Variation in toxicity of copper pyrithione among populations and families of the barnacle, Balanus amphitrite.

Inter- and intra-population variation in the toxicity of the antifouling biocide copper pyrithione (CuPT) was examined for nauplius larvae of the barnacle Balanus amphitrite. Nauplii were collected from brooding adults from four sites within the Newport River estuary (NC), chosen based on an initial estimation of recent and historical human activities that affect local contamination levels. Each site was characterized for the presence of polycyclic aromatic hydrocarbons and for the frequency of gastropod imposex, an indicator of contamination by organotins. Sensitivity of nauplii to CuPT varied significantly across the sites/populations, with LC(50) values ranging from 4.0 microg l(-1) to 6.1 microg l(-1). Larvae from the most contaminated site were the most sensitive to CuPT. Intrapopulation variation in toxicity was investigated by exposing nauplius larvae from 15 maternal families to a fixed concentration of CuPT (6.1 microg l(-1)). Variation in larval mortality among the families was significant, ranging from 15.1% to 98.9%.

Sonication of bacteria, phytoplankton and zooplankton: Application to treatment of ballast water.

We investigated the effect of high power ultrasound, at a frequency of 19 kHz, on the survival of bacteria, phytoplankton and zooplankton, in order to obtain estimates of effective exposure times and energy densities that could be applied to design of ultrasonic treatment systems for ballast water. Efficacy of ultrasonic treatment varied with the size of the test organism. Zooplankton required only 3-9s of exposure time and 6-19 J/mL of ultrasonic energy to realize a 90% reduction in survival. In contrast, decimal reduction times for bacteria and phytoplankton ranged from 1 to 22 min, and decimal reduction energy densities from 31 to 1240 J/mL. Our results suggest that stand-alone ultrasonic treatment systems for ballast water, operating at 19-20 kHz, may be effective for planktonic organisms >100 microm in size, but smaller planktonic organisms such as phytoplankton and bacteria will require treatment by an additional or alternative system.

Multivariate analysis of attachment of biofouling organisms in response to material surface characteristics.

Multivariate analyses were used to investigate the influence of selected surface properties (Owens-Wendt surface energy and its dispersive and polar components, static water contact angle, conceptual sign of the surface charge, zeta potentials) on the attachment patterns of five biofouling organisms (Amphibalanus amphitrite, Amphibalanus improvisus, Bugula neritina, Ulva linza, and Navicula incerta) to better understand what surface properties drive attachment across multiple fouling organisms. A library of ten xerogel coatings and a glass standard provided a range of values for the selected surface properties to compare to biofouling attachment patterns. Results from the surface characterization and biological assays were analyzed separately and in combination using multivariate statistical methods. Principal coordinate analysis of the surface property characterization and the biological assays resulted in different groupings of the xerogel coatings. In particular, the biofouling organisms were able to distinguish four coatings that were not distinguishable by the surface properties of this study. The authors used canonical analysis of principal coordinates (CAP) to identify surface properties governing attachment across all five biofouling species. The CAP pointed to surface energy and surface charge as important drivers of patterns in biological attachment, but also suggested that differentiation of the surfaces was influenced to a comparable or greater extent by the dispersive component of surface energy.

Barnacles and biofouling.

Biofouling, the attachment and growth of organisms on submerged, man-made surfaces, has plagued ship operators for at least 2500 years. Accumulation of biofouling, including barnacles and other sessile marine invertebrates, increases the frictional resistance of ships' hulls, resulting in an increase in power and in fuel consumption required to make speed. Scientists and engineers recognized over 100 years ago that in order to solve the biofouling problem, a deeper understanding of the biology of the organisms involved, particularly with regard to larval settlement and metamorphosis and adhesives and adhesion, would be required. Barnacles have served as an important tool in pursuing this research. Over the past 20 years, the pace of these studies has accelerated, likely driven by the introduction of environmental regulations banning the most effective biofouling control products from the market. Research has largely focused on larval settlement and metamorphosis, the development of new biocides, and materials/surface science. Increased research has so far, however, failed to result in commercial applications. Two recent successes (medetomidine/Selektope(®), surface-bound noradrenaline) build on our improving understanding of the role of the larval nervous system in mediating settlement and metamorphosis. New findings with regard to the curing of barnacle adhesives may pave the way to additional successes. Although the development of most current biofouling control technologies remains largely uninfluenced by basic research on, for example, the ability of settling larvae to perceive surface cues, or the nature of the interaction between organismal adhesives and the substrate, newly-developed materials can serve as useful probes to further our understanding of these processes.

