Ultrafast Surface-Specific Spectroscopy of Water at a Photoexcited TiO2 Model Water-Splitting Photocatalyst.

A critical step in photocatalytic water dissociation is the hole-mediated oxidation reaction. Molecular-level insights into the mechanism of this complex reaction under realistic conditions with high temporal resolution are highly desirable. Here, we use femtosecond time-resolved, surface-specific vibrational sum frequency generation spectroscopy to study the photo-induced reaction directly at the interface of the photocatalyst TiO2 in contact with liquid water at room temperature. Thanks to the inherent surface specificity of the spectroscopic method, we can follow the reaction of solely the interfacial water molecules directly at the interface at timescales on which the reaction takes place. Following the generation of holes at the surface immediately after photoexcitation of the catalyst with UV light, water dissociation occurs on a sub-20 ps timescale. The reaction mechanism is similar at pH 3 and 11. In both cases, we observe the conversion of H2 O into Ti-OH groups and the deprotonation of pre-existing Ti-OH groups. This study provides unique experimental insights into the early steps of the photo-induced dissociation processes at the photocatalyst-water interface, relevant to the design of improved photocatalysts.

Structure and Dynamics of Interfacial Peptides and Proteins from Vibrational Sum-Frequency Generation Spectroscopy.

Proteins at interfaces play important roles in cell biology, immunology, bioengineering, and biomimetic material design. Many biological processes are based on interfacial protein action, ranging from cellular communication to immune responses and the protein-driven mineralization of bone. Despite the importance of interfacial proteins, comparatively little is known about their structure. The standard methods for studying crystalline or solution-phase proteins (X-ray diffraction and NMR spectroscopy) are not well-suited for studying proteins at interfaces, and for these proteins we still lack a corresponding technique that can provide the same level of structural resolution. This is not surprising in view of the challenges involved in probing the structure of proteins within monomolecular films assembled at a very thin interface in situ. Vibrational sum-frequency generation (SFG) spectroscopy has the potential to overcome this challenge and investigate the structure and dynamics of proteins at interfaces at the molecular level with subpicosecond time resolution. While SFG studies were initially limited to simple model peptides, the past decade has seen a dramatic advancement of experimental techniques and data analysis methods that has made it possible to also study interfacial proteins and their folding, binding, orientation, hydration, and dynamics. In this review, we first explain the principles of SFG spectroscopy and the experimental and theoretical methods to measure and analyze protein SFG spectra. Then we give an extensive overview of the interfacial proteins studied to date with SFG. We highlight representative examples to demonstrate recent advances in probing the structure of proteins at the interfaces of liquids, membranes, minerals, and synthetic materials.

Effect of Surfactants on the Molecular Structure of the Buried Oil/Water Interface.

The oil/water interface, for instance in emulsions, is often stabilized by surfactants. Hence, the co-existence of oil, water, and surfactant molecules at the buried oil/water interface determines macroscopic properties such as surface tension or emulsion stability. Utilizing an inherently surface sensitive spectroscopic method, sum frequency generation (SFG) spectroscopy, we show that adsorption of an anionic surfactant to the buried oil/water interface increases the magnitude of the interfacial electric field. Meanwhile, the degree of ordering of the interfacial oil molecules increases with the surfactant concentration owing to the intercalation of aliphatic chains of interfacial oil and surfactant molecules. At sufficiently high surfactant concentrations, the interfacial charge reaches a maximum value and the interfacial oil molecules arrange in a fully ordered conformation, a state which coincides with the significant decrease in interfacial tension and increased emulsion stability.

Isoelectric Points of Proteins at the Air/Liquid Interface and in Solution.

Electrostatic interactions play essential roles in determining the function, colloidal stability, and adsorption of proteins on different surfaces and interfaces. Therefore, a molecular-level understanding of the charge state of the proteins under different conditions is required to explain their macroscopic properties. In this study, we have employed an inherently surface-sensitive spectroscopic tool, sum frequency generation spectroscopy, to determine the charge state of a wide range of proteins as a function of pH at the air/liquid interface via measurement of the degree of orientation of water molecules. We compared the isoelectric point (IEP) of the 12 investigated proteins at the air/liquid interface with that in the bulk solution obtained through zeta potential measurements. Ellipsometry is performed to determine the film thickness at the air/liquid interface at different charge states. In particular, protein aggregation at the IEP is reflected by increased film thickness. For all proteins, the interfacial point of zero charge is close (with less than 1 pH unit variation) to that in the bulk solution.

How water flips at charged titanium dioxide: an SFG-study on the water-TiO2 interface.

