RESUMO
The simple and low-cost construction of a 3D network structure is an ideal way to prepare high-performance electromagnetic wave (EMW) absorption materials. Herein, a series of carbon skeleton/carbon nanotubes/Ni3ZnC0.7 composites (CS/CNTs/Ni3ZnC0.7) are successfully prepared by in situ growth of Ni3ZnC0.7 and CNTs on 3D melamine sponge carbon. With the increase of precursor, Ni3ZnC0.7 nanoparticles nucleate and catalyze the generation of CNTs on the surface of the carbon skeleton. The minimum reflection loss (RL) value of the S60min composite (loading time of 60 min) reaches -86.6 dB at 1.6 mm and effective absorption bandwidth (EAB, RL≤-10 dB) is up to 9.3 GHz (8.7-18 GHz). The 3D network sponge carbon with layered micro/nanostructure and hollow skeleton promotes multiple reflection and absorption mechanisms of incident EMW. The N-doping and defects can be equivalent to an electric dipole, providing dipole polarization to increase dielectric relaxation. The uniform Ni3ZnC0.7 nanoparticles and CNTs play a key role in dissipating electromagnetic energy, blocking heat transfer, and enhancing the mechanical properties of the skeleton. Fortunately, the composite displays a quite low thermal conductivity of 0.09075 W m·K-1 and good flexibility, which can provide insulation and quickly recover to its original state after being stressed.
RESUMO
With the wide application of electromagnetic waves in national defense, communication, navigation and home appliances, the electromagnetic pollution problem is becoming more and more prominent. Therefore, high-performance, and low-density composite wave-absorbing materials have attracted much attention. In this paper, three-dimensional (3D) network structures of flower-like 1T/2H Molybdenum disulfide nanosheets anchored to carbon fibers (1T/2H MoS2/CNFs) were prepared by electrostatic spinning technique and calcination process. The morphology and electromagnetic wave absorption properties were tuned by changing the content of flower-like MoS2. The optimized 1T/2H MoS2/CNFs composite exhibits superior electromagnetic wave absorption with minimum reflection (RLmin) of -42.26 dB and effective absorption bandwidth (EAB) of 6.48 GHz at 2.5 mm. Multi-facts contribute to the super performance. First, the uniquely designed nanosheet and 3D interconnected networks leads to multiple reflection and scattering of electromagnetic waves, which promotes the attenuation of electromagnetic waves. Second, the propriate content of CNFs and MoS2 with different phase regulates its impedance matching characteristic. Third, Numerous heterogeneous interfaces existed between CNFs and MoS2, 1T and 2H MoS2 phase results in interface polarization. Besides, the 1T/2H MoS2 rich in defects induces defect polarization, improving the dielectric loss. Furthermore, the electromagnetic wave absorption performance was proved via radar reflectance cross section simulation. This work illustrates 1T/2H MoS2/CNFs is a promising material for electromagnetic absorption with wide bandwidth, strong absorption, low density, and high thermal stability.
RESUMO
Nickel cobaltate/NiCo-layered double hydroxides (NiCo2O4/NiCo-LDH) as energy storage materials offer considerable potential for various applications. However, many of current methods for synthesizing NiCo2O4/NiCo-LDH suffer from long synthesis times, complex preparation process, and high temperatures and high pressures. In this study, we present a green, simple, and efficient approach known as assisted liquid-phase plasma electrolysis, which realizes the rapid fabrication of ultra-fine NiCo2O4/NiCo-LDH nanoparticle-decorated electrospun carbon nanofibers (NiCo2O4/NiCo-LDH/CNFs) composites. Ultra-fine NiCo2O4/NiCo-LDH nanoparticles (<70 nm) are uniformly deposited on the CNF surface. The CNFs are intertwined to form a highly conductive three-dimensional mesh structure, which synergizes the NiCo2O4/NiCo-LDH nanoparticles with a high specific capacitance in favor of ion/electron transport efficiency. In addition, the cooperative effect between the two phases of NiCo2O4 and NiCo-LDH further improves the electrochemical properties. The NiCo2O4/NiCo-LDH/CNFs composites exhibit a high specific capacitance of 1534.7 F/g at 1 A/g and a capacitance retention of 93.9 % after 5000 cycles. An assembled asymmetric supercapacitor using activated carbon and NiCo2O4/NiCo-LDH/CNFs composites achieves an energy density of 33.8 Wh/kg at a power density of 400 W/kg and a capacitance retention of 93.0 % after 5000 cycles. Notably, two series-connected NiCo2O4/NiCo-LDH/CNFs ASC supercapacitors can light up an LED bulb, which maintains a certain brightness even after 50 min. Hence, this work provides a new and efficient route for synthesizing carbon-based NiCo2O4/NiCo-LDH composites for use as advanced energy storage materials.
