Rapid removal of PFOA and PFOS via modified industrial solid waste: Mechanisms and influences of water matrices.

Emerging perfluoroalkyl and polyfluoroalkyl substances contaminate waters at trace concentrations, thus rapid and selective adsorbents are pivotal to mitigate the consequent energy-intensive and time-consuming issues in remediation. In this study, coal combustion residuals-fly ash was modified (FA-SCA) to overcome the universal trade-off between high adsorption capacity and fast kinetics. FA-SCA presented rapid adsorption (teq = 2 min) of PFOX (perfluorooctanoic acid and perfluorooctanesulfonic acid, collectively), where the dynamic adsorption capacity (qdyn = qm/teq) was 2-3 orders of magnitude higher than that of benchmark activated carbons and anion-exchange resins. Investigated by advanced characterization and kinetic models, the fast kinetics and superior qdyn are attributed to (1) elevated external diffusion driven by the submicron particle size; (2) enhanced intraparticle diffusion caused by the developed mesoporous structure (Vmeso/Vmicro = 8.1); (3) numerous quaternary ammonium anion-exchange sites (840 µmol/g), and (4) appropriate adsorption affinity (0.031 L/µmol for PFOS, and 0.023 L/µmol for PFOA). Since the adsorption was proven to be a synergistic process of electrostatic and hydrophobic interactions, effective adsorption ([PFOX]ini = 1.21 µM, concentration levels of highly-contaminant-sites) was obtained at conventional natural water chemistries. High selectivity (>85.4% removal) was also achieved with organic/inorganic competitors, especially compounds with partly similar molecular structures to PFOX. In addition, >90% PFOX was removed consistently during five cycles in mild regeneration conditions (pH 12 and 50 °C). Overall, FA-SCA showed no leaching issues of toxic metals and exhibits great potential in both single-adsorption processes and treatment train systems.

Soils and spoils: mineralogy and geochemistry of mining and processing wastes from lead and zinc mining at the Gratz Mine, Owen County, Kentucky.

Purpose: Mineralogical and geochemical features of mining and processing wastes collected in Owen County, part of the Central Kentucky Lead-Zinc district, were investigated. The Gratz mine, abandoned in the 1940s, is on a dairy farm. Aside from discerning the nature of mining refuse at the site, the investigation was part of the University of Kentucky College of Pharmacy's mission to explore unusual environments in the search for unique microbiological communities. Materials and methods: Four samples of a soil-plus-spoils mix were collected from spoil piles and two samples, the sluice and coarse samples, were closely associated with the site of the ore processing. Optical petrology (polarized reflected-light, oil-immersion optics at a final magnification of 500 ×), X-ray diffraction, X-ray fluorescence, inductively coupled plasma mass spectrometry, field emission scanning electron microscopy (FE-SEM), and high-resolution transmission electron microscope (HR-TEM) with selected area electron diffraction (SAED) and/or microbeam diffraction (MBD), scanning transmission electron microscopy (STEM), and energy-dispersive X-ray spectrometer (EDS) analyses were employed to characterize the samples. Results and discussion: Calcite is the main mineral in most samples, followed by near equal amounts of quartz and dolomite. Sphalerite and galena are the principal sulfides and barite is the dominant sulfate. Geochemistry of major elements reflected the mineralogy, whereas trace elements showed different groupings between the minerals. Scandium, Cu, Ga, Ge, Cd, and Sb were found predominantly associated with Zn and Pb and sulfide minerals; Bi, Hf, In, Sn, and Zr with heavy mineral fraction; while the remaining trace elements, including the rare earths, were mostly distributed among other present phases, i.e., oxyhalides, oxides, silicates, and carbonaceous material. The data were used to illustrate the processes and conditions that control the sulfide-mineral oxidation and its potential for the environmental release of associated reaction products. Conclusions: The wastes represent a potential source of environmentally disruptive concentrations of Zn, Pb, and other sulfide-associated elements. The high share of carbonates suggests near-neutral conditions in deposited wastes, restricting sulfide weathering and further limiting the oxidant activity of Fe. The low-Fe content and its predominant presence in highly resistant hematite also constrain sulfide weathering. Consequently, the spoils have a low potential for generation of acidity and release of heavy metal(loid)s in the surrounding environment.

