RESUMO
In the present study, an investigation was conducted on the removal of polydiallyldimethylammonium chloride-acrylic-acrylamide-hydroxyethyl acrylate/ZnO nanocomposites (PDM/ZnO) through biodegradation and Fenton process coupled treatments. As revealed from the results of the chemical oxygen demand, the total organic carbon, the biochemical oxygen demand and the CO2 production analysis, PDM/ZnO could be partially biodegraded. The optimal initial pH, the mixed liquid suspended solids concentration and additional carbon source (glucose) dosage in the biodegradation were 7.0, 4.0 g/L and 1.0 g/L, respectively. On the whole, NaCl, the coexisted metal cations (Cu2+, Zn2+ and Cr3+) and additional NH4Cl inhibited the biodegradation of PDM/ZnO. PDM/ZnO was suggested to adversely affect on microbial community structure and activity. Optimum conditions for Fenton treatment were 50 mg/L Fe2+, 20 mL/L H2O2 and pH 2.0. Biodegradation showed that 64% of PDM/ZnO was removed. Besides, the combination of Fenton post-treatment could achieve an over 97% removal of PDM/ZnO. Thus, Fenton process combined biodegradation pre-treatment can act as an effective method to remove PDM/ZnO.
Assuntos
Poluentes Químicos da Água , Óxido de Zinco , Biodegradação Ambiental , Análise da Demanda Biológica de Oxigênio , Peróxido de Hidrogênio , Oxirredução , Poluentes Químicos da Água/análiseRESUMO
The incorporation of ZnO into biochar has become a promising way to obtain adsorbents with enhanced adsorption capacity. In this study, a low-cost ZnO-sludge biochar composite (ZBC) was prepared by a simply in situ method using sewage sludge biochar (SBC) and zinc acetate, as well as employed for Cr(VI) adsorption in water. The results of XPS and FT-IR suggested that the ZBC surface had more functional groups such as -COOH, -OH, -C-O, ZnO, etc. Compared with SBC, the BET-specific surface area of the ZBC increased from 8.82 to 41.24 m2·g-1, which provides potential advantages for Cr(VI) uptake. Benefiting from ZnO incorporation, about an 18% increase in Cr(VI) removal efficiency was obtained. The maximum removal efficiency and equilibrium adsorption amount of ZBC for Cr(VI) reached 98.4% and 33.87 mg·g-1, respectively. The adsorption was spontaneous and endothermic nature, and coincided nicely with pseudo-second-order kinetics and Langmuir isotherm. The analyses indicated that Cr(VI) removal by ZBC was predominantly via electrostatic attraction, surface complexation, ion exchange, and reduction. This study provided valuable insights into the problem of sludge disposal and provided a new and effective method for Cr(VI) removal.