RESUMO
Carbon nanofibers (CFs) have been widely applied as electrodes for energy storage devices owing to the features of increased contact area between electrodes and electrolyte, and shortened transmission route of electrons. However, the poor electrochemical activity and severe waste of space hinder their further application as supercapacitors electrodes. In this work, MnO2-x nanoflowers restricted and epitaxial growth in/out carbon nanofibers (MnO2/MnO@CF) were prepared as excellent electrode materials for supercapacitors. With the synergistic effect of uniquely designed structure and the introduction of MnO and MnO2 nanoflowers, the prepared interconnected MnO2/MnO@CF electrodes demonstrated satisfactory electrochemical performance. Furthermore, the MnO2/MnO@CF//activated carbon (AC) asymmetric supercapacitor offered an outstanding long-term cycle stability. Besides, kinetic analysis of MnO2/MnO@CF-90 was conducted and the diffusion-dominated storage mechanism was well-revealed. This concept of "internal and external simultaneous decoration" with different valence states of manganese oxides was proven to improve the electrochemical performance of carbon nanofibers, which could be generalized to the preparation and performance improvement of other fiber-based electrodes.
RESUMO
Tailoring the omnidirectional conductivity networks in nickel oxide-based electrodes is important for ensuring their long lifespan, stability, high capacity, and high-rate capability. In this study, nickel metal nanoparticles and a three-dimensional nitrogen-doped carbon matrix were used to embellish the nickel oxide composite NiO-Ni/N-C via simplified hard templating. When a porous nitrogen-doped carbon matrix is present, a rapid pathway would be established for charging and discharging the electrons and lithium ions in a lithium-ion battery, thereby alleviating the volumetric expansion of the NiO nanoparticles during the operation of the battery. Moreover, the Ni0 ions added to serve as active sites to improve the capacity of the NiO-based electrodes and strengthen their conductivities. The multielement-effects of the optimal NiO-Ni/N-C electrode leads it to exhibit a capacity of 1310.8 mAh g-1 at 0.1 A g-1 for 120 loops and a rate capability of 441.5 mAh g-1 at 20.0 A g-1. Kinetic analysis of the prepared electrodes proved their ultrafast ionic and electronic conductivities. This strategy of hard templating reduces the number of routes required for preparing different types of electrodes, including NiO-based electrodes, and improves their electrochemical performance to enable their use in energy storage applications.
RESUMO
Developing luminescent materials with suitable correlated color temperature (CCT) and sufficient color-rendering index (CRI) is a challenging problem in the field of commercialized warm white LED lighting. Herein, a novel metal-organic gel (MOG) material named YTU-G-1(SE) was synthesized, consisting of zirconium metal coordinated with 1,1,2,2-tetrakis(4-carboxyphenyl) ethylene. YTU-G-1(SE) exhibits strong fluorescent properties with an aggregation-induced emission (AIE) effect, emitting yellow-green fluorescence at 515 nm. The internal and external quantum efficiencies (IQE/EQE) of YTU-G-1(SE) are close to unity, with values of 95.74 ± 0.5% and 88.67 ± 0.5%, respectively. Finally, we combined YTU-G-1(SE) with a commercial blue chip and a commercial red phosphor (Sr,Ca)AlSiN3:Eu2+ to fabricate a warm white light LED with a color temperature of 3736 K, a color-rendering index Ra of 88.2, and a lumen efficiency of 79.42 lm W-1. This work provides a new approach to regulating the emission of AIE and offers a novel idea for developing high-performance warm-white pc-WLEDs.
