Coexistence of vitreous and crystalline phases of H2O at ambient temperature.

Formation of vitreous ice during rapid compression of water at room temperature is important for biology and the study of biological systems. Here, we show that Raman spectra of rapidly compressed water at greater than 1 GPa at room temperature exhibits the signature of high-density amorphous ice, whereas the X-ray diffraction (XRD) pattern is dominated by crystalline ice VI. To resolve this apparent contradiction, we used molecular dynamics simulations to calculate full vibrational spectra and diffraction patterns of mixtures of vitreous ice and ice VI, including embedded interfaces between the two phases. We show quantitatively that Raman spectra, which probe the local polarizability with respect to atomic displacements, are dominated by the vitreous phase, whereas a small amount of the crystalline component is readily apparent by XRD. The results of our combined experimental and theoretical studies have implications for detecting vitreous phases of water, survival of biological systems under extreme conditions, and biological imaging. The results provide additional insight into the stable and metastable phases of H2O as a function of pressure and temperature, as well as of other materials undergoing pressure-induced amorphization and other metastable transitions.

Origins of ultralow velocity zones through slab-derived metallic melt.

Understanding the ultralow velocity zones (ULVZs) places constraints on the chemical composition and thermal structure of deep Earth and provides critical information on the dynamics of large-scale mantle convection, but their origin has remained enigmatic for decades. Recent studies suggest that metallic iron and carbon are produced in subducted slabs when they sink beyond a depth of 250 km. Here we show that the eutectic melting curve of the iron-carbon system crosses the current geotherm near Earth's core-mantle boundary, suggesting that dense metallic melt may form in the lowermost mantle. If concentrated into isolated patches, such melt could produce the seismically observed density and velocity features of ULVZs. Depending on the wetting behavior of the metallic melt, the resultant ULVZs may be short-lived domains that are replenished or regenerated through subduction, or long-lasting regions containing both metallic and silicate melts. Slab-derived metallic melt may produce another type of ULVZ that escapes core sequestration by reacting with the mantle to form iron-rich postbridgmanite or ferropericlase. The hypotheses connect peculiar features near Earth's core-mantle boundary to subduction of the oceanic lithosphere through the deep carbon cycle.

High-Entropy Borides under Extreme Environment of Pressures and Temperatures.

The high-entropy transition metal borides containing a random distribution of five or more constituent metallic elements offer novel opportunities in designing materials that show crystalline phase stability, high strength, and thermal oxidation resistance under extreme conditions. We present a comprehensive theoretical and experimental investigation of prototypical high-entropy boride (HEB) materials such as (Hf, Mo, Nb, Ta, Ti)B2 and (Hf, Mo, Nb, Ta, Zr)B2 under extreme environments of pressures and temperatures. The theoretical tools include modeling elastic properties by special quasi-random structures that predict a bulk modulus of 288 GPa and a shear modulus of 215 GPa at ambient conditions. HEB samples were synthesized under high pressures and high temperatures and studied to 9.5 GPa and 2273 K in a large-volume pressure cell. The thermal equation of state measurement yielded a bulk modulus of 276 GPa, in excellent agreement with theory. The measured compressive yield strength by radial X-ray diffraction technique in a diamond anvil cell was 28 GPa at a pressure of 65 GPa, which is a significant fraction of the shear modulus at high pressures. The high compressive strength and phase stability of this material under high pressures and high temperatures make it an ideal candidate for application as a structural material in nuclear and aerospace fields.

Experimental measurements of the viscosity and melt structure of alkali basalts at high pressure and temperature.

Volcanic eruptions are shallow phenomena that represent the final stage of density- and viscosity- driven processes of melt migration from source rocks at upper mantle depths. In this experimental study, we investigated the effect of pressure (0.7-7.0 GPa) and temperature (1335-2000 °C) on the viscosity and the atomic melt structure of a synthetic anhydrous primitive alkaline basalt, an analogue of the pre-eruptive magma that likely feeds the Campi Flegrei Volcanic District at present day. Obtained viscosities (0.5-3.0 Pa s), mobility (0.1-0.4 g cm3 Pa-1 s-1) and ascent velocity (1.5-6.0 m yr-1) are presented to support geochemical and geophysical observations of Campi Flegrei as a critical volcanic district currently undergoing gradual magma recharge at depth.

Overview of HPCAT and capabilities for studying minerals and various other materials at high-pressure conditions.

High-Pressure Collaborative Access Team (HPCAT) is a synchrotron-based facility located at the Advanced Photon Source (APS). With four online experimental stations and various offline capabilities, HPCAT is focused on providing synchrotron x-ray capabilities for high pressure and temperature research and supporting a broad user community. Overall, the array of online/offline capabilities is described, including some of the recent developments for remote user support and the concomitant impact of the current pandemic. General overview of work done at HPCAT and with a focus on some of the minerals relevant work and supporting capabilities is also discussed. With the impending APS-Upgrade (APS-U), there is a considerable effort within HPCAT to improve and add capabilities. These are summarized briefly for each of the end-stations.