Metal-Containing Nanoparticles in Low-Rank Coal-Derived Fly Ash from China: Characterization and Implications toward Human Lung Toxicity.

Characterization of nanoparticles (NPs) in coal fly ashes (CFAs) is critical for better understanding the potential health-related risks resulting from coal combustion. Based on single-particle (SP)-inductively coupled plasma mass spectrometry (ICP-MS) coupled with transmission electron microscopy techniques, this study is the first to determine the concentrations and sizes of metal-containing NPs in low-rank coal-derived fly ashes. Despite only comprising a minor component of the studied CFAs by mass, NPs were the dominant fraction by particle number. Fe- and Ti-containing NPs were identified as the dominant NPs with their particle number concentration ranging from 2.5 × 107 to 2.5 × 108 particles/mg. In addition, the differences of Fe-/Ti-containing NPs in various CFAs were regulated by the coalification degree of feed coals and combustion conditions of all of the low-rank CFAs tested. In the cases where these NPs in CFAs become airborne and are inhaled, they can be taken up in pulmonary interstitial fluids. This study shows that in Gamble's solution (a lung fluid simulant), 51-87% of Fe and 63-89% of Ti (ratio of the mass of Fe-/Ti-containing NPs to the total mass of Fe/Ti) exist in the NP form and remain suspended in pulmonary fluid simulants. These NPs are bioavailable and may induce lung tissue damage.

Selective Recovery of Rare Earth Elements from Coal Fly Ash Leachates Using Liquid Membrane Processes.

Coal combustion residues and other geological waste materials have been proposed as a resource for rare earth elements (REEs, herein defined as the 14 stable lanthanides, yttrium, and scandium). The extraction of REEs from residues often generate acidified leachates that require highly selective separation methods to recover the REEs from other major soluble ions in the leachates. Here, we studied two liquid membrane processes (liquid emulsion membranes, LEM, and supported liquid membranes, SLM) and compared them to standard solvent extraction techniques for selective recovery and concentration of REEs from a leachate of coal fly ash. All separation methods involved an organic solution of di(2-ethylhexyl)phosphoric acid dissolved in kerosene or mineral oil and an acid strippant solution of 5 M nitric acid for the liquid-based separations. The LEM configuration, which separated REEs by immersing an acid-in-oil emulsion in the ash leachate, resulted in similar recovery percentages of individual REEs as the conventional solvent extraction approach. The recovery of REEs in the SLM configuration, which involved the impregnation of the solvent in a hydrophobic membrane, was slower than the LEM process. However, the SLM process was notably more selective for the heavy (and higher value) REEs, while the conventional extraction and LEM processes were more selective for the light REEs. A flux-based model of the extraction processes suggested that recovery rates were limited by REE affinity for the solvent chelator in the SLM, while the rates of REEs separation via LEM were limited by diffusive mass transfer across the liquid membrane. Altogether, these results help to identify specific steps in the recovery process that future work should target in the development of scalable liquid membrane separations for REE recovery.

Structure Determination, Functional Characterization, and Biosynthetic Implications of Nybomycin Metabolites from a Mining Reclamation Site-Associated Streptomyces.

We report the isolation and characterization of three new nybomycins (nybomycins B-D, 1-3) and six known compounds (nybomycin, 4; deoxynyboquinone, 5; α-rubromycin, 6; ß-rubromycin, 7; γ-rubromycin, 8; and [2α(1E,3E),4ß]-2-(1,3-pentadienyl)-4-piperidinol, 9) from the Rock Creek (McCreary County, KY) underground coal mine acid reclamation site isolate Streptomyces sp. AD-3-6. Nybomycin D (3) and deoxynyboquinone (5) displayed moderate (3) to potent (5) cancer cell line cytotoxicity and displayed weak to moderate anti-Gram-(+) bacterial activity, whereas rubromycins 6-8 displayed little to no cancer cell line cytotoxicity but moderate to potent anti-Gram-(+) bacterial and antifungal activity. Assessment of the impact of 3 or 5 cancer cell line treatment on 4E-BP1 phosphorylation, a predictive marker of ROS-mediated control of cap-dependent translation, also revealed deoxynyboquinone (5)-mediated downstream inhibition of 4E-BP1p. Evaluation of 1-9 in a recently established axolotl embryo tail regeneration assay also highlighted the prototypical telomerase inhibitor γ-rubromycin (8) as a new inhibitor of tail regeneration. Cumulatively, this work highlights an alternative nybomycin production strain, a small set of new nybomycin metabolites, and previously unknown functions of rubromycins (antifungal activity and inhibition of tail regeneration) and also provides a basis for revision of the previously proposed nybomycin biosynthetic pathway.