RESUMO
ZnO nanoparticles in a spherical-like structure were synthesized via filtration and calcination methods, and different amounts of ZnO nanoparticles were added to MgH2 via ball milling. The SEM images revealed that the size of the composites was about 2 µm. The composites of different states were composed of large particles with small particles covering them. After the absorption and desorption cycle, the phase of composites changed. The MgH2-2.5 wt% ZnO composite reveals excellent performance among the three samples. The results show that the MgH2-2.5 wt% ZnO sample can swiftly absorb 3.77 wt% H2 in 20 min at 523 K and even at 473 K for 1 h can absorb 1.91 wt% H2. Meanwhile, the sample of MgH2-2.5 wt% ZnO can release 5.05 wt% H2 at 573 K within 30 min. Furthermore, the activation energies (Ea) of hydrogen absorption and desorption of the MgH2-2.5 wt% ZnO composite are 72.00 and 107.58 KJ/mol H2, respectively. This work reveals that the phase changes and the catalytic action of MgH2 in the cycle after the addition of ZnO, and the facile synthesis of the ZnO can provide direction for the better synthesis of catalyst materials.
RESUMO
With the rapidly development of radar detection technology and the increasingly complex application environment in military field and electromagnetic pollution surrounded by electron devices, increasingly demand is needed for electromagnetic wave absorbent materials with high absorption efficiency and thermal stability. Herein, a novel Ni3ZnC0.7/Ni loaded puffed-rice derived carbon (RNZC) composites are successfully prepared by vacuum filtration of metal-organic frameworks gel precursor together with layered porous-structure carbon and followed by calcination. The Ni3ZnC0.7 particles uniformly decorate on the surface and pores of puffed-rice derived carbon. The puffed-rice derived carbon@Ni3ZnC0.7/Ni-400 mg (RNZC-4) sample displayed the best electromagnetic wave absorption (EMA) performances among the samples with different Ni3ZnC0.7 loading. The minimum reflection loss (RLmin) of the RNZC-4 composite reaches -39.9 dB at 8.6 GHz, while widest effective absorption bandwidth (EAB) of RNZC-4 for RL < -10 dB can reach 9.9 GHz (8.1-18 GHz, 1.49 mm). High porosity and large specific surface area promote the multiple reflection-absorption effect of the incident electromagnetic waves. The Ni3ZnC0.7 nanoparticles provide a large number of interfaces and dipole factors. Analysis reveals that the RNZC-4 remained general stability under 400 °C with formation of a small amount of NiO and ZnO phases. Surprisingly, at such high temperature, the absorbing properties of the material are improved rather than decreased. Obviously, the material still maintains good electromagnetic wave performance at high temperature, and implies that the absorber shows good performance stability. Therefore, our preparations exhibit potential applications under extreme conditions and a new insight for the design and application of bimetallic carbides.
RESUMO
Cobalt nickel bimetallic oxides (NiCo2O4) have received numerous attentions in terms of their controllable morphology, high temperature, corrosion resistance and strong electromagnetic wave (EMW) absorption capability. However, broadening the absorption bandwidth is still a huge challenge for NiCo2O4-based absorbers. Herein, the unique NiCo2O4@C core-shell microcubes with hollow structures were fabricated via a facile sacrificial template strategy. The concentration of oxygen vacancies and morphologies of the three-dimensional (3D) cubic hollow core-shell NiCo2O4@C framework were effectively optimized by adjusting the calcination temperature. The specially designed 3D framework structure facilitated the multiple reflections of incident electromagnetic waves and provided rich interfaces between multiple components, generating significant interfacial polarization losses. Dipole polarizations induced by oxygen vacancies could further enhance the attenuation ability for the incident EM waves. The optimized NiCo2O4@C hollow microcubes exhibit superior EMW absorption capability with minimum RL (RLmin) of -84.45 dB at 8.4 GHz for the thickness of 3.0 mm. Moreover, ultrabroad effective absorption bandwidth (EAB) as large as 12.48 GHz (5.52-18 GHz) is obtained. This work is believed to illuminate the path to synthesis of high-performance cobalt nickel bimetallic oxides for EMW absorbers with excellent EMW absorption capability, especially in broadening effective absorption bandwidth.
