Development of Silk Fibroin Scaffolds for Vascular Repair.

Silk fibroin (SF) is a biocompatible natural protein with excellent mechanical characteristics. SF-based biomaterials can be structured using a number of techniques, allowing the tuning of materials for specific biomedical applications. In this study, SF films, porous membranes, and electrospun membranes were produced using solvent-casting, salt-leaching, and electrospinning methodologies, respectively. SF-based materials were subjected to physicochemical and biological characterizations to determine their suitability for tissue regeneration applications. Mechanical analysis showed stress-strain curves of brittle materials in films and porous membranes, while electrospun membranes featured stress-strain curves typical of ductile materials. All samples showed similar chemical composition, melting transition, hydrophobic behavior, and low cytotoxicity levels, regardless of their architecture. Finally, all of the SF-based materials promote the proliferation of human umbilical vein endothelial cells (HUVECs). These findings demonstrate the different relationship between HUVEC behavior and the SF sample's topography, which can be taken advantage of for the design of vascular implants.

Iridium thin-film coatings for the BabyIAXO hybrid X-ray optic.

Reflective coatings are an essential feature of X-ray telescopes. Their overall performance relies heavily on substrate compatibility and how well they conform to the optics assembly processes. We use X-ray reflectometry (XRR) to demonstrate the compatibility of shaping flat substrates coated with iridium, and show that specular and nonspecular reflectance before and after shaping is on par with traditional hot-slumped coated substrates. From 1.487 and 8.048keV measurements, we find that the substrates have rms roughness of 0.38nm and magnetron sputtered iridium deposits with rms surface roughness of 0.27-0.35nm. A hydrocarbon overlayer from atmospheric contamination is present with a thickness of 1.4-1.6nm and a density of 1.2-1.6g/cm3. Both the traditional hot slumped and the flat substrates undergoing post-coating shaping have a similar characteristic surface morphology and are equally well-suited for use with X-ray optics. Finally, we demonstrate by simulation the improved effective area achieved by using a low-Z overlayer, and illustrate the performance of a hybrid optic coated with optimized bilayers for a Primakoff axion spectrum emitted by the sun.

Nanostructured scaffolds based on bioresorbable polymers and graphene oxide induce the aligned migration and accelerate the neuronal differentiation of neural stem cells.

Within the field of neural tissue engineering, there is a huge need for the development of materials that promote the adhesion, aligned migration and differentiation of stem cells into neuronal and supportive glial cells. In this study, we have fabricated bioresorbable elastomeric scaffolds combining an ordered nanopatterned topography together with a surface functionalization with graphene oxide (GO) in mild conditions. These scaffolds allowed the attachment of murine neural stem cells (NSCs) without the need of any further coating of its surface with extracellular matrix adhesion proteins. The NSCs were able to give rise to both immature neurons and supporting glial cells over the nanostructured scaffolds in vitro, promoting their aligned migration in cell clusters following the nanostructured grooves. This system has the potential to reestablish spatially oriented neural precursor cell connectivity, constituting a promising tool for future cellular therapy including nerve tissue regeneration.

BDNF and NT3 Reprogram Human Ectomesenchymal Dental Pulp Stem Cells to Neurogenic and Gliogenic Neural Crest Progenitors Cultured in Serum-Free Medium.