Ranking Coal Ash Materials for Their Potential to Leach Arsenic and Selenium: Relative Importance of Ash Chemistry and Site Biogeochemistry.

The chemical composition of coal ash is highly heterogeneous and dependent on the origin of the source coal, combustion parameters, and type and configuration of air pollution control devices. This heterogeneity results in uncertainty in the evaluation of leaching potential of contaminants from coal ash. The goal of this work was to identify whether a single leaching protocol could roughly group high-leaching potential coal ash from low-leaching potential coal ash, with respect to arsenic (As) and selenium (Se). We used four different leaching tests, including the Toxicity Characteristic Leaching Protocol (TCLP), natural pH, aerobic sediment microcosms, and anaerobic sediment microcosms on 10 different coal ash materials, including fly ash, lime-treated ash, and flue gas desulfurization materials. Leaching tests showed promise in categorizing high and low-leaching potential ash materials, indicating that a single point test could act as a first screening measure to identify high-risk ash materials. However, the amount of contaminant leached varied widely across tests, reflecting the importance of ambient conditions (pH, redox state) on leaching. These results demonstrate that on-site geochemical conditions play a critical role in As and Se mobilization from coal ash, underscoring the need to develop a situation-based risk assessment framework for contamination by coal ash pollutants.

Spoxazomicin D and Oxachelin C, Potent Neuroprotective Carboxamides from the Appalachian Coal Fire-Associated Isolate Streptomyces sp. RM-14-6.

The isolation and structure elucidation of six new bacterial metabolites [spoxazomicin D (2), oxachelins B and C (4, 5), and carboxamides 6-8] and 11 previously reported bacterial metabolites (1, 3, 9-12a, and 14-18) from Streptomyces sp. RM-14-6 is reported. Structures were elucidated on the basis of comprehensive 1D and 2D NMR and mass spectrometry data analysis, along with direct comparison to synthetic standards for 2, 11, and 12a,b. Complete 2D NMR assignments for the known metabolites lenoremycin (9) and lenoremycin sodium salt (10) were also provided for the first time. Comparative analysis also provided the basis for structural revision of several previously reported putative aziridine-containing compounds [exemplified by madurastatins A1, B1, C1 (also known as MBJ-0034), and MBJ-0035] as phenol-dihydrooxazoles. Bioactivity analysis [including antibacterial, antifungal, cancer cell line cytotoxicity, unfolded protein response (UPR) modulation, and EtOH damage neuroprotection] revealed 2 and 5 as potent neuroprotectives and lenoremycin (9) and its sodium salt (10) as potent UPR modulators, highlighting new functions for phenol-oxazolines/salicylates and polyether pharmacophores.

Bi- and Tetracyclic Spirotetronates from the Coal Mine Fire Isolate Streptomyces sp. LC-6-2.

The structures of 12 new "enantiomeric"-like abyssomicin metabolites (abyssomicins M-X) from Streptomyces sp. LC-6-2 are reported. Of this set, the abyssomicin W (11) contains an unprecedented 8/6/6/6 tetracyclic core, while the bicyclic abyssomicin X (12) represents the first reported naturally occurring linear spirotetronate. Metabolite structures were determined based on spectroscopic data and X-ray crystallography, and Streptomyces sp. LC-6-2 genome sequencing also revealed the corresponding putative biosynthetic gene cluster.

Mccrearamycins A-D, Geldanamycin-Derived Cyclopentenone Macrolactams from an Eastern Kentucky Abandoned Coal Mine Microbe.