Photocatalytic splitting of water into hydrogen and oxygen by utilizing sunlight and a photocatalyst is a promising way of generating clean energy. Here, we report a molecular-level study on heavy water (D2O) interacting with TiO2 as a model photocatalyst. We employed the surface specific technique Sum-Frequency-Generation (SFG) spectroscopy to determine the nature of the hydrogen bonding environment and the orientation of interfacial water molecules using their OD-stretch vibrations as reporters. By examining solutions with various pD-values, we observe an intensity-minimum at around pD 5, corresponding to the balance of protonation and deprotonation of TiO2 (point of zero charge). The majority of water molecules' deuterium atoms point away from the interface when the pD is below 5, and point towards the surface when the pD is higher than 5, with strong hydrogen bonds towards the surface.

Monolayer study by VSFS: in situ response to compression and shear in a contact.

Self-assembled octadecyltrichlorosilane ((OTS), CH3(CH2)17SiCl3) layers on hydroxyl-terminated silicon oxide (SiO2) were prepared. The monolayers were characterized with atomic force microscopy (AFM) and contact angle measurements; their conformation was studied before, during, and after contact with a polymer (either PDMS or PTFE) surface using the vibrational sum frequency spectroscopy (VSFS) technique. During contact, the effect of pressure was studied for both polymer surfaces, but in the case of PTFE, the effect of shear rate on the contact was simultaneously studied. The VSFS response of the monolayers with pressure was almost entirely due to changes in the real area of contact with the polymer and therefore the Fresnel factors, whereas sliding caused disorder in the previously all-trans monolayer, as evidenced by a significant increase in the population of gauche defects.

Combined in situ quartz crystal microbalance with dissipation monitoring, indirect nanoplasmonic sensing, and vibrational sum frequency spectroscopic monitoring of alkanethiol-protected copper corrosion.

In this study, we have applied three techniques to simultaneously and in situ study the initial stage of corrosion of copper protected by a self-assembled monolayer of octadecanethiol (ODT). We combined quartz crystal microbalance with dissipation monitoring (QCM-D), indirect nanoplasmonic sensing (INPS), and vibrational sum frequency spectroscopy (VSFS) and obtained complementary information about mass uptake and optical and spectroscopic changes taking place during the initial corrosion phase. All three techniques are very sensitive to the formation of a corrosion film (thickness in the range 0-0.41 nm) under mildly corrosive conditions (dry air, <0.5% relative humidity). The three techniques yield information about the viscoelasticity of the corrosion film (QCM-D), the homogeneity of the corrosion reaction on the surface (INPS), and the stability of the ODT protection layer (VSFS). Furthermore, by also studying the corrosion process in humid air (ca. 70% relative humidity), we illustrate how the combination of these techniques can be used to differentiate between simultaneously occurring processes, such as water adsorption and corrosion product formation.

A comprehensive methodology to study double emulsion stability.

HYPOTHESIS: The stability of emulsions requires the fast formation of viscoelastic interfaces between water and oil phases. In double emulsions, two surfactant types (hydrophilic and lipophilic) are present and two interfacial films are involved. Understanding cooperative adsorption of these surfactants and its implication on properties of water/oil/water interfacial films will enable replacing the empirical methodologies used in designing double emulsion systems with a knowledge-based approach. EXPERIMENTS AND MODEL: The distribution of surfactants between the water/oil interfaces was investigated using single droplet diffusion experiments and simulation of equilibrium surfactant density profiles. The stability of the interfaces against coalescence was characterized by dye transport in a leach cell and coalescence time of single droplets in a model experiment. The conformation of the surfactants at an interface was then examined via surface rheology, sum frequency generation spectroscopy, and dissipative particle dynamics simulation. FINDINGS: Two selected hydrophilic surfactants combined with a lipophilic surfactant induce very different properties at water/oil interfaces and different dye release behaviour from their corresponding double emulsions. Competitive adsorption of sodium dodecyl sulfate and lipophilic surfactant results in the improvement of encapsulation efficiency, elasticity of the interface, and resistance against coalescence due to the intercalation of surfactant alkyl chains into the oil chains.

Dos and don'ts tutorial for sample alignment in sum frequency generation spectroscopy.

This Tutorial aims to provide a concise yet practical guideline for different scenarios that one may face in a sum frequency generation (SFG) spectroscopy laboratory, especially when it comes to sample alignment. The effort is made to reconstruct the real and often challenging sample alignment conditions for a broad range of liquid or solid samples interfacing solid, liquid, or gas phases, with a pedagogical approach. Both newcomer operators of an SFG setup without a strong experience in nonlinear spectroscopy and the more experienced SFG users can utilize the approaches that are provided in this Tutorial for an easier and more reliable sample alignment in their SFG laboratories.