BACKGROUND/AIMS: Human Dental Pulp Stem Cells (hDPSCs) are one of the most promising types of cells to regenerate nerve tissues. Standard DMEM+10% fetal bovine serum (FBS) culture medium allows a fast expansion of hDPSC as a surface-adherent cell monolayer. However, the use of FBS also compromises the clinical use of these protocols, and its longterm presence favors hDPSCs differentiation toward mesenchymal cell-derived lineages, at the expense of a reduced capability to generate neural cells. The objective of this work was to characterize the role of neurotrophin signaling on hDPSCs using a serum-free culture protocol, and to assess the neurogenic and gliogenic capacity of hDPSCs for future nerve tissue bioengineering and regeneration. METHODS: We compared the different expression of neurotrophin receptors by RT-PCR, Q-PCR, and IF of hDPSCs cultured with different growth media in the presence or absence of serum. Moreover, we assessed the response of hDPSCs to stimulation of neurotransmitter receptors by live cell calcium imaging under these different media. Finally, we compared the osteogenic potential of hDPSCs by Alizarin red staining, and the differentiation to gliogenic/neurogenic fates by immunostaining for Schwann lineage and neuronal lineage markers. We tested a commercial serum-free medium designed for the growth of mesenchymal stem cells: StemPro MSCTM (STP). RESULTS: hDPSCs cultured in STP generated small non-adherent floating dentospheres that showed very low proliferation rates, in contrast to standard FBS-containing medium. We found that hDPSCs grown in STP conditions overexpressed neurotrophin receptor genes NTRK2 (TrkB) and NTRK3 (TrkC). Interestingly, the stimulation of these receptors by adding their respective ligands BDNF and NT-3 to STP medium enhanced the neural crest (NC) progenitor features of cultured hDPSCs. We observed a 10 to 100-fold increase of migratory NC cell markers HNK1 and P75NTR, and a significant overexpression of pluripotency core factors SOX2, OCT4 and NANOG. Moreover, hDPSCs cultured in BDNF/NT-3 supplemented STP showed a largely increased potential to differentiate towards neuronal and Schwann glial lineage cells, assessed by positive immunostaining for DCX, NeuN and S100ß, p75NTR markers, respectively. CONCLUSION: Our results demonstrate that the use of BDNF and NT-3 combined with STP induced the partial reprogramming of ectomesenchymal hDPSCs to generate early NC progenitor cells, which are far more competent for neuronal and glial differentiation than hDPSCs grown in the presence of FBS.

Multifunctional curcumin-based polymer coating: A promising platform against bacteria, inflammation and coagulation.

The extensive use of polymers in the medical field has facilitated the development of various devices and implants, contributing to the restoration of organ function. However, despite their advantages such as biocompatibility and robustness, these materials often face challenges like bacterial contamination and subsequent inflammation, leading to implant-associated infections (IAI). Integrating implants effectively is crucial to prevent bacterial colonization and reduce inflammatory responses. To overcome these major issues, surface chemical modifications have been extensively explored. Indeed, click chemistry, and particularly, copper (I)-catalyzed azide-alkyne cycloaddition (CuAAC) reaction has emerged as a promising approach for surface functionalization without affecting material bulk properties. Curcumin, known for its diverse biological activities, suffers from low solubility and stability. To enhance its bioavailability, bioconjugation strategy has garnered attention in recent years. This study represents pioneering work in immobilizing curcumin derivative onto polyethylene terephthalate (PET) surfaces, aiming to combat bacterial adhesion, inflammation and coagulation. Before curcumin derivative bioconjugation, a fluorophore, dansyl derivative, was employed in order to monitor and determine the efficiency of the proposed methodology. Previous surface chemical modifications were required for the immobilization of both dansyl and curcumin derivatives. Ultraviolet-Visible (UV-Vis) demonstrated the amidation functionalization of PET surface. Other surface characterization techniques including X-ray Photoelectron Spectroscopy (XPS), Attenuated Total Reflectance Fourier Transformed Infrared (ATR-FTIR), Scanning Electron Microscopy (SEM) and contact angle, among others, confirmed also the conjugation of both dansyl and curcumin derivatives. On the other hand, different biological assays corroborated that curcumin derivative immobilized PET surfaces do not exhibit cytotoxicity effect. Additionally, corresponding inflammation test were performed, indicating that these polymeric surfaces do not produce inflammation and, when curcumin derivative is immobilized, they decrease the inflammation marker level (IL-6). Moreover, the bacterial growth of both Gram positive and Gram negative bacteria were measured, demonstrating that the immobilization of curcumin derivative on PET provided antibacterial properties to the material. Finally, hemolysis rate analysis and whole blood clotting assay demonstrated the antithrombogenic effect of PET-Cur surfaces as well as no hemolysis concern in the fabricated functional surfaces.