The effect of solid surface tension and exposure to elevated hydrodynamic shear on Pseudomonas fluorescens biofilms grown on modified titanium surfaces.

The solid surface tension of titanium was varied by using organosilane monolayers of various terminations, minimising differences in other material properties. Both the quantity of Pseudomonas fluorescens biofilms grown on the modified surfaces, and the percentage of biofilm remaining after exposure to hydrodynamic shear stress, varied significantly as a function of solid surface tension. The quantity of biofilm was less on chloropropyl-terminated surfaces than on an alkyl-terminated surfaces. However, the percentage of biofilm remaining after exposure to hydrodynamic shear stress (which depends on the adhesion and cohesion strengths of the biofilm) was less for the alkyl-terminated surface than for the chloropropyl-terminated surface, for one of the two sample sets analysed. These results demonstrate the importance of differentiating between the quantity of biofilm on a surface and the adhesion and cohesion strength of the biofilm, and may help explain discrepancies in the existing literature regarding the effect of solid surface tension on the propensity of a surface for microfouling.

Interspecific variation in patterns of adhesion of marine fouling to silicone surfaces.

The adhesion of six fouling organisms: the barnacle Balanus eburneus, the gastropod mollusc Crepidulafornicata, the bivalve molluscs Crassostrea virginica and Ostrea/Dendrostrea spp., and the serpulid tubeworms Hydroides dianthus and H. elegans, to 12 silicone fouling-release surfaces was examined. Removal stress (adhesion strength) varied among the fouling species and among the surfaces. Principal component analysis of the removal stress data revealed that the fouling species fell into two distinct groups, one comprising the bivalve molluscs and tubeworms, and the other the barnacle and the gastropod mollusc. None of the silicone materials generated a minimum in removal stress for all the organisms tested, although several surfaces produced low adhesion strengths for both groups of species. These results suggest that fouling-release materials do not rank (in terms of adhesion strength) identically for all fouling organisms, and thus development of a globally-effective hull coating will continue to require testing against a diversity of encrusting species.

Variation among families for characteristics of the adhesive plaque in the barnacle Balanus amphitrite.

A quantitative genetics approach was used to examine variation in the characteristics of the adhesive plaque of the barnacle Balanus amphitrite Darwin attached to two silicone substrata. Barnacles settled on silicone polymer films occasionally form thick, soft adhesive plaques, in contrast to the thin, hard plaques characteristic of attachment to other surfaces. The proportion of barnacles producing a thick adhesive plaque was 0.31 for Veridian, a commercially available silicone fouling-release coating, and 0.18 for Silastic T-2, a silicone rubber used for mold-making. For both materials, significant variation among maternal families in the proportion of barnacles producing a thick adhesive plaque was observed, which suggests the presence of genetic variation, or maternal environmental effects, for this plaque characteristic. For the Veridian coating, barnacles expressing the thick adhesive plaque also exhibited significantly reduced tenacity. This represents the first reported case for potential genetic control of intraspecific phenotypic variation in the physical characteristics and tenacity of the adhesive of a fouling invertebrate.

Evaluation of brushes for removal of fouling from fouling-release surfaces, using a hydraulic cleaning device.

A portable hydraulic device has been developed for use in optimizing the design of brushes and cleaning units that may be employed to maintain fouling-release coatings. Laboratory tests showed that characteristics of experimental cleaning brushes, including bristle stiffness, density, and angle, significantly affected the shear and normal forces imparted to the surface and thus, to any encrusting organisms. The standoff distance between the cleaning unit and the surface also influenced the forces generated. The rate of rotation of the brush, however, had little effect on force. The hydraulic device, with its experimental brushes, can also be used to evaluate the cleanability of fouling-release surfaces in situ, or to assess wear of the coating system due to cleaning.

Evaluation of hydrodynamic drag on experimental fouling-release surfaces, using rotating disks.

Fouling by biofilms significantly increases frictional drag on ships' hulls. A device, the friction disk machine, designed to measure torque on rotating disks, was used to examine differences among experimental fouling-release coatings in the drag penalty due to accumulated biofilms. Penalties were measured as the percentage change in the frictional resistance coefficient Cf. Drag penalties due to microfouling ranged from 9% to 29%, comparable to previously reported values. An antifouling control coating showed a smaller drag penalty than the fouling-release coatings. There were also significant differences among the fouling-release coatings in drag due to biofilm formation. These results indicate that the friction disk machine may serve as a valuable tool for investigating the effects of experimental coatings, both antifouling and fouling-release, on microfouling and associated drag penalties.