Direct synthesis of nanopatterned epitaxial graphene on silicon carbide.

This article introduces a straightforward approach for the direct synthesis of transfer-free, nanopatterned epitaxial graphene on silicon carbide on silicon substrates. A catalytic alloy tailored to optimal SiC graphitization is pre-patterned with common lithography and lift-off techniques to form planar graphene structures on top of an unpatterned SiC layer. This method is compatible with both electron-beam lithography and UV-lithography, and graphene gratings down to at least ∼100 nm width/space can be realized at the wafer scale. The minimum pitch is limited by the flow of the metal catalyst during the liquid-phase graphitization process. We expect that the current pitch resolution could be further improved by optimizing the metal deposition method and lift-off process.

Designing concentric nanoparticles for surface-enhanced light-matter interaction in the mid-infrared.

Nanosized particles with high responsivity in the infrared spectrum are of great interest for biomedical applications. We derive a closed-form expression for the polarizability of nanoparticles made of up to three concentric nanolayers consisting of a frequency dependent polar dielectric core, low permittivity dielectric spacer shell and conductive graphene outer shell, using the electrostatic Mie theory in combination with conductive layer in a dipole approximation. We use the obtained formula to investigate SiC, GaN and hBN as core materials, and graphene as conductive shell, separated by a low-permittivity dielectric spacer. Three-layer nanoparticles demonstrate up to a 12-fold increased mid-infrared (MIR) absorption as compared to their monolithic polar dielectrics, and up to 1.7 as compared to two-layer (no spacer) counterparts. They also show orders of magnitude enhancement of the nanoparticle scattering efficiency. The enhancement originates from the phonon-plasmon hybridization thanks to the graphene and polar dielectric combination, assisted by coupling via the low permittivity spacer, resulting in the splitting of the dielectric resonance into two modes. Those modes extend beyond the dielectric's Reststrahlen band and can be tuned by tailoring the nanoparticles characteristics as they can be easily calculated through the closed-form expression. Nanoparticles with dual band resonances and enhanced absorption and scattering efficiencies in the MIR are of high technological interest for biomedical applications, such as surface -enhanced vibrational spectroscopies allowing simultaneous imaging and spectroscopy of samples, as well as assisting guided drug delivery.

MoS2/Epitaxial graphene layered electrodes for solid-state supercapacitors.

The potential of transition metal dichalcogenides such as MoS2 for energy storage has been significantly limited so far by the lack of conductivity and structural stability. Employing highly conductive, graphitic materials in combination with transition metal dichalcogenides can address this gap. Here, we explore the use of a layered electrode structure for solid-state supercapacitors, made of MoS2 and epitaxial graphene (EG) on cubic silicon carbide for on-silicon energy storage. We show that the energy storage of the solid-state supercapacitors can be significantly increased by creating layered MoS2/graphene electrodes, yielding a substantial improvement as compared to electrodes using either EG or MoS2 alone. We conclude that the conductivity of EG and the growth morphology of MoS2 on graphene play an enabling role in the successful use of transition metal dichalcogenides for on-chip energy storage.

Electron effective attenuation length in epitaxial graphene on SiC.

The inelastic mean free path (IMFP) for carbon-based materials is notoriously challenging to model, and moving from bulk materials to 2D materials may exacerbate this problem, making the accurate measurements of IMFP in 2D carbon materials critical. The overlayer-film method is a common experimental method to estimate IMFP by measuring electron effective attenuation length (EAL). This estimation relies on an assumption that elastic scattering effects are negligible. We report here an experimental measurement of electron EAL in epitaxial graphene on SiC using photoelectron spectroscopy over an electron kinetic energy range of 50-1150 eV. We find a significant effect of the interface between the 2D carbon material and the substrate, indicating that the attenuation length in the so-called 'buffer layer' is smaller than for free-standing graphene. Our results also suggest that the existing models for estimating IMFPs may not adequately capture the physics of electron interactions in 2D materials.

Quasi free-standing epitaxial graphene fabrication on 3C-SiC/Si(111).

Growing graphene on SiC thin films on Si is a cheaper alternative to the growth on bulk SiC, and for this reason it has been recently intensively investigated. Here we study the effect of hydrogen intercalation on epitaxial graphene obtained by high temperature annealing on 3C-SiC/Si(111) in ultra-high vacuum. By using a combination of core-level photoelectron spectroscopy, low energy electron diffraction, and near-edge x-ray absorption fine structure (NEXAFS) we find that hydrogen saturates the Si atoms at the topmost layer of the substrate, leading to free-standing graphene on 3C-SiC/Si(111). The intercalated hydrogen fully desorbs after heating the sample at 850 °C and the buffer layer appears again, similar to what has been reported for bulk SiC. However, the NEXAFS analysis sheds new light on the effect of hydrogen intercalation, showing an improvement of graphene's flatness after annealing in atomic H at 600 °C. These results provide new insight into free-standing graphene fabrication on SiC/Si thin films.