Four cyclopentenone-containing ansamycin polyketides (mccrearamycins A-D), and six new geldanamycins (Gdms B-G, including new linear and mycothiol conjugates), were characterized as metabolites of Streptomyces sp. AD-23-14 isolated from the Rock Creek underground coal mine acid drainage site. Biomimetic chemical conversion studies using both simple synthetic models and Gdm D confirmed that the mccrearamycin cyclopentenone derives from benzilic acid rearrangement of 19-hydroxy Gdm, and thereby provides a new synthetic derivatization strategy and implicates a potential unique biocatalyst in mccrearamycin cyclopentenone formation. In addition to standard Hsp90α binding and cell line cytotoxicity assays, this study also highlights the first assessment of Hsp90α modulators in a new axolotl embryo tail regeneration (ETR) assay as a potential new whole animal assay for Hsp90 modulator discovery.

Trends in the Rare Earth Element Content of U.S.-Based Coal Combustion Fly Ashes.

Rare earth elements (REEs) are critical and strategic materials in the defense, energy, electronics, and automotive industries. The reclamation of REEs from coal combustion fly ash has been proposed as a way to supplement REE mining. However, the typical REE contents in coal fly ash, particularly in the United States, have not been comprehensively documented or compared among the major types of coal feedstocks that determine fly ash composition. The objective of this study was to characterize a broad selection of U.S. fly ashes of varied geological origin in order to rank their potential for REE recovery. The total and nitric acid-extractable REE content for more than 100 ash samples were correlated with characteristics such as the major element content and coal basin to elucidate trends in REE enrichment. Average total REE content (defined as the sum of the lanthanides, yttrium, and scandium) for ashes derived from Appalachian sources was 591 mg kg(-1) and significantly greater than in ashes from Illinois and Powder River basin coals (403 and 337 mg kg(-1), respectively). The fraction of critical REEs (Nd, Eu, Tb, Dy, Y, and Er) in the fly ashes was 34-38% of the total and considerably higher than in conventional ores (typically less than 15%). Powder River Basin ashes had the highest extractable REE content, with 70% of the total REE recovered by heated nitric acid digestion. This is likely due to the higher calcium content of Powder River Basin ashes, which enhances their solubility in nitric acid. Sc, Nd, and Dy were the major contributors to the total REE value in fly ash, based on their contents and recent market prices. Overall, this study shows that coal fly ash production could provide a substantial domestic supply of REEs, but the feasibility of recovery depends on the development of extraction technologies that could be tailored to the major mineral content and origins of the feed coal for the ash.

Naturally Occurring Radioactive Materials in Coals and Coal Combustion Residuals in the United States.

The distribution and enrichment of naturally occurring radioactive materials (NORM) in coal combustion residuals (CCRs) from different coal source basins have not been fully characterized in the United States. Here we provide a systematic analysis of the occurrence of NORM ((232)Th, (228)Ra, (238)U, (226)Ra, and (210)Pb) in coals and associated CCRs from the Illinois, Appalachian, and Powder River Basins. Illinois CCRs had the highest total Ra ((228)Ra + (226)Ra = 297 ± 46 Bq/kg) and the lowest (228)Ra/(226)Ra activity ratio (0.31 ± 0.09), followed by Appalachian CCRs (283 ± 34 Bq/kg; 0.67 ± 0.09), and Powder River CCRs (213 ± 21 Bq/kg; 0.79 ± 0.10). Total Ra and (228)Ra/(226)Ra variations in CCRs correspond to the U and Th concentrations and ash contents of their feed coals, and we show that these relationships can be used to predict total NORM concentrations in CCRs. We observed differential NORM volatility during combustion that results in (210)Pb enrichment and (210)Pb/(226)Ra ratios greater than 1 in most fly-ash samples. Overall, total NORM activities in CCRs are 7-10- and 3-5-fold higher than NORM activities in parent coals and average U.S. soil, respectively. This study lays the groundwork for future research related to the environmental and human health implications of CCR disposal and accidental release to the environment in the context of this elevated radioactivity.

Boron and strontium isotopic characterization of coal combustion residuals: validation of new environmental tracers.