Electroactive Materials Surface Charge Impacts Neuron Viability and Maturation in 2D Cultures.

Since neurons were first cultured outside a living organism more than a century ago, a number of experimental techniques for their in vitro maintenance have been developed. These methods have been further adapted and refined to study specific neurobiological processes under controlled experimental conditions. Despite their limitations, the simplicity and visual accessibility of 2D cultures have enabled the study of the effects of trophic factors, adhesion molecules, and biophysical stimuli on neuron function and morphology. Nevertheless, the impact of fundamental properties of the surfaces to which neurons adhere when cultured in vitro has not been sufficiently considered. Here, we used an electroactive polymer with different electric poling states leading to different surface charges to evaluate the impact of the net electric surface charge on the behavior of primary neurons. Average negative and positive surface charges promote increased metabolic activity and enhance the maturation of primary neurons, demonstrating the relevance of considering the composition and electric charge of the culture surfaces. These findings further pave the way for the development of novel therapeutic strategies for the regeneration of neural tissues, particularly based on dynamic surface charge variation that can be induced in the electroactive films through mechanical solicitation.

Enhanced Adipogenic Differentiation of Human Dental Pulp Stem Cells in Enzymatically Decellularized Adipose Tissue Solid Foams.

Engineered 3D human adipose tissue models and the development of physiological human 3D in vitro models to test new therapeutic compounds and advance in the study of pathophysiological mechanisms of disease is still technically challenging and expensive. To reduce costs and develop new technologies to study human adipogenesis and stem cell differentiation in a controlled in vitro system, here we report the design, characterization, and validation of extracellular matrix (ECM)-based materials of decellularized human adipose tissue (hDAT) or bovine collagen-I (bCOL-I) for 3D adipogenic stem cell culture. We aimed at recapitulating the dynamics, composition, and structure of the native ECM to optimize the adipogenic differentiation of human mesenchymal stem cells. hDAT was obtained by a two-enzymatic step decellularization protocol and post-processed by freeze-drying to produce 3D solid foams. These solid foams were employed either as pure hDAT, or combined with bCOL-I in a 3:1 proportion, to recreate a microenvironment compatible with stem cell survival and differentiation. We sought to investigate the effect of the adipogenic inductive extracellular 3D-microenvironment on human multipotent dental pulp stem cells (hDPSCs). We found that solid foams supported hDPSC viability and proliferation. Incubation of hDPSCs with adipogenic medium in hDAT-based solid foams increased the expression of mature adipocyte LPL and c/EBP gene markers as determined by RT-qPCR, with respect to bCOL-I solid foams. Moreover, hDPSC capability to differentiate towards adipocytes was assessed by PPAR-γ immunostaining and Oil-red lipid droplet staining. We found out that both hDAT and mixed 3:1 hDAT-COL-I solid foams could support adipogenesis in 3D-hDPSC stem cell cultures significantly more efficiently than solid foams of bCOL-I, opening the possibility to obtain hDAT-based solid foams with customized properties. The combination of human-derived ECM biomaterials with synthetic proteins can, thus, be envisaged to reduce fabrication costs, thus facilitating the widespread use of autologous stem cells and biomaterials for personalized medicine.

Probing the axion-nucleon coupling with the next generation of axion helioscopes.

A finite axion-nucleon coupling, nearly unavoidable for QCD axions, leads to the production of axions via the thermal excitation and subsequent de-excitation of 57 Fe isotopes in the sun. We revise the solar bound on this flux adopting the up to date emission rate, and investigate the sensitivity of the proposed International Axion Observatory IAXO and its intermediate stage BabyIAXO to detect these axions. We compare different realistic experimental options and discuss the model dependence of the signal. Already BabyIAXO has sensitivity far beyond previous solar axion searches via the nucleon coupling and IAXO can improve on this by more than an order of magnitude.