RESUMO
The agaric-like anodes of porous carbon decorated with MoO2 nanoparticles (MoO2/C) for reversible Li/Na storage were synthesized via a green and facile bio-inspired route. The uniformly distributed MoO2 nanoparticles, the porous agaric-like carbon matrix and high degree graphitization of carbon materials, effectively mitigated the huge volume changes during cycling and improved the reversible capacity, resulting in the outstanding electrochemical behaviors with excellent rate capability, high capacity and excellent stable long cycling lifespan as anodes for lithium and sodium storage. Especially, the MoO2/C electrodes showed ultralong cycling performance under high current density of 5.0 A g-1, presenting a reversible capacity of 363.2 mAh g-1 after a prolonged 2000-cycles as anodes for Li storage. Meanwhile, the MoO2/C electrodes displayed a super-long cycling lifespan of 3000 cycles with the reversible discharge capacity of 193.5 mAh g-1 at the current density of 5.0 A g-1 for Na storage. Furthermore, the kinetic analysis of MoO2/C-4 electrodes as anodes for Li/Na storage was carried out to further investigate the electrochemical behavior. The ultralong cycling performance under high-density could satisfy the demands of next-generation anode electrodes for Li/Na ion batteries, promoting the commercialization process of MoO2-based materials.
RESUMO
One-dimensional Na2(TiO)SiO4 (SNTO) nanotubes have been successfully synthesized by a straightforward hydrothermal method with the assistance of cetyltetramethyl ammonium bromide (CTAB). Herein, the influence of the Si/Ti ratio on the morphology or composition of SNTO hollow nanotubes has been investigated, and the result shows that the optimum molar ratio of the optimal morphology is 1 : 1. The prepared samples were first applied as anodes in lithium ion batteries (LIBs) for the time being and superior rate capability, ultralong and stable cycling lifespan performance were obtained. The facile and uniquely designed one-dimensional SNTO nanotube electrodes delivered a high reversible capacity of 121.9 mA h g-1 after 5000 cycles at a high current of 1.0 A g-1 without significant attenuation. The superior electrochemical properties are attributed to their special nanotube structure with a high specific surface area, which could shorten the ion/electron transport pathway, and increase the number of active sites and the contact area between the electrolyte and active electrodes. Meanwhile, the kinetic analysis of the electrochemical behaviors of SNTO hollow nanotube electrodes was carried out by performing calculations using cyclic voltammograms recorded at different scan rates, and the results showed that the obtained reversible capacity is mainly due to the capacitive contribution. This work expands the types of anode materials for LIBs, which will further promote the development of LIBs.
RESUMO
Biomass-based carbon is gaining increasing attention because it presents a promising prospect for economic growth and social sustainable development. Moreover, it is an excellent medium for application in electromagnetic and electronic devices. Here, puffed-rice-based carbon is obtained at various activating temperatures, and when the hollow bulges on the carbon disappear, the morphology of the carbon changes into sheet-like structures. The R-800 sample displays the highest ID/IG value and demonstrates the best performance when used as both a microwave absorber and an electrode material. The minimum reflection loss (RL) and bandwidth for RL < -10 dB of the R-800 sample reach -72.1 dB and 13.2 GHz, respectively, and the bandwidth for RL < -20 dB is as large as 7.0 GHz, illustrating the widest bandwidth among the five carbon specimens. The multiple reflection effects and scattering, good impedance matching, and interfacial polarization synergistically enhance the microwave absorption performances of the sample. At 1 A g-1, the specific capacitance of the R-800 sample reaches 117.2 F g-1 and the capacitance retention remains at 85.3%. Moreover, a hybrid supercapacitor R-800//R-800 demonstrates an outstanding energy density of 15.23 Wh kg-1, power density of 5739.43 W kg-1, and high cycle stability (94.5% after 5000 cycles). This functionalized biomass carbon provides a promising media for constructing a bridge between sustainable development and biomass materials.
