RESUMO
With poly(3-hexylthiophene) (P3HT) nanowire (NW) inclusion in active layers (ALs), organic solar cells (OSCs) based on P3HT donor and indene-C60 bisadduct (ICBA) acceptor showed power conversion efficiency (PCE) improvements for both bulk heterojunction (BHJ)- and bilayer (BL)-structure AL devices. The PCE increase was approximately 14 % for both types of P3HT:ICBA OSCs. However, improvements in short-circuit current density (Jsc ) were about 4.4 and 6.4 % for BHJ- and BL-type AL devices, respectively. A systematic study showed that the addition of P3HT NWs did not result in enhanced internal quantum efficiencies for either type of device. However, the difference in light-harvesting efficiency was important in accounting for Jsc variations. Interestingly, there was no correlation between Jsc and PCE variations, whereas the open-circuit voltage (Voc ) and fill factor (FF) showed correlations with the PCE. The variation in FF is discussed in terms of Voc and equivalent-circuit parameters based on a nonideal diode model.
RESUMO
Positive aging has been reported to be effective for enhancing electroluminescence characteristics of quantum dot (QD) based optoelectrical devices. This study investigated the intricate mechanisms underlying the positive aging effect in quantum-dot light-emitting diodes (QLEDs) influenced by encapsulation with ultraviolet-curable resin. A 120-h analysis assessed the impact of the resin on the electron transport layer and emission layer, utilizing a strategically positioned perfluorinated ionomer (PFI) interlayer. The PFI layer effectively delayed the Al2O3 formation at the zinc magnesium oxide (ZMO)/Al interface and further reduced the interactions within the QD/ZMO interface, thereby curtailing exciton quenching at the interfaces. The time-sequential effect of positive aging demonstrated that resin encapsulation effectively passivates the ZMO surfaces after 12 h. The positive aging facilitated the reaction between aluminum and oxygen from ZMO, contributing to Al2O3 formation within 48 h of aging. Furthermore, positive aging passivated the defect states of the QD surface and the QD/ZMO interface, reducing exciton quenching at the QD or QD/ZMO interface. The enhanced electron injection and reduced exciton quenching resulted in aged InP QLEDs, exhibiting an external quantum efficiency of 12.04%. This is a significant increase from the 3.16% observed in the control device. Finally, a sequential mechanism of positive aging in InP QLEDs was devised, providing new insights into the time-related operation of aging agents. This study elucidates an advanced time-resolved mechanism of positive aging, thereby offering valuable insights into the intricate dynamics of excitons within the domain of QLED physics.
RESUMO
We report the fabrication of efficient indium-tin-oxide-free organic solar cells based on poly(3-hexylthiophene-2,5-diyl):[6,6]-phenyl-C61-butyric acid methyl ester (P3HT:PCBM). All layers of the devices from the lowermost silver nanowire cathode to the uppermost conducting polymer anode are deposited from solution and processed at plastic-compatible temperatures<200 °C. Owing to the absence of an opaque metal electrode, the devices are semitransparent with potential applications in power-generating windows and tandem-cells. The measured power conversion efficiencies (PCEs) of 2.3 and 2.0% under cathode- and anode-side illumination, respectively, match previously reported PCE values for equivalent semitransparent organic solar cells using indium tin oxide.