In the U.S., coal fired power plants produce over 136 million tons of coal combustion residuals (CCRs) annually. CCRs are enriched in toxic elements, and their leachates can have significant impacts on water quality. Here we report the boron and strontium isotopic ratios of leaching experiments on CCRs from a variety of coal sources (Appalachian, Illinois, and Powder River Basins). CCR leachates had a mostly negative δ(11)B, ranging from -17.6 to +6.3‰, and (87)Sr/(86)Sr ranging from 0.70975 to 0.71251. Additionally, we utilized these isotopic ratios for tracing CCR contaminants in different environments: (1) the 2008 Tennessee Valley Authority (TVA) coal ash spill affected waters; (2) CCR effluents from power plants in Tennessee and North Carolina; (3) lakes and rivers affected by CCR effluents in North Carolina; and (4) porewater extracted from sediments in lakes affected by CCRs. The boron isotopes measured in these environments had a distinctive negative δ(11)B signature relative to background waters. In contrast (87)Sr/(86)Sr ratios in CCRs were not always exclusively different from background, limiting their use as a CCR tracer. This investigation demonstrates the validity of the combined geochemical and isotopic approach as a unique and practical identification method for delineating and evaluating the environmental impact of CCRs.

Herbimycins D-F, ansamycin analogues from Streptomyces sp. RM-7-15.

Bacterial strains belonging to the class actinomycetes were isolated from the soil near a thermal vent of the Ruth Mullins coal fire (Appalachian Mountains of eastern Kentucky). High-resolution electrospray ionization mass spectrometry and ultraviolet absorption profiles of metabolites from one of the isolates (Streptomyces sp. RM-7-15) revealed the presence of a unique set of metabolites ultimately determined to be herbimycins D-F (1-3). In addition, herbimycin A (4), dihydroherbimycin A (TAN 420E) (7), and the structurally distinct antibiotic bicycylomycin were isolated from the crude extract of Streptomyces sp. RM-7-15. Herbimycins A and D-F (1-3) displayed comparable binding affinities to the Hsp90α. While the new analogues were found to be inactive in cancer cell cytotoxicity and antimicrobial assays, they may offer new insights in the context of nontoxic ansamycin-based Hsp90 inhibitors for the treatment of neurodegenerative disease.

Frenolicins C-G, pyranonaphthoquinones from Streptomyces sp. RM-4-15.

Appalachian active coal fire sites were selected for the isolation of bacterial strains belonging to the class actinobacteria. A comparison of high-resolution electrospray ionization mass spectrometry (HRESIMS) and ultraviolet (UV) absorption profiles from isolate extracts to natural product databases suggested Streptomyces sp. RM-4-15 to produce unique metabolites. Four new pyranonaphthoquinones, frenolicins C-F (1-4), along with three known analogues, frenolicin (6), frenolicin B (7), and UCF76-A (8), were isolated from the fermentation of this strain. An additional new analogue, frenolicin G (5), along with two known compounds, deoxyfrenolicin (9) and UCF 13 (10), were isolated from the fermentation supplied with 18 mg/L of scandium chloride, the first example, to the best of our knowledge, wherein scandium chloride supplementation led to the confirmed production of new bacterial secondary metabolites. Structures 1-5 were elucidated on the basis of spectral analysis and chemical modification. While frenolicins are best known for their anticoccidial activity, the current study revealed compounds 6-9 to exhibit moderate cytotoxicity against the human lung carcinoma cell line (A549) and thereby extends the anticancer SAR for this privileged scaffold.

Pollution and health-risk assessments of Cr-contaminated soils from a tannery waste lagoon, Hebei, north China: With emphasis on Cr speciation.