Isoelectric Point of Proteins at Hydrophobic Interfaces.

Structural and colloidal stability of proteins at different surfaces and interfaces is of great importance in many fields including medical, pharmaceutical, or material science. Due to their flexibility, proteins tend to respond to their environmental conditions and can undergo structural and conformational changes. For instance, alterations in physiological factors such as temperature, ions concentration, or pH as well as the adsorption to an interface can initiate protein aggregation. Therefore, at different surfaces and interfaces the characterization of the structural and colloidal stability of proteins, which is mainly influenced by their electrostatic and hydrophobic interactions, is of fundamental importance. In this study, we utilized sum frequency generation (SFG) spectroscopy to assess the role of solution pH on the polarity and magnitude of the electric field within the hydration shell of selected model proteins adsorbed to a hydrophobic surface. We used polystyrene (PS) as a model hydrophobic surface and determined the isoelectric point (IEP) of four structurally different model proteins. Comparing the measured IEP of proteins at the PS/solution or air/solution interface with that determined in the bulk solution via zeta potential measurement, we found significant similarities between the IEP of surface adsorbed proteins and those in the bulk aqueous phase. The pH dependence behavior of proteins was correlated to their amino acid composition and degree of hydrophobicity.

Effect of pH and urea on the proteins secondary structure at the water/air interface and in solution.

HYPOTHESIS: The secondary structure of proteins affects their functionality and performance in physiological environments or industrial applications. Change of the solution pH or the presence of protein denaturants are the main chemical means that can alter the secondary structure of proteins or lead to protein denaturation. Since proteins in the bulk solution and those residing at the solution/air interface experience different local environments, their response to chemical denaturation can be different. EXPERIMENTS: We utilize circular dichroism and chiral/achiral sum frequency generation spectroscopy to study the secondary structure of selected proteins as a function of the solution pH or in the presence of 8 M urea in the bulk solution and at the solution/air interface, respectively. FINDINGS: The liquid/air interface can enhance or decrease protein conformation stability. The change in the secondary structure of the surface adsorbed proteins in alkaline solutions occurs at pH values lower than those denaturing the studied proteins in the bulk solution. In contrast, while 8 M urea completely denatures the studied proteins in the bulk solution, the liquid/air interface prevents the urea-induced denaturation of the surface adsorbed proteins by limiting the access of urea to the hydrophobic side chains of proteins protruding to air.

The nature of self-assembled octadecylphosphonic acid (ODPA) layers on copper substrates.

HYPOTHESIS: The self-assembly of amphiphilic molecules onto solid substrates can result both in the formation of monolayers and multilayers. However, on oxidized and non-oxidized copper (Cu), only monolayer formation was reported for phosphonic acids possessing one phosphate head group. Here, the adsorption of octadecylphosphonic acid (ODPA) on Cu substrates through a self-assembly process was investigated with the initial hypothesis of monolayer formation. EXPERIMENTS: The relative amount of ODPA adsorbed on a Cu substrate was determined by infrared reflection/absorption spectroscopy (IRRAS) and by atomic force microscopy (AFM) investigations before and after ODPA deposition. X-ray photoelectron spectroscopy (XPS) with sputtering was used to characterize the nature of the layers. FINDINGS: The results show that the thickness of the ODPA layer increased with deposition time, and after 1 h a multilayer film with a thickness of some tens of nm was formed. The film was robust and required long-time sonication for removal. The origin of the film robustness was attributed to the release of Cu ions, resulting in the formation of Cu-ODPA complexes with Cu ions in the form of Cu(I). Preadsorbing a monolayer of octadecylthiol (ODT) onto the Cu resulted in no ODPA adsorption, since the release of Cu(I) ions was abolished.

Water Orientation at the Calcite-Water Interface.

Mineral-water interfaces play an important role in many natural as well as technological fields. Fundamental properties of these interfaces are governed by the presence of the interfacial water and its specific structure at the surface. Calcite is particularly interesting as a dominant rock-forming mineral in the earth's crust. Here, we combine atomic force microscopy, sum-frequency generation spectroscopy, and molecular dynamics simulations to determine the position and orientation of the water molecules in the hydration layers of the calcite surface with high resolution. While atomic force microscopy provides detailed information about the position of the water molecules at the interface, sum-frequency generation spectroscopy can deduce the orientation of the water molecules. Comparison of the calcite-water interface to the interfaces of magnesite-water, magnesite-ethanol, and calcite-ethanol reveals a comprehensive picture with opposite water orientations in the first and second layer of the interface, which is corroborated by the molecular dynamics simulations.

