Unraveling the Structure-Property-Performance Relationships of Fused-Ring Nonfullerene Acceptors: Toward a C-Shaped ortho-Benzodipyrrole-Based Acceptor for Highly Efficient Organic Photovoltaics.

The high-performance Y6-based nonfullerene acceptors (NFAs) feature a C-shaped A-DA'D-A-type molecular architecture with a central electron-deficient thiadiazole (Tz) A' unit. In this work, we designed and synthesized a new A-D-A-type NFA, termed CB16, having a C-shaped ortho-benzodipyrrole-based skeleton of Y6 but with the Tz unit eliminated. When processed with nonhalogenated xylene without using any additives, the binary PM6:CB16 devices display a remarkable power conversion efficiency (PCE) of 18.32% with a high open-circuit voltage (Voc) of 0.92 V, surpassing the performance of the corresponding Y6-based devices. In contrast, similarly synthesized SB16, featuring an S-shaped para-benzodipyrrole-based skeleton, yields a low PCE of 0.15% due to the strong side-chain aggregation of SB16. The C-shaped A-DNBND-A skeleton in CB16 and the Y6-series NFAs constitutes the essential structural foundation for achieving exceptional device performance. The central Tz moiety or other A' units can be employed to finely adjust intermolecular interactions. The single-crystal X-ray structure reveals that ortho-benzodipyrrole-embedded A-DNBND-A plays an important role in the formation of a 3D elliptical network packing for efficient charge transport. Solution structures of the PM6:NFAs detected by small- and wide-angle X-ray scattering (SWAXS) indicate that removing the Tz unit in the C-shaped skeleton could reduce the self-packing of CB16, thereby enhancing the complexing and networking with PM6 in the spin-coating solution and the subsequent device film. Elucidating the structure-property-performance relationships of A-DA'D-A-type NFAs in this work paves the way for the future development of structurally simplified A-D-A-type NFAs.

A turn-on-type fluorescence resonance energy transfer aptasensor for vibrio detection using aptamer-modified polyhedral oligomeric silsesquioxane-perovskite quantum dots/Ti3C2 MXenes composite probes.

A pair of composite probes based on aptamer modified polyhedral oligomeric silsesquioxane-perovskite quantum dots (POSS-PQDs-Apt) as signal probe and titanium carbide (Ti3C2) MXenes as quencher were prepared for the first time. They were employed to fabricate one turn-on-type aptasensor relying on fluorescence resonance energy transfer (FRET) for Vibrio parahaemolyticus (VP) determination. The POSS-PQDs-Apt can be adsorbed on the MXenes nanosheets, and its fluorescence was quenched due to the FRET. After the composite probes were incubated with VP for 50 min, the POSS-PQDs-Apt binding with VP can be released from the surface of MXenes, and the signal recovered due to its higher affinity to the VP than MXenes. The fluorescence intensity from 519 nm emission of the system was measured at 480 nm excitation. Under In optimized conditions, the assay can determine VP in the concentration range 102 - 106 cfu/mL, and the detection limit (LOD) was 30 cfu/mL using fluorescence detection. The LOD is still 100 cfu/mL by naked eye detection which is proper for on-line monitoring VP in aquaculture water. This method was also used to detect VP in actual samples of seawater, the recovery of spiked samples was between 93% and 106%, and relative standard deviation (RSD) was between 2.7% and 6.7%. The result is consistent with the plate count. Therefore, this assay could provide a candidate platform for screening VP in aquaculture industry.

Fluorescent aptasensor for detection of live foodborne pathogens based on multicolor perovskite-quantum-dot-encoded DNA probes and dual-stirring-bar-assisted signal amplification.

In this study, a fluorescent (FL) aptasensor was developed for on-site detection of live Salmonella typhimurium (S.T.) and Vibrio parahaemolyticus (V.P.). Complementary DNA (cDNA) of aptamer (Apt)-functionalized multicolor polyhedral oligomeric silsesquioxane-perovskite quantum dots (cDNA-POSS-PQDs) were used as encoded probes and combined with dual-stirring-bar-assisted signal amplification for pathogen quantification. In this system, bar 1 was labeled with the S.T. and V.P. Apts, and then bar 2 was functionalized with cDNA-POSS-PQDs. When S.T. and V.P. were introduced, pathogen-Apt complexes would form and be released into the supernatant from bar 1. Under agitation, the two complexes reached bar 2 and subsequently reacted with cDNA-POSS-PQDs, which were immobilized on MXene. Then, the encoded probes would be detached from bar 2 to generate FL signals in the supernatant. Notably, the pathogens can resume their free state and initiate next cycle. They swim between the two bars, and the FL signals can be gradually enhanced to maximum after several cycles. The FL signals from released encoded probes can be used to detect the analytes. In particular, live pathogens can be distinguished from dead ones by using an assay. The detection limits and linear range for S.T. and V.P. were 30 and 10 CFU/mL and 102-106 CFU/mL, respectively. Therefore, this assay has broad application potential for simultaneous on-site detection of various live pathogenic bacteria in water.

A Multicolor Fluorescence Nanoprobe Platform Using Two-Dimensional Metal Organic Framework Nanosheets and Double Stirring Bar Assisted Target Replacement for Multiple Bioanalytical Applications.

Multicolor fluorescence probes can show fluorescence of different colors when detecting different targets, and the excellent feature can create a highly differentiated multicolor sensing platform. However, most of the previously reported multicolor luminescent materials usually suffer from high toxicity and photobleaching, complex preparation procedures, and poor water solubility, which may not be conducive to bioanalytical applications. Two-dimensional metal organic frameworks (2D MOFs), which have large specific surface areas with long-range fluorescence quenching coupled with biomolecular recognition events, have encouraged innovation in biomolecular probing. Here, we propose a 2D-MOF-based multicolor fluorescent aptamer nanoprobe using a double stirring bar assisted target replacement system for enzyme-free signal amplification. It utilizes the interaction between 2D MOFs and DNA molecules to detect multiple antibiotics quickly, sensitively, and selectively. Since 2D MOFs have excellent quenching efficiency for luminescence of fluorescent-dye-labeled single-strand DNA (ssDNA), the background fluorescence can be largely reduced and the signal-to-noise ratio can be improved. When the adsorbed ssDNA formed double helix double-stranded DNA with its complementary ssDNA, its fluorescence can be almost fully recovered. The assay was tested by detecting chloramphenicol (CAP), oxytocin (OTC), and kanamycin (KANA) in biological samples. The developed aptasensor was sufficiently sensitive to detect the antibiotic residues as low as 1.5 pM CAP, 2.4 pM OTC, and 1 pM KANA (S/N = 3). It has been preliminarily used for multicolor imaging of three different antibiotics in fish tissue slices with satisfactory results.