In this paper, heavy metals (i.e., V, Cr, Co, Cu, Zn, Cd, Pb, and Sb) in soils from a tannery waste lagoon, Hebei, north China were investigated. Element concentrates were determined by a portable X-ray fluorescence in situ and an inductively coupled plasma mass spectrometry in the lab. Two sets of indexes, including geological accumulation index, contamination factor, and pollution load index, and hazard quotient and total carcinogenic risk were adopted to evaluate the pollution and health-risk of heavy metals. A scanning electron microscopy in conjunction with an energy dispersive X-ray spectroscopy and an X-ray photoelectron spectroscopy was used to observe chromium occurrence and speciation. With an average of 6493.11 mg/kg, chromium contents in the lagoon soils reached up to 12971.19 mg/kg, 211-times higher than the threshold of Chinese soils (61.00 mg/kg). Elevated Cr contents resulted in significantly high pollution and noncarcinogenic and carcinogenic risks in the studied area. Chromium in most soils occurred predominately as Cr3+ (60-74%), and to a lesser extent, Cr6+. The mechanism responsible for decreasing Cr6+ percentages in soils with increasing depth was summarized: Cr6+ favors aqueous environment; soil moisture decreased with increasing depth; in soils especially in the lower portion, Cr6+ was reduced by Fe0 and Fe2, transforming into Cr3+ and Fe3+. In addition, the alkaline condition promoted Cr3+ to precipitate, resulting more Cr3+ absorbing in soils. The intimate association of Cr and Fe in soils (i.e., Cr mainly occurred in Fe oxides and dolomite) further confirmed our assumptions. A combined application of microorganism (e.g., Aeromonas hydrophila) and biochar (prepared from maize stalk or peanut shells) were recommended to alleviate Cr pollution in the soils.

Combustion conditions and feed coals regulating the Fe- and Ti-containing nanoparticles in various coal fly ash.

Quantitative characteristics and sizes of nanoparticles (NPs) in coal fly ash (CFA) produced in coal-fired power plants as a function of coal type and plant design will help reveal the NP emission likelihood and their environmental implications. However, little is known about how combustion conditions and types of coal regulate the NP abundance in CFAs. In this study, based on single particle (SP)-ICP-MS technology, particle number concentrations (PNCs) and sizes of Fe- and Ti-containing NPs in CFAs were determined for samples collected from power plants of different designs and burning different types of coal. The PNCs of Fe- and Ti-containing NPs in all CFAs measured were in the range of 1.3 × 107 - 3.4 × 108 and 6.8 × 106 - 2.2 × 108 particles/mg, with the average particle sizes of 111 nm and 87 nm, respectively. The highest Fe-NP PNCs likely relate to the highest contents of Fe and pyrite in the feed coal. In addition, high TOC in CFAs are associated with metal-containing NPs, resulting in elevated abundances of these NPs with relatively large sizes. Moreover, elevated PNCs of NPs were found in CFAs produced by coal-fired power plants burning low-rank coals and with small installed capacity (especially those under 100-MW units). Compared to cyclone filters, ESPs and FFs with higher removal efficiency typically retain more Fe-/Ti- containing NPs with smaller sizes. Based on a structural equation (SE) model, raw coal properties (coal rank and Fe/Ti content), boiler types, and efficiency of particulate emission control devices likely indirectly affect PNCs of Fe- and Ti-containing NPs by influencing TOC contents and their corresponding metal concentrations of CFAs. This study provides the first analytic and comprehensive information concerning the direct and indirect regulating factors on NPs in various CFAs.

Mercury stable isotope fractionation during gaseous elemental mercury adsorption onto coal fly ash particles: Experimental and field observations.

Mercury (Hg) stable isotopes have a great potential to track coal combustion Hg emissions, but mass-dependent fractionation (MDF) during Hg adsorption onto fly ash particles could significantly alter isotope signatures of emitted Hg species. The detailed processes causing this MDF, however, are not well understood. Here, we simulated how isotopes fractionate during gaseous Hg0 adsorption onto fly ash at different times and temperatures. Kinetic MDF that preferably transfers light Hg isotopes to fly ash dominated Hg0 adsorption processes. The magnitude of MDF during Hg0 adsorption was invariable in the time-series experiment but increased significantly with increasing temperature in the temperature-series experiment. The external mass transfer and chemisorption are suggested to be the controlling processes for isotopic fractionation. Relative to diffusion-driven Hg0 adsorption, chemisorption is suggested to be a more important Hg0 adsorption step causing MDF, especially at high temperatures. The chemisorption involves Hg redox change from Hg0 to HgII and is likely enhanced with increasing temperature (50-180 °C). The proposed kinetic MDF model reveals that MDF in modern coal-fired power plants is likely driven by temperature-induced redox processes during Hg0 adsorption, and has great implications for developing MDF models in coal-fired boilers and tracing coal combustion Hg emissions.