Development and evaluation of different electroactive poly(vinylidene fluoride) architectures for endothelial cell culture.

Tissue engineering (TE) aims to develop structures that improve or even replace the biological functions of tissues and organs. Mechanical properties, physical-chemical characteristics, biocompatibility, and biological performance of the materials are essential factors for their applicability in TE. Poly(vinylidene fluoride) (PVDF) is a thermoplastic polymer that exhibits good mechanical properties, high biocompatibility and excellent thermal properties. However, PVDF structuring, and the corresponding processing methods used for its preparation are known to significantly influence these characteristics. In this study, doctor blade, salt-leaching, and electrospinning processing methods were used to produce PVDF-based structures in the form of films, porous membranes, and fiber scaffolds, respectively. These PVDF scaffolds were subjected to a variety of characterizations and analyses, including physicochemical analysis, contact angle measurement, cytotoxicity assessment and cell proliferation. All prepared PVDF scaffolds are characterized by a mechanical response typical of ductile materials. PVDF films displayed mostly vibration modes for the a-phase, while the remaining PVDF samples were characterized by a higher content of electroactive ß-phase due the low temperature solvent evaporation during processing. No significant variations have been observed between the different PVDF membranes with respect to the melting transition. In addition, all analysed PVDF samples present a hydrophobic behavior. On the other hand, cytotoxicity assays confirm that cell viability is maintained independently of the architecture and processing method. Finally, all the PVDF samples promote human umbilical vein endothelial cells (HUVECs) proliferation, being higher on the PVDF film and electrospun randomly-oriented membranes. These findings demonstrated the importance of PVDF topography on HUVEC behavior, which can be used for the design of vascular implants.

Vasculogenesis from Human Dental Pulp Stem Cells Grown in Matrigel with Fully Defined Serum-Free Culture Media.

The generation of vasculature is one of the most important challenges in tissue engineering and regeneration. Human dental pulp stem cells (hDPSCs) are some of the most promising stem cell types to induce vasculogenesis and angiogenesis as they not only secrete vascular endothelial growth factor (VEGF) but can also differentiate in vitro into both endotheliocytes and pericytes in serum-free culture media. Moreover, hDPSCs can generate complete blood vessels containing both endothelial and mural layers in vivo, upon transplantation into the adult brain. However, many of the serum free media employed for the growth of hDPSCs contain supplements of an undisclosed composition. This generates uncertainty as to which of its precise components are necessary and which are dispensable for the vascular differentiation of hDPSCs, and also hinders the transfer of basic research findings to clinical cell therapy. In this work, we designed and tested new endothelial differentiation media with a fully defined composition using standard basal culture media supplemented with a mixture of B27, heparin and growth factors, including VEGF-A165 at different concentrations. We also optimized an in vitro Matrigel assay to characterize both the ability of hDPSCs to differentiate to vascular cells and their capacity to generate vascular tubules in 3D cultures. The description of a fully defined serum-free culture medium for the induction of vasculogenesis using human adult stem cells highlights its potential as a relevant innovation for tissue engineering applications. In conclusion, we achieved efficient vasculogenesis starting from hDPSCs using serum-free culture media with a fully defined composition, which is applicable for human cell therapy purposes.

Wnt-3a Induces Epigenetic Remodeling in Human Dental Pulp Stem Cells.