Effect of Substrate Grain Size on Structural and Corrosion Properties of Electrodeposited Nickel Layer Protected with Self-Assembled Film of Stearic Acid.

In the present study, the impact of copper substrate grain size on the structure of the succeeding electrodeposited nickel film and its consequent corrosion resistance in 3.5% NaCl medium were evaluated before and after functionalization with stearic acid. Nickel layers were electrodeposited on two different copper sheets with average grain size of 12 and 25 µm, followed by deposition of stearic acid film through self-assembly. X-ray diffraction analysis of the electrodeposited nickel films revealed that the deposition of nickel film on the Cu substrate with small (12 µm) and large (25 µm) grains is predominantly governed by growth in the (220) and (111) planes, respectively. Both electrodeposited films initially exhibited a hydrophilic nature, with water-contact angles of 56° and <10°, respectively. After functionalization with stearic acid, superhydrophobic films with contact angles of ~150° were obtained on both samples. In a 3.5% NaCl medium, the corrosion resistance of the nickel layer electrodeposited on the copper substrate with 25 µm grains was three times greater than that deposited on the copper substrate with 12 µm grains. After functionalization, the corrosion resistance of both films was greatly improved in both short and long immersion times in 3.5% NaCl medium.

Insights into Galvanic Corrosion Behavior of Ti-Cu Dissimilar Joint: Effect of Microstructure and Volta Potential.

The effect of microstructure on corrosion behavior of a solid-state explosion welded Ti-Cu bimetal is investigated by means of alternating current-direct current (AC-DC) electrochemical measurements, optical microscopy, scanning electron microscopy, and scanning Kelvin probe force microscopy (SKPFM). The results indicate that the titanium regions in the welding interface, local melted zone (LMZ), and LMZ-Cu interface are potential sites for initiation of corrosion attacks. SKPFM mapping clearly shows that before exposure of the sample to a 3.5% NaCl corrosive solution and at the beginning of the exposure, the Cu side of the bimetal has a higher Volta potential in comparison to that of the Ti region, and thus acts as a cathode. Electrochemical measurements also confirm that titanium acts as an anode and copper as a cathode, in the first moments of immersion, in accordance with macroscopic observations and SKPFM results. However, by growing a passive layer of titanium oxide and titanium hydroxide on the Ti side after about 1 h exposure to the corrosive medium, the titanium side becomes nobler and the polarity arrangement in the galvanic couple reverses.

Vibrational Spectroscopy in Studies of Atmospheric Corrosion.

Vibrational spectroscopy has been successfully used for decades in studies of the atmospheric corrosion processes, mainly to identify the nature of corrosion products but also to quantify their amounts. In this review article, a summary of the main achievements is presented with focus on how the techniques infrared spectroscopy, Raman spectroscopy, and vibrational sum frequency spectroscopy can be used in the field. Several different studies have been discussed where these instruments have been used to assess both the nature of corrosion products as well as the properties of corrosion inhibitors. Some of these techniques offer the valuable possibility to perform in-situ measurements in real time on ongoing corrosion processes, which allows the kinetics of formation of corrosion products to be studied, and also minimizes the risk of changing the surface properties which may occur during ex-situ experiments. Since corrosion processes often occur heterogeneously over a surface, it is of great importance to obtain a deeper knowledge about atmospheric corrosion phenomena on the nano scale, and this review also discusses novel vibrational microscopy techniques allowing spectra to be acquired with a spatial resolution of 20 nm.

Chemisorbed and Physisorbed Water at the TiO2/Water Interface.

The interfacial structure of water in contact with TiO2 is the key to understand the mechanism of photocatalytic water dissociation as well as photoinduced superhydrophilicity. We investigate the interfacial molecular structure of water at the surface of anatase TiO2, using phase-sensitive sum frequency generation spectroscopy together with spectra simulation using ab initio molecular dynamic trajectories. We identify two oppositely oriented, weakly and strongly hydrogen-bonded subensembles of O-H groups at the superhydrophilic UV irradiated TiO2 surface. The water molecules with weakly hydrogen-bonded O-H groups are chemisorbed, i.e. form hydroxyl groups, at the TiO2 surface with their hydrogen atoms pointing toward bulk water. The strongly hydrogen-bonded O-H groups interact with the oxygen atom of the chemisorbed water. Their hydrogen atoms point toward the TiO2. This strong interaction between physisorbed and chemisorbed water molecules causes superhydrophilicity.