Portable dehumidifiers as an original matrix for the study of inhalable nanoparticles in school.

Good air quality is documented as a significant factor of social justice. The human health hazards associated with air pollution are not distributed equally across cities; the most vulnerable people are more exposed to ambient air as they commute to work and wait for buses or trains at the stations. Aerosols play important roles in atmosphere quality and the climate; their oxidation at the nanoscale level may possibly increase the reactivity and toxicity of atmospheric particulates. Indoor school environments are characterized by high concentrations of different airborne particulate and gaseous pollutants. The documentation of nanoparticles (NPs), ultra-fine particles (UFPs), and micron-size particle species present in indoor primary schools are an important aspect in the recognition of their influence in respirational difficulties and decreased cognitive progress in children. This work utilizes the study of condensed water, sampled with portable dehumidifiers (PD), to describe NPs and UFPs in the vapor stage of enclosed zones. The acquired extracts were analyzed by advanced electron microscopy techniques. A total of 392 NPs and 251 UFPs were examined in a set of 22 samples acquired in moderately limited or inadequately ventilated indoor areas from several schools. Noting that NPs-related disorders happen at particular places of respirational structure, identification of site-specific NPs accumulation should be anticipated in direction to better verify the corresponding human health outcomes resulting from respirable NPs.

The key roles of Fe-bearing minerals on arsenic capture and speciation transformation during high-As bituminous coal combustion: Experimental and theoretical investigations.

The conversion of As vapor released from coal combustion to less hazardous solids is an important process to alleviate As pollution especially for high-As coal burning, but the roles of key ash components are still in debate. Here, we used multiple analytical methods across the micro to bulk scale and density functional theory to provide quantitative information on As speciation in fly ash and clarify the roles of ash components on As retention. Fly ash samples derived from the high-As bituminous coal-fired power plants showed a chemical composition of typical Class F fly ash. In-situ electron probe microanalysis (EPMA) was for the first time used to quantify and distinguish the inter-particle As distribution difference within coal fly ash. The spatial distribution of As was consistent with Fe, O, and sometimes with Ca. Grain-scale distribution of As in coal fly ash was quantified and As concentrations in single ash particles followed the order of Fe-oxides > aluminosilicates > unburned carbon > quartz. Sequential extraction and Wagner chemical plot of As confirmed that Fe minerals rather than Al-/Ca-bearing minerals played a vital role in capturing and oxidizing As3+ into solid phase (As5+). Magnetite content in fly ash well-correlated with the increase ratio of As before and after magnetic separation, suggesting magnetite enhanced As enrichment in fly ash. Density functional theory (DFT) indicated that the bridges O sites of octahedral structure on Fe3O4 (111) surface were likely strong active sites for As2O3 adsorption. This study highlights the importance of magnetite on As transformation during bituminous or high-rank coal combustion in power plants and has great implications for developing effective techniques for As removal.

Mercury capture by native fly ash carbons in coal-fired power plants.

The control of mercury in the air emissions from coal-fired power plants is an on-going challenge. The native unburned carbons in fly ash can capture varying amounts of Hg depending upon the temperature and composition of the flue gas at the air pollution control device, with Hg capture increasing with a decrease in temperature; the amount of carbon in the fly ash, with Hg capture increasing with an increase in carbon; and the form of the carbon and the consequent surface area of the carbon, with Hg capture increasing with an increase in surface area. The latter is influenced by the rank of the feed coal, with carbons derived from the combustion of low-rank coals having a greater surface area than carbons from bituminous- and anthracite-rank coals. The chemistry of the feed coal and the resulting composition of the flue gas enhances Hg capture by fly ash carbons. This is particularly evident in the correlation of feed coal Cl content to Hg oxidation to HgCl2, enhancing Hg capture. Acid gases, including HCl and H2SO4 and the combination of HCl and NO2, in the flue gas can enhance the oxidation of Hg. In this presentation, we discuss the transport of Hg through the boiler and pollution control systems, the mechanisms of Hg oxidation, and the parameters controlling Hg capture by coal-derived fly ash carbons.