Assuntos
Carbono , Oryza , Biomassa , Micro-Ondas , TemperaturaRESUMO
Despite the excellent electrochemical performance of MnO-based electrodes, a large capacity increase cannot be avoided during long-life cycling, which makes it difficult to seek out appropriate cathode materials to match for commercial applications. In this work, a grape-like MnO-Ni@C framework from interfacial superassembly with remarkable electrochemical properties was fabricated as anode materials for lithium-ion batteries. Electrochemical analysis indicates that the introduction of Ni not only contributes to the excellent rate capability and high specific capacity but also prevents further oxidation of MnO to the higher valence states for ultrastable long-life cycling performance. Furthermore, thermodynamic calculation proves that the ultrastable long cycling life of the Ni-Mn-O system originated from a buffer composition region to stabilize the MnO structure. Because of the unique grape-like structure and performance of the Ni-Mn-O system, the MnO-Ni@C electrode displayed an invertible specific capacity of 706 mA h g-1 after 200 cycles at a current density of 0.1 A g-1 and excellent cycling stability maintained a capacity of 476.8 mA h g-1 after 2100 cycles at 1.0 A g-1 without obvious capacity change. This new nanocomposite material could offer a novel fabrication strategy and insight for MnO-based materials and other metal oxides as anodes for improved electrochemical performance.
RESUMO
MnV2O6 is a promising anode material for lithium ion batteries with high theoretical specific capacity, abundant reserves and inexpensive constituent elements. However, in the process of lithization and de-lithization, the MnV2O6 anode material will form an amorphous phase, leading to collapse of its original layered structure; this greatly decreases its lithium storage capacity and specific capacity and affects its long-term cycle performance. In this study, 2D accordion-like MnV2O6 nanosheets with Co-doping are obtained via a hydrothermal route. The cobalt ions partially replace the positions of the manganese ions, and the emergence of Co3+ ions is inferred to induce the formation of a built-in electric field in the electrode to enhance the electrochemical behaviour of MnV2O6, presenting a high capacity of 1005.9 mA h g-1 after hundreds of cycles. The capacitive contribution to the total capacity is investigated to obtain insight into the kinetic analysis of its electrochemical behaviour. This study sheds light on an effective strategy to obtain excellent electrochemical behavior of MnV2O6-based materials and other transition metal oxides as electrodes for lithium storage.
RESUMO
TiO2 nanorod (NR) array for perovskite solar cells (PSCs) has attained great importance due to its superb power conversion efficiency (PCE) compared to that of the traditional mesoporous TiO2 film. A TiO2 compact layer for the growth of TiO2 NR array via spin-coating cannot meet the requirements for efficient NR-based PSCs. Herein, we have developed and demonstrated the insertion of a bifunctional extrathin TiO2 interlayer (5 nm) by atomic layer deposition (ALD) at the interface of the fluorine-doped tin oxide (FTO)/TiO2 compact layer to achieve alleviated electron exchange and a reduced energetic barrier. Thus, an accelerated extraction of electrons from TiO2 NR arrays via the compact layer and their transfer to the FTO substrate can improve the PSC efficiency. The thickness of the spin-coated TiO2 compact layer on the ALD-deposited TiO2 layer is spontaneously optimized. Finally, an outstanding efficiency of 20.28% has been achieved from a champion PSC with negligible hysteresis and high reliability. To the best of our knowledge, this is the first study demonstrating the superiority of TiO2-NR-based PSCs withstanding the dry heat and thermal cycling tests. The results are of great importance for the preparation of efficient and durable PSCs for real-world applications.