Dental pulp stem cells (DPSCs) from adult teeth show the expression of a very complete repertoire of stem pluripotency core factors and a high plasticity for cell reprogramming. Canonical Wnt and Notch signaling pathways regulate stemness and the expression of pluripotency core factors in DPSCs, and even very short-term (48 h) activations of the Wnt pathway induce a profound remodeling of DPSCs at the physiologic and metabolic levels. In this work, DPSC cultures were exposed to treatments modulating Notch and Wnt signaling, and also induced to differentiate to osteo/adipocytes. DNA methylation, histone acetylation, histone methylation, and core factor expression levels where assessed by mass spectroscopy, Western blot, and qPCR. A short-term activation of Wnt signaling by WNT-3A induced a genomic DNA demethylation, and increased histone acetylation and histone methylation in DPSCs. The efficiency of cell reprogramming methods relies on the ability to surpass the epigenetic barrier, which determines cell lineage specificity. This study brings important information about the regulation of the epigenetic barrier by Wnt signaling in DPSCs, which could contribute to the development of safer and less aggressive reprogramming methodologies with a view to cell therapy.

Wnt/ß-Catenin Regulates the Activity of Epiprofin/Sp6, SHH, FGF, and BMP to Coordinate the Stages of Odontogenesis.

BACKGROUND: We used an in vitro tooth development model to investigate the effects of overactivation of the Wnt/ß-catenin pathway during odontogenesis by bromoindirubin oxime reagent (BIO), a specific inhibitor of GSK-3 activity. RESULTS: Overactivating the Wnt/ß-catenin pathway at tooth initiation upregulated and ectopically expressed the epithelial markers Sonic Hedgehog (Shh), Epiprofin (Epfn), and Fibroblast growth factor8 (Fgf8), which are involved in the delimitation of odontogenic fields in the oral ectoderm. This result indicated an ectopic extension of the odontogenic potential. During tooth morphogenesis, Fibroblast growth factor4 (Fgf4), Fibroblast growth factor10 (Fgf10), Muscle segment homeobox 1 (Msx-1), Bone Morphogenetic protein 4 (Bmp4), and Dickkopf WNT signaling pathway inhibitor 1 (Dkk-1) were overexpressed in first molars cultured with BIO. Conversely, the expression levels of Wingless integration site 10b (Wnt-10b) and Shh were reduced. Additionally, the odontoblast differentiation markers Nestin and Epfn showed ectopic overexpression in the dental mesenchyme of BIO-treated molars. Moreover, alkaline phosphatase activity increased in the dental mesenchyme, again suggesting aberrant, ectopic mesenchymal cell differentiation. Finally, Bmp4 downregulated Epfn expression during dental morphogenesis. CONCLUSIONS: We suggest the presence of a positive feedback loop wherein Epfn and ß-catenin activate each other. The balance of the expression of these two molecules is essential for proper tooth development. We propose a possible link between Wnt, Bmp, and Epfn that would critically determine the correct patterning of dental cusps and the differentiation of odontoblasts and ameloblasts.

Dental pulp stem cells as a multifaceted tool for bioengineering and the regeneration of craniomaxillofacial tissues.

Dental pulp stem cells, or DPSC, are neural crest-derived cells with an outstanding capacity to differentiate along multiple cell lineages of interest for cell therapy. In particular, highly efficient osteo/dentinogenic differentiation of DPSC can be achieved using simple in vitro protocols, making these cells a very attractive and promising tool for the future treatment of dental and periodontal diseases. Among craniomaxillofacial organs, the tooth and salivary gland are two such cases in which complete regeneration by tissue engineering using DPSC appears to be possible, as research over the last decade has made substantial progress in experimental models of partial or total regeneration of both organs, by cell recombination technology. Moreover, DPSC seem to be a particularly good choice for the regeneration of nerve tissues, including injured or transected cranial nerves. In this context, the oral cavity appears to be an excellent testing ground for new regenerative therapies using DPSC. However, many issues and challenges need yet to be addressed before these cells can be employed in clinical therapy. In this review, we point out some important aspects on the biology of DPSC with regard to their use for the reconstruction of different craniomaxillofacial tissues and organs, with special emphasis on cranial bones, nerves, teeth, and salivary glands. We suggest new ideas and strategies to fully exploit the capacities of DPSC for bioengineering of the aforementioned tissues.