Epitaxial graphene growth on FIB patterned 3C-SiC nanostructures on Si (111): reducing milling damage.

Epitaxial growth of graphene on SiC is a scalable procedure that does not require any further transfer step, making this an ideal platform for graphene nanostructure fabrication. Focused ion beam (FIB) is a very promising tool for exploring the reduction of the lateral dimension of graphene on SiC to the nanometre scale. However, exposure of graphene to the Ga+ beam causes significant surface damage through amorphisation and contamination, preventing epitaxial graphene growth. In this paper we demonstrate that combining a protective silicon layer with FIB patterning implemented prior to graphene growth can significantly reduce the damage associated with FIB milling. Using this approach, we successfully achieved graphene growth over 3C-SiC/Si FIB patterned nanostructures.

A thin film approach for SiC-derived graphene as an on-chip electrode for supercapacitors.

We designed a nickel-assisted process to obtain graphene with sheet resistance as low as 80 Ω square(-1) from silicon carbide films on Si wafers with highly enhanced surface area. The silicon carbide film acts as both a template and source of graphitic carbon, while, simultaneously, the nickel induces porosity on the surface of the film by forming silicides during the annealing process which are subsequently removed. As stand-alone electrodes in supercapacitors, these transfer-free graphene-on-chip samples show a typical double-layer supercapacitive behaviour with gravimetric capacitance of up to 65 F g(-1). This work is the first attempt to produce graphene with high surface area from silicon carbide thin films for energy storage at the wafer-level and may open numerous opportunities for on-chip integrated energy storage applications.

Graphitized silicon carbide microbeams: wafer-level, self-aligned graphene on silicon wafers.

Currently proven methods that are used to obtain devices with high-quality graphene on silicon wafers involve the transfer of graphene flakes from a growth substrate, resulting in fundamental limitations for large-scale device fabrication. Moreover, the complex three-dimensional structures of interest for microelectromechanical and nanoelectromechanical systems are hardly compatible with such transfer processes. Here, we introduce a methodology for obtaining thousands of microbeams, made of graphitized silicon carbide on silicon, through a site-selective and wafer-scale approach. A Ni-Cu alloy catalyst mediates a self-aligned graphitization on prepatterned SiC microstructures at a temperature that is compatible with silicon technologies. The graphene nanocoating leads to a dramatically enhanced electrical conductivity, which elevates this approach to an ideal method for the replacement of conductive metal films in silicon carbide-based MEMS and NEMS devices.

Epitaxial graphene growth on cubic silicon carbide on silicon with high temperature neutron reflectometry: an operando study.

The growth of graphene on silicon carbide on silicon offers a very attractive route towards novel wafer-scale photonic and electronic devices that are easy to fabricate and can be integrated in silicon manufacturing. Using a Ni/Cu catalyst for the epitaxial growth of graphene has been successful in the mitigation of the very defective nature of the underlying silicon carbide on silicon, leading to a consistent graphene coverage over large scales. A more detailed understanding of this growth mechanism is warranted in order to further optimise the catalyst composition, preferably via the use of operando characterization measurements. Here, we report in situ neutron reflectometry measurements of (Ni, Cu)/SiC films on silicon wafers, annealed from room temperature to 1100 °C, which initiates graphene formation at the buried (Ni, Cu)/SiC interface. Detailed modelling of the high temperature neutron reflectometry and corresponding scattering length density profiles yield insights into the distinct physical mechanisms within the different temperature regimes. The initially smooth solid metallic layers undergo intermixing and roughening transitions at relatively low temperatures below 500 °C, and then metal silicides begin to form above 600 °C from interfacial reactions with the SiC, releasing atomic carbon. At the highest temperature range of 600-1100 °C, the low neutron scattering length density at high temperature is consistent with a silicon-rich, liquid surface phase corresponding to molten nickel silicides and copper. This liquid catalyst layer promotes the liquid-phase epitaxial growth of a graphene layer by precipitating the excess carbon available at the SiC/metal interface.

Cryogenic plasmas for controlled processing of nanoporous materials.

Plasma processing at cryogenic temperatures tremendously suppresses the depth penetration of plasma radical species within nanoporous materials. We demonstrate that this confining effect is surprisingly unrelated to changes in the phase diffusivity of radical species gas, but is determined by the increase of the sticking coefficient and the radical recombination and reaction factors, favoring an early irreversible surface adsorption of the plasma radical species.

Non-invasive on-skin sensors for brain machine interfaces with epitaxial graphene.