Experimental melting curve of zirconium metal to 37 GPa.

In this report, we present results of high-pressure experiments probing the melt line of zirconium (Zr) up to 37 GPa. This investigation has determined that temperature versus laser power curves provide an accurate method to determine melt temperatures. When this information is combined with the onset of diffuse scattering, which is associated with the melt process, we demonstrate the ability to accurately determine the melt boundary. This presents a reliable method for rapid determination of melt boundary and agrees well with other established techniques for such measurements, as reported in previous works on Zr.

Structural Changes in Liquid Lithium under High Pressure.

We have experimentally studied the effect of compression on the structure of liquid lithium (Li) by multiangle energy dispersive X-ray diffraction in a large-volume cupped-Drickamer-Toroidal cell. The structure factors, s(q), of liquid Li have been successfully determined under an isothermal compression at 600 ± 30 K and at pressures up to 11.5 GPa. The first peak position in s(q) is found to increase with increasing pressure and is showing an obvious slope change starting at ∼7.5 GPa. The slope change is interpreted as a structural change from bcc-like to fcc-like local ordering in liquid Li. At pressures above 8.7 GPa, the liquid Li becomes predominantly fcc-like up to the highest pressure of 11.5 GPa in this study. The observed structural changes in liquid Li are consistent with the recently determined melting curve of Li.

Observation of 9-Fold Coordinated Amorphous TiO2 at High Pressure.

Knowledge of the structure in amorphous dioxides is important in many fields of science and engineering. Here we report new experimental results of high-pressure polyamorphism in amorphous TiO2 (a-TiO2). Our data show that the Ti coordination number (CN) increases from 7.2 ± 0.3 at ∼16 GPa to 8.8 ± 0.3 at ∼70 GPa and finally reaches a plateau at 8.9 ± 0.3 at ≲86 GPa. The evolution of the structural changes under pressure is rationalized by the ratio (γ) of the ionic radius of Ti to that of O. It appears that the CN ≈ 9 plateau correlates with the two 9-fold coordinated polymorphs (cotunnite, Fe2P) with different γ values. This CN-γ relationship is compared with those of a-SiO2 and a-GeO2, displaying remarkably consistent behavior between CN and γ. The unified CN-γ relationship may be generally used to predict the compression behavior of amorphous AO2 compounds under extreme conditions.

Multimode scanning X-ray diffraction microscopy for diamond anvil cell experiments.

We have designed and implemented a new experimental system for fast mapping of crystal structures and other structural features of materials under high pressure at the High Pressure Collaborative Access Team, Sector 16 of the Advanced Photon Source. The system utilizes scanning X-ray diffraction microscopy (SXDM) and is optimized for use with diamond anvil cell devices. In SXDM, the X-ray diffraction (XRD) is collected in a forward scattering geometry from points on a two-dimensional grid by fly-scanning the sample with respect to a micro-focused X-ray beam. The recording of XRD is made during the continuous motion of the sample using a fast (millisecond) X-ray area detector in synchrony with the sample positioners, resulting in a highly efficient data collection for SXDM. A new computer program, X-ray Diffractive Imaging (XDI), has been developed with the SXDM system. The XDI program provides a graphical interface for constructing and displaying the SXDM images in several modes: (1) phase mapping based on structural information, (2) pressure visualization based on the equation of state, (3) microstructural features mapping based on peak shape parameters, and (4) grain size and preferred-orientation based on peak shape parameters. The XDI is a standalone program and can be generally used for displaying SXDM images. Two examples of iron and zirconium samples under high pressure are presented to demonstrate the applications of SXDM.

Real time study of grain enlargement in zirconium under room-temperature compression across the α to ω phase transition.

We report a synchrotron Laue diffraction study on the microstructure evolution in zirconium (Zr) as it undergoes a pressure-driven structural phase transformation, using a recently developed real time scanning x-ray microscopy technique. Time resolved characterizations of microstructure under high pressure show that Zr exhibits a grain enlargement across the α-Zr to ω-Zr structural phase transition at room-temperature, with nucleation and growth of ω-Zr crystals observed from initially a nano-crystalline aggregate of α-Zr. The observed grain enlargement is unusual since the enlargement processes typically require substantially high temperature to overcome the activation barriers for forming and moving of grain boundaries. Possible mechanisms for the grain enlargement are discussed.

A CO2 laser heating system for in situ high pressure-temperature experiments at HPCAT.

