halide perovskites have shown excellent light yield, but they mostly target applications with spatial resolution at the tens of micrometers level. Here, we use a one-step solution method to grow arrays of 15-µm-long single-crystalline CsPbBr3 nanowires (NWs) in an AAO (anodized aluminum oxide) membrane template, with nanowire diameters ranging from 30 to 360 nm. The CsPbBr3 nanowires in AAO (CsPbBr3 NW/AAO) show increasing X-ray scintillation efficiency with decreasing nanowire diameter, with a maximum photon yield of ∼5 300 ph/MeV at 30 nm diameter. The CsPbBr3 NW/AAO composites also display high radiation resistance, with a scintillation-intensity decrease of only ∼20-30% after 24 h of X-ray exposure (integrated dose 162 Gyair) and almost no change after ambient storage for 2 months. X-ray images can distinguish line pairs with a spacing of 2 µm for all nanowire diameters, while slanted edge measurements show a spatial resolution of ∼160 lp/mm at modulation transfer function (MTF) = 0.1. The combination of high spatial resolution, radiation stability, and easy fabrication makes these CsPbBr3 NW/AAO scintillators a promising candidate for high-resolution X-ray imaging applications.

Electron image series reconstruction of twin interfaces in InP superlattice nanowires.

The twin interface structure in twinning superlattice InP nanowires with zincblende structure has been investigated using electron exit wavefunction restoration from focal series images recorded on an aberration-corrected transmission electron microscope. By comparing the exit wavefunction phase with simulations from model structures, it was possible to determine the twin structure to be the ortho type with preserved In-P bonding order across the interface. The bending of the thin nanowires away from the intended 110 axis could be estimated locally from the calculated diffraction pattern, and this parameter was successfully taken into account in the simulations.

Vertically Aligned CsPbBr3 Nanowire Arrays with Template-Induced Crystal Phase Transition and Stability.

Metal halide perovskites show great promise for a wide range of optoelectronic applications but are plagued by instability when exposed to air and light. This work presents low-temperature solution growth of vertically aligned CsPbBr3 nanowire arrays in AAO (anodized aluminum oxide) templates with excellent stability, with samples exposed to air for 4 months still exhibiting comparable photoluminescence and UV stability to fresh samples. The single-crystal nanowire length is adjusted from ∼100 nm to 5 µm by adjusting the precursor solution amount and concentration, and we observe length-to-diameter ratios as high as 100. Structural characterization results indicate that large-diameter CsPbBr3 nanowires have an orthorhombic structure, while the 10 nm- and 20 nm-diameter nanowires adopt a cubic structure. Photoluminescence shows a gradual blue-shift in emission with decreasing nanowire diameter and marginal changes under varying illumination power intensity. The CsPbBr3-nanowires/AAO composite exhibits excellent resistance to X-ray radiation and long-term air storage, which makes it promising for future optoelectronic applications such as X-ray scintillators. These results show how physical confinement in AAO can be used to realize CsPbBr3 nanowire arrays and control their morphology and crystal structure.

Low-dose aberration corrected cryo-electron microscopy of organic specimens.

Spherical aberration (C(s)) correction in the transmission electron microscope has enabled sub-angstrom resolution imaging of inorganic materials. To achieve similar resolution for radiation-sensitive organic materials requires the microscope to be operated under hybrid conditions: low electron dose illumination of the specimen at liquid nitrogen temperature and low defocus values. Initial images from standard inorganic and organic test specimens have indicated that under these conditions C(s)-correction can provide a significant improvement in resolution (to less than 0.16nm) for direct imaging of organic samples.

A versatile double aberration-corrected, energy filtered HREM/STEM for materials science.

A HREM/STEM incorporating aberration correctors in both the probe-forming and imaging lenses has been installed at Oxford University. This unique instrument is also equipped with an in-column energy-loss (Omega-type) filter, HAADF detectors above and beneath the filter, and an EDX system. Initial tests have shown it to be capable of approximately 0.1 nm resolution in both TEM and HAADF STEM imaging modes. Some examples of applications are finally presented.

High-resolution TEM and the application of direct and indirect aberration correction.

Aberration correction leads to a substantial improvement in the directly interpretable resolution of transmission electron microscopes. Correction of the aberrations has been achieved electron-optically through a hexapole-based corrector and also indirectly by computational analysis of a focal or tilt series of images. These direct and indirect methods are complementary, and a combination of the two offers further advantages. Materials characterization has benefitted from the reduced delocalization and higher resolution in the corrected images. It is now possible, for example, to locate atomic columns at surfaces to higher accuracy and reliability. This article describes the JEM-2200FS in Oxford, which is equipped with correctors for both the image-forming and probe-forming lenses. Examples of the use of this instrument in the characterization of nanocrystalline catalysts are given together with initial results combining direct and indirect methods. The double corrector configuration enables direct imaging of the corrected probe, and a potential confocal imaging mode is described. Finally, modifications to a second generation instrument are outlined.

Experimental evaluation of a spherical aberration-corrected TEM and STEM.

We have successfully developed a spherical aberration (Cs)-corrected electron microscope for probe- and image-forming systems using hexapole correctors. The performance of the microscope has been evaluated experimentally. The point resolution attained using the image-forming Cs-corrector is better than 0.12 nm. For scanning transmission electron microscopy, the Ronchigram flat area was >40 mrad in half-angle using the probe-forming Cs-corrector.