Objective. Brain-machine interfaces are key components for the development of hands-free, brain-controlled devices. Electroencephalogram (EEG) electrodes are particularly attractive for harvesting the neural signals in a non-invasive fashion.Approach.Here, we explore the use of epitaxial graphene (EG) grown on silicon carbide on silicon for detecting the EEG signals with high sensitivity.Main results and significance.This dry and non-invasive approach exhibits a markedly improved skin contact impedance when benchmarked to commercial dry electrodes, as well as superior robustness, allowing prolonged and repeated use also in a highly saline environment. In addition, we report the newly observed phenomenon of surface conditioning of the EG electrodes. The prolonged contact of the EG with the skin electrolytes functionalize the grain boundaries of the graphene, leading to the formation of a thin surface film of water through physisorption and consequently reducing its contact impedance more than three-fold. This effect is primed in highly saline environments, and could be also further tailored as pre-conditioning to enhance the performance and reliability of the EG sensors.

Enhanced Absorption with Graphene-Coated Silicon Carbide Nanowires for Mid-Infrared Nanophotonics.

The mid-infrared (MIR) is an exciting spectral range that also hosts useful molecular vibrational fingerprints. There is a growing interest in nanophotonics operating in this spectral range, and recent advances in plasmonic research are aimed at enhancing MIR infrared nanophotonics. In particular, the design of hybrid plasmonic metasurfaces has emerged as a promising route to realize novel MIR applications. Here we demonstrate a hybrid nanostructure combining graphene and silicon carbide to extend the spectral phonon response of silicon carbide and enable absorption and field enhancement of the MIR photon via the excitation and hybridization of surface plasmon polaritons and surface phonon polaritons. We combine experimental methods and finite element simulations to demonstrate enhanced absorption of MIR photons and the broadening of the spectral resonance of graphene-coated silicon carbide nanowires. We also indicate subwavelength confinement of the MIR photons within a thin oxide layer a few nanometers thick, sandwiched between the graphene and silicon carbide. This intermediate shell layer is characteristically obtained using our graphitization approach and acts as a coupling medium between the core and outer shell of the nanowires.

Zeolite-inspired low-k dielectrics overcoming limitations of zeolite films.

Spin-on zeolite films deposited from Silicalite-1 nanocrystal suspensions prepared by hydrothermal treatment of clear solutions have the required properties for insulating media in microelectronics. However, on the scale of the feature sizes in on-chip interconnects of a few tens of nanometers, their homogeneity is still insufficient. We discovered a way to overcome this problem by combining the advantages of the clear solution approach of Silicalite-1 synthesis with a sol-gel approach. A combination of tetraethyl orthosilicate and methyltrimethoxysilane silica sources was hydrolyzed and cocondensed in the presence of an aqueous tetraalkylammonium hydroxide template. The resulting suspension of nanoparticles of a few nanometers in size together with residual oligomeric silica species were spun onto support. The final zeolite-inspired low-k films (ZLK) with respect to pore size and homogeneity satisfied all requirements and presented excellent hydrophobicity, stiffness, and dielectric constant. The size and content of initially formed nanoparticles and the spatial hindrance promoted by occluded tetraalkylammonium molecules were found to be crucial elements in the definition of the final pore network.

Reaction of trimethylchlorosilane in spin-on Silicalite-1 zeolite film.

We present a study on the hydrophobization of spin-on Silicalite-1 zeolite films through silylation with trimethylchlorosilane. Microporous and micro-mesoporous Silicalite-1 films were synthesized by spin coating of suspensions of Silicalite-1 nanozeolite crystallized for different times. Ellipsometric porosimetry with toluene and water adsorbates reveals that silylation decreases the porosity and makes the films hydrophobic. The decrease in porosity depends on the exposed surface area in the pores. Water contact angle measurements confirm the hydrophobicity. Fourier transform infrared spectroscopy reveals that the trimethylsilyl groups are chemisorbed selectively on isolated silanols and less on geminal and vicinal silanols due to steric limitations. Time-of-flight secondary-ion mass spectroscopy and in situ ellipsometry analysis of the reaction kinetics show that the silylation is a bulk process occurring in the absence of diffusion limitation. Electrical current leakage on films decreases upon silylation. Silylation with trimethylchlorosilane is shown to be an effective hydrophobization method for spin-on Silicalite-1 zeolite films.

Characterization of a molecular sieve coating using ellipsometric porosimetry.

Ellipsometric porosimetry was used to determine the adsorption isotherms of toluene, methanol, and water on b-oriented Silicalite-1 coatings with a thickness of less than ca. 250 nm and to obtain adsorption kinetics. The adsorption isotherms are of sufficient quality to reveal several aspects of the pore structure such as the adsorbate capacity and the adsorbate/framework affinity. The use of a combination of different molecular probes in ellipsometric porosimetry to elucidate the molecular accessibility of Silicalite-1 pores is demonstrated. It is shown that ellipsometric porosimetry is an appropriate technique for probing the influence of aging of the Silicalite-1 coating and of planarization polishing on the porosity, pore accessibility, and adsorbate/framework affinity.