We present a CO2 laser heating setup for synchrotron x-ray diffraction inside a diamond anvil cell, situated at HPCAT (Sector 16, Advanced Photon Source, Argonne National Lab, Illinois, USA), which is modular and portable between the HPCAT experiment hutches. The system allows direct laser heating of wide bandgap insulating materials to thousands of degrees at static high pressures up to the Mbar regime. Alignment of the focused CO2 laser spot is performed using a mid-infrared microscope, which addressed past difficulties with aligning the invisible radiation. The implementation of the mid-infrared microscope alongside a mirror pinhole spatial filter system allows precise alignment of the heating laser spot and optical pyrometry measurement location to the x-ray probe. A comparatively large heating spot (∼50 µm) relative to the x-ray beam (<10 µm) reduces the risk of temperature gradients across the probed area. Each component of the heating system and its diagnostics have been designed with portability in mind and compatibility with the various experimental hutches at the HPCAT beamlines. We present measurements on ZrO2 at 5.5 GPa which demonstrate the improved room-temperature diffraction data quality afforded by annealing with the CO2 laser. We also present in situ measurements at 5.5 GPa up to 2800 K in which we do not observe the postulated fluorite ZrO2 structure, in agreement with recent findings.

Surprising Stability of Cubane under Extreme Pressure.

The chemical stability of solid cubane under high-pressure was examined with in situ Raman spectroscopy and synchrotron powder X-ray diffraction (PXRD) in a diamond anvil cell (DAC) up to 60 GPa. The Raman modes associated with solid cubane were assigned by comparing experimental data with calculations based on density functional perturbation theory, and low-frequency lattice modes are reported for the first time. The equation of state of solid cubane derived from the PXRD measurements taken during compression gives a bulk modulus of 14.5(2) GPa. In contrast with previous work and chemical intuition, PXRD and Raman data indicate that solid cubane exhibits anomalously large stability under extreme pressure, despite its immensely strained 90° C-C-C bond angles.

Microstructures define melting of molybdenum at high pressures.

High-pressure melting anchors the phase diagram of a material, revealing the effect of pressure on the breakdown of the ordering of atoms in the solid. An important case is molybdenum, which has long been speculated to undergo an exceptionally steep increase in melting temperature when compressed. On the other hand, previous experiments showed nearly constant melting temperature as a function of pressure, in large discrepancy with theoretical expectations. Here we report a high-slope melting curve in molybdenum by synchrotron X-ray diffraction analysis of crystalline microstructures, generated by heating and subsequently rapidly quenching samples in a laser-heated diamond anvil cell. Distinct microstructural changes, observed at pressures up to 130 gigapascals, appear exclusively after melting, thus offering a reliable melting criterion. In addition, our study reveals a previously unsuspected transition in molybdenum at high pressure and high temperature, which yields highly textured body-centred cubic nanograins above a transition temperature.

The laser micro-machining system for diamond anvil cell experiments and general precision machining applications at the High Pressure Collaborative Access Team.

We have designed and constructed a new system for micro-machining parts and sample assemblies used for diamond anvil cells and general user operations at the High Pressure Collaborative Access Team, sector 16 of the Advanced Photon Source. The new micro-machining system uses a pulsed laser of 400 ps pulse duration, ablating various materials without thermal melting, thus leaving a clean edge. With optics designed for a tight focus, the system can machine holes any size larger than 3 µm in diameter. Unlike a standard electrical discharge machining drill, the new laser system allows micro-machining of non-conductive materials such as: amorphous boron and silicon carbide gaskets, diamond, oxides, and other materials including organic materials such as polyimide films (i.e., Kapton). An important feature of the new system is the use of gas-tight or gas-flow environmental chambers which allow the laser micro-machining to be done in a controlled (e.g., inert gas) atmosphere to prevent oxidation and other chemical reactions in air sensitive materials. The gas-tight workpiece enclosure is also useful for machining materials with known health risks (e.g., beryllium). Specialized control software with a graphical interface enables micro-machining of custom 2D and 3D shapes. The laser-machining system was designed in a Class 1 laser enclosure, i.e., it includes laser safety interlocks and computer controls and allows for routine operation. Though initially designed mainly for machining of the diamond anvil cell gaskets, the laser-machining system has since found many other micro-machining applications, several of which are presented here.

New developments in laser-heated diamond anvil cell with in situ synchrotron x-ray diffraction at High Pressure Collaborative Access Team.

An overview of the in situ laser heating system at the High Pressure Collaborative Access Team, with emphasis on newly developed capabilities, is presented. Since its establishment at the beamline 16-ID-B a decade ago, laser-heated diamond anvil cell coupled with in situ synchrotron x-ray diffraction has been widely used for studying the structural properties of materials under simultaneous high pressure and high temperature conditions. Recent developments in both continuous-wave and modulated heating techniques have been focusing on resolving technical issues of the most challenging research areas. The new capabilities have demonstrated clear benefits and provide new opportunities in research areas including high-pressure melting, pressure-temperature-volume equations of state, chemical reaction